View on Equium M40X - no big screen with XP

Similar Questions

• Equium M40x does not work with connected AC

  Hi all

  I have a laptop Toshiba Satellite M40x-189, there little about 2 years and recently I have problems with it.

  The laptop when it is connected to the Board, the green light appears, but after 5 seconds it laptop turn off. the looks of dead battery, because it does not load normally, I keep connect and disconnect the AC, so that the orange light appear sometimes, sometimes for 5 seconds only. It's frustrating. When the drums come to start getting free he takes forever to be full. just at the moment where there is a load on the battery, that I can work on the laptop, even with the connected AC, but instead to use the AC laptop running on the battery, which usually lasts less than an hour, and then it's the bit of history.

  All I need is just to work with connected AC, because I normally just use the AC.
  Well I don't know what the problem is, can someone help me please

  Hello

  For me, it looks like a problem with the electronic power supply on the motherboard.
  I don t think that there is an adapter of wit AC problem itself or with the bad connection between the power supply and the Commission.
  If the AC adapter would malfunction the battery would not charge. But charges of battery, it collects a very slowly but it charges

  Finally I n t think you can do something you go to the service of your country. In such cases you re on the right side

• I'll be able to watch TV as well as the registered on my big screen?

  Watch tv

  IAM hang a HPLaptop my big screen HDTV with a vga to hdmi, also, I hooked a 950q of Hauppauge TV Tuner to the laptop. My question is that I'll be able to watch television and recorded shows on my big screen with this set up

  Technically, I don't see why not.  The cpomputer is essentially now a great passage by DVR device, although probably overvalued. ;-)

  The Hauppauge WinTV-HVR - 950Q (what specific model - model 01191, model 01176, model 0283?) allows you to watch and record TV, in a window or full screen. You can use the WinTV-Scheduler to record your favorite analog or digital TV shows using high quality MPEG-2. You can read your TV recordings to your screen any time.

  Your laptop, if you get it to display on HDTV, will deal with just the external screen as another monitor, and you can put whatever you want on it...  Including the output of the Hauppauge WinTV-HVR - 950 Q or his records.

• Replace a picture on a big screen?

  Hello

  I'd like to replace a picture big screen with a different video.

  Can someone give me a pointer iv tried a few different tutorials, but I can't find one relevant to this question. The shot of the screen is locked on and does not move.

  

  Any ideas?

  Thank you

  Philippe

  Effects--> deformation--> corners and no 3D layer.

  Mylenium

• Equium M40x screen: warranty issue

  Hello

  I've only had my Equium M40x for a week or two, and there is a very small fly which managed to crawl under the screen and to die in the middle of the screen. It is not huge, but it is very annoying, especially because I have not used outside and I got it for a short period of time.

  This kind of thing is covered under warranty? Any help appreciated.

  [Edited by: admin on 17 July 05 20:11]

  Hey Kevin,
  I doubt if this is covered under warranty, since it is not a component malfunction or failure.

  I recommend to contact your original provider and explain the situation to them as a first action plan. Well, they may be happy to exchange the phone for you.

  Otherwise, you call the closest to the Agent of Service Toshiba and ask them to quote you to remove dead insects. Of course, this can be done by an authorized service center or you will void your warranty.

  Good luck

• Workin in Live View mode when I press the zoom button to focus, I get a white screen with an x 5 or a wr 10 x

  Working in Live View when I press the zoom button to focus, I get a white screen with an x 5 or x 10 written.  I do not get the image of zoom.  He just started this today and I used it for years.  Any help?  Thank you.  OH, I have a 450 d (rebel xsi)

  Thank you very much

• Hi, after that I tried to load either a new or existing project into Adobe first Elements 9 I just get a grey white screen with any of the timeline, boxes etc. on the view. It happened suddenly, one day OK then not! At the top of the screen, I get normal

  Hi, after that I tried to load either a new or existing project into Adobe first Elements 9 I just get a grey white screen with any of the timeline, boxes etc. on the view. It happened suddenly, one day OK then not! At the top of the screen, I get the normal icon of pre, File, Edit, Clip, etc..

