VM Templates and custom reports

Similar Questions

• opinion and custom reports

  Hi all

  I work hard on creating custom views / reports for clients.

  I wish I could customize them like:

  * When you build a custom report, is it possible to remove the first default pages (display / policy settings)?

  * It is possible to mix in a view, a table and a chart?

  Thks,

  Vinny

  * When you build a custom report, is it possible to remove the first default pages (display / policy settings)?

  [AlexD] NO.

  * It is possible to mix in a view, a table & a chart?

  [AlexD] No, you need two separate views for this.

• OBIEE 11 G and custom reports

  I went to a presentation the other day about the new 11G. One of the things they said is that if you have custom reports and custom themes, you must re-create them after you have upgraded. The upgrade is supposed to destroy. I hope that I misunderstood.
  
  We keep all of our custom reports and dashboards in a folder in the catalog separate from outside of the edge of the box.
  
  We have created new areas with our own standard of naming separate from the outside of the box areas.
  
  When we improve, I really lose all the work we have already done? My dashboards will disappear? My reports will disappear? Can I import them back somehow?
  
  Panic'd to KC,
  B

  Hello

  But I still don't know if my custom reports will be upgraded too, otherwise they will be deleted.

  Reports of will not be deleted, but some reports may not run correctly... Many tests must be done...

  From the blog...
  We cannot wait for all the reports to start working out of the box immediately after an upgrade. Good amount of tests is necessary to ensure that all former applications most commonly used reports are working without any major problems. Also, not all reports would have migrated transparently because of significant changes in versions which does not recognize the utility.

  Kind regards
  Srikanth

• views and custom reports

  Hi all

  I am working on a custom view & report for groups, I used for the test of the "CustomViewsAndReports.xml" provided.

  The creation through vcops - viewsreports.sh is OK:

  Total views: 3

  Creation View::VCOps.BadgesAndCounts

  Creation of Trend View VCOps.BadgesAndCounts for data center

  View trend created for data center VCOps.BadgesAndCounts

  ....

  reports are created in too:

  Report: VCOps.AllCustomViews

  Report for data center

  Added dc/VCOps.BadgesAndCounts view of the report

  But after glancing vsphere-ui & choose a data center:

  in views, I see new postings, but the names of row or column/description/titles are not displayed

  for example 'dc/VCOps.VMListBadges/table/title' instead of 'KP '. FancyVMList title.

  in the reports, I can't see all reports

  Thks,

  Vinny

  Have you tried to restart VCOps services?

• In my custom report template link doesn't work - Apex 3.1

  I created a report model based on my report columns
  
  The report of my query is:
  SELECT ID, NAME, MEM_DATE_NAIS BIRTH MEM_NOM MEM_NAS
  OF ACMT_MEMBRE;
  
  My custom report template have this definition of the line template:
  < tr onclick = "redirect ('f?)" p = & APP_ID.:6: & SESSION. (: 6:P6_NAS: #ID #'); ">
  < class td #ALIGNMENT # = "t16data_edit" > #NAME # < table >
  < class td #ALIGNMENT # = "t16data_edit" > #BIRTH # < table >
  < /tr >
  
  This would redirect to page 6, when the user clicks anywhere on a line, but it does not work.
  I have this error message:
  CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ("> CHECK$ 01'); ">
  
  I realized that this problem is caused by #ID # because if I encode this ID, it works.
  How my report model can get the 'ID' of my query report?
  
  Apex version: 3.1
  
  Published by: mario_romero77 on 8 June 2012 10:06

  >

  As requested previously, use .

  ...\
  

  Tags.

