View sober con experiences software backup

Similar Questions

• Reinstall the os and software backup extrenal hard drive on newly formatted disks raid o

  I have a gateway dx420s there a HDD 160 GB, I want to do is first of all to buy hard drives of 500 GB to 3 two who will enter the computer and set up in raid 0 stripping data that the computer supports raid 0 or raid 1. first of all I want to save my intire system on an external hard drive. install the two new drives, their formatting, and then configure the raid in the bios. then reinstall the system from the external backup hard drive. My question is - is it possible in this way? It would save a lot of time from having to reinstall the OS and all software.

  Hi DALE_F,

  If you perform a complete PC backup image, you should be able to reinstall this image from backup to the new hard drive.

• Windows 7 photo viewer broken by the software update of Intel Corporation display published February 2012

  I tried the optional "Corporation - display - Intel (r) Intel's HD Graphics" offered by Windows Update.  The patch installed properly.  I also installed all the patches from Microsoft in the most recent update at the same time - my system is up to date with all patches from Microsoft for Windows 7.

  The Intel driver is identified as "Display Intel Corporation software update released in February 2012" with driverid = 20470193 (but doesn't link to winqual included).

  After I rebooted the system, I noticed that the Photo Viewer Windows 7 (Microsoft utility provided for the display of image files) was broken.  It would display usually several images, but after a few, trying to go to the next image would cause him to hang, with an error message and an error logged in the system log files.  The error logged has this information:

  Log name: Application
  Source: Application error
  Date: 14/03/2012-16:14:01 (typical, I have hundreds of this recorded error)
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: hp-8200
  Description:
  Name of the failing application: DllHost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bca54
  The failed module name: igdumd64.dll, version: 8.15.10.2653, time stamp: 0x4f3aac44
  Exception code: 0xc0000005
  Offset: 0x000000000030eb06
  ID of the process failed: 0 x 1284
  Start time of application vulnerabilities: 0x01cd021efd7da64e
  The failing application path: C:\Windows\system32\DllHost.exe
  Path of the failing module: C:\Windows\system32\igdumd64.dll
  Report ID: 3cc05019-6e12-11e1-8a89-2c27d725ab74
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1000
      2
      100
      0 x 80000000000000
     
      15411
      Application
      HP-8200
     
   
   
      DllHost.exe
      6.1.7600.16385
      4a5bca54
      igdumd64.dll
      8.15.10.2653
      4f3aac44
      c0000005
      000000000030eb06
      1284
      01cd021efd7da64e
      C:\Windows\system32\DllHost.exe
      C:\Windows\system32\igdumd64.dll
      3cc05019-6e12-11E1-8a89-2c27d725ab74
   
  

  The failed igdumd64.dll DLL is part of the Intel driver patch.

  I was able to revert to the version of the prior pilot with no problem using Device Manager (you cannot remove this hotfix with the usual methods to remove a patch provided by Windows Update, because it's a device driver).

  Once I have returned to the older version of the driver (with the old DLL) flaws with Photo Viewer problems went away.

  I don't use many intensive graphics applications, but I would not be surprised if this driver breaks things.

  I can't find any documentation on what, if any, problem known this updated driver is supposed to fix.  But he clearly presents problems that did not exist with the driver components, it replaced.

  I fully understand that driver development is a challenge, but this driver was clearly not enough tested if it succeeds in breaking simple things like photo viewer.

  The driver in question is provided by Intel and the same update available on their web site.  I could certainly follow your collective advice and completely uninstall the graphics driver (which unfortunately would my system using generic VGA graphics, completely ruin my desktop display) and then download the driver from the Intel web site, but I sincerely doubt that the outcome would be different.  Returning to the already installed driver seems to have "fixed" the problem with the update.  And I scored the driver Intel "fix" hidden in Windows Update, so that I won't be tempted to install again, since it's apparently a bad solution to a problem not specified.

  For what it's worth, the system in question is a HP Compaq 8200 "CMT", which has a motherboard Intel manufactured with integrated graphics Intel hi-def.  I don't have a graphics component snap.  Graphics drivers who settled on the system worked fine for my needs.