  I intend to have bought the first 13 items, it would be better if I bought a new program instead of downloading an upgrade, just in case the upgrade does not correctly load because of the error with my current program?

  If I have the deleted first Elements 9 on my PC would I lose all my existing videos that have been produced using Prime Elements 9 or would they be registered so that they can still be worked in first 13 items?

  First elements 13 works with Windows 7?

  Thank you

  Terry

  First 13 elements absolutely works with Windows 7!

  In fact, I highly recommend you download the free trial version and give it a test run.

  In the meantime, go to Windows Update and make sure you have all the updates of Windows, including those who do not automatically install it. Then go to the website of ATI / nVidia and ensure that you have the latest driver for your graphics card and go to Apple.com and ensure you have the latest version of Quicktime, by the requirements of the program.

• Two problems with my Equium M40X

  Hello

  Today, I've suffered two problems, earlier, that the computer refused to wake... I have posted before I have an Equium M40X and so I have no restart button. His arrival on a desk where the computer would not come out of sleep... so I had to pick it up, then remove the battery... While power is still.

  Then later the DVD/RAM started weird noises when I put a CD and she underwent a complete block place... same procedure applied. Only this time the battery does not recharge after such a unorthodox procedure... is this normal? I mean remove the battery in a way...

  Hi Jamie,

  The usual way of "forcing" a notebook of power off is to hold down the power button for 5 seconds. This causes the system to power down and then you can just turn it on normally.

  Kind regards

• Games with big screen

  I have a presario A 900 and vista of runing am I can only open games in a window full screen with two black bars down the flanks is it possible to change this? My computer is running in 1440 x 900, but my games don't fit widescreen. The size of the game window is also affected by changes in resolution in the game.

  As a response to this, the computer loses its large screen and I see the two black bars on the sides, that's without change, but I found the solution. I removed the boundries I have for my screen so everything can adapt to this topic. By removing these limits that zooms from my office in 20-30%, allowing to me manupulate all my windows that normally do not change. So by removing the boundries I can play the game as an image in the image display as well as a normal Internet window I can stretch the game to specfic size I want and leave it like that so that it covers the entire screen. Thanks for your help

• Very big problem with successful professional on-screen color in PS CC and CS6 win7 64-bit

  How to reproduce this problem:

  -Photoshop CS6/CC

  -Win 7 Ultimate 64 bit English with all updates.

  -ATI 7870 / 550 HD and the first graphics cards.

  -Dell U3014, CINTIQ 21UX (in the 7870), 2 samsung 2232 in the 5500 (all about, or one at a time)

  -Spyder 3/4 Elite, Display 2 Eyeone, DispCal (argyll), ColorEyes 1.60

  After calibration and the profile process with everyone from this screen with tools (lets assume that all is well), open an image with colors more saturated (with Adobe 1998 RGB color space) in CS6 or CC and press "F" key to turn on or off screens.

  You may notice that the saturated colors change (will become even more saturated) in the nest two screen modes and colors come back to the 'normal' fi hit F once more.

  Looks Photoshopped to get rid of calibration read in F 2 screens modes and return to normal when the image is in the initial display mode.

  PS: startups of Chargers of each calibration of the screen, chose one of the time when I restart the PC (so that there is no multi Chargers try to put your luts simultaneously)

  -PS CS6 / CC and the WINDOWS are completely up to date

  -Display card driver, are the last AND the windows certified

  -There is no other software installed on the PC that try to manage the map graphic, or even different CMS.

  -Actually Windows are a new installation

  -This RGB and CMYK images.

  It's very frustrating...:)

  Dear Lundberg, in fact I'm wrong on this subject arrive in RGB images, only happen in CMYK (some CMYK) mode

  If you have a Win 7 64 bit PS CS6 or CC update and calibrate your screen with a spectrophotometer, colorimeter and their respective software. Download images like this flowers:

  http://HDW.eweb4.com/out/663221.html

  Before, be sure to set in the PS, this attachad of color settings:

  

  Open this file, convert it to CMYK and press the F key to switch between display modes.
  If you have a calibrated screen, let me say, Eyeone and Coloreyes and the videoLuts charger is on, when you press the 'F', the colors in the CMYK image, will become much more saturated/heavy/dense, so click on the F button until the screen mode is 'normal', the color back to normal too.
  I test this behavior in 8 machines far and in all machines of this, the change in colors are very noticiable to reach a point that I can't be used in color professional work.

