Videos and Windows Server 2012

Similar Questions

• CF 9 and Windows Server 2012

  The installer has announced will work for CF 9 as well, so that CF9 runs on Windows Server 2012?

  New supported platform for ColdFusion 10

  Adobe Announces Microsoft Windows 8 and Microsoft Windows Server 2012 platform support for ColdFusion 10. 10 ColdFusion windows installers have been updated to support new platforms. Installers can be downloaded from the ColdFusion 10 product downloads page.

  Last 10 ColdFusion Windows installers,

  1. Support of Windows 8 and Windows Server 2012.
  2. Support 8 Internet Services (IIS8).
  3. Include the JRE 1.7 update 15.
  4. Include ColdFusion 10 mandatory update.

  Important note: ColdFusion 8 of 10 update must be applied with the latest windows installer 10 ColdFusion. For more details refer to this article.

  CF9 not supported Windows 2012.

  http://wwwimages.Adobe.com/www.Adobe.com/content/dam/Adobe/en/products/ColdFusion/PDFs/Col dfusion9-support-matrix-4 - ue.pdf

  Odd Windows 2008 r2 is not on the list of support CF9 yet many people use this platform.

  HTH, Carl.

• DPM 2007 and windows server 2012

  32 bit System Center dataprotection manager 2007 can use windows server 2012?

  I installed the recommended updates - file DataProtectionManager2007-KB959605 and x86_DataProtectionManager2007-KB970868, but I can't install dpm on windows server agent 2012

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Or here at TechNet Data Protection Manager - File Protection:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=dpmfilebackup

  TechNet forums of Data Protection Manager.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=dataprotectionmanager

  See you soon.

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• WAAS for RADIUS and Windows Server 2012 NPS server configuration

  I have trouble getting our WAAS to authenticate devices and connection via RADIUS.  Running NPS on Windows Server 2012.  Confirmed that my device WAAS can ping the IP address of the RADIUS server.  Using the attribute Type of administrative service under network policies.  Look in the event viewer, I get an error with event ID 15, "a malformed RADIUS message has been received of the xxxx-WAAS-01 customer. The data is the RADIUS message. »

  Right now, I can connect with only the local default user and password name.  Here are a few config for WAAS, running version 6.2.1:

  RADIUS server key *.
  Server RADIUS auth-host 10.194.10.13 port 1645
  !
  connection of local authentication enable secondary
  enable login authentication RADIUS primary
  local authentication configuration enable secondary
  Service radius Authentication configuration Select primary
  failover of authentication server unavailable

  I confirmed that my shared key is entered correctly on the WAAS and the NPS.  I have the switches/routers Cisco works well on the same RADIUS server.

  Someone had a bit of luck plug their WAAS to RADIUS devices using Windows Server 2012 and NPS?  If so, please share additional measures you have taken to get things to work.

  Hi Paul,.

  Based on the RADIUS error you probably experience failure CSCva14731. This was discovered with Cisco ACS, but can affect other RADIUS servers.

  To confirm, you can check the corresponding error in syslog WAAS:

  authenticate: % WAAS-UNKNOWN-3-899999: pam_radius_auth: talk_radius: RADIUS server did not respond (timeout 5 (sec))

  Also, this defect would not affect peripheral on software 5.x WAAS.

  The problem will be solved in 6.2.3 to come free.

• ACS and WIndows Server 2012

  Hi all, anyone know if there is a Remote Agent who will install and run the Windows Server 2012? I know that we are far behind the code releases, we run 4.2.0 ACS. We waited for ISE to incorporate GANYMEDE +, because it's the only thing that we still use ACS for in our environment. Our server team is eager to improve our DCs to server 2012, and I'm not sure that there is a remote agent that we would always tie back our ACS accounts to domian credentials. Please notify.

  If we improve ACS 5.X am I right to think that, like ISE, there is no need to load a remote agent on the DC?

  Remote agent does not support windows 2012. Only 5.4 ACS task soustenans 2 glass 2012 and who does not need remote agent because it uses inbuild Adagent talk to active directory.

  5.4 ACS patch 2 supports Windows 2012 AD.

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  Kind regards

  Jatin kone

  * Make the rate of useful messages *.

• EMC XtremIO Gen2 table, vSphere 5.5 and Windows Server 2012 R2 EFI

  We spin the new array of XtremIO Gen2 a POC of EMC and discovered a problem with customers running Windows Server R2 2012 or the EFI firmware. The details are in the blog below, but the goal here is to ask for the community of entry of anyone else running on XtremIO with firmware Win2k12 R2 and non - R2 and EFI/BIOS. EMC support is also working on this subject, so I can finish to post my reply here. Nevertheless, community information XtremIO is so limited (because of his November GA), I hope that this will make a difference.

  Blog/details: XtremIO Gen2 EMC and VMware: bcTechNet

  Environment:

  Dell PowerEdge R810/R820 hosts

  QLogic CNAs 8262 (5, 5-compatible firmware/drivers)

  Switches-Cisco Nexus 5548UP

  FCoE to guests; CF storage

  3Par T400 source of storage (FC 4 GB/s)

  Target storage XtremIO Gen2 (8 Gbps FC)

  VMware vSphere, ESXi 5.5 Build 1331820

  The Windows Server 2008 R2 (BIOS), 2012 (BIOS) clients and 2012 R2 (EFI)

  Storage 3PAR - no problem with all the guests

  XtremIO storage - can not (re) start guests R2 EFI 2012

  After a few weeks of troubleshooting by engineers from VMware and EMC/XtremIO, the question was determined to be a problem starting EFI replace a block of 7 MB in the XtremIO table, which filled the queue, and who would never clear that he expected more data to complete the communication (i.e. deadlock). This seems to happen only with firmware of EFI VMs (tested with 2012 Windows and Windows 2012 R2) and the question is on the end of XtremIO.

