Similar Questions

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you

• MESSAGE - LOOK AT AN ENVIRONMENT MAY NOT PROPERLY CONFIGURED TO USE ADOBE READER.  HAVE ACROBAT READER AND USED, MESSAGE RIGHT ON THIS ONE SITE. HOW DO I FIX

  HOW CAN I FIX IT?

  Hi tomp3648858,

  Please refer to this topic If look at an environment is not properly configured to use adobe what should I do?, I would like to know if it's the same scenario.

  Kind regards

  Nicos

• Yahoo: 'Sorry, comments has not been loaded properly. things may not work. "Circle of rotation... IE works fine.

  YAHOO comment section: "sorry, comments has not been loaded properly. things may not work. "I get a radial circle of spinning - not to load the comments. Firefox 8 worked well. Help?

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error - there might not be a sound device installed on your computer, it can be used by another program, or it may not work properly.

  Original title: How do I install the audio device for windos xp driver.

  Tengo una don't destop pero no works el sonido y me lo siguiente al try using el windos Media Player appears: it might not be a sound device installed on your computer, it can be used by another program, or it may not work properly.   AS PUEDO HACER PARA CORREGIR EL ERROR!

  Hello hernan.

  ·         Do you get the Windows default sound on your computer?

  ·         You did it of any hardware or software changes on the machine before the show?

  You can follow this link and check if the problem persists.

  No sound in Windows

  Hope the helps of information.

  Please post back and we do know.

• How can I get Nitro PC installed properly, so it does not say that he may not support a file or a codec required that it blocks and other problems.

  How can I get Nitro PC installed properly, so it does not say that he may not support a file or the required codec, which it does in Windows Media Player, everything seems to go through there and Nitro prevents me from opening photos or electronic-mail/transfer their. Also, what are the appropriate programs to run files in the documents library and photos. recently, I lost all my documents, the files are there but now empty. It happened a little while before had spoken, by buying the GoFlex Seagate plug of iYogi I was stupid enough to buy their storys. Now that I told them that I used to pay $ 400 to renew my contract, which has more than a year and a half left in this regard that they were still treat me worse than ever. I even bought a program that is supposed to protect your bank account, but only have a debit card which they protect not only credit cards, it was not even mentioned in the contract or the sales pitch. The Seagate GoFlex is sitting here unplugged after that they could not challenge or whatever it is to recover after at least 4 attempts. Brief this cowboy got scalped, but if I can get the Nitro to block all my stuff I would be off to a good start to correct things. Also, I had a printer that was supposed to be a fax with all sorts of other gadgets they had me plug with a wire and wireless and never had to use the fax once and continue receiving invalid messages when I try to put in place something like snapfish, which seems to be an automatic link to my set of requirements. I'm lost.

  Maybe their support/forums?

  http://support.nitropdf.com/home

• Why the error message is created, and the statement may not run properly?

  Why the error message is created, and the statement may not run properly?
  

  SQL> select sql_handle, plan_name, creator from dba_sql_plan_baselines where 
  sql_text='select*from hr.jobs where min_salary>10000';
  select sql_handle,plan_name,creator from dba_sql_plan_baselines 
  where sql_text='select*from hr.jobs where min_salary>10000'
                                                                        *
  ERROR at line 1:
  ORA-00932: inconsistent datatypes: expected - got CLOB

  It is true that it is the problem of syntax. Change the increased as follows, the increased can run successfully:

  SQL> select sql_handle,plan_name,creator from dba_sql_plan_baselines where sql_text
  like 'select*from hr.jobs where min_salary>10000';
  

  Edited by: jetq may 3, 2010 19:26

• Computer will not properly install update KB976098 + new software

  I was a lot by browsing this site and saw that many people is facing the same problem. What I did find was a person with software problems.

  My computer was purchased 26/11 this year with Windows 7 pro + Microsoft office home and student . One day Windows were 27 updates to install and therefore has been left overnight. In the morning update no. 27 was still install and never finished. Had to restart the computer to exit the update screen. days later there were 4 updates to install. Still once, the last update was never completed.

  Now, there's only 1 update important remaining, KB976098 , the fix for the time zones that I presume.

