View 6: Blast gateway Gateway stopped, VMware view Horizon Blast Gateway Service lasted less than 1500 milliseconds

Similar Questions

• Windows keeps stops with the error message NOT driver IRQL less THAN or EQUAL

  Using Windows XP on the desktop. Have spent days trying to solve. Getting the message "new hardware installed" but I did not. Had recent power outages in the region. Also have Norton Security Suite, which recently has been giving me the popups that my RAM is too low, but I seem to have more than enough. Have done a few sessions with chat support online Norton with "recovery" distance as well, but the problem persists. Seems worse at night. I'd appreciate a few tips, like this is to destroy my PC.

  What is your computer brand and model?

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

  There are better alternatives freeware to Norton for a user running Windows XP.

• Completely remove sdconf.rec connection server VMware view Horizon 6

  Greetings,

  I want to completely remove the sdconf.rec file downloaded from my connection to the server VMWare View Horizon 6.0.1. In previous versions, it was that I had to delete the Sdconf.Rec of C:\Windows\System32 and set the attribute to EAP-SecureIDConf under CN = < servername >, OU = server, OU = propriΘtΘs, DC = vdi, DC = VMWare, DC = int '0' but this attribute does not exist in version 6!

  Just deleting the Sdconf.REC file does not work, after doing that (even after a reboot) it always says "a Sdconf.REC file has been downloaded" when I check the settings of the connection to the server.

  Does anyone know how to delete this file in version 6? I'm this close just removed the server connection and security together and do a complete reinstall.

  Thanks in advance!

  Bram

  bverm wrote:

  Haha, Yes, it seems I was typing the variable wrong, changing the attribute now works, but I still see "an sdconf.rec file is already downloaded" even after change to the attribute and remove the sdconf.rec file in system32, even after a reboot of the connection to the server.

  This should be OK. What you did is invalidated the sdconf.rec file. It probably will always exist, but watch to see if it has been invalidated. that is, it should now be much smaller than your original and so not usable, which I think is what you wanted to achieve.

  If you want to just disable the RSA SecurID authentication, which can be made in view administrator.

  Please confirm.

  Mark

• VMware VDI vs VMware View Horizon?

  Hi all

  This should be easy for you, the gurus of VMware

  I have a requirement to expand a network of a single
  location central out for a large company and I am looking to use Thin
  Customers in the new corporate reach in a VMware VDI environment offices
  in the center of data centralized where we already have a full blown 5 of Vsphere
  environment for our servers.

  I was originally looking for VMware VDI via VDA (http://download3.vmware.com/demos/vdi/)
  and was sold on the idea that it would be a good choice given the WAN
  traffic to the Thin Client workstations based on RDP/PCoIP and so
  not particularly heavy.

  However since then looked back to VMWare View and this
  seeks to do the same thing that the VDI put in place and seems to have much more
  information about this.

  I first thought that VMware View Horizon set caching of desktop
  locally (as for a profile of the end user on the WAN) has no sound
  too good to the traffic congestion, etc. so I rejected directly at the exit!

  Can someone tell me if the VDI via the VDA solution has been replaced
  VMware View Horizon? And if so point me a definitive guide for VMware View

  Thanks in advance

  David

  Network humble himself in VMware engineer!

  The link in your feed was on VDM 2.0 which was the first iteration of VMware VDI market.    The most recent is VMware view Horizon which can be found here, Horizon of VMware View (formerly VMware View) (VDI) Virtual Desktop Manager | United States of America.     There is a lot of information on this page that you can see and if you have any questions please do not hesitate to post them in this forum.

• Working with windows 8 or 8.1 and 5.3 view Horizon using the VMware customer 2.3.3) slow scrolling and hesitate

  I was wondering if it's something big or something right in the House.  When the wired or without wireless on Windows 8 and 8.1 (laptops / tablets), using the client to view Horizon 2.3.3 I get hesitation to scroll in Outlook 2010 and Excel more large spreadsheets, that I don't see on my Windows 7 machines using the same client.  Anyone else noticed this or fix?

  Thanks for the tips...

  I know it's a bit old, but found the fix for our windows users tablet 8.1.   On the client itself, we have removed the cache of the client completely do the following steps:

  Create a new file as below.

  C:\Users\vditest\AppData\Local\Teradici\pcoip_client_settings.txt

  and write this line in.

