J6480 prints 'back to front' even if 'forward to the rear' is set as default

Similar Questions

• Why is my desktop stop often randomly, at all hours of the day and night without prompting even when I use the computer. This is even though I changed the power option setting.

  Why is my desktop standby stop so often?

  It appeared sometimes several times per day or night. He stops consecutively, at random, at any time of day or night time. Even when I was with the computer, there is no incentive to me. The screen is blank. My computer nevers switch down. It's on 24/7-24 hours and 7 days, 365 days.

  It happened like this:

  1. you can hear the exhaust off the computer fan all of a sudden. There was no incentive. You can hear computer calmed down suddenly. The fan can be seen from the back of the grid of ventilation of the processor of the computer of the metal casing.

  2. the screen monitor suddenly stop. The screen is blank. The indicator light on the bottom of the screen of the monitor is always lit. He showed the monitor screen is on and running.

  3. When you look at the led on the computer, it is still lit. This shows that the computer has on photo and runnig. It is dormant, however.  He showed the computer CPU is entered in mode 'sleep'.

  4. whenever this judgment occurs, I would like to shut down the computer and restart the computer from scratch. I pressed the power button on the computer to stop it.

  5. I then press again the start/stop button to restart the computer, restart the computer, and then when she comes back to life, I clicked to restore sessions, and then I keep using the computer again.

  6. the process of restarting the computer was like that, as stops have been going like that for five months and is always like that, because I have been unable to solve. The point of contact in the power button is not more urgent are frequent.

  7. I changed the VGA cable as I said by a computer hardware that my problem could be due to the VGA cable is old, as in the VGA cable copper wire that feeds on the computer to the monitor screen can be broken or twisted, and so the video signals are not stable to feed the data to the screen of the monitor.

  8. Although I don't think that was the case, as my cable never touched the ground, or cluttered or kick or broken, I still went ahead to change the existing cable 15 pin VGA to 3 years with a new as it was only 3 males - the range of the cheapest I found in the shop costs...

  9. However, even if the VGA cable is changed, the stop is always the same, as before.

  10. on another month, I learned by my friend that I should change the setting in the computer mode 'sleep'.

  11. the new settings made in start/programs/system and Security / Option/power Power Plan/High Performance / 'Turn off display' to 'Never' and 'Put on the eve of the computer' to 'never '.

  12 even if I changed the setting of "Balanced (recommended) 'High Performance'" and two high-performance setting has been changed to "Never", the judgment fixed computer sleep mode, and as usual, no warning, the screen of the monitor erased.

  13. it seems the Option "power" and "Power Plan" and "Balanced" or "High Performance" in Windows 7 does not work. Window 7 does not in my computer.

  14. whenever I rebooted and restarted the computer, it is some normal time to see the operating system, repair files stop suddenly, before may be back from normal window of operation conditon.

  15. for more information,.

  My computer is not a brand. It was customized and installed. He bought two or three years ago. The use of the 350 GB hard drive is used by 50%. The computer in the past goes to sleep when there is no movement of the mosue for 15 minutes, or when not in use. He wakes up again when there mouse moves to restart the CPU and turn on the monitor screen.

  Now, he had problem with this kind of stop suddenly attack never wake up its "sleep" again during the month five, which I believe it was several viruses in the files of e-mail in the past months, and when it is very likely that I downloaded from CNET some cleaners or anti-spyware.  I don't know what problem is.

  I then withdrew them a month later of the program/Control Panel / uninstalled program. On the advice of my friend, I then changed version free download AVG.

  16. the information contained in the computer, start/program/computer/properties, gives the following information:

  It's Intel Core Due E7500 @ 2.93 Ghz, 4 GB of Ram, 32-bit operating system, windows 7 Home Premium, 2009.

  It is a Microsoft Firewall protection and is installed with fre download AVG anti-virus protection. He is shown to start/program/system and security / firewall /- and he said: 'Stat window firewall' is 'on '.

  17, finally, with the light of the foregoing, I would sincerely ask the Microsoft community to help solve this problem of closure. I would like to thank all the people in the community who can help me in advance here.

  18. I hope to hear your solutions with you. Thank you.

  Run "cleaners" or optimizers may have caused a number of problems.

  And since you have them installed some time ago a system restore won't help.