  Not only the update will not install, now the new software may not be installed properly:

  I tried some actions (such as downloading stuff, install software, games) while windows tried to install the
  Update:

  • During the installation (for example.) Adobe Reader, Comodo FireWall took more than a minute to display its notice of default on an attempt to install software on the computer and therefore compromised the initial installation.
  • Turn off Comodo Firewall does not solve the problem. Delay of the computer respond when an action of the instalation was performed is the same.
  • The installation of update process could not be stopped once he was "installation."
  • The icon of 'disable' had no notification "update", but once to close the office and displays the message "loging off", the computer is never extinguished.
  • While playing an online game, nothing unusual has happened, no delay on start-up or exit.
  • When you save things like a packadge power point (for conferences of 2007 to display on older versions) the application would freeze and the package has never been created
  • Presentations PowerPoint would have graphics errors, such as the black and white rectangles containing all movable objects.

  After Force-reboot of the computer, cancel the auto-update feature and remove it from the list self-install, I retested evevrything:

  • Adobe Reader has been installed successfully, even with Comodo Firewall active
  • Comodo Firewall has reacted instantly to any attempt installation
  • More online games the same
  • PowerPoint correctly displays images and created packages without error
  • Turn the computer off was possible without forcing the stoppage.

  Now, I'm checking the updates installed and found out there are only installed 23 (in the Control Panel installed updates ). The history of the update displays more than 74 update. As mentioned previously, the first batch of update contained 27 updates, No 23 or 24. I checked some of these updates to the story:

  • There are a few updates, eg. update of security for microsoft office system who have 10 diferent KBs (being the first of its kind, his last KB974234 KB936514). Five of them have been installed twice: KB936514; KB951944; KB954326; KB956828; KB960003

  I guess in these 74 updates, replacents occurred in 23 updates, and some are not microsoft partners to be included in the Panel of installed updates . I really don't know, that's why I am asking :D

  I tried the more possible ways to install the update, downloading it mannualy, disabling the firewall, close all other applications, etc. etc...

  I would like to know the following:

  1. Why is not install update KB976098?
  2. Why other users have the same problem with recent updates?
  3. How to prevent the installation of update if the stop command does not work?
  4. How can I turn off the computer without having to install the downloaded update?
  5. Are double downloaded updates a problem?

  I wrote this for so long now. If I forgot anything, the question might be already in the text.

  Thank you for your time and patience! :)

  Read the "Updates since the previous cumulative Windows time zone update" section of http://support.microsoft.com/kb/976098. If you do not reside in one of these 14 zones, really useless this not (IMHO) security-related update, so you can just "hide":

  1. stop the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > Right click on run , and then select run as administrator >
  (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update: Select the installed updates: right click on the Update for Windows 7 (KB976098) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

  4. start the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click Start
  (Stopping the service will take a moment)

  =====================================
  To restore/show updates in Win7: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.
  =====================================

  Comment: For some reason, a lot of Win7 users have had problems trying to install KB976098. for example, http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/b620bb51-11e9-48f4-9a45-4034498cb8e1

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• RAID 0 for a RAID configuration not "this computer's hardware may not supported booting from this drive.

  I want to install a new HARD drive in a tower of the mine to a friend. It was initially created as a RAID 0 configuration with two 160 GB HDD. The replacement is a single 1 TB of HARD drive. I get the message "this computer's hardware may not supported booting to this disk.» Am I missing an approach from a RAID 0 for a RAID configuration, no?

  Hi RegularPencils,

  I suggest that you check in the basic input/output system (BIOS), if you find an option to disable the RAID. If you find, disable the RAID and try to install Windows vista, check if it helps.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Error message when you try to install Windows Vista on a computer that contains multiple RAW hard disks: "Windows cannot find a system volume that meets its criteria for installation.

  http://support.Microsoft.com/kb/933925

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• OAF, used with the clausule setWhereClause display object, show the error not correctly initialized.

  Hi all,

  I'm new with ofa and AM mi to VO that I use to find the information that is displayed to the user on a region of the query, after the user has pressed the button go demand CO AM tho load VO both use this information to display in a popup region to display and update. the main problem is the closing of popup region it send a shipment to the server one appears the error "View object may not be correctly initialized during update."

  The main page and the pop-up window uses the same AM, the initM2mVo() and initTavleVo() are called by processRequest of the main PG CO, the popup dosen´t have a CO.

