views and custom reports

Similar Questions

• opinion and custom reports

  Hi all

  I work hard on creating custom views / reports for clients.

  I wish I could customize them like:

  * When you build a custom report, is it possible to remove the first default pages (display / policy settings)?

  * It is possible to mix in a view, a table and a chart?

  Thks,

  Vinny

  * When you build a custom report, is it possible to remove the first default pages (display / policy settings)?

  [AlexD] NO.

  * It is possible to mix in a view, a table & a chart?

  [AlexD] No, you need two separate views for this.

• VM Templates and custom reports

  Hello

  I finally had the time to install VCO and LCM and I am about to see what he can do for us.

  What makes MCL attractive for us is decommissioning automated virtual machines.

  The other thing, we are very interested is in charge and reports.

  However, after a brief play with LCM seems a bit limited in load and functionality of reports.

  First in charge, the only place where I can put the load is at a level of model. I see a few problems with this.

  Our pricing will rely essentially on the amount of RAM. This seems to mean that I need to

  create a template for each possible RAM configuration and assign a cost to this model.

  It would have been easier if I could indicate the cost and required RAM on the custimaztion option. Seems to work well for CPU but not possible for RAM.

  Second statement, it doesn't seem to be sufficiently flexible. When I run a report cost for example it still shows VMs that have been downgraded.

  I would like to customize the reports. Is it possible directly? I guess I can work with the XML file, but that's not ideal either.

  Can Orchestrator help out me? VChargeback would be better for the load?

  See you soon

  Please consider my response as 'useful' or 'proper' marking

  Yes, LCM did a great job when it comes of the request, approval, commissioning, and auto-off service of Virtual Machines... but you're right, it is weak in the area of notification and chargeback. VMware Chargeback would certainly be a much better solution for the part internal billing of your solution.

  LCM reports are indeed limited, and creation of custom reports must be made through the vCenter Orchestrator Client. It's a bit of a process to create new reports and to make them display correctly in LCM, and there is no control over the order of the columns created Custom reports.

  Visit me on http://www.vcoteam.info for vCenter Orchestrator tips and tutorials

• OBIEE 11 G and custom reports

  I went to a presentation the other day about the new 11G. One of the things they said is that if you have custom reports and custom themes, you must re-create them after you have upgraded. The upgrade is supposed to destroy. I hope that I misunderstood.
  
  We keep all of our custom reports and dashboards in a folder in the catalog separate from outside of the edge of the box.
  
  We have created new areas with our own standard of naming separate from the outside of the box areas.
  
  When we improve, I really lose all the work we have already done? My dashboards will disappear? My reports will disappear? Can I import them back somehow?
  
  Panic'd to KC,
  B

  Hello

  But I still don't know if my custom reports will be upgraded too, otherwise they will be deleted.

  Reports of will not be deleted, but some reports may not run correctly... Many tests must be done...

  From the blog...
  We cannot wait for all the reports to start working out of the box immediately after an upgrade. Good amount of tests is necessary to ensure that all former applications most commonly used reports are working without any major problems. Also, not all reports would have migrated transparently because of significant changes in versions which does not recognize the utility.

  Kind regards
  Srikanth

• How to customize and difficulty permanently the size (zoom %) web pages in Firefox that Internet Explorer is: view - Zoom - Custom (percentage).

  How do I customize and fix permanently the size of web pages (zoom %) in Firefox than Internet Explorer is:
  View - Zoom - Custom (percentage).

  Thank you

  This can help you.

  https://support.Mozilla.com/en-us/questions/894000

• IE8 and it just started with a lot of error reports and custom back to the home page

  Well for a reason my first thread is not here so Im start again, I have IE8 and it just started with a lot of error reports and custom back to the homepage it just on the same page of the article, I was reading and said that this tab was recovered, I end up having to close on restarting the program n also since I reloaded my xp cd my sound got rough n jumps, it was well before I did this if Im not sure what to do. Im not exactly smart pc and am afraid of doing something wrong then Im left to do very limited things, any help would be appreciated

  Hello mikegrimesWQ,

  Because it looks like you have reinstalled Windows XP, what happens when you turn on your computer?  Windows loads correctly and allow you to connect with success?  Have you completed all the updates of Windows since the relocation?  Do you get errors at any time?

