View errors view Option

Similar Questions

• I lost the toolbar that displays 'file' 'view' 'edit' etc at the top, it is impossible to follow your instructions for using the 'View' option to fix my toolbars.

  I lost the toolbar that displays 'file' 'view' 'edit' etc at the top, it is impossible to follow your instructions for using the 'view' option to fix my toolbars. I have no idea how access toolbars without this toolbar - I can't believe this allows this toolbar to delete (I did accidentally while trying to get an another toolbar restored). Thanks for any help

  Hi toby,.

  on the assumption that you always have access to the navigation bar, right click on the stop button, when the home page is loaded and check the 'Menu Bar' option in the context menu that appears.

  If you need more help see the knowledge base article the Navigation buttons such as back, home, bookmarks and recharge are missing

  Daniel

• Cannot find the display in Code view Options button

  Hello

  To set the appearance of value encoding preferences in Dreamweaver code

  He said ""click the view Options button in the toolbar at the top of the Code view or the Code Inspector. " "

  However, I can't find it. If I click on Live, then I find it. But do not include the options Word Wrap, line numbers

  I'm wrong with something?

  The instructions are correct for the Code Inspector, but not for the document Code discovered.

  You can find options for Code view under view > Code view options.

  Some of these options are also available on the Code view toolbar, which can be activated from view > toolbars > coding.

• How can I save the changes on viewing options?

  Whenever I use Acrobat Reader DC I need to change the options of visualization of 'exposure of individual page' to 'Enable scrolling. How can I save this change on viewing options?

  And another question: when I open the Acrobat Reader DC, a tab appears on the right side with the options 'Export to PDF', "Create a PDF file" and others. How can I activate this tab does not appear when I open the Acrobat Reader DC?

  Hi daniel0108746,

  For your first question, I recommend you to go to the Edit Menu-> preferences-> category accessibility-> substitute Page display and choose "single Page continuous."

  

  And for the second query, please see the following doc: hide the Tools panel permanently in Acrobat and Acrobat Reader DC

  Kind regards
  Rahul

• What happened to the initial view options in the Document properties?

  What are the initial view options in the Document properties? I just updated my player and it is no longer accessible. SOS.

  Hi kga406,

  Please tell me if you are able to access 'initial view' tab in the properties of the document using Acrobat.

  You can change the initial view settings in Acrobat and you can view a PDF in Reader with the same initial point of view as established.

  Kind regards

  Ana Maria

• Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

  Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

  It looks like "snap to grid of pixels" just once more.

  Uncheck the box "align new objects to the pixel grid" in the menu of the transformation Panel.

  Select the objects and uncheck "snap to grid of pixels" in the transformation Panel.

• Error window options the boot environment

  original title: Environment error window options!

  Whenever I connect to my laptop, I get an error windowwith the message that Windows can not find the environment option that was entered.  Can someone explain what it means, what has changed and how get rid of? I am a novice with computers, so I hope that is nothing too technical.

  Hello

  ·         Did you the latest changes on the computer?

  I suggest that you check to see if the problem persists in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  If you are facing a similar problem in both safe mode, then I suggest that you do a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  It will be useful. Let us know for help.

  Kind regards

  Ramata Thakur

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• barsigner error: illegal option:-csjpin

  Hiya,

  Just tried the code signing statement to:

  http://docs.BlackBerry.com/en/developers/deliverables/23959/Signing_your_application_1422721_11.jsp

  While on the second stage of 'Configuration application signature from the command line', I came across the following error message:

  barsigner error: illegal option: -csjpin
  

  The command line I used is:

  blackberry-signer -register -csjpin XXXXXXXXXXXX -cskpass XXXXXXXXXXXX client-RDK-XXXXXXXXXXXX.csj
  

  Any ideas?

  Thank you very much

  H

  You have probably the old sdk installed and blackberry-signatory 0.9.1 is old.  Make sure that you run blackberry-signatory of the 0.9.3 sdk instead.  If you type blackberry-sign-help and she displays an option - csipin instead of option - csjpin, you are using the wrong, people old blackberry-signer.

• Is it possible to add a view > option additional component to Windows you have in Linux Gnome 2 environments?

  Normally, I'm a LInux user and I'm used to having the view > Extra pane option available.  Is it possible to add this feature to Windows?

  Thank God many people build great software anyway.  A lot of people would be crazy if impressive environment as Classic Shell extensions had that same attitude.

  Examples of what you can do for free.  There are many more API hooks available, anyone can build these features with Notepad.

  

• Interactive PDF page view options.

  Hello world.

  I'm confused with the page display options when you create an interactive PDF document to InDesign CS6.

  My 16-page PDF brochure was intended to be seen with two pages. As I downloaded it to a site that converts into a document, the document flip page that has in place two pages inserted into every single page - it seems to be to see each two-page spread on a single page.

  I tried a tutorial on page display options in InDesign and Acrobat during creation of PDF documents but have not found anything useful.

  What I did wrong and how get my PDF to view the pages properly? Is there a good tutorial or help page you can recommend which would cover the page display choices in these two applications?

  Is it possible to change document properties for my file already created PDF change the way pages are displayed or do I need to export the document again InDesign to fix this?

  Thank you in advance,

  Joe.

  You probably export your document as spreads instead of pages. Fortunately, you can change this in CS6 (in CS5 you couldn t)...