  This AM using PG main and in the region of popup

  package tasc.oracle.apps.tasc.m2m.imei.server;
  
  
  import oracle.apps.fnd.framework.OAViewObject;
  import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
  import oracle.apps.fnd.framework.server.OAViewObjectImpl;
  
  
  import oracle.jbo.Row;
  import oracle.jbo.ViewObject;
  
  
  
  
  // ---------------------------------------------------------------------
  // ---    File generated by Oracle ADF Business Components Design Time.
  // ---    Custom code may be added to this class.
  // ---    Warning: Do not modify method signatures of generated methods.
  // ---------------------------------------------------------------------
  public class ActualizarImeiAMImpl extends OAApplicationModuleImpl {
      /**This is the default constructor (do not remove)
       */
      public ActualizarImeiAMImpl() {
  
  
      }
  
  
      /*******************************USE FOR CUSTOM CODE****************************/
  
  
      /******************************************************************************/
  
  
      /**
       * Inicializa el vo a través del cual se ejecutara la actualización del IMEI.
       * @param taskNumber
       */
      public void loadImeiVo(String taskNumber) {
          OAViewObject voTableQry = getTableQryVO1();
  
  
          if (voTableQry != null) {
              voTableQry.reset();
              voTableQry.setWhereClause(null);
              voTableQry.setWhereClauseParams(null);
              voTableQry.setWhereClause("TASK_NUMBER = :1");
              voTableQry.setWhereClauseParam(0, taskNumber);
              voTableQry.executeQuery();
              if (voTableQry.hasNext()) {
                  voTableQry.next();
                  String idActuacion =
                      (String)voTableQry.getCurrentRow().getAttribute("IdActuacion");
                  String dsM2m =
                      (String)voTableQry.getCurrentRow().getAttribute("DsM2m");
                  String imei =
                      (String)voTableQry.getCurrentRow().getAttribute("Imei");
  
  
                  if (idActuacion != null) {
                      OAViewObjectImpl m2mVo = (OAViewObjectImpl)this.getTascTransEqInstM2mVO1();
                      m2mVo.reset();
                      if (!m2mVo.isPreparedForExecution()) {
                          m2mVo.setMaxFetchSize(0);
                          m2mVo.executeQuery();
                      }                  
                      m2mVo.setWhereClause(null);
                      m2mVo.setWhereClauseParams(null);
                      m2mVo.setWhereClause("ID_ACTUACION = :1 AND DS_M2M = :2 AND IMEI = :3 ");
                      m2mVo.setWhereClauseParam(0, idActuacion);
                      m2mVo.setWhereClauseParam(1, dsM2m);
                      m2mVo.setWhereClauseParam(2, imei);
                      m2mVo.executeQuery();
                      if(m2mVo.hasNext()){
                          m2mVo.next();
                      }
                   }
              }
          }
      }
  
  
  
  
      /**
       * Carga los valores disponibles de IMEI según el taskNumber al cual pertenezca
       * el  IMEI seleccionado.
       */
      public void loadImeiValuesList(String taskNumber) {
          ViewObject viewobject = this.getImeiListVO1();
          OAViewObject voTableQry = getTableQryVO1();
  
  
          if (voTableQry != null && voTableQry.getCurrentRow() != null) {
  
  
              String imeiType =
                  (String)voTableQry.getCurrentRow().getAttribute("Attribute17");
  
  
              if (viewobject != null & imeiType != null) {
                  viewobject.setWhereClause(null);
                  viewobject.setWhereClauseParams(null);
                  viewobject.setWhereClause("TASK_NUMBER = :1 AND ATTRIBUTE17 = :2");
                  viewobject.setWhereClauseParam(0, taskNumber);
                  viewobject.setWhereClauseParam(1, imeiType);
                  viewobject.executeQuery();
             }
          }
  
  
      }
      /*******************************USE FOR CUSTOM CODE****************************/
      /******************************************************************************/
  
  
      /**Container's getter for TableVO1
       */
      public OAViewObjectImpl getTableVO1() {
          return (OAViewObjectImpl)findViewObject("TableVO1");
      }
  
  
      /**Sample main for debugging Business Components code using the tester.
       */
      public static void main(String[] args) { /* package name */
          /* Configuration Name */launchTester("tasc.oracle.apps.tasc.m2m.imei.server",
                                               "ActualizarImeiAMLocal");
      }
  
  
      /**Container's getter for TascTransEqInstM2mVO1
       */
      public OAViewObjectImpl getTascTransEqInstM2mVO1() {
          return (OAViewObjectImpl)findViewObject("TascTransEqInstM2mVO1");
      }
  
  
      /**Container's getter for ImeiListVO1
       */
      public OAViewObjectImpl getImeiListVO1() {
          return (OAViewObjectImpl)findViewObject("ImeiListVO1");
      }
  
  
      /**Container's getter for TableQryVO1
       */
      public OAViewObjectImpl getTableQryVO1() {
          return (OAViewObjectImpl)findViewObject("TableQryVO1");
      }
  
  
  }
  
  
  