  Intel has released an updated version of this driver in February 2011, which, at that time, caused a wave of reports (many of them in this forum) driver Internet Explorer 9, in break with defects occurring all the same Intel supplied DLL. The driver that came with my system seems to have had this problem.

  If I was smart enough to understand how to report directly to the Intel they gave Microsoft a bad driver, I would, but as the component that is broken by the pilot part of a standard software for Windows 7 from Microsoft, I chose the problem here.  I'm sure that most of the Windows 7 users that could see a similar problem will seek a solution here, and for me, the solution was to return the driver (using the same procedures that were presented as the solution to the previous February 2011 broken Intel HD graphics driver "fix").

• Some sober questions HA, need backup?

  Senhores,

  Em um ambiente com HA, vcs nou3man Chipre fazer backup maquinas tolls?

  Lap EU explain.

  Tenho Doi client than tem Vmware online storages, um MD3000 em servidores e outro client com MD3000i, em 3 Años nunca Quebec as Vms pararam por conta storage, Vms ficam nestes/place. Estes equipamentos tem 4 while rede/HBA, duas controladoras, discos relief, duas fontes, sao equipamentos confiaveis dificilmente vemos um storage present um problema control para o Espaço todas as Vms.

  O launches fiz e um projeto HA alternative, using Veeam Backup & Replication, doi ESXi hosts, each host com Storage Iomega NAS as VMS para armazenar um, of replicaria o Veeam host um para o outro, colocando as Máquinas of our warehouses.

  So as o client por motivated padronizacao favorite usar tudo Dell, ele possui um host Dell 1950 PE 8 GB of RAM, vai put but getting memoria com a 24GO, este servidor possui Doi Intel Quad-Core da series 5500. Then will be comprado um novo servidor Dell R410 PE com 32GB RAM e Doi Intel Quad-Core e um storage Dell PowerVault 3200i, neste Modica like Vms, os hosts em HA storage using o vSphere essential Plus Kit.

  Then como o projeto ja esta el caro, descartarei no projeto a compra licencas of Veeam Backup & Replication e um armazenar extra storage para Iomega backup estes, como ver o game client tera equipamentos of ponta, e um storage URM inteligente, robusto, tem 1% chance to get um problema Sinestro comprometa todas as Vms.

  O as nou3man?

  Outra coisa, exist any restricao em um HA fazer using modelos diferent, mesmo sendo manufacturer mesmo servidores? Any restricao com processador por exemplo? Em projeto Québec fiz outro e postei ate na comunidade, U.S.., doi identicos Dell R410.

  Valeu pessoal, o projeto aqui, depower HA redesenhar e agora com e usar HA Veeam vSphere Essentials Kit Plus com.

  Ivanildo Galvão

  Cara, quanto ao HA, pode ser processadores different from which compativeis. Voce pode verificar is silt suportam e Mode VCA habilita-lo no ambiente.

  Outra option acertar e a Mascara of CPU (CPU mask) e um procedimentoum little but complicated mas works 90% back casos em.

  VCA sober Mode: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1005764

  VCA sober Mode 2: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003212

  Mask of sober of CPU: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1993

  Abraço!

• Registration with Pearson VIEW Oracle Certification - experiences

  * Please note that I already have an account with Pearson VIEW (but obviously wrt another Test program).
  
  
  
  * I made VERY sure that I hand by Prometric ID before starting the process.
  
  * on the first attempt through bigdelboy missed the radio button to say that his company was not a partner of oracle, he then allowed by field Oracle ID(Prometric ID) BS as I entered, so I returned it. He then forced me to confirm it on another page.
  
  * Then, I got the following response:
  

  Testing Programme Information
  
  Your request to add Oracle Certification Program has been forwarded to our Testing Programme team. If you provided a valid email address, we will notify you when your request has been processed. This typically occurs within one business day. You can also return to this site and check if Oracle Certification Program has been added to your list of Testing Programmes.
  
  Thank you for your interest in Oracle Certification Program!

  I did about 14 September 2009 13:30 CEST.
  
  
  I will update the thread in the course of things...
  