  Can´t you change very easily in Acrobat, change the display won´t settings help probably because you already 2 InDesign pages on each PDF page. Even if you choose to display single pages in Acrobat, you can see 2 pages at a time. I suggest that you re - export and change the setting marked with a red triangle (on the picture)

  

  If you think it is really difficult to re-export from InDesign, you can download handy little script for acrobat to:

  http://www.KHK.NET/WordPress/2009/03/30/splitting-PDF-pages/

  If the first page of your document is a single page, check the comments. I send a question about the rest of the first blank page, you can download a special version of this script which do... basic find a link right after my comment...

  I must warn you hard, pages just duplicate script and crop odd and even pages differently (you can also do it by yourself but it s quite tedious). Acrobat is notorius for its culture method. Any content of the page will not be destroyed, and most of (like flipping of the converters page) PDF processing systems will ignore the cropping and show all distributed anyway... so if it s possible to re-export, I would...

• Definition of "First view" options by default for new PDF files

  I usually want most of the PDFs I create to open the displayed pages Panel and "adjust to the window. Currently I open each PDF file and change it in the properties of the document under the "first view", save and close.

  There must be a better way.

  Is it possible to set the default type for all PDF documents that are newly created as part of the definition of job options?

  I searched in the components of different settings, but nothing helped.

  All advice appreciated.

  The initial view (IV) parameters are not part of the options when you create a new PDF, either in Acrobat or the Distiller.

  There are several options to apply IV depending on the version of Acrobat you are using. You can create an Action in Acrobat X that applies IV to any file open according to your needs and possibly save it as well. In Acrobat 9 or an earlier version, you can do a similar thing with a sequence of batch process.

  If you need to reach IV in the context of the creation while you can use a "epilogue.ps" script to add commands that Distiller will add to the PDF and link PS file to one of the presets of distillery distillers.

  Lori Kassuba has a blog post about this method.

• Smart View-> Options-> Member Options-> RadioButton 'Top' or 'Bottom '.

  Hello
  
  I installed Essbase 11.1.2 and uses Smart View with Excel 2007.
  I'd like to see total first and then on down the details below my total (instead of the top my total, which is the default behavior).
  Under Options-> Options-> member select Enterprise-> we can set the 'Low' on 'Top' radio button Has anyone tried this already? It works for you?

  Thomas, I discovered really only a way to display the totals of all. If you set up a SmartSlice you can choose your options where you want your ancestor will appear. You can choose to have it appear at the bottom of your retail or above. I hope this helps.

• In the Windows-left pane Explorer view options.

  How do you get Windows Explorer to open with the following folders not expanded:

  • Favorites
  • Recent locations
  • Libraries
  • User
  • Control Panel

  Ideally, I prefer recent locations and Control Panel does not display in Windows Explorer.

  TIA, Gerry Cornell

  Show all folders displays or removes the control panel and the trash of the Explorer folder tree. Right click on the (recent locations) items under Favorites for 'delete '.

  You might find this useful: http://www.howtogeek.com/howto/17415/set-the-windows-explorer-startup-folder-in-windows-7/

  None of my folder trees extend automatically when I open or Explorer but darn if I can remember what I changed. The only exceptions are favourites and libraries records recall the State they were when I closed last or Explorer... ie. If they have been expanded, they re - open wider and so reduced that they remain collapsed. If I view the Control Panel, it seems to behave in the same way.

• Windows Photo Viewer - how to change the default Windows Photo Viewer options so it will open the images directly in 'Real size' rather than the auto zoom

  Windows Photo Viewer - full size

  Hello

  Is there a way to change the default Windows Photo Viewer, so it will open the images directly in 'Real size' rather than the auto zoom?

  Thanks in advance, Yoni.

  Hi Yonikl,
   
  1 let me know the format of the file that is causing the problem?
  2. you have any third party photo editing and look at a software installed on your computer?
  3. do you have any recent software or the hardware changes on your computer?
   
  If there is any third party even software uninstall and check if that helps.
   
  You can follow these steps below to set the image at its actual size while watching.
   
  To display the image at its actual size, click actual size . To make the entire image enters the Windows Photo Viewer window, click on adjust to the window.
   
  For more information you can visit this article for assistance below.
   
  View and use your pictures in Windows Photo Viewer
  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer
   
  You can also try to download and install the Windows Live Photo Gallery and check if the problem persists.
  http://download.live.com/Photogallery
   
  If the problem persists then you can try these steps below to create a new user account and check if the problem persists.
   
  Create a new user profile.
  Now you must create a new user account and check the question of do you need to follow the steps
  below.
  a. open user accounts by clicking the Start button.
  b. click Control Panel.
  c. click on user accounts.
  d. family Safety.
  e. click on user accounts.
  f. click on manage another account.
  g. If you are prompted for an administrator password or confirmation.
  h. type the password or provide confirmation.
  i. click on create a new account.
  j.Type the name you want to assign to the user account.
  k.Click an account type.
  l.Click create an account.
  Now search for the question.
   
  If you still face the question, then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Materialized view option

  I've read a few articles, even a few answers here on the forum, but I have a few questions.
  
  The only thing I want is that my Materialized View updated every beginning of month. What I need to add to my code?
  
  CREATE VIEW MATERIALISEE My_view
  COMPLETE REFRESH
  START WITH sysdate
  FOLLOWING * (what I put here to update every beginning of the month?) *.
  WITH THE PRIMARY KEY
  AS my_query
  
  Thank you!

  It will give you the beginning of the next month.

  select trunc(add_months(sysdate,1),'MM') from dual ;