  PCoIP.enable_tile_based_image_caching = '0 '.

• Sharing Internet connection and Application Layer Gateway Service

  I'm trying to connect my laptop to my XBOX 360 by sharing connection Internet (ICS). But when I try to go to the property of my wireless network connection to enable ICS, I get an error message that says: "an error occurred while Internet connection sharing was being enabled." So, I searched online for this problem and everyone says that a service required by ICS does not work. http://support.Microsoft.com/default.aspx?scid=kb;en-us;827328&product=winxp

  These services are:

  Application Layer Gateway Service
  Network connections
  Knowledge of the network (NLA) locations
  Plug-And-Play
  Remote Access Auto Connection Manager
  Remote Access Connection Manager
  Remote procedure call (RPC)
  Telephony

  I put each of them starts, and I manually activated them as well. However, the Application Layer Gateway Service turns off as soon as I turn it on. What is the problem? Do I have to change the setting of "connect as"?

  Hi no code of conduct,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP and would be better suited to the Technet community. Please visit the link below to find a community that will provide the support you want.

  http://TechNet.Microsoft.com/en-us/Windows/bb264763.aspx

  You can take a look at the event viewer for XP, here is an article to help you to start:

  http://support.Microsoft.com/kb/308427

  Thank you for using answers Forum.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• View horizon black screen

  Hello

  We have a working environment 6 view Horizon, and it works with view client and html. But today, I was at a customer, and when we tried my laptop, we where able to connect, but when I chose the VM, it goes to black screen and after 10-20 sec it disconnects. It must be something on the network of customers since it works from other places, and my laptop works also in other locations. I was able to use RDP, and HTML, so my question is then what do I the customer will have to check in their firewall? I thought that 'users' needs not what anyone special ports open on their side, thought it was by default ports that where free... but I'm not a guy to network... so

  Have confirmd with vmware support that this question lies in the customer network, problem with the old hardware when it comes to router / firewall... need to update firmware

• How many licenses do I take to view Horizon?

  I'm under VMWare View Horizon 5.3.1 generation-1634134.  How can I find out how many licenses I am registered?  I have a license code for a pack of 20 that I also have to add to the server, but would like to visually see how I have before and after I add the package of 20.  I also need to know where to add the license code for the new pack of 20.  I went to the product licensing VMWare Horizon administrator view, view Configuration and usage, change license, then entered the new code, but I get an error message of ' license data could not be obtained for this type of product ", so I don't know if it is when I enter the code or if I should add it elsewhere.  Ideas?

  View just wants to that you have a valid license and does no checking to verify if you are over your concurrent limit.    If you want to enter an additional license, you would edit license screen, but you wouldn't need to do if you need to unlock additional features.

• Installation of the Active Directory Management Gateway Service

  Help!

  I tried to install this on one of my Dc Windows 2003 Service Pack 2, Dot Net 3.51 and the necessary of KB. I desperately need the cumulative hotfix package that is mentioned in this article (https://support.microsoft.com/en-gb/kb/969166), so I can complete the installation. I desperately need this and sent by e-mail to Microsoft, but don't think I'll hear in the necessary time scale. I could cure it by installing dot net 4, but the company will not authorize the change this year. I wrote a powershell scripts to automate migration and don't have the time or skills to do it again in VB by Monday, any help gratefully received

  I get the following error message-question

  When you try to install the Active Directory Management Gateway service, the installation fails with the error "update does not apply to your system".

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Gateway of last resort and PAT

  Hello

  I have a beginner-ish question.  Currently, we have 2 ISPS enter into our router, sprint and comcast.  Our gateway of last resort is set to Comcast.  Our users are also access internet through PAT, with an IP of Comcast address.  If I change the gateway of last resort for the Sprint, what effect that will have on the users?  Are they going to send traffic through the Comcast line, since it is the address assigned to them, or they will send the traffic through Sprint?

  Hi Scott,.

  for the inside of the NAT, routing is always performed before NAT and Yes, you could use PBR to send traffic to the new stretch following ISP.

  Kind regards.

  Alain

  Remember messages useful rate.

• Standard CPHA Collection error: Journal of the view materialized on "INV". "" MTL_ITEM_CATEGORIES "younger than the last refresh

  Hello

  In the face of the error when running standard data collection - below

  "ORACLE in FDPSTP 6502 error."