  
  -Key points are:
  (0) If a recording is in progress with Pearson VIEW for the first time so don't forget your registration information.
  (1) ensure a has its former Prometric ID at hand (and never publish it on the web - or disclose to anyone).
  (2) there may be a delay by adding the test Oracle on its profile program; and we can't plan reviews until it ends.
  -I couldn't imagine that there may be a delay with what happens in the next few weeks,
  
  (3) somehow I feel nervous about this if I have completed a review of Promteric, or had completed a Prometric Exam in the last days.
  (4) my Pearon VIEW and Prometric addresses match... This could help my cause.
  
  
  
  Please note that this is progressing well so far... I'm really just share my viewpont experience
  
  Published by: bigdelboy on 14-Sep-2009 08:21 - well, I left 3 hours and tried to tether at Pearson for Oracle and it said:
  Before you continue, your account must be updated. Please go to add the test program to add the Oracle Certification program to your profile.
  
  Which is the same info, I entered before so I did not need to be reintroduced to it. I'll try again some time later.
  
  PS: - either by the way, I noticed that... [http://www.pearsonvue.com/about/release/09_09_01_oracle.asp]... so my mugshot and covering scribbles will be captured.
  
  Published by: bigdelboy on 19-Sep-2009 23:09 (change of title of bigdelboy experiences of experiences that others have contributed in a significant way)

  Comment: Email received at 6:23 with the new user name and temporary password
  -not the choice to use a specific user name. Well, guess this is written down!
  Action: Connect, forced change of the password
  -password strength is monitored. good thing I have a forte in my rep stardard

  Concluding observations:

  My first name, middle initial and name (for printing in the certificate) have been converted to lowercase, without the possibility to fix this. Personal profile page says I need to contact customer service to fix this. (LOL)

  None of my history of test is transferred. The page says it's 'history of Pearson VIEW tests', so I don't know if that still counts.

  It's a "first registration" moderately painless with a VIEW. Just took a little time and patience.

  Certainly, it feels like screens and traffic were never really completely tested by someone outside the development environment - they 'work', but don't let the taste to have been done by a professional organization with expertise in web-oriented systems. I don't know which will happen in a future release.

  Published by: Hans Forbrich on September 22, 2009 09:42

  I'll duplicate some of this in my blog. Maybe it will help others make the transition.

• I get garbage when you click on "View Page Source" of maff backup files.

  Hello
  Saved files mhtml and html, the HTML etc code view when selecting "View Page Source".
  Since the installation of the add-on Firefox to save web pages in the form of maff files, when you click on "View Page Source" it displays garbage.
  Is it possible to view the original source of a maff file saved?

  A MAFF file is a ZIP archive, so you should have extract the files in an Archive Manager, if you do not use an extension to handle this type of file.

• View 6 with older software View customer?

  Hello

  I am running view 5.2 and I would switch to 6 reviews. However, for remote connections, we use Juniper SSL. If a computer has the latest version of the Client view, or the 2.x customer, they can not connect to their desktop computer. They receive the message

  View Client is not installed on your computer. You will now be redirected to a location configured by the administrator to download and install the client.

  It is documented on the page of Juniper. http://KB.Juniper.NET/InfoCenter/index?page=content & id = KB28754

  On the VMware compatibility page, it shows that view 6 is compatible only with customers 2.2, 2.3 and 3.1

  I know that these are "officially supported" clients, but will work the old 5.4 good customer with view 6?

  Mike

  It's funny, my problem is that every old version of the Client works with everything, which means there is no mechanism to direct users to newer versions or restrict which versions can be used to access our environment up-to-date.  So, don't worry about it!  Your users can continue to use any old version of the Client notice (for now) with any version of any OS (OS x or Windows) and will continue to work with any version of Horizon view. (5.0 +).  I do not say that there is no quirks to use older versions of the client here and there, but on a weekly basis, we discover a user with one of the old installed 5.x customers and access our 6.0.1 environment.

  Hoping that with 6.1 VMware will break something!

• Recommended backup software

  Hi all

  Nowdays our partners and clients ask us about UCS recommended backup software.

  Many of them are concerned about real results for the backup of the UCS solution.

  I can't find guides design or use of backup with UCS software cases.

  I think we never certified backup for UCS software because it will depend on the OS.