  It's the CO of the main PG

  /*===========================================================================+
  |   Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA    |
  |                         All rights reserved.                              |
  +===========================================================================+
  |  HISTORY                                                                  |
  +===========================================================================*/
  package tasc.oracle.apps.tasc.m2m.imei.webui;
  
  
  import java.io.Serializable;
  
  
  import oracle.apps.fnd.common.VersionInfo;
  import oracle.apps.fnd.framework.OAApplicationModule;
  import oracle.apps.fnd.framework.webui.OAControllerImpl;
  import oracle.apps.fnd.framework.webui.OAPageContext;
  import oracle.apps.fnd.framework.webui.TransactionUnitHelper;
  import oracle.apps.fnd.framework.webui.beans.OAWebBean;
  import oracle.apps.fnd.framework.webui.beans.layout.OAQueryBean;
  
  
  
  
  /**
  * Controller for ...
  */
  public class ActualizarImeiCO extends OAControllerImpl {
      public static final String RCS_ID = "$Header$";
      public static final boolean RCS_ID_RECORDED =
          VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
  
  
      /**
       * Layout and page setup logic for a region.
       * @param pageContext the current OA page context
       * @param webBean the web bean corresponding to the region
       */
      public void processRequest(OAPageContext pageContext, OAWebBean webBean) {
          super.processRequest(pageContext, webBean);
  
  
          //get the handle to AM Attached to our Simple Page Region MainRegionRN
          //The page is passed as parameter to this method, hence we can get handle
          //to the AM quite easily
          OAApplicationModule am = pageContext.getApplicationModule(webBean);
  
  
          //verifica si la transaccion de creacion esta activa todavia
          if (TransactionUnitHelper.isTransactionUnitInProgress(pageContext,"ActualizarImeiM2m", false))
          {
              // deshace cambios y finaliza Txn
              am.invokeMethod("rollback");
              TransactionUnitHelper.endTransactionUnit(pageContext, "ActualizarImeiM2m");
          }
  
      }
  
  
      /**
       * Procedure to handle form submissions for form elements in
       * a region.
       * @param pageContext the current OA page context
       * @param webBean the web bean corresponding to the region
       */
      public void processFormRequest(OAPageContext pageContext,
                                     OAWebBean webBean) {
  
  
          super.processFormRequest(pageContext, webBean);
  
  
          //get the handle to AM Attached to our Simple Page Region MainRegionRN
          //The page is passed as parameter to this method, hence we can get handle
          //to the AM quite easily
          OAApplicationModule am = pageContext.getApplicationModule(webBean);
  
  
          //Detección del botón go de la región de query.
          this.queryButonGO(pageContext, webBean, am);
  
  
          this.updateImei(pageContext, am);
  
  
      }
  
  
      /**
       * Detección del botón go de la región de query
       * @param pageContext
       * @param webBean
       * @param am
       */
      public void queryButonGO(OAPageContext pageContext, OAWebBean webBean,
                               OAApplicationModule am) {
          OAQueryBean queryBean =
              (OAQueryBean)webBean.findIndexedChildRecursive("QueryRN");
          String idGo = queryBean.getGoButtonName();
          if (pageContext.getParameter(idGo) != null) {
  
  
              String tareaId = pageContext.getParameter("TaskNumberLovInput");
  
  
              //Inicializa el vo a través del cual se ejecutara la actualización del IMEI.
              Serializable[] parameters2 = { tareaId };
              Class[] paramTypes2 = { String.class };
              am.invokeMethod("loadImeiVo", parameters2, paramTypes2);
  
  
              //Carga los valores disponibles de IMEI según el taskNumber al cual pertenezca  el  IMEI seleccionado.
              Serializable[] parameters = { tareaId };
              Class[] paramTypes = { String.class };
              am.invokeMethod("loadImeiValuesList", parameters, paramTypes);
          }
      }
    
      public void updateImei(OAPageContext pageContext, OAApplicationModule am){
          if (pageContext.getParameter("ActualizarImei") != null){
            
              String imei = pageContext.getParameter("ImeiPopup");
              //TODO......
          }
      }
  
  
  }
  
  
  

  Thank you all.

  I thing I got the problem.

  I have the following configuration:

  • A Home Page and external RN which is call as popup in the homepage
  • 2 VO, java code queries, one to capture information that is used to query the VO 2 that I use to update the information in the pop-up window.
  • 01:00, this is the card only in the main Page. (Initially, I had mapped to AM even external RN as the main PG, but I take it off).