  I hope that now I could express my good self.

  Kind regards.

• Equium M40X does not work properly after upgrading the BIOS

  OK, well... I'm not a computer scientist, but I have a bit of trouble on my hands and I don't know where to go for the right help, so I came here.

  Today I started my lappy to confront an illuminous Green Office... not all it is green just of great spots here and there. Happened to me before, but it disappears after about 15 minutes, but today his guarded it usually hours and is still as he.

  I looked everywhere on the net for a possible fix but nothing helped, even though I've heard somewhere that an update of the BIOS might do the trick, so natually, I did... I came here and searched for my Equium M40X, found, downloaded and installed the latest version...

  but now I have a screen with a resolution of half of what it should be, it went from 1200 x 800 or something like that... to 1024 x 786 and I always get the green screen problem... the program toshiba provided for the update of the BIOS does a backup file (BIOS. (BAK)...

  I can't restore the old BIOS would set the screen resolution, but I'm just helpless as to how I go about it. I find the file, but I have no way to open/run it

  I've had this laptop for about 2 years now, I know probably just getting old and a bit tempermental, but if theres no way you people out there can help, I would much apreciate it :)

  Thanks a bunch - Ash

  Hello

  I Don t think the biosupdate is the reason for the reduced screen. It does not sound like a software thing, but rather a hardware malfunction.

  Is your normal screen during startup? If so, I'd say just remove your existing display drivers and install the new. But if it s like you described then it must be a hardware problem and the machine should be checked by a technician or at least a service partner.

  Would be better if your bring your machine to an ASP for a checkup of material.
  If you need assistance to find the ASP closest, try this link (the ASP index):

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome and good luck

• Equium M40X: I get to the banner of Toshiba, but Windows does not start

  When I start my 2 year old Toshiba Satellite M40X, I get to the banner of Toshiba, but Windows does not start. I tried using the recovery CD and it does not either.

  Any suggestions as to what could be the problem?

  Hello

  What do you mean with the banner of Toshiba? Did you mean the Toshiba splash screen that appears at the begging of the boot?

  Equium M40X successfully passed this screen?

  If the laptop is unable to switch to the home Toshiba screen then I presume that the BIOS has detected a hardware problem.
  In this case primarily the motherboard fails

  But if the laptop is able to spend the Toshiba start screen, the motherboard must be ok and only a 3rd device malfunction as HARD drive could cause this problem.

  Try to study a little

• MOD does not play on the big screen in Windows media player.

  I have a JVC's Everio camcorder and record in the MOD file.  The file was on the big screen but when I copy it to my PC and play in Windows Media Player, it shrink.  How can I solve this problem?  It's good that if I play the file in the software provided with the package.

  Help, please. Thank you.

  Hello Qooqoo81,

  Thank you for visiting the Microsoft answers Site.

  In addition to the response of aziz, you can use your favorite search engine to search for a program that converts the mod file to a file type that supports Windows Media Player.

  In addition, you can view the below link provided by the manufacturer of the device that includes additional information to play the video files on your PC.

  The Everio/Standard definition

  I hope this information is useful.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Several (TV) screens with Apple TV

  I use Apple TV AirPlay on a desk, TV for presentations (works fine), I can add a second TV screen if I use a HDMI HUB connected to Apple TV to view the same presentation on two screens at the same time?

  Thank you

  Jim

  Maybe, (more so cheap) hdmi dispatchers often don't work well with hdcp https://en.wikipedia.org/wiki/High-bandwidth_Digital_Content_Protection

• How to display the width of the page or the big screen in firefox 11 automatically?

  How to display the width of the page or the big screen in firefox 11 automatically? I know how to Ctrl +, ctrl - and ctrl 0, but is there a way to define 11 firefox to automatically set the page viewing by default "page width" or full screen (F11 not)?
  Help, please. Thank you.

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/