  I want to know your experiences for backup with UCS software.

  Please comment if you proposed or tested with something.

  Kind regards

  Keiichi Takagi

  I think that you can use pretty much what you want.  We use Netbackup to our operating systems.  Regarding the config of the UCS, we use the built-in functions of UCS Manager to save a copy and then ftp to a server.

  Adam

• Backup/restore con vcbMounter/vcbRestore

  Hello to all,

  MI affido alla vostra esperienza perched non ho ancora trovato una risposta.

  Domanda e:

  perched in vcbMounter if Può dare m SAN option (ho trovato varies ricerche Google...)  My sul mio ESX 3.5 mi dice che posso dare m 'cos ' | "" NBD "| "' nbdssl '?

  Ovviamente lo purpose e su fare backup UN UN LUN SAN cosi del passare not by the rete e metterci moooolto di piu

  ECCO output Help, but meanwhile grazie to qualcuno lo his e mi Può turns

  Ciao

  0Diego0

  PS: in the internet ho trovato qualcosa di purpose a proxy... mmm?

  vcbMounter - help

  Use:

  vcbMounter h & lt; URL & gt; u & lt; user name & gt; & lt; operation & gt;

  & lt; URL & gt; : = & lt; hostname & gt;

  & lt; operation & gt; : = & lt; mount_op & gt; & lt; auto_umount_op & gt;

  & lt; verbosity & gt; : =-L (0-6)

  & lt; fashion & gt; : = m 'cos ' | "" NBD "| "" nbdssl ".

  & lt; mount_op & gt; : = - a & lt; VM & gt; & lt; mount point & gt; [& lt; storage of data & gt;]

  & lt; auto_umount_op & gt; : = U & lt; mountpoint_dir & gt;

  & lt; VM & gt; : = & lt; moref & gt; & lt; UUID & gt; & lt; IPAddr & gt; & lt; & gt;

  (See VM Backup guide for a complete list of research)

  criteria.)

  & lt; mount point & gt; : = r - & lt; dir & gt;

  & lt; flavor & gt; : = t 'fullvm '.

  & lt; storage of data & gt; : =-C & lt; datastore_catalog_file & gt;

  & lt; SsId & gt; : = - n "ssid:" & lt; "." SDK-MoRef & gt;

  & lt; export-flags & gt; : = - M (0 | 1) F (0 | 1)

  If no password is specified on the command line, you will be asked a.

  Flags of export:

  -M: If, together, the disk is exported in a single file (monolithic).

  When it is off (default), the disc is divided into several files of 2 GB.

  -F: so together, the disk is exported in the form of disc "flat", with no optimization.

  When it is off (default), the exported files disk will be more compact than

  unused space in the disk image is not included in the exported file.

  Examples:

  +) Do a full VM style backup machine virtual "foo.bar.com" through the San,

  Talk to host ESX/VC "wisdom.bar.com" as user "vc" with

  password "foobar". -Export will go to "d:\backups":

  vcbMounter h wisdom.bar.com u vc Pei foobar - an ipaddr:foo.bar.com.

  r d:\backups\foo-fullVM t fullvm

  Full VM backup export a complete virtual machine in a set of

  files in a directory. This set of backup files allows the

  complete virtual machine to restore later.

  +) Do an auto dismantling of export has created:

  vcbMounter h wisdom.bar.com u vc Pei foobar.

  U - d:\backups\foo-fullVM

  (A complete virtual machine disassemble operation just to remove the exported files.)

  Stai guardando he vcbMount che è sull'ESX.

  My / quello che fare you want you here wants a VCB Proxy: UN fisico, is Windows Server alla stessa SAN (zoning e con masking corretti) e con he pacchetto VCB (e opzionalmente con he software di backup).

  Vedrai che in what case you Reed he transport di tipo "san."

