Vidya

Similar Questions

• HP Pavilion Notebook dv6318ea: force g n vidia go 7400

  I can't upgrade my laptop Hp Pavilion dv6318ea W8.1 to W10.

  This because HP did not support the Nvidia Gforce 7400 display driver in this notebook to go to W10.

  Will there be the W10 display driver for this laptop?

  any other suggestions?

  concerning

  Jan

  Hello:

  See if the info at the link below is a help to you... See the suggestion offered by msddjd.

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/cant-find-GeForce-7150M-nForce-630-M-driver-for-Windows-10/m-p/5175330#M126811

• force g n vidia go 7600

  I have a Pavilion dv9000 cto.  The graphics card does not (nvidia gforce go 7600). I downloaded the latest driver from HP, Nvidia and Windows Updates site.  I also reinstalled Windows XP SP3 operating system.  As soon as I install the graphics driver and back running the laptop, the screen comes with horizontal lines and it seems that it is starting, but after a minute or 2, the screen is blank.  I can only boot the laptop in safe mode.  Have a solution or heard of this problem?
  Thanks in advance for your answer.

  Hello:

  If you do a search on this forum, or the Internet in general, you will find many messages about the problems of overheating or failure GPU for dv6000/dv9000 series.

  More that probably your GPU is endangered and the motherboard needs to be replaced that would be throwing good money after bad.

  Paul

• Qosmio F50-10 b and win 10 update

  Hi all

  I'm under Win 8.1. 64 bit on my laptop Toshiba Qosmio F50-10 b and I'm having problems in upgrading my OS to win 10. View Upgrade Advisor I can not upgrade because my NVidia 9700 M GTS graphics card. What would cause problems as giving advice to my screen.
  Then I would ask if someone whit the same problem and what could be the solution. It has to do with the age of my laptop (6 years), with drivers of graphics cards, or with new microsoft OS srecifications? Toshiba will do something on it or its place at Microsoft and N Vidia to solve the problem?

  Thanks for reading this

  George

  I can't talk to you much the upgrade of Windows 10 on this model of laptop because Win 10 is not released now... it takes a few days before the official release of Windows 10...
  Also, I guess that after version 10 of Windows, the manufacturers of devices (e.g. nVidia) will release Win 10 drivers too...

  But it is pending if your graphics card will receive the drivers Win 10... We'll see...

• HP Advisor

  I have a message on HP Advisor to create system restore CDs

  My question is - given that I will receive the upgrade to windows 7 - if I ever need to use the system restore CD can I still re - install windows7 from upgrade CD?

  Experience: that most brutal of teachers. But you learn, my God make you learn.
  (C. S. Lewis)

  Hello
  
  Upgrade Windows 7 HP offers only modernize Windows Vista to Windows 7. However, if you want applications that are provided with the unit also be upgraded to Windows 7 compatible software, it is recommended to create system recovery disks. Whenever you need to recover your system, you must first perform a recovery using the recovery kits and then upgrade to Windows 7 using the upgrade kit.
  
  Hope this information helps.
  
  Kind regards
  Vidya

• No GPU fan after upgrading the BIOS to 4.2 on Satellite P100-434

  Hi, I upgraded my BIOS today to version 4.2 and since the GPU fan only works during the splash screen, and once Vista has loaded, it never runs again, in addition, the CPU fan turns at a constant speed, and the screen has "shifted" to the right, so I quarter of the right hand of the screen on the left.
  As you can imagine, it's a little annoying, and to say that the GPU temp is 65deg. with 90deg all about processors. not too good for the material.

  Is could someone PLEASE tell me how I can downgrade the BIOS?

  I have fans and fences etc. are all and free from dust.

  I do turn all the appropriate toshiba of specific drivers, and I even tried to reinstall the NVidia one card.

  GeForceGo N-Vidia 7600

  Thanks in advance.
  Jack

  Someone else here had the same problem, according to the P100 support newsletters found here http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp you must update the nVidia Driver If you update BIOS v4.2

  Here is what says the newsletter:

  *
  Update the BIOS of the computer to the version 4.20 or newer:

  1. click on the following link to download the BIOS version 4.20 for Satellite P100. Save the file on the Windows desktop.

  You can also search for a newer version of this BIOS on Service and assistance from Toshiba site at support.tosiba.com.

  2. double-click on the file sp100v420.exe on the Windows desktop to start the driver installation.

  3. restart the computer.

  *
  Update the display of the computer to version 7.15.11.5666 or newer nVidia Driver:

  1. click on the following link to download the version of the nVidia 7.15.11.5666 display driver. Save the file on the Windows desktop.

  You can also search for a newer version of this driver on Service and assistance from Toshiba site at support.tosiba.com.