  Run the System File Checker

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Run a scan for malware http://www.malwarebytes.org/products/malwarebytes_free/

  Maybe to repair your installation of win

  Ensure that the chipset drivers have been updated by the author of the motherboard

• HP ENVY 120 - PRINT BACK TO FRONT

  Greetings!

  I found the back draw forward for other printers, but not for the all-in-One HP ENVY 120. I went through all the menus for my printer, but I can't find it yet. I'm sure that there is a way to do it, but I'm going to be hacked if I can understand it.

  I'm sure some of you guys know how.

  Diolch!

  Gwaredd

  Cymru am byth!

  You can print in a program or the printer itself? As a general rule, rear printing forward is a setting in the print options of the program that you use on your computer.

  -Spencer

• Firefox 16.0.1 opens on a white page, even if my home page has been set as default

  I upgraded to 16, and now the browser opens with a new page, even if I set the default to my home page. I tried several times to reset the home page but without success.

  See:

  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• Even though I checked the box to "set the volume on the taskbar icon", when I restart it's gone

  I need to uncheck the box and click on apply, then click on the box again and apply until the icon appears.  Only, this has happened for about six weeks.

  Hello

  After having placed the tick in the box place volume icon in the taskbar, it should show.

  Now do right click Taskbar > properties > customize > then in the active elements, you will see the icon audio click and right on the menu drop down click always display then click on apply then ok...

  See how you go with this...

  Greetings

  GT4U

• DeskJet 2540: Printing documents to printer back to the front

  Recently installed the above printer and it prints documents back to the front. I went in printing preferences, tab advanced but couldn't find an option to take it forward towards the rear for. Can you help me please? Thank you very much.

  Hello

  The Page order feature is no longer available for the latest drivers from HP, I suggest to use another driver to work around such a.

  Then follow the steps below:

  1. Open Control Panel, and then select devices and printers.
  2. Right-click the printer icon, then select printer properties.
  3. Open the Advanced tab, and then click new driver.
  4. Click on the next button and select HP in the production list, and then select HP Deskjet 6940, Deskjet 6980 or the Deskjet 5550 in the list of printers.
  5. Click on the next button and complete the wizard, and then click OK to complete the change
     Note: You can rename the name of the printer to its default name of the printer properties tab once the changes applied and the dialog box is closed.
  6. You can now change the order of the pages with the alternative driver on the Advanced tab.

  Please let me know if this helps overwriding the question,

  Shlomi

• printer has a paper jam, but no paper is in it, even when checking from the inside.

  so my B209a Photosmart has a paper jam but there is no book anywhere, even when take off the rear. I can't even print. so idk what to do. Help?

  A real paper jam and a false paper jam are troubleshoot-carried out in the same way. Please check the steps in the document located here.

  I hope this helps.

• HP Officejet Pro 8625: HP Officejet Pro 8625 impossible to change the order of printing back to the front and want to change

  HP Officejet Pro 8625 cannot change the order of printing back to the front and want to change

  The Officejet Pro 8600 driver has a 'Page order' option in the driver, and it is compatible with the Officejet Pro 8625.  You can install this driver in point 8.1 of Windows as follows: first download and install the driver Officejet Pro 8600 from HP here.  When the installer asks how the printer will be connected select "ignore the connection at the moment, I'll do it later."  After that go to printer and devices, right click on the Officejet Pro 8625, printer, advanced, pilot, new properties, then select a manufacturer HP (Hewlett-Packard) and select HP Officejet Pro 8600, next, done.  Click the Officejet Pro 8625 properties, general window and in the rear upper part called Officejet Pro 8625 (or what you want the printer named...), OK.  The Page order option will be available in the Advanced Printer Options tab.

  

  

• Hp psc 1210v all-in-one has the possibility to print back to the front?

  My hp psc 1210v all-in-one still works and it makes me crazy that this printer is able to print back to the front. I'm also disturbed that there is no software print double don't face as with the new hp printers.

  Is it just me or this printer would be perfect if it had these features?

  Thanks for the help.

  The link that you sent me was not big, but I looked around, in the Advanced preferences and realized that I was able to change the order of printing under layout options. I just had to click the underlined "front to back" and then I could easily switch to 'Back to Front '.