  André

• How do I reinstall the old applications backed up using the backup recovery mgr software

  I fell off my machine after reloading some files of the .NET framework.  Because windows is more loaded, I used the HP recovery discs and made a backup complete both DVD and USB from my hard drive.  Then I went ahead and allow the recovery disk reformat and reload the factory system.  I went to use the recovery to re - install all applications and files, but it only copied all the stuff in a folder on my drive C:\.  IF ten to twelve apps (quicken, genealogy, adobe paintshop & pdf, MS SQL) are not loaded. It seems that my entire system sits in a file folder.  Great if I wanted to only data, but I really want to use applications without reloading everything from scratch.  I found no executable file to start such a reload. I was happy with my machine before the accident, and if I could do a simple recovery from before I installed these files, I would have done it instead of the reformat.  Alas, whatever the back backwards, I went, windows was pretty much DOA.

  I have a HP Pavilion with win7.

  Is it a lost cause?

  The HP Recovery software backup only a specific list of types of data files and the folder they reside in. No programs were backed up, and even if they were, they would not work properly. You will have to reinstall all the software that you previously installed.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• E GhettoVCB backup VSS

  Hello to all, by soluzioni one particular uso con ESXi costo ghettovcb, di solito faccio spegnere prima macchina virtuale e poi una volta salvata riavvio, tutto tramite script.

  Non mi è chiara una cosa, is con ESXi 4.1 I have VMware tools hanno he supporto VSS, it backs up a caldo con ghettoVCB e quindi consistent (is viene abilitata quiescenza dallo script) oppure no?

  Saluti!

  SE hai Veeam, tramite backup ti fa anche it format di VSS System State, da cui can you di to promote restoration of the United Nations rates tramite AD U - air :-)

  Con altri software (Symantec tipo by dirne uno) not if not avendone experience card, very non mi fiderei di ripristinare AD da UN backup di Ghetto o di Trilead. Oltretutto C'e da Attività di restoration if making authority, my this is another topic...

  Ciao,.

  Luca.

  --
  Luca Dell'Oca
  http://www.vuemuer.it
  [Assegnare punti a useful risposta e una a modo di say thank you]

• Store files and backup at the same time

  Hello!

  We have a very good software measurement work written in LabView. However, we want to save the data files on a regular basis. We want to be able to do this, even during the measurement, and then the software is written in the files. Now, when we try to do, we sometimes face 'error 5 has occurred to replace/create/open file' (in 'write in a spreadsheet file') because another software (backup, windows stuff, otherwise...) accesses the files too. Now my point of view this type of file matching should not be a problem since LV is the only writing software in the files. There are 3 possible solutions that I can think of:

  • delay writing (not possible because you don't know how long to delay, for example how long other software remains open)
  • the data in queue and write on the next test (e.g. https://decibel.ni.com/content/docs/DOC-7212 - but once again; how long in the queue?)
  • the good thing is; copy the temporary file to change temporary, delete the original and move the temp in this place

  the last should be the right solution and also work on different OS since the copy/move stuff should be atomic operations and therefore safe in this context. However, I have implemented the solution and always have exactly the same problem but now in 'move the file '... I begin to doubt if it is possible to solve this problem at all and so desparatly need help here! I can see it is not lock, or mutex on file and no need to LV generate an error (I think it's done as a warning to future potential conflicts)... I guess that's a few hidden/strange evil documented Windows API 'characteristic' LV uses to detect the other access and it results in a behavior I can't change or fix - up to what to do here...?

  Thank you very much in advance for helpful suggestions or advice! Greetings

  Ursin Soler

  I must correct myself here:

  • TDMS has not help at all - has exactly the same issues
  • only working solution at the moment is (protected) open the file start and keep this refnum open all the time until the program ends: reading and writing in the program can be done as before and ignore this protection refnum (open and close an another if necessary additional refnum) completely OR be implemented smarter and use the same refnum.

  Hope this helps someone else too.

  Using this method, I can now use for example MS robocopy to back up or all the data files in mirror while the LV program written in it. Something very fundamental and important for a recorder...

  Greetings

• Rescue & backups delete recovery HELP!

  Hi, I have an SL500 and the hard drive was 250 GB, but there are 211 gb available. in any case, I noticed that I was somehow only left out of 211 gb 80 GB. I asked that he was a technician at IBM and at - he said it was my backup of files. now, the drive from my computer q crashed in March of me to try to do something with the back ups and I need a whole new HDD, but my music has been registered via a flash drive.  the tech guy said that I should remove my old back ups. very well, very well. IM do that tonight and it is literally taken hours and right when I click on 'remove' it is not an answer.  I had my computer folder (? I think it's what you call) open so I could see how much space I had, and it DECREASES in fact then I was "suppression" of backups, and yet it was inadmissible. She went from 80 GB to 60 GB. Please help me solve this problem, im shaking for fear of losing my files because I don't want to do it like the last time. I don't know what could be taken from so much space.

