Videos Flash freezes and does not load

Similar Questions

• Updated my iPhone6 to ios10 and now my battery heats up and does not load

  Updated my iPhone6 to ios10 and now my battery heats up and does not load

  I have never experienced this with another iPhone or iOS version

  Of course, it's a problem because I use my phone all day

  What troubleshooting steps have been taken so far?

  Have you completed a reboot, reset or restore such as recommended by Apple?

  Best,

  GDG

• My charger Apple Watch emits a ticking sound and does not load?

  The round magnetic disc at the end of my charging cable is a "ticking" or clicking sound which seems to be the rhythm of a clock. He has recently begun and did not charge the watch. I tried to connect the cable to the USB port on the MacBook Pro rather than on the wall, but still, he clicks on and does not load. Is my favorite charger?

  Hello

  I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation in one goal of your Apple Watch and cable magnetic charge verified and, if recommended by Apple, repaired / replaced (whether under warranty, if it qualifies, or via the chargeable repair service):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  To check your warranty status (the serial number is on the back of your watch):

  • https://checkcoverage.Apple.com

• Download Nikon D90 photos via a cable of Photos does not work. The picture freezes and does not matter. Any ideas?

  Download photos of Nikon D90 Photos OS El Capitan 10.11.16 cable does not work. The picture freezes and does not matter. Any ideas?

  Try with Capture of Image (in your applications folder)

  LN

• Satellite U305-S7432 freezes and does not sometimes using Win XP

  Hello.

  I have a portable Satellite U305-S7432.
  Initially, it came with Vista, but I reformatted with XP Pro. I have installed all updates up to service pack 3.

  My problem is that sometimes when I try to restart the computer, simply, it freezes and does not meet any entry. I noticed that this happens if I close and then open the cover (which means that the computer goes mode sleep entry and returns).

  Please note that the splash screen works perfectly well and the computer wakes from sleep fine but then when I try to restart, the computer will simply spend time instead of restart.

  If it goes into sleep mode, reboot takes place as planned.

  I installed all the drivers and there is no question mark in Device Manager. I've updated the latest chipset from Intel (for the mobile 965) driver as well. Finally, I also tried to add /forceresetreg my Boot.ini file (as suggested: http://support.microsoft.com/kb/822624) but nothing helps.

  Any ideas?

  It is a series of laptop computers Toshiba us and you should check the Toshiba driver page for available drivers:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  If you will not find XP drivers for this page, then you can try to install unique drivers for Sat U300 since European Toshiba page but I not quite sure if these drivers XP will work on you Sat U305 Mr. but it s worth a try!

  Good luck

• attempts to send the message that is too long the Outbox - it freezes and does not allow me to delete

  Outbox is trying to send a message too long - can not remove it it freezes and does not

  Windows Mail. Whenever I try to go to the Outbox to erase the messages it freezes the computer.  I even went to tools and checked 'work offline' and it seems to ignore it.

  Follow this article help & Support:
  http://support.Microsoft.com/kb/941090

  t-4-2

• When I save my photos in Photoshop, it freezes and does not save my image?

  When I save my photos in Photoshop, it freezes and does not save my image?

  Hi ggonzal,

  Please reset the Photoshop preferences and then try again.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Related link: functions of files preference, names and places. Photoshop CS5

  Let us know if it helps.

  ~ Mohit

• My 'creative cloud' application freezes and does not download update - 'Installation update' freezes '0% '

  My 'creative cloud' application freezes and does not download update - 'Installation update' freezes '0% '

  In fact, I went to:

  www.Adobe.com/appsmanager/index.html

  and uploaded CC Desktop App from there.  Worked fine, thanks.

  Dennis

• Leave my Pro XI of Adobe Acrobat, reading documents and does not load my original CD.  Where can I download the program from the internet and my key code?

  Leave my Pro XI of Adobe Acrobat, reading documents and does not load my original CD.  Where can I download the program from the internet and use my original key Code?

  Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

• Bug - Flash CS6 help does not load

  New install of WIndows 7 (32 bit). Test Flash CS6 installation costs. Click Help > using Flash and nothing happens. Help does not load. Browser opens. Nothing happens. Even with the help > Centre de Support Flash. Also installed Photoshop CS6 trial and this system does help support (browser opens to the online help page). Flash CS6 help is completely dead. Does anyone else know this? Or better yet - how to fix?

  Hi Alec,.

  It is a known problem and you need to install Flash Pro CS6 help update to display help within Flash Pro CS6.

  Please let me know if you still encounter problems look a help.

  In addition, at any time you can view the last material assistance, learning and getting started with http://helpx.adobe.com/flash.html

  Kind regards

  Suhas Yan

• IPad 2 Air battery drained and does not load after update 9.3

  Air iPad 2 (Wifi + cell) battery has completely evacuated and no charge since after update 9.3. Update my device was 100% of the fees. Subsequently, when the update was finished, the Unit continued to lose the load during use (I got the full enjoyment on the charge) and does not charge even on not trying to load intermittently and for long periods. Once the load is complete evacuated after considerable use, I was unable to see the unit after 2-3% fees.