  Hi fac586:

  (1) my request report is:

  SELECT '''f?p=&APP_ID.:6:&APP_SESSION.:::6:P6_NAS:'||MEM_NAS||'''' LINK
  ,MEM_NOM NAME
  ,MEM_DATE_NAIS||decode(MEM_DATE_NAIS, NULL, NULL,' >') BIRTH_DATE
  FROM ACMT_MEMBRE
  

  I wouldn't try to include the quotes here: put them in the template (below):

  SELECT 'f?p=&APP_ID.:6:&APP_SESSION.:::6:P6_NAS:' || MEM_NAS LINK
  ,MEM_NOM NAME
  ,MEM_DATE_NAIS||decode(MEM_DATE_NAIS, NULL, NULL,' >') BIRTH_DATE
  FROM ACMT_MEMBRE
  

  (2) here are all the HTM in the sections of the report model:
  Models of the line: line model 1

  <tr onclick="redirect("#LINK#");">
  #NAME#
  #BIRTH_DAY#
  
  

  You cannot nest quotes of the same type (and note that this is not what you posted previously). Use:

  <tr onclick="redirect('#LINK#');">
    #NAME#
    #BIRTH_DAY#
  
  

  (3) the display attributes for the columns of the report are:

  Link: hidden

  As previously stated, in a model of named column, column values are not "hidden" just because the user doesn't see them: if it is referenced in the model column must be shown and "displays" in an appropriate form. In this case, it should be Standard report column. (Displayed as 'Hidden' will be generated a < input type = "hidden"... > element, which is where all of these weird attributes in the output of.)

• IE8 and it just started with a lot of error reports and custom back to the home page

  Well for a reason my first thread is not here so Im start again, I have IE8 and it just started with a lot of error reports and custom back to the homepage it just on the same page of the article, I was reading and said that this tab was recovered, I end up having to close on restarting the program n also since I reloaded my xp cd my sound got rough n jumps, it was well before I did this if Im not sure what to do. Im not exactly smart pc and am afraid of doing something wrong then Im left to do very limited things, any help would be appreciated

  Hello mikegrimesWQ,

  Because it looks like you have reinstalled Windows XP, what happens when you turn on your computer?  Windows loads correctly and allow you to connect with success?  Have you completed all the updates of Windows since the relocation?  Do you get errors at any time?

  What version of Windows XP you are using and which service pack is currently installed?  I would say confirming all your drivers are recognized and updated.

  How to download updates that include drivers and hotfixes from the Windows Update Catalog

  Please let us know status.

  Thank you

  James

• delete reports and custom forms

  Hi all

  EBS R12.2.4

  11 GR 2

  OL6.5

  Our developer created customized reports and forms the module AP.

  She put programs on the repertoire of forms and AP reports.

  When I run autoconfig, all programs when the abducted.

  How to avoid this problem?

  She said they are not was to create the custom directory xxx because Oracle will now charge this custom Setup?

  Is this true?

  Thank you very much

  JC

  Hello Jenna.

  There isn't any doc separate registration custom app.

  Unique doc ' Creation of a custom in Oracle E-Business Suite version 12.2 Application (Doc ID 1577707.1) "should take care of the creation of custom applications and recording as well.

  But, you must examine and use two documents Doc ID 1577661.1 & above for creating and using custom application/custom high doc.

  Kind regards

  Hugues

• SSRS / Custom reports - see the error model

  Hello

  There is a problem in the custom report module (SSRS), the reports were works in version 6.0, but we get the error on the same report 6.1.

  When we tried to bebug the problem, we have found that the custom viewmodel used in the search for the EQT question.

  For example the model EQT visibility does not work.
  Example:

  < Type ParameterType = "PkgSpec" webControl = "ReportingControls/EQTInput.ascx" >

  < model displayVariableIndex '1' = > SearchableView:Config:ProdikaSettings/EQTConfiguration/GSMsvSearchableMultiSelectViews, PackagingSpecViewSingleSelect < / template >

  < / ParameterType >

  Error information:

  Object reference is not set to an instance of an object.

  Description:
  An unhandled exception occurred during the execution of the current web
  request. Please review the stack trace for more information about the error and
  originated in the code.
  
  Exception details:
  System.NullReferenceException: Object reference not set to an instance of a
  object.