  2. double-click on the file driver_display_nvidia_os2007387a.exe on the Windows desktop to start the driver installation.

  3. restart the computer.

• Satellite L300 - 11 M and hardware upgrade

  Hi all.

  I have Toshiba Satellite L300 - 11M, but my video card is very slow and I can't play games well. So, I want to upgrade trought purchase new video card. But I do not know my laptopl support AGP or PCI connector only? So what is the best video card in N-VIDIA who support?

  Please help me. Thank you.

  To be honest, I doubt that such external graphics card would be really useful.
  According to this article, you can connect it to a USB port and in my opinion the USB 2.0 speed is not good enough to transmit a huge amount of data that accumulate through a game
  However, I've never tested it so I can't give details.

• Install SATA hard drive in HP A720n

  Hi, I use an old HP Pavilion A720n PC, has an ASUS motherboard. Computer is maybe 7-10 years. Don't ask me why, and I can't give an answer but love to tinker and learn to use older and newer computers. These days, the computer industry is, of course, will (or gone) to the SATA drives. I know little about them. But I see two ports or connectors on the motherboard, 1 is labeled 1 Sata and one is labeled SATA 2 - one is black, one is white. I bought a couple of adapters, but something does not appear here. Readers have 15-pin, then we're about 7 pins, and I see a 4 pin - (small rods, similar to the small connectors used to power of diskettes, etc.) on all of the power from the power supply connections.
  
  I don't know if I need one or two red Connector cables, for SATA and power supply connector or just pin 15 or just pin 7. Can I put several (SATA) hard drive in the computer or limited to one? And the computer will have to change in the bios or any where when I switch to SATA, if I can go. Any help will be appreciated. Thank you
  
  Ssmiley

  Thanks, Vidya, what I'm doing is trying to decide on a new computer, HP, or keep these two computers A720n. I have a Compaq, most recent, and a Mac book prorunning software mac Windows amd. So the 'old' may be in the form of hobby. Thanks for the info, I've touched the thumb, but not sure that it worked? I really apprehciate the response and INFO. Ssmiley

• HP a6330f PC

  I replaced the HD and the powerbox, installed Win 8, crashed today drivers (audio, mouse, keyboard, etc.) do not work. Where can I get the current drivers and how to install? OR do I just order recovery disks and start all the way?

  {personal info removed from the title}

  Vidya,

  Thank you for your response. I had to get a wireless mouse, and then the keyboard driver is out. I can sometimes finagel back by booting from the disc (64) win 8. At the time I learned where the box run is on Win 8 I had lost the keyboard again. The audio chain is HDAUDIO\FUNC_01 & VEN_10EC & DEV_0888 & SUBSYS_103C2A58 & RE

  Keyboard or mouse ACPI\VEN_PNP & DEV_0303

  If I end up having to use the wireless mouse, keyboard, audio, remove present drivers?

• Need driver VGA Windows Vista Ultimate 64-Bit for Qosmio G40 - 11 d

  Please, I want to know how to get the driver for Windows Vista 64 - bit for my Qosmio G40 - 11 d because I can not find in Toshiba driver downloads or N-vidia.

  Consult laptopvideo2go (dot) com - they got modded drivers nForce who will probably walk!

• Audio problem after installing windows 8.1

  I use a PC HP Pavillion Sleekbook 14.  I have upgraded to windows 8.1 and after installation my microphone is not working. Can I have help in the resolution of the problem please.

  Thank you so much Vidya. I would as soon as possible if the problem is solved.

• W510 brightness in Win 7 64 x

  Hello

  I would like to ask for help with the possibility of correction of brightness for ThinkPad W510. I want to put in place the brightness using Fn + key one (from level 0 to 15), but it is not possible to do. Down is correction of brightness goes in this direction: 15, 14, 13, 12, 11, 10, 9, 8, 6, 1. upwards is correction of brightness goes in this direction: 1, 6, 8, 9, 10, 11, 12, 13, 14, 15. Everything is OK, when I use the slider windows and the mouse in the Windows settings, but the correction of brightness using Fn + key does not work correctly. If I move the windows at position 0 brightness slider and then I start to pass the brightness Fn + key, so brightness is changed from: 0, 5, 8, 9, 10, 11, 12, 13, 14, 15. Upward even brightness evolves as first case. If I select with the brightness windows slider 2 position and then I start to pass the brightness by Fn + key makes it impossible to change the brightness on the position 1 or 0. I can only change up to the brightness Fn + key on 7, 9, 10, 11, 12, 13, 14, 15. If I move with the brightness windows 3-position slider and then I start to pass the brightness by Fn + key makes it impossible to change the brightness on position 1 or 0 or 2. I can only change up to the brightness Fn + key on 7, 9, 10, 11, 12, 13, 14, 15. 4 post I cannot go down to the 0 position. Upward I can move with brightness level 7 ony, then along the prefiously case. For 5, I can go down only 0 level and only 8, 9 etc.