  I have restored and updated the device via iTunes, but the problem persists, and I see a battery on the scree with 3 red lines. When I take off the charge cable, I get a black screen with battery 3 red lines and a chart of the charging cable.

  I had once the apple logo and the ipad started and I had the interface momentarily, but he lost.

  I have been struggling with this for the last 4 days and have tried almost every single suggestion there. Connection to the support of people was not possible on the web. And I am currently in another country where he sold the IPad to be able to switch the device back to the Apple Store to have checked out it during the warranty.

  Any suggestions are welcome. TIA.

  Well, I had the camera to load up to 61% where it is blocked again.

  Here's what I did that I had not done earlier out of the many resolutions that I tried from that provided in the forums and on the internet-

  I put the IPad for a couple of hours in his keyboard case and then all located in a thin cloth and put it on charge, ostensibly to warm a little battery. The warm-up was suggested in another thread, where a person even went to the extreme of using a fan hair dryer to warm the device. After a few hours, he did to load up to 60%, I got it out to check if it worked.

  Maybe I shouldn't have checked and waited a little longer, because the IPad is now stuck at 59 to 61% for the last 14 hours for free. I still struggle to go beyond this percentage, but at least I can use the device. Is there something I can do now to improve the percentage of charge? I tried the resets and even restored and updated the iOS through iTunes.

  Hope the above helps someone.

• Satellite A65 freezes and does not answer after adding RAM

  Gents,

  My laptop Satellite A-65 has been upgraded to 512 MB RAM 1024 RAM. He acknowledged additional without any problem memory (as she should be determined according to the manual).

  But unfortunately after 1 day it started suddenly stops, images on the screen freezes, laptop does not at all - only reset (press and hold the power button / stop) can help. laptop computer sometimes is able to work 2-3 hours, but still stops.

  Cover of place of memory is rather hot, fan very often work uninterruptibly. so I can't decide if the problem is in the new map memory or not enough cooling or maybe by changing the version of BIOS (or BIOS setttings) and could be memory saturates and erases itself properly (last note was found on the forumes).

  Experts, to help find the exact reason especcially if you had the same problem.

  Hello

  I m not an expert, but I recommend you remove the new memory module and run the laptop only with the standard memory module.
  If the laptop does not cling and will not freeze then it s a very clear case for me.

  Either the second module is not compatible or defective.
  In my opinion, you need to use brand modules such as Kingston for example. The quality is much better as a module without a name.
  Use additional modules recommended by Toshiba

• Lightroom crashed (and caused my computer down) and does not load now. What should I do?

  Recently I bought lightroom and a week ago, I used it to change lots of photos so not only crashed Lightroom, but it caused my computer down as well. I have a surface with load and 3 pro, I was able to restart it. However, whenever I try to open lightroom, it does not load and possibly the computer says it does not. I am desperate to change these images, but not sure what to do to get lightroom to restart. What would you recommend? I have version 6.0...

  Hello

  Please, go to the Windows, where Device Manager, expand display adapters.

  Turn off the graphics card and open Lightroom, go to Lightroom preferences, then the performance tab, and then uncheck the option "use graphics processor.

  Lightroom farm and go back to Device Manager and activate the graphic card.

  Open Lightroom and then work in Lightroom and check if it works very well.

  Kind regards

  Tanuj Sandal

• Satellite P100-216 - power adapter continues to whistle and does not load

  Recently the adapter (black box on the AC power cord) on my satellite P100 began to whistle and does not charge the laptop, the machine worked that for about an hour and a half, then don't would not have thought that it was getting hot,

  any thoughts?

  Hello

  For me, it looks like a malfunction of AC adapter.
  I think that the cable must be broken, due to the fact that the adapter keeps whistling.

  I can give you only one advice; the adapter needs to be replaced!
  In this case, you should contact the ASP in your country and should ask for help.

  I m guys has can help you.

  Best regards

• Media player lost all music (but not music videos) and does not load the files in

  Player was working fine, then night emptied all music files and now will load all of the files, but will play them if you transfer to an unsavable playlist

  Hello

  Thanks for posting your query in the Microsoft community!

  I understand that Windows media player has lost all the music. I will try to help you with this question.

  Try these methods and check whether it is resolved:

  Method 1:

  Check the settings of the library in windows media player. Steps to follow:

  i. open Windows media player

  II. click on organize

  III. Select Options, select the Library tab

  IV. in the title of the newsletters of automatic support for files

  v. Select only adds the missing information

  Method 2:

  Rebuild the media database and check if that helps. Follow these steps to rebuild the database:

  i. Click Start, in the search box, type in %LOCALAPPDATA%\Microsoft\Media Player

  II. remove the Media player folder

  III. to restart the computer, the Media player folder will be automatically recreated. Check whether the problem is resolved.

  This problem occurs because the Windows Media Player library database is corrupted.

  Method 3: To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  3. Select all the files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  4. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type % LOCALAPPDATA%\Microsoft, and then click OK.

  3. Select the Media Player folder, and then click on Delete on the file menu.

  4. restart Windows Media Player.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  We can't wait to hear back on your part.