  
  However, a different point of view model works fine 6.1 and 6.0:

  < Type ParameterType = 'Installation' webControl = "ReportingControls/EQTInput.ascx" >

  < model displayVariableIndex '1' = > SearchableView:Config:ProdikaSettings/EQTConfiguration/PQSSearchableMultiSelectViews, FacilityViewSingleSelect < / template >

  < / ParameterType >

  Wait for the viewmodel change there is no difference between these two configuration of custom report, please let us know, how to solve this problem.

  Kind regards
  Kumar

  Thank you Ivy for us help. We have finally solved this problem, because others benefit I he explains here. Let know if any additional question,

  a. the personalized view eqt file was missing and that we compared and added the custom view

  b. looks like that view reference for custom eqt rose from prodikareporting to webcommon in version 6.1. So, we have updated this reference

• Include the attribute custom report using the disc

  I'm to customize a script provided by Alan Renouf in his PowerGUI Powerpack.  The script I'm customization in the Powerpack is named 'VM disk sizes.

  His screenplay does everything we need from a point of view of output except that we can also include a custom attribute (Custom Field) VM as well as the information of the disk space.  I have included the below custom script, please note that this is a script/PowerGUI PowerPack we customize but was initially written and provided by Alan Renouf and all credit for this original work must be given to Alan.

  I have included our custom below script and have "in bold Red" line in the script that does not work:

  $AllVMs = get-View - ViewType VirtualMachine. Where {-not $_.} Config.Template}
  $SortedVMs = $AllVMs | Select *, @{N = "NumDisks"; E={@($_. Guest.Disk.Length)}} | Sort-Object-down NumDisks
  {ForEach ($VM to $SortedVMs)
  $Details = new-object PSObject
  $Details | Add-Member-Name name-value $VM.name - Membertype NoteProperty
  $Details | Add-Member - MemberType NoteProperty-name CustomFields-value (($VM.)) CustomFields | %{"$($_. Key) = $($_.) (Value)'}) - join ',')
  $DiskNum = 0
  Foreach ($disk in $VM. Guest.Disk) {}
  $Details | Add-Member-name "drive$ ($DiskNum) path"-MemberType NoteProperty-value $Disk.DiskPath
  $Details | Add-Member-Name "Disk$ ($DiskNum) Capacity (MB)"-MemberType NoteProperty-value ([math]: round ($disk.) Capacity / 1 MB))
  $Details | Add-Member-Name "Disk$ ($DiskNum) FreeSpace (MB)"-MemberType NoteProperty-value ([math]: round ($disk.) FreeSpace / 1 MB))
  $DiskNum ++
  } # end foreach nested
  $Details.PSTypeNames.Clear)
  $Details.PSTypeNames.Add ('Virtu-al'.PowerPack.VMGuestDisks) '
  $Details.PSTypeNames.Add ('Virtu-al'.PowerPack.VM) '
  $Details
  } # end foreach

  When you use the Get view as seen on the first line of the script, it appears the CustomField information not available in the generated view.  How to develop the view to include CustomFields/CustomAttributes for each virtual computer in our environment and then report on their subject?

  Please let me know if I did a poor job explaining the scenario and what I'm after here.  Any help is greatly appreciated!

  Hello, jSun311-

  Yes, you are right - there is no such thing as the "CustomFields" property on a managed object VirtualMachine .  You can always get the names and the corresponding values of the custom fields, you just have a little.  For example, you could change the line to:

  ...## make a comma-separated string that holds the custom field key/value pairs, like "cust0 = myValue0,cust1 = myDateInfo"$Details | Add-Member -MemberType NoteProperty -Name CustomFields -Value (($VM.Value | %{$oCustFieldStrValue = $_; "{0} = {1}" -f ($VM.AvailableField | ?{$_.Key -eq $oCustFieldStrValue.Key}).Name, $oCustFieldStrValue.Value}) -join ",")...
  

  and you should be happy as a clam.

  BTW, this call Get-view on your first line could be optimized a little using the - Filter parameter, like:

  $AllVMs = Get-View -ViewType VirtualMachine -Filter @{"Config.Template" = "false"}
  

  Pretty minimal in this case, but can be very useful in other scenarios of Get-View.  And, you may want to retrieve only the properties of the managed VirtualMachine object that you plan to use, so that the memory usage is reduced to the minimum, speed is optimized, etc. (do you this by using the - Get-mode property param).