  This problem is beginning to form of purchase of ThinkPad (Win7 Pro 64 x). I also reinstalled Windows, but the reason was the same. Driwers has also been reinstalled (n-Vidia Lenovo Web site driwer), but the reason was the same. It has been tested several drivers, older drivers who wasn't for Win8 and to finally has been reinstalled driver and software for Fn + key (hot key) features.

  I would use the correction of brightness by using Fn + key steps, please.., is someone who knows what I can do?

  BTW: I am sorry for my mistakes, I'm not English.

  Thanks a lot for an answer.

  Try this registry patch in a solution of this thread?

  https://forums.Lenovo.com/T5/ThinkPad-T400-T500-and-newer-T/ThinkPad-T410s-problem-with-brightness-c...

• Need installation disk for Windows XP Edition family fo Compaq Presario S4020WM.

  Hello

  I'm running a Compaq Presario S4020WM and have Windows XP Professional (Service Pack 3) installed.  I got this computer as a gift and it came with this operating system.  The operating system is not a genuine copy of windows (he says it's a version of test on my desktop wallpaper).  The sticker on the computer, says that he supplied with Windows XP Edition original family.  I would like to reinstall Windows XP Home Edition on the computer, but I don't have the installation disc.  I contacted the web site of the window and chat with technical support.  They asked me to contact the manufacturer of the computer for my specific product key installation disc.  My product key is [personal information deleted], my product number is DK214A and the S/N is[personal information deleted].  I know I am not pleased under warranty, but I would be eternally grateful if you could send me the Installation disk for Windows Home Edition for this particular product key.  Thank you.

  Vidya has already pointed out, the HP recovery discs are available for purchase at the third-party provider ComputerSurgeons.com

  There is a direct link to order No. 5069 - 5087 - Windows XP Home SP1 recovery (33NAHERED4) - Compaq discs model S4020WM on the ComputerSurgeons Web site.

  Please send Bravo

• Laptop HP G60t-500 - cannot find the DVD burner driver

  Hello

  I upgraded my laptop G60t-500 for Windows 8.  I had to reinstall some of the drivers in compatibility mode and overall, it works ok (thumping audio does not work, but I get audio with USB speakers) However, I just noticed that the DVD RW drive does not.  In Device Manager, the hp DVDRAM GT20L reports the following error message:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  I was looking on the site of HP support pilot for the original drivers for the DVD RW drive but can't seem to find them.  I found the HP DVD Play software and I was wondering if it needs to be reinstalled.  Or I have to look elsewhere for the device driver?  Or should I uninstall and leave the machine to find the driver.

  As a record, when I right click on the device in Device Manager and select "Update driver software", select the option to let the computer find the right driver, he again reports the correct driver is installed.

  Any help would be greatly appreciated.

  Thank you

  Carol

  Thank you, Vidya.  I had to reboot and now my machine 'sees' the DVD player and it's working (I tested it using a DVD for playback and serious files).

  Thank you!!

• HP Pavilion a1767c Vista Home 32 bit - BIOS update failed

  The unexpected happened by updating my BIOS, we lost the power.  Once the power came back, my machine was bricked.  I get the error of Checksum BIOS's Boot Blocker

  I did some research and found that I could re-Flash my BIOS so I could boot to a CD or a floppy disk.  I don't have a floppy drive, and after many attempts, I learned how to create a bootable CD with PHLASH16 and the extracted from the update of the BIOS ROM file that I had downloaded from the HP support site for my computer (sp37378.exe).  The question is the program flash will not read the ROM file that I've extracted from your exe file and I can't find the original file for the BIOS on the HP website.

  Am I right in thinking I can reflash my BIOS?

  Can you help me to loacate the worm/Date BIOS:

  Phoenix Technologies, 5.08, 12/08/2006?

  Thank you for your time and help,

  Ken

  From another thread, I started looking for a copy of the Bios file, I found my answer.  I tried to use the tool of phoenix bios when I should have used the bios awards tool.  You can search for "BIOS for Pavilion a1767c Vista 32 bit" for the full net.  Here is the comment that has saved my pc.

  Thank you all for your time and your help.

  Please try the file downloaded from the following link... some details are also provided in the readme files:

  https://SkyDrive.live.com/redir?RESID=1FFCCA6FE63FD77! 214 & authkey =! AOYevSziujFH8oQ

  I am an employee of HP.

  Kind regards
  Vidya