  In regard to feature double-sided, I'm looking for... I want to talk about the functionality of software (not hardware) which have more modern printers. As for my HP Photosmart D110, when I go to Preferences, on the right side there is an option for "print on both sides to save paper. This is the software update, I want for my psc 1210v. I would like to be able to select the option "manual" under the "print on both sides to save paper.

  Thank you.

• printing from back to front

  Why is there no option under settings document advanced (under printing preferences) for the officejet pro 8625 to change if you want to print the front to the back and the back to the front.  Each different HP printer I've owned has had this option.  Is there another way to change the printing order?  Thank you!

  That the message here, explains how to use the driver Officejet Pro 8600, it has the capacity you want in what concerns the order of the pages.

• HP officejet j6480 prints duplex, even if the duplex unit is installed. any suggestions?

  I can print but the printer does not print duplex not. He claims the duplex unit is not installed, even though I have the double (or triple) checked to make sure it is installed. If I want to print two-sided I re - insert the paper.

  edmpca,

  Try these steps that should help you set up correctly:

  1. click on Windows icon () on the taskbar > Control Panel > printers

  2 right click on the printer icon.

  3. click on properties and then click on the device settings tab.

  4. click on the plus sign (+) next to Options installable to extend it if necessary.

  5. click on the duplex unit to activate the menu drop down.

  6. click on the dropdown next to the unit duplex, then select installed.

  7. click on apply and then click OK.

  Let us know if it helps. Good luck!

• Stupid question, how does a print back to back on the Officejet 6600/6700?

  HP Officejet 6600/6700 model CV078A; Series: CN2231G0D9

  Vista 32 bit

  Could not find in the manuals or in the forum.  With recent HP printers, I was able to print on both sides of the paper (for example, 1 side = Page 1; Side 2 = Page 2).  I can't understand how to do this with this version.  Do not see it in no more printing options.  Simply print us page 1.  Place it in the paper tray; can print page 2?  What seems uncomfortable with such advanced machine.

  Any ideas?

  Thank you

  Thanks BH.  I think I found the solution.  Your advice on Duplex helped.  I sought advice and found that I needed to go to 'Print' > Options > Advanced > Print > and check "Print on the front of the sheet for duplex printing" and "print on the back of the sheet for duplex printing.

  I retried the print job, and it seemed to work.

  For the people of HP you this can be a problem in Microsoft.  I guess that your parameters to make up for it during installation.  Perhaps the settings I fall on an update of MS Word; Thus, others may work in the same question.

• I bought an iphone6s from Lithuania, EU. At the back of the box, it is printed "Aproved for use in all countries of the EU". Does this mean that I can't use it in Asia?

  I bought an iphone6s from Lithuania, EU. At the back of the box, it is printed "Aproved for use in all countries of the EU". Does this mean that I can't use it in Asia?

  It does not mean that you cannot use it in Asia. It cannot be repaired in the European Union, however, and may not work with LTE networks in other parts of the world.

• HP photosmart 5520 print do not correctly even with new ink

  I replaced the ink of color and black ink (364 cartridges). I have no error message or anything of what I see wrong. It is a wireless printer and when I print it always printed as ink cartridges are empty. Especially the black, when you're printing is a pinkish color. I took the cartridges and replace them in numerous amounts of times, and it seems to always print the same way. I don't know how to check the printer heads to see if it is causing the problem.

  Hello Daniellehenshaw,

  I'm sorry to hear that you are experiencing printing problems. I found the following troubleshooting steps for the e-all-in-one printer HP Photosmart 5220 which may help.

  http://support.HP.com/us-en/document/c03955472

  Please note that you have already completed the first few solutions suggested by replacing your cartridges and putting back them in place.

  I hope that one of the other suggested solutions work for you.

  Kind regards

  Lynn_B

• I have a hp D2600 printer and it not even not print test page,

  I have a hp D2600 printer and it not even not print test page,
  (2) when I was using the printer, ink color came out but not the ink empty

  Hello, IndranilDattagupta,

  Do you receive messages when this happens?

  What version of Windows are you using?

  It is possible if you have not used the printer cartridges can be dried.  Clean the printer and cartridges.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bpd06100&cc=us&LC=en&product=59862

  Use this troubleshooting page

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3742933&prodTypeId=18972&supportTaskId=42457