  The solution was to remove the mapping of the AOS of the outer region and in the messageimput of the whole of the outer region of the instance of the view and the view attribute manually in this field (http://screencast.com/t/uDTALEedCh do not use the Wizard) that one instantiation am AM, so the problem, it seems that was that defining an AM in the outer region create a new instance , causing that he cannot see the information I manually load in the t by request it them.

  in this case there is no need to use the following code, because the lines are responsibility of the query information in the java code, it must only be made when inserting a new line.

      public void initM2mVo(){
          //get a handle to the View Object that we wish to initialize
          OAViewObject vo = (OAViewObject)this.getTascTransEqInstM2mVO1();
          if (!vo.isPreparedForExecution()) {
              vo.setMaxFetchSize(0);
              vo.executeQuery();
          }
          //Create a blank Row
          Row row = vo.createRow();
          //Attach that blank row to the VO. Data will be fed into this row, when the user types into the fields
          vo.insertRow(row);
          //Set the status of the blank row to initialized. This tells OA Framework that record is blank and must not be included in DML
          //Operations until    changes are made to its underlying VO [via screen fields]
          row.setNewRowState(Row.STATUS_INITIALIZED);
      }
  

• IPhone 6 does not properly?

  Lately my Iphone (6) was not properly.

  It it constantly restarts randomly, it is not allow me on apps (they crash). If I get on its connect outside and very slow. The screen is most of the time of freezing and glitching. It's really slow, sometimes too the point that I have to wait about 10 seconds for the lock screen comes on. Also when I open the texts, it does not allow me too click anywhere, so the only way I can answer is too open the app about twenty times or drag the text down and answer.

  It has been like that since then, time I plugged my charger of friends, next to the issue of texting (I don't know if this has nothing do with it). I tried to manually reboot several times, and I don't know what else to do. I plan to do a complete reset.

  Is anyone know a cause or a possible way to fix this?

  Try these...

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone: https://support.apple.com/en-us/HT204184

  If your backup in iTunes, make sure that it is an encrypted backup.

  The next step would be to restore like New.

• Toshiba 47L7453DG - CEC does not properly using exernal amplifier

  I bought Toshiba 47L 7453 a few days ago.

  It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

  My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

  The wire connection is HDMI 1.4 certified.
  Maybe the problem is with the firmware of the TV.

  Maybe someone had the same problem.

  Any suggestion?

  Thank you

  Hello

  From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

  Manual, you will find some important notes:
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7453-424755-English.PDF

  _Page: 11_
  + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
  + If several devices are connected, the HDMI CEC control function may not work correctly. +

  _Page: 86 - 87_
  + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
  + On, also allocated to individual features will be activated. +
  + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
  + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

• Unable to play video file error: Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer

  Original title: Windows Media Player shows that the new codecs are required

  Original title: query codec and Media Player re

  Have used windows media player for many years on my dell. Usually to see the videos from Sony handycam. Just downloaded wmediaplayer and recent videos from Camcorder will not open one of the videos.

  The following message is displayed "Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer. »

  As I have not changed anything helpful suggestions please.

  concerning

  The winemaker

  Hello

  1. What is the format of the video file?

  2. what operating system is installed on the computer?

  Method 1: Run the troubleshooter in Windows Media Player on Windows 7 settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: You can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Method 3: In addition, you can also download & install the necessary codec to play the files.

  For more information, see: Codecs: frequently asked questions

  (For Windows Vista)

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Monitor display is not properly in Windows XP sp3

  Original title: Windows xp sp3 does not properly

  Hello, I do not know if this issue belong to the material division of the forum. I have an old system who have windows xp sp3. It was working fine until week couple but after a few days when I switched it on the screen is not displayed correctly.

  All the colors randomly displays as a spot on the screen and the other letters in a sentence is missing. I tried in safe mode with just visible in debug mode, but it doesn't happen in the journal to the screen. I can not even reinstall windows xp. Now I'm not able to understand if it's the problem of the operating system or a malfunction of certain components of the computer. Please help me.

  Thanks in advance.

  Hello

  Method 1:

  I suggest you to start the computer using the VGA Mode.

  (a) restart the computer

  (b) press F8

  (c) in the start menu

  (d) choose the option

  (e) activate the VGA Mode

  This option starts Windows in mode 640 x 480 using the current video driver (not Vga.sys). This mode is useful if the display is configured to a setting that the monitor cannot display.

  Reference:

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  If you are able to start the computer using the VGA Mode, you can perform a system restore to the date where the computer worked well.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  If you use system restore when the computer is in safe mode, you can't undo the restore operation. However, you can run System Restore again and choose a different restore point if any. You can also create Safe Mode system restore points. System Restore affects the Windows system files, programs and registry settings that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

  If the problem persists, you may need to contact the manufacturer of the monitor to the stand.