  Cause: FDPSTP failed due to the ORA-06502: PL/SQL: digital error or value

  ORA-12034: Journal of the view materialized on "INV". "" MTL_ITEM_CATEGORIES "younger than the last refresh

  ORA-06512: at the 'APPS '. MRP_CL_REFRESH_SNAPSHOT', line 2474

  ORA-06512:

  +---------------------------------------------------------------------------+

  Beginning of the FND_FILE log messages

  +---------------------------------------------------------------------------+

  18 - NOV 12:54:49: simple, quick update

  18 - NOV 12:54:49: instant refresh error program: ORA-12034: Journal of the view materialized on "INV". "" MTL_ITEM_CATEGORIES "younger than the last refresh

  18 - NOV 12:54:49: in the procedure: handle_ORA_12034.

  18 - NOV 12:54:49: refreshing Snapshots a

  18 - NOV 12:54:49: individual instant refresh error: APPS. MTL_ITEM_CATS_SN

  18 - NOV 12:54:49: error: ORA-06502: PL/SQL: digital error or value

  ORA-12034: Journal of the view materialized on "INV". "" MTL_ITEM_CATEGORIES "younger than the last refresh

  +---------------------------------------------------------------------------+

  End of the FND_FILE log messages

  +---------------------------------------------------------------------------+

  "

  Kind regards

  Abhishek

  Check with DBA and increase the space in the tablespace apps_ts_logging related to this.

• window will stop in less than a minute, stops and restarts everytime I use the computer

  message-windows will be stop in less than a minute. appears, and then the computer stops and restarts. It's windows vista and it's this evertime I use the computer

  Hello

  ·        This happens randomly, or when you open any application on the system?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Check the event viewer for the newspapers and let us know. Follow the steps mentioned in the link below.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Method 1:

  Step 1:

  I suggest you to check in safemode, if the problem persists. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  I suggest you do a clean boot and see if the problem still occurs.

  To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Method 2:

  It may be there is a scheduled task on your system. Check in Task Scheduler and if there is no scheduled tasks then, remove and check if the problem persists.

  Automate tasks with Task Scheduler

  http://Windows.Microsoft.com/en-us/Windows-Vista/automate-tasks-with-Task-Scheduler-from-Windows-Vista-inside-out

  Schedule a task

  http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-a-task

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• VMware stuck Horizon and a long boot

  After a weekly update, the virtual machine in VMware View Horizon shows the status of 'Start-up' and won't allow no one to start on the machine, unless I have manually reset their machine. He has recently started to happen, there is no error message, it hangs just at the start. At other times, vm may take 10 minutes or more a long time to start. What would cause these issues? It is a 64-bit Windows 7 computer and no changes have been made.

  Update on the testing and very long webex with VMware - it turns out that the NTP setting on an esx host did not work - don't know how we missed. Once started, the time ends up synchronized (he was out of 10 min.). I am current test to check, but confident that the problem is resolved.

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• VMware vSphere profile focused on service of storage AND VMware vCenter Storage Monitoring Service alerts

  Hi all

  I installed VC 5.5.0b in-bound on a Windows Server 2008 mode. The Installation goes very well and everything looks good, but when I check the service of vCenter status it shows that both services have an alert

  The Services are

  

  I checked the log file vws.log and found the below error message

  [ ERROR com.vmware.vim.health.impl.ComponentSpec] Impossible to recover health for com.vmware.vim.sms of http://localhost/sms/health.xml

  ERROR com.vmware.vim.health.impl.ComponentSpec] failed to retrieve com.vmware.vim.sms from any of its URL of health health

  [ ERROR com.vmware.vim.health.impl.XmlUtil] Error recover health of url: http://localhost/sps/health.xml

  java.io.FileNotFoundException: http://localhost/SPS/health.XML

  at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown_Source)

  I tried steps below

  • I'm not using a port number personalized according to the http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2007834
  • I stopped the WebClient Service > > restarted VC Service but not go
  • The Windows Firewall is disabled

  My virtual database uses a custom instead of 1433 port.

  Please suggest what I can try next

  Thanks in advance

  This service is supposed to be there, anyway you can try to repair the installation. This article talks about re - install VMware vSphere profile Driven Storage service: upgrading to vCenter Server 5.0 Update 1, 5.1, or 5.5 fails and the Setup Wizard is interrupted (2017147)