Viewfinder options

Similar Questions

• Trash in the viewfinder

  When I look through the viewfinder, I see a few small pieces of trash. The mirrors are clean, and cameras was aired. Need help for how clean, or do I need to drop it somewhere.
  Thank you from Texas

  It's dust, probably based on the 'top' of the focusing screen.  The screen is a frosted surface (usually the upper part is frosted and the bottom is brilliant).  The camera is projecting an image focused on this screen, because the distance between the lens and the image inside the camera sensor is exactly the same distance as the distance between the lens and the mirror to the frosted glass.

  When you look through the viewfinder, you're actually seeing a projected image on the screen to update (a bit like a rear projection TV screen).  This sort of would be like having dirt on the "inside" of the Panel of a rear projection TV - it is not on the surface, you can touch and we should remove the frosted glass to blow off the dust on the back of it.

  When you take a picture, the mirror reflex swings clear and the light path goes directly to the rear of the lens of the imaging sensor without ever going through the focusing - screen where it will not affect your images at all (you may have rocks upward in the room and it wouldn't affect the images).

  My 5 d II camera a user replaceable lenses of sight (Canon sells optional screens) and they include a special pair of tweezers with a curved tip to make it easy to open the update screen compartment and swap screens without having to 'touch' the screen with your fingers.  But your camera is not designed to have replaced sight glasses to (although others do them.)

  Although it is possible to remove the screen and clean it, do it very carefully because it is easy to damage this screen (especially if you never did before and do not know how to remove and reinsert the screen).  As the dust will not appear in an image, I would leave it alone.  If you choose to try clean in any case, it's your camera and your choice to accept the risk.  But it could lead to a more costly repair if something goes wrong.

• a7ii modes of viewfinder (studio shooting)

  Hello!

  How to set the mode viewfinder sony? I shoot in studio with strobes, so ISO 100, f 16, which makes the completely dark viewfinder. And I need to see what exactly I'm shooting and where I focus. How viewfinder show not the simulation of exposure, but what I see?

  Thank you!

  I had a look at my camera now

  Again, go in the menu
  Go to the tab with the toothed wheel

  Look for the option
  Live view and change it to OFF

  It should not emulate the end result and work as an optical viewfinder

  Good luck

• What are the appropriate steps to rotate the viewfinder of the camera?

  Another screen problem is driving me crazy.

  I'm quite confused as to what are appropriate measures to turn the viewfinder window when the user rotates the device.

  I seem to be able to get things market during the passage of a landscape to a landscape upside.  But to me something else gives basically the things that I can't begin to describe.  For example, when I go from landscape to portrait, I always get the bottom half of the screen to be the dark tone and the view backwards.

  Say vf_win is the window of the viewfinder and the size is the size of the vf_win and the angle is the angle of rotation new peripheral.

  So I first turn to the viewfinder window by

  screen_set_window_property_iv(vf_win, SCREEN_PROPERTY_SOURCE_SIZE, size);
  screen_set_window_property_iv(vf_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  rc = screen_set_window_property_iv(vf_win, SCREEN_PROPERTY_ROTATION, &angle);
  

  then rotate the camera by means of

  rc = camera_set_device_orientation(handle, angle);
  rc = camera_set_videovf_property( handle, CAMERA_IMGPROP_ROTATION, &angle);
  

  ?

  I think the above is certainly false since I couldn't get the results I wanted.

  Any help is greatly appreciated.

  The sample application does not work quite right when launched in portrait on the playbook, because the default configuration of the camera is for landscape.  Down in the device drivers, we don't really know anything about how the device is held and what is intention of the user/application, so we rely on the app by telling us a lot of information to make things.  Don't forget, this is the API of the lowest level available for access to the camera.  There is an API of Cascades photo being developed which encapsulates C API to the top and tries to simlify things at the expense of flexibility.

  On PB, the video viewfinder frames 1920 x 1080 by default, but several other formats are supported (this whole landscape well!).  Use camera_get_video_vf_resolutions() to retrieve the complete list.  If you need to make in a picture window, you must specify either a rotation of output using camera_set_videovf_property (handle, CAMERA_IMGPROP_ROTATION, 90 or 270) or by adjusting your rotation of window screen using screen_set_window_property_iv (win, SCREEN_PROPERTY_ROTATION, 90 or 270) and optionally resize the window by using SCREEN_PROPERTY_SIZE.

  The first option above actually produces a video image 1080 x 1920 returned in a window of the non-tourne screen.  The second option is still dealing with buffers of window of 1920 x 1080, but when the window is composite, it is blitted to the side.  We have 2 ways of doing this is because we have a requirement to be able to save videos in formats portrait without having to rely on the advice of metadata to display the videos properly as Apple or Android have to do (this is the reason for the 1st method).  For the second method (form) this is because not all applications require the video must rotate, nor necessarily all hardware platforms support video output in this mode.