  The good news is that the problem can be mitigated by adjusting the Disk.DiskMaxIOSize parameter on each ESXi host by default 32 MB 32768-4 MB (4096). You can find it in vCenter > Home > Configuration > advanced settings (from the bottom) > drive > Disk.DiskMaxIOSize. The XtremIO team is working on a permanent fix in the meantime, and the workaround can be implemented hot with no impact on ongoing operations (potentially minor host CPU load increase as ESXi breaks > 4 MB e/s in MB 4 pieces).

  The rest of the ventilation on the latency, small block IO, etc. can be read here: XtremIO EMC and VMware EFI | bcTechNet

  Thank you, Darius, and EMC/XtremIO team.

  -Chris

• What is the difference between windows server 2008 and windows server 2012?

  I'd be grateful if someone could give a comparative perspective of the two products.

  Hello LSAKR,

  Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question about Windows Server would be better treated in the TechNet for Windows Server forums.

  Click here to transfer your question in the general Windows Server 2008 forum.

  Sincerely,

  Marilyn

• How to install windows server 2012 and windows 7 or 8 on the same computer

  Hi, I want to install windows 7 or 8 and on the same computer that I want to install windows server 2012 or 2008 I have not decide which one to buy again, and my question is, at the time where there was windows xp and windows me (x 9) for example, you must install first as millennial basic then install xp on another partition in my case I want to know is - it possible to do it without the virtual machine, and if this is the case, which windows must be installed first as the basis...

  Thanks a lot for taking time reading this, looking forward to your reply...

  You will need to ensure that the old version of Windows is installed first of all, in this case (Windows 7), then you can install Windows 8 or Windows Server 2012 after on logical partitions. Please see the following:

  See the following for how to dual boot Windows 7 and Windows 8 (the same principles can also apply to Windows 7 and Windows Server 2012)

  How dual boot Windows Vista/7 and Windows 8

  If you plan to have all three installed, make sure that configure you partitions in advance with ample space for all three.

  See:

  http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• We license from microsoft windows server 2012 and I want to install Windows server 2008. Is this possible?

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Thumbnail option does not work in Terminal Server in Windows Server 2012 and server session

  This might be a stupid question.

  We have two Windows server 2012 R2 - TS and DC. The clients are connecting to TS and access the shared network drives present in DC. I always unchecked 'show icons, never thumbnails' and 'Show thumbnails in System Properties' enabled on DC and the two TS.

  No always thumbnail option.

  You will need to click on each image. Users have many files containing multiple images. It's annoying to click and view each image.

  Note: NO GPO is configured to block it. Checked.

  I can't find any object GPO to allow this option to be :)

  More info. For customers, anywhere, whether network shares or all folders in TS session. It does not work. Also tried painting and Windows Photo Viewer.

  Here, any help will be very appreciated!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 reboot w/dump (Standard Edition 64-bit (English)): w / a) CA ARCserve Backup version 16.5 b) JAVA JDK 1.7.80 c) Tomcat 7.0.59; Unexpect error and restart w/dump?

  Windows Server 2012: unexpected system error and restart w/dump?

  With the software running:

  (a) CA ARCserve Backup version 16.5

  (b) JAVA JDK 1.7.80

  (c) tomcat 7.0.59;

  (d) Symantec Endpoint Protection Version 12.1

  (e) PowerChute Network Shutdown 3. 1.0

  Should I plan to restart (I can only remote access) server for every 2 months?

  Running (without rebooting) non-stop over 6 months ago.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• What is the forest and the minimum area required for cloning a domain controller in Windows Server 2012?

  Please let me know the level minimum forest and domain functional, required for the RODC cloning Windows Server 2012...

  Hello

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  It will be useful.

• I downloaded Windows Server 2012 and don't remember my password.

  I WENT TO MIRCROSOFT.COM OR TECHNET AND DOWNLOADED WINDOWS SERVER 2012

  AFTER MAKING A PASSWORD FOR WINDOWS SERVER 2012 WHY WOULD TAKE ME TO THE COMMAND PROMPT

  AND I DON'T CHARATER UPPERCASE LOWERCASE AND SOME HAVE BEEN USED IN MY PASSWORD

  THEN, AFTER THE COMMAND PROMPT, I HAD TO RE INSTALL WINDOWS7 BACK BECAUSE I DON'T HAVE

  WHAT MAKE OF THIER MY GUESS IS DONE I HAFT TO TYPE SOME SORT OF COMMAND

  I JUST WONTED TO SEE WHAT WINDOWS SERVER 2012 RESEMBLED

  WAS THE ONLY REASION WHY I USUAL TO DOWNLOADED

  IM NEW TO THE SITE AS WELL AND I WAS HOPEING YOU COULD YOU PLEASE E MAIL ME WITH

  THE REASON FOR THE ANSWER I DON'T KNOW WHERE TO GO TO GET MY ANSWER IF IT WAS GOING TO BE PUBLISHED

  ON THE WEBSITE IT SELF INSTEAD AND YOU ALL DON'T RE NOT PLAYING PEOPLE BY

  SO here IS MY EMAIL ADDRESS * E-mail address is removed from the privacy *

  Hello mimi azzedine,.

  I suggest posting your question on our TechNet forums located here:
  http://social.technet.Microsoft.com/forums/en-us/categories/