  Anyway, how does do for you?

• Need help in the development of different customized reports for SCCM 2012 using the Report Builder version 3.0

  Members of the Group of respected

  I need your urgent assistance to solve my problem, if someone who at least somewhat or large information please help me.
  My problem is related to SCCM 2012 and SQL server 2008.
  : - I have to develop a custom reports for SCCM 2012 for one of my clients. I have configured all the settings required for preparing the report, and I have examples of reports provided with sccm 2012.
  I get the problem while developing new relationships, if I have examples of reports that I have studied the corresponding reports. I don't get detailed information from the database to create query and get the desired result. As I have not idea of detail of this database structure in it.
  So I need help to create the query as I am new on this database.
  If anyone understand please give me help or link where I can build the report
  Thanks in advance.

  Forums for this product are here: http://social.technet.microsoft.com/forums/en-US/category/configurationmanager/

• Custom report for several Datastore latencies

  Hello

  I would like to create a report from the latancy VMware Storage model, but have the ability to account for the multiple datatstores. I need to create a new report template to do this, or do I have to create a Service with the data store and to report on this service?

  The only option I seem to get a store of data one selection.

  Thanks in advance.

  Giles program

  Hi Giles

  You use WVE 7.1 or earlier? I remember that the VMware storage latency report could run for the storage of personal data.

  From WVE 7.2, you should be able to run against all data warehouses. Keep in mind the report displays only with latency data warehouses.

  WVE 7.2 should be available in a few weeks.

  I hope this helps.

  Gaston.

• Custom report

  I want to create a customized report detailing Top Conversations for each of my network devices together. However, I want to exclude a certain application.

  Is there a way to filter this particular application? We use an application on our computers that connect to our phones. The SIP application is clogging my report and make the report Top Conversations not as useful as it could be.

  Advice would be greatly appreciated.

  Thank you

  -Evan

  Hey Evan,

  It is impossible to fliter on this request in the report, unfortunately.

  Mario

• Custom reports IPCCX

  Dear professionals,

  I am new to creating custom reports. To my knowledge, the only way to do it is to use Crystal Reports and query the database db_cra. This database provides the most granular information available? I know that there is a document database IPCCX schema, however, is there a document that describes the existing stored procedures?

  Thank you very much.

  -Michael

  Hello

  See the following URL for the custom reports for IPCC Express crearing.

  http://www.Cisco.com/application/PDF/en/us/partner/products/ps1846/C1067/ccmigration_09186a00801b08c3.PDF

  Concerning

  Srikanth

• HASH value in a custom report

  Hello

  I created a custom report for Top SQL on a monitored by Foglight Oracle DB. During the creation, for the input data, I check the HASH value. OK, it shows HASH values, but the format is not identical to the database.

  In the database, I have for example 432647

  but in Foglight report I 45 M or 67G.

  I am amazed. What is the problem with my report?

  Thank you.

  It looks like an inappropriate rendering engine has been configured for this area of the custom report. Did you leave the default rendering engine? If so, try some of the other converters and see if you get a better result.

  Kind regards

  Brian Wheeldon

• Share customized reports

  I just took a class from insight Analyzer and told me that if I created a folder and placed reports customized in there I can share with the team, but I followed his instructions and my team is unable to see the reports.

  Anyone know how I can do?

  Ensure that you have create and save your reports in the custom folder. Each instance Eloqua will have a custom reports folder located in "reports and dashboards. The default folder is called "Custom_ [your site ID] ' but can be renamed.

  After you have created your report, click on save or save as and then click the drop-down menu below so that you can select "Reports and dashboards" and then select the path to the custom reports folder.

  One thing to keep in mind is that if you save your report to the creation in the folder 'My reports' (it is a record of personal relationships) and later move your report in the public folder, you will always be the only user who will be able to see the report.

  It is also applied to any of the custom filters or the guests that you create to ensure that everything you want to share, you save custom public folder.