  What version of Windows XP you are using and which service pack is currently installed?  I would say confirming all your drivers are recognized and updated.

  How to download updates that include drivers and hotfixes from the Windows Update Catalog

  Please let us know status.

  Thank you

  James

• delete reports and custom forms

  Hi all

  EBS R12.2.4

  11 GR 2

  OL6.5

  Our developer created customized reports and forms the module AP.

  She put programs on the repertoire of forms and AP reports.

  When I run autoconfig, all programs when the abducted.

  How to avoid this problem?

  She said they are not was to create the custom directory xxx because Oracle will now charge this custom Setup?

  Is this true?

  Thank you very much

  JC

  Hello Jenna.

  There isn't any doc separate registration custom app.

  Unique doc ' Creation of a custom in Oracle E-Business Suite version 12.2 Application (Doc ID 1577707.1) "should take care of the creation of custom applications and recording as well.

  But, you must examine and use two documents Doc ID 1577661.1 & above for creating and using custom application/custom high doc.

  Kind regards

  Hugues

• supermetrics & vcops custom report

  Hi all

  I have a custom report in which I show a Supermetric.

  How can I do?

  The supermetric does not appear in the describe.xml file and its definition can be found in the database of the user interface.

  So, how can I put the supermetric in the user_ciq_metrics_collected.xml file?

  Thank you

  IG

  Unfortunately, this is not a very easy and simple process. But here's what you can do.

  Transfer Super-metrique involves the following steps:

  • Create package great metric attribute and assign it to the resource type. For more information about the metric development super pls. refer to the documentation of great metrics available in the custom user interface.
  • Ensure that the metrics super created appears in the section "all measures".
  • Find great key of DB alivevm metrics.

  (You can use the following address to execute DB queries: https:///vcops-custom/dbAccessQuery.action)
  select distinct attr_key from attributekey ak,resourceglobalkey rk where ak.attrkey_id=rk.attrkeyid and rk.supermetricid IN(select id from supermetric where name LIKE '%XXX%');
  

  • Update the file user_ciq_metrics_collected.xml in the Analytics and the UI VM using the great metric.
  • Create the xml file using the great metric to generate customizable view/report.

  Let us know if it works for you?

  Thank you

  Alex D.

• SSRS / Custom reports - see the error model

  Hello

  There is a problem in the custom report module (SSRS), the reports were works in version 6.0, but we get the error on the same report 6.1.

  When we tried to bebug the problem, we have found that the custom viewmodel used in the search for the EQT question.

  For example the model EQT visibility does not work.
  Example:

  < Type ParameterType = "PkgSpec" webControl = "ReportingControls/EQTInput.ascx" >

  < model displayVariableIndex '1' = > SearchableView:Config:ProdikaSettings/EQTConfiguration/GSMsvSearchableMultiSelectViews, PackagingSpecViewSingleSelect < / template >

  < / ParameterType >

  Error information:

  Object reference is not set to an instance of an object.

  Description:
  An unhandled exception occurred during the execution of the current web
  request. Please review the stack trace for more information about the error and
  originated in the code.
  
  Exception details:
  System.NullReferenceException: Object reference not set to an instance of a
  object.

  
  However, a different point of view model works fine 6.1 and 6.0:

  < Type ParameterType = 'Installation' webControl = "ReportingControls/EQTInput.ascx" >

  < model displayVariableIndex '1' = > SearchableView:Config:ProdikaSettings/EQTConfiguration/PQSSearchableMultiSelectViews, FacilityViewSingleSelect < / template >

  < / ParameterType >

  Wait for the viewmodel change there is no difference between these two configuration of custom report, please let us know, how to solve this problem.

  Kind regards
  Kumar

  Thank you Ivy for us help. We have finally solved this problem, because others benefit I he explains here. Let know if any additional question,

  a. the personalized view eqt file was missing and that we compared and added the custom view

  b. looks like that view reference for custom eqt rose from prodikareporting to webcommon in version 6.1. So, we have updated this reference

• Include the attribute custom report using the disc

  I'm to customize a script provided by Alan Renouf in his PowerGUI Powerpack.  The script I'm customization in the Powerpack is named 'VM disk sizes.