  I plan to buy an external hard drive in the next week but please help me, I'm 17 and I'm relics fear of losing my files again and my 19 GB of music.

  Help, please

  Rescue and recovery in your folder of ThinkVantage software creates backups (a full backup and the others are incremental) and stores them on another part of the HARD drive that you will not be able to see just by going to the properties of the C: drive.

  Check the record of ThinkVantage Rescue and Recovery

  Start-> all programs-> ThinkVantage (or Lenovo Care)-> Rescue and Recovery

  Once you are there, you will see a bar upstairs with 4 or 5 options. Here, you have the ability to view the size of your backups. You also have the option to delete them. Search for the word "Advanced" in the menu bar, then select 'delete backups"to remove them and free up space on your hard drive. Don't forget that you can also "schedule" of your backups and you can choose to change the location you want to that backups going. For example, you can have the backups Save on a CD or on a drive of 'network '.

  If you have Vista as an operating system, you can go to this document on our site of Lenovo to get a general understanding of our HARD drive partitions:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-70829

  Let me know if you need additional assistance.

  Thank you

  Mark

• WMF views miniature

  At the opening of the private pictures (clip art) wmf files containg my vista will not show the thumbnail even if the wmf says aid is compatible with vista.  They will not even open in windows photo gallery.  If it is something I have to do in vista to make them open?  I can see fine on XP computers so I have now the files are not currupt.  Any suggestion would be appreciated.  Thank you.

  At the opening of the private pictures (clip art) wmf files containg my vista will not show the thumbnail even if the wmf says aid is compatible with vista.  They will not even open in windows photo gallery.  If it is something I have to do in vista to make them open?  I can see fine on XP computers so I have now the files are not currupt.  Any suggestion would be appreciated.  Thank you.

  ========================================
  Maybe this article will enlighten us:

  Why can I not see thumbnails of WMF files
  in Vista, as could I in Windows XP?
  http://thewinforums.com/topic/25399-WMF-and-Vista-thumbnails/

  Free software IrfanView can be worth a try...

  After downloading and installing the software...
  Open IrfanView and go... File / thumbnails...

  On the screen of thumbnails... Go to your
  .wmf file and discovers the thumbs.

  IrfanView
  http://www.software.com/IrfanView-9337-1

  Download plug-ins too...

  IrFanView graphic viewer PlugIns
  http://www.software.com/IrfanView-plugins-9374-1 John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Window backup error 0 x 80070057

  Recently, I get the following error message when you try to access or backup using Windows backup.

  "The backup application could not start due to an internal error:

  The parameter is incorrect. (0 x 80070057). »

  I tried the 2 solutions I found on Microsoft support:

  1. check the decimal symbol setting, it was fixed ".»

  2. Add a registry key value.

  None of these fixed the issue.

  I tried to restore my system to a previous point when when my backups worked, but that has not solved the problem either.

  Y at - it a solution or a fix to this problem?

  In nine days, two different alleged "experts" who work for Microsoft have been unable to solve your problem.

  I do not work for Microsoft and suggest ditching the backup/restore of Microsoft in favor of a popular third-party program designed and written by a society that allows their business to backup/restore Windows:

  If you want a truly refreshing experience of backup image at least consider the free version of Macrium Reflect:

  http://www.Macrium.com/reflectfree.aspx

  Think about what you do one day if you need to use your system image to retrieve, then compare what Microsoft has to offer with Macrium has to offer.

  Imagine the process using the tools from Microsoft or a company that specializes in backup/restore software.

  Imagine the support you would get from a company that specializes in the backup/restore software.

  Of course, you get more features in the paid version, but even the free version is superior to everything that Microsoft has to offer (backup/restore is not their business).

  Install and test the free version.  If you don't like it, uninstall it.

  Vroom!