  To answer your last question - definition of resolution 1024 x 576 vf and a rotation of 90 on playbook will give the following result:

  -buffers that have a width of 576 and a height of 1024 pixels of video output.

  -You can then display the viewfinder in a window size 576 x 1024 (or however you choose to scale)

  -buffers sent by the sensor of the camera would be rotated 90 degrees to the right before being delivered through these pads size 576 x 1024

  Represent it visually?

  If you keep the playbook in house orientation and a person stood in front of the camera, the image would rotate 90 degrees to the right so that their head is located to the right of the frame and feet to the left.

  How is it useful?

  If you happened to take the playbook oriented 90 degrees counterclockwise (eg. logo blackberry is on the right side) and displays this buffer image 576 x 1024, head of the person would now be at the top of the screen.

  Once again, this can easily get somewhat confusing and really benefits greatly from visuals.  I keep a stack of post-it notes at hand and am constantly draw lines of frame and stick men on them and turning them accordingly

  See you soon,.

  Sean

• Option - viewing feature request

  I have the LCD screen is turned off with viewfinder only set, to save the battery.  After the shooting, I lower the camera and view the image for the time programmed (2 sec) on the LCD screen, like all other digital SLR cameras.  It is a natural and way easier to view the image.

  In playback mode, if the user always displays in the viewfinder, and then you display in the viewfinder, but if not looking through the viewfinder, then display on LCD.  Added image review option.

  The firmware could be modified to support this feature?  Thank you.

  Oooops... I noticed for the first time, the LCD screen when the automatic value goes to sleep after the time set in the settings.  I had not before, so I have concluded, that he remained all the time.  I don't see a problem with the design )

• Phone number not an option for iMessage on iPad mini

  Hello

  So my ID Apple was recently hacked and had to change my password on all my devices (iPhone 6 and mini iPad). But now that I changed, my iMessage works well for my iPhone, but on my iPad, I have no option to choose my phone number. I tried to reset iMessage, reset my iPad, everything. Now I'm curious to know why, that's happened what else I can do for an option again.

  Thanks in advance for helping me!

  To go through all these steps?

  Use continuity to connect to your Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support

  Use this feature with any Mac, iPhone, iPad, or iPod touch that satisfies the requirements of continuity system. Make sure that your devices are configured as follows:

  • Each device is connected to iCloud with the same Apple ID.
  • On iPhone, go to settings > Messages > Send and receive. Make sure the Apple ID at the top of the screen is the same Apple ID you use for iMessage on other devices. Add a check to your address, phone number, so that you can be reached by both iMessage. Do the same on your iPad or iPod touch.
  • On iPhone, go to settings > Messages > transfer, text messages, then choose which devices to send and receive text messages from the iPhone. A verification code and then on each device. Enter this code on your iPhone.
  • On Mac, open Messages, and then choose message > Preferences. Click accounts, and then select your account from iMessage. Make sure the Apple ID shown here is the same Apple ID you use on other devices. Add a control to your phone number and email address.

  Use the SMS and MMS messaging

  

  To use this feature, simply start conversations as usual in the Messages application on any of your devices. Alternatively, you can start a conversation by clicking a phone number in Safari, Contacts, calendar, or other applications detecting phone numbers. All your incoming and outgoing messages on all your devices.

• My i pod classic has no summer when option in I tunes 12.5

  My I pod classic has no summer when option in i tunes 12.5.  I want to manage my iPod

  Launch iTunes and connect the iPod.  The iPod is displayed as a button on the device, close to upper left corner of the iTunes window.  This screenshot of my iTunes appears iPod device button, circled in red

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side of this screen, in the sidebar, in setting, click the iTunes (like the music) media type to set up automatic synchronization for this type of media to iTunes.

  So if you are more familiar with the "tabs" to set up the iPod, who went in the upper part of the window of iTunes Plus, it works the same way, except that the features are now in the sidebar on the left side.

• Where are the options of the trackpad in Sierra OS?  In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  System Preferences > Trackpad!

• I don't see the option for Personal Hotspot

  Dear Sir / Madam,.

  Please let me know why I can not see personal hotspot in my setting?

  If it is not possible to have this option, how can I share my network with someone?

  Thanks in advance

  Best regards

  Emilie

  Hi Sameneh...

  Follow the instructions in this article to support > share your Internet connection with Personal Hotspot - Apple Support

• I lost the option to save pictures that are emailed to my Ipad mini

  When I open the contents of my hotmail on my IPad mini, I have now the possibility to record the content of the photo

  Hello. If you press and hold on the photo, you should get a popup with the save option. This makes work more like Safari.