  His screenplay does everything we need from a point of view of output except that we can also include a custom attribute (Custom Field) VM as well as the information of the disk space.  I have included the below custom script, please note that this is a script/PowerGUI PowerPack we customize but was initially written and provided by Alan Renouf and all credit for this original work must be given to Alan.

  I have included our custom below script and have "in bold Red" line in the script that does not work:

  $AllVMs = get-View - ViewType VirtualMachine. Where {-not $_.} Config.Template}
  $SortedVMs = $AllVMs | Select *, @{N = "NumDisks"; E={@($_. Guest.Disk.Length)}} | Sort-Object-down NumDisks
  {ForEach ($VM to $SortedVMs)
  $Details = new-object PSObject
  $Details | Add-Member-Name name-value $VM.name - Membertype NoteProperty
  $Details | Add-Member - MemberType NoteProperty-name CustomFields-value (($VM.)) CustomFields | %{"$($_. Key) = $($_.) (Value)'}) - join ',')
  $DiskNum = 0
  Foreach ($disk in $VM. Guest.Disk) {}
  $Details | Add-Member-name "drive$ ($DiskNum) path"-MemberType NoteProperty-value $Disk.DiskPath
  $Details | Add-Member-Name "Disk$ ($DiskNum) Capacity (MB)"-MemberType NoteProperty-value ([math]: round ($disk.) Capacity / 1 MB))
  $Details | Add-Member-Name "Disk$ ($DiskNum) FreeSpace (MB)"-MemberType NoteProperty-value ([math]: round ($disk.) FreeSpace / 1 MB))
  $DiskNum ++
  } # end foreach nested
  $Details.PSTypeNames.Clear)
  $Details.PSTypeNames.Add ('Virtu-al'.PowerPack.VMGuestDisks) '
  $Details.PSTypeNames.Add ('Virtu-al'.PowerPack.VM) '
  $Details
  } # end foreach

  When you use the Get view as seen on the first line of the script, it appears the CustomField information not available in the generated view.  How to develop the view to include CustomFields/CustomAttributes for each virtual computer in our environment and then report on their subject?

  Please let me know if I did a poor job explaining the scenario and what I'm after here.  Any help is greatly appreciated!

  Hello, jSun311-

  Yes, you are right - there is no such thing as the "CustomFields" property on a managed object VirtualMachine .  You can always get the names and the corresponding values of the custom fields, you just have a little.  For example, you could change the line to:

  ...## make a comma-separated string that holds the custom field key/value pairs, like "cust0 = myValue0,cust1 = myDateInfo"$Details | Add-Member -MemberType NoteProperty -Name CustomFields -Value (($VM.Value | %{$oCustFieldStrValue = $_; "{0} = {1}" -f ($VM.AvailableField | ?{$_.Key -eq $oCustFieldStrValue.Key}).Name, $oCustFieldStrValue.Value}) -join ",")...
  

  and you should be happy as a clam.

  BTW, this call Get-view on your first line could be optimized a little using the - Filter parameter, like:

  $AllVMs = Get-View -ViewType VirtualMachine -Filter @{"Config.Template" = "false"}
  

  Pretty minimal in this case, but can be very useful in other scenarios of Get-View.  And, you may want to retrieve only the properties of the managed VirtualMachine object that you plan to use, so that the memory usage is reduced to the minimum, speed is optimized, etc. (do you this by using the - Get-mode property param).

  Anyway, how does do for you?

• Unifying Primavera - Configuration of custom report

  Background:
  
  We have configured Oracle BEEP and followed procedures in accordance with the configuration document. We must unify 9.11 in our environment.
  
  I have defined data views -> I was able to successfully perform the steps "Configuration-> new report--> report" . "» To run this report, I need to provide access of the company space and work within the Shell Instance.
  
  Now when I try to access this report. Miss me the c option if superior.
  
  I logged in as "OOTBADMIN": company Workspace-> Admin Mode-> access control-access User Mode-> company-> reports-> workspace > I can't see option "Custom Reports"

  
  

  Company Workspace-> Admin-> Access Mode control-> user access Mode-> shells/projects-> reports-> I can't see option "Custom Reports"

  
  

  Any help would be sincerely appreciated.

  
  

  Thanks in advance
  

  Once the report personalized, follow the steps below:

  Go to: company Workspace--> Mode Admin-->--> User Mode Browser Configuration

  Select Project/Shell on the right and double-click on who opens the Edit Project/Shell browser window.

  Locate the report published in the section Modules available and business processes (right).

  Select the report, and then move it with the arrow to the left in the middle of the reports tab (or any other subfolder under reports where you want than the State of residence) on the project / Shell Navigator (left side) and select OK.

  Reselect the project/Shell under the browser Mode, then select the button 'Deploy' on top. This will save the changes you made.

  Now you can give permission to the report (skip this step if the authorization is checked by default) and return to the report using the User Mode and you should be able to see the report.

  I would like to know if it works.

• Custom report - use of web app

  Hello world.

  Is it possible to create a custom report that shows how many times the individual web app components have been viewd over a period of time - say 3 months, 6 months, etc.?

  I looked at and if its there mising I keep it.

  TIA

  Hi Steven,

  This report can be seen through web apps-> point-> the view usage report.  However it can be exported at this point.

  

  Kind regards

  -Sidney

• Custom reports of IRR do not copy

  Request Express 3.1.0.00.32
  
  I'm almost the completion of a project with APEX and yesterday finished reporting. I defined the report by default so that saved several other points of view reports (click the tabs capable) for the needs of different populations. As always in the morning, I make a copy of my request and work outside the new copy, leaving the old copy in the case of a fatal error.
  
  The new app when executing the application ID, I noticed that the custom tabs did not show. I have disconnected and connected back with another account that has different privs and got the same result. In the old id app, customized report views are always present regardless of the connected account.
  
  If anyone has had this problem or how how to copy the application with custom views of IRR? I did an extra copy of the application thus think that they could have been a time to first print issue and had no chance.
  Thank you.

  Hello

  This corresponds to the known behavior. The settings that you have saved for a specific user are transferred.
  Already a lot of people want to see otherwise, so lets hope to get something like that in APEX 4.

  You can read to plu here ex: Public / interactive report sharing

  Kind regards
  Dimitri
  ----------------------------------
  http://dgielis.blogspot.com/
  http://www.apex-evangelists.com/
  http://www.apexblogs.info/

• The my folder view and all Emails are invisible on the backup PC

  I use Thunderbird for several years and a year and a half ago moved my TB *.default folder to a folder in Dropbox so that my email would synchronize no matter if I used my "daily driver" iMac, or backup PC running XP. Of course I properly edited the path to the new folder *.default"in the file profile.ini for each machine. It really worked slick, as it should.

  Although the PC gets started on every two weeks on average, I have to use Thunderbird on this, since I have upheld that it functioned normally by above - until now. I'm having a problem of material with my iMac, so I launched Thunderbird on the PC, and the folders pane, although there is now totally empty. The message pane shows no message, and when I click on 'Read Messages', nothing happens - does not change the view. Similarly, by selecting "Message pane - or overlay F8 - does nothing. There is no error pop up on launch. The folders pane is selected in the drop-down menu, and I've exhausted all options possible view and still can not all records (XP is completely up-to-date, end of support by way of derogation and I keep the antivirus updated PC and run on a regular basis.) Given that the PC is barely used, I very rarely found no problem with it.)

  When I open the error Console I see errors in the following lines: 784, 131, 250, 287, 2432, 287 and 300. I tried to copy and paste here, but it does not work (is there a way to save the error report in a text file?)

  It would be really nice to solve this problem so that I can use Thunderbird on my PC until I can get my iMac fixed. Any help will be greatly appreciated!

  I have just removed & re-installed TB, edited profiles.ini properly, and now everything is fine! Probably should have try this 1st (20/20 with hindsight and all that...)

• A way to find my previous questions and problem reports?

  Is it possible on this forum to find my previous questions and problem reports? Since viewing a question earlier today, I found the greater PART of the answer and would like to add that I found the question, without waiting for someone else to answer. I can't remember the title I gave to the previous question, or I would use this title in the search for it.

  Information troubleshooting below is most relevant to a previous problem that this question.

  Contributions my link on main page of the forum should display a list of all your job offers.

  See the search in this forum for your username under "posed by".