• New Sections in Pages - 'Starting on this page' not an option?

  Hello

  I am creating several sections on one page in the Pages so that I can create sections with different numbers of columns.

  I'm running on a problem that create a section break automatically starts a section on a new page. When I try to select "Start this page" on the "create a new Section" menu drop-down format of the Document, the option is grayed out.

  What should I do to "starting with this page", an option?

  It's easier to do in Pages ' 09, which took a Break from layout and a column break. V6 and v5 pages eliminated paused, so you have to improvise.

  There are two different approaches to a layout page in single column, two columns and return to single column. The two approaches are easier if you are available with showing invisible mode (click on the images to enlarge):

  1. Preferences pages: leadership: Alignment Guides: both are checked.
     1. Alignment of the areas corresponding text appear automatically
     2. Text boxes for positioning as appropriate. Several column in a text box mode do not display the column or gutter contours. It is the simplest to implement and tweak.
        
  2. Two sections
     1. Regular and one single column followed:
     2. Insert menu: column break
        1. Format text panel: tab page layout: 2 column
        2. Insert text in multiple columns and add additional yield at the end of the last sentence.
     3. Insert menu: column break
        1. Format text panel: tab layout: 1 column
        2. Resume entering the content of normal paragraph
           

• Click on free will is not open when I click on options

  How can I open click free options. It closes when I click on the tab options. I am trying to reset

  You not give us a lot of information to work with...

  Check if there is an available update?

• Lack of options in iClaud / iOS 10.0.2

  Hello

  after upgrade on iOS 10.0.2 in options iClaud / iClaud Drive, missing option see iClaud folder on the desktop.

  Anyone has the same problem... or, if that option is hidden.

  Than you!

  They removed this option with iOS 10.  He is now on the home screen now.

  If you can't find it on your home screen or other screens on the device, go to the App store and download.

• What are good Options for installing Linux on a Mac?

  I have a Macbook Air in 2013 with a SSD 256 GB and 8 GB of memory. I have 80 GB free. I have Hyperacusis and had problems with a noisy computer a few years back, so wanted to avoid noisy readers.

  I need to be able to access my files from either OS X / Mac OS or Linux. This is the biggest problem. If I can't work on the same files in OS X / Mac OS and Linux, I can't really do much with Linux.

  I have trouble with some accessibility problems in OS x:

  1. I have sensory problems and need to disable more animation and more still of the blinking cursor. I used a hack to disable flashing cursors in some applications, but it does not work in LibreOffice, Pages, Mail, etc. It should work in Scrivener, and I plan to spend to Scrivener. He also works in bean and Textedit.

  2. I have problems of coordination/proprioception and could use the wider scroll bars. I currently use Scroll + scroll software, but it doesn't go anywhere. I could use a version of sticky keys, but the current version is not yet there. It shows the active keys on the screen, but I need to update t on the keyboard.

  I will need to avoid some problems of accessibility on Linux:

  1. I have sensory problems and you will need to disable the animation and flashing cursors. I need to be able to boot Linux with minimum brightness. I tried Kde always open in blinding brightness.

  2. I have problems of coordination/proprioception and need to disable the touchpad gestures and listen; This required a patch kernel in Ubuntu, which meant running a non - lts version, which meant not being not able to use the Ubuntu repositories after support missed. I need to be able to keep the visible scroll bars and expand their. Sometimes, I need to use a software of scrolling.

  One option is to use refined and a full install. It's intimidating. I'm done with installation of Xubuntu broke at some point because it crashed while it was installing. Another option is to use VMWare Fusion or Parallels or an equivalent Mac of Wubi.

  One of these options would allow me to access my files from Linux? Those who would work with my lack of experience and power limited processor programming limited disk space?

  Thank you.

  Yes, I would say that all VMs are options to save money, I would try to go with oracle virtualbox, it is free I use osx to run a Windows 10 and machines virtual ubuntu it allows me to access the files across, although you mind a program under osx, maybe not 100% safe to use the same format as the same program under linux so that could cause a problem if this is the case.

• Clear all settings and data Option

  Hello people of Apple,.

  I recently bought an iPad mini 4 and now want to sell my mini iPad 2 on eBay. I used the option on my phone to reset the phone to the factory settings and then checked on iCloud and Apple to make sure that the device no longer appears. Now, the mini iPad 2 says hello on a white screen and calls for wifi before and I want to ensure only once that I sell and someone he connects to the internet that is not all of a sudden turn off on my iCloud and counts Apple. How can I make sure that this iPad is completely erased, and the next person can set up with their identifier Apple and nothing to do with my accounts?

  Follow this:

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support