Virtual appliance for Veeam

Similar Questions

• Virtual appliance for device of firepower

  Hello people,

  I have a few questions re: unit of firepower. We mixed environment of ASA 5505/5520/5540 5525 X ASA models. We know that we can get a software module model X and start using the power of fire - PoC complete.

  Here's the concern:

  -Can be used stand-alone device of fire power to integrate with the traditional ASA firewall?

  There he virtualization OPTIONS because we do not want to buy hardware

  Your response would be greatly appreciated!

  Thank you

  G1

  You can put the Cisco of Sourcefire hardware brand devices the legacy online with your ASAs older (or newer) who do not have the fire power modules.

  Similarly, you can route your traffic through a virtual sensor if your VMware ESXi (Xen or PHEVS) hosts can be configured to sit instead in your network. Here is a link to plug (still in the former location of Sourcefire salesforce.com).

• Address deposit not set for a virtual appliance (CIQ), it does not support updates by CR

  I have a CapacityIQ evaluation courses. I need revoot our vCenter server this weekend and I got some errors.

  (1) repository address not defined for the virtual appliance for upgrades of WILL.

  Someone at - it understand why I see this error. Also, I'm not sure why VUM even tries to analyze the VA?

  Why you see the error: you see the error it's because our WILL is not configured to make the VUM updates and does not point to a repository VUM.

  Why VUM attempts to analyze this GOES: because it assumes that all going to will be set to VUM updated. As far as I KNOW, they will improve on this message error/logic in the near future. During this time you will see this error if you installed VUM.

• Oracle VM Virtual Appliances

  Hi all
  

  
  

  Oracle VM Virtual Appliances for Oracle E-Business Suite Deployment Guide, release 12.2.4 (Doc ID 1928303.1()

  The documentation says that:

  

  But when I login to root on my VM system and run:

  [root@db etc] # cat/etc/oracle-release

  Oracle Linux Server version 6.6

  
  

  Is this to say that the doc is not updated? or/etc/oracle - release only is not updated?

  
  

  Please help how to check.

  
  

  Thank you very much

  MK
  

  Hello

  I know this is an old debate and you probably understood the answer yourself.

  Just to post a response and close it, the document is not updated with the software that you downloaded.

  Nothing to worry about.

  Kind regards

  Bashar

• vSphere Data Protection Virtual Appliance 6.0 does not install

  I tried to install VDP 6.0 on ESXi 6.0 for the last day and I'm seriously about to launch smashing everything like the incredible hulk.

  There are thousands of guides, I have used them in the yellow on bricks. It installs, but as soon as he told me to go to the party for the configuration it simply can. It will not resolve the host name to anything. It irritates me even typing the sentence. I have virtual appliances for the vRealize Operations Manager, vCenter Server, both work perfectly and have been set up in record time. I change IP address, virtual LANs, DNS, reinstalled 4 times entries. I did all humanly possible simple configurations and the INVESTIGATION period will not solve so I can set it up. I try to put in place so I can prove the case for the VSAN still further it and it's making it really, really hard.

  Anyone having problems with the VDP 6.0 installs correctly?

  I was running into this same issue. Try to open this Web page that is part of the same subnet.

  Try another browser. I couldn't get it work well with Chrome, but with IE and Firefox.

  Post edited by: FrankChavez - forgotten browser problem.

• Import a virtual appliance

  Hello

  How it is possible to import the virtual appliance for ESXi console not supported (ALT + F1)?

  Tal

  ESX does not understand OVF in the 3.x series, he needs one. VMX file. You will need to use the converter or VI Client to get this type of VM in. This will change after the 3.x series, if I'm not mistaken.

• Virtual Appliance update hangs during the preparation stage of files

  It is a continuation of my attempt to upgrade this thread saga:

  

  I've been trying again to do the upgrade, but the last 2 attempts seem to stagnate outside in the scene where he says that she prepares the files, and mail is still delivered. Since it's the virtual appliance, I could make a snapshot before starting and then go back to it in case of failure, which I am very happy for.

  This same problem happened to me on an update there are several years and Sonicwall tech support person he restarted just for me and then again upgrade - if I remember correctly - and then it worked. But when I tried, he got always outside. Is there anything else I can try?

  Make sure you use the correct upgrade file.

  The one that ends with. sh.

  Make sure also that he has not been renamed or had added nothing to it when downloaded and saved.

  The other that you download is for the deployment of a new virtual appliance.

  If you are very low on disk space, you may need to look at what is using that space.

  What is the junkbox?

  You probably want to prosecute and to talk to a technician.

  If there is not enough free space, the upgrade process may fail.

• Nexus 1010 Services Virtual Appliance and VN-link hardware

  All,

  We deploy the Nexus 1010 Virtual Appliance service in order to use the analysis network (NAM) Module.  The 1010 necessary hosted of the MSM to deploy the 1000v switch into ESX.  We would also use VN-Link in the material by which we "get around" the virtual switch and use the 6120's for switching.  What I need to know, it's possible the 1010 always to analyze network traffic using hardware VN-link?  Hardware VN-link does not seem to need a VSM, so I think that the 1010 cannot monitor traffic because there is no "attach" to 1000v.  Anyone can shed some light on this?

  Kind regards

  Ken

  Ken

  The NAM module present in the 1010 is not exclusive for Nexus1000v traffic.

  Its there as part of a device which is be the VSM (1000v) and is set on its own.

  If you look at the Nexus1000v, the VSM (which is the 1010 and holds the NAM in this case) is * not * part of the VM data path.

  He's wanted for initial virtual port instantiations (veth) but after that the traffic does not go through it.

  So to send data traffic VM to the NAM module for analysis, another mechanism (such as ERSPAN) is used to route the data traffic of the VM is to her.

  The Nexus 1000v support ERSPAN.

  Same logic applies you have a NAM module-the 1000v can send traffic to it through ERSPAN.

  Looking to VN-link in hardware - there a MSM which is the INSTITUTION itself.

  In this case, the veth is on FI.

  If the FI did support ERSPAN (which is not currently), you can use the same NAM module or any other module of NAM for sending traffic to it.

  If this isn't a limitation of VN-link in hw methodology vs 1000v switching switching, but the fact that the FI does not yet support a mechanism of 'export '.

  I hope it helps

  Thank you

  -Matt

• Is there a mechanism to prevent the Virtual Appliances Cisco to be cloned or exported in the form of the OVF/EGGS?

  I am very confused why Cisco has no mechanism to prevent its virtual appliances are cloned or copied, for example I can install ACS 5.6, buy a license and deploy it, then I can export the virtual as appliance and the OVA file and deploy it elsewhere in other licenses without the need to buy another license, after the deployment of file EGGS I can even change the IP address , Default Gateway, NTP server or any settings that I want but license is valid in steel...

  Why the hell is happening?

  Not a bug, it's how ACS works now, it's your ethical standards if you break this system of 'trust' that Cisco has implemented. It is actually as most of the Cisco product was working at the time, and some products are back for this model (ASA APEX ex.)

• Is there that any VMWare based virtual solution for EMC storage systems?

  Hi, I take a rudimentary storage EMC class and know very little about it, but I use VMWare ESX 5.5, vCenter and other stuff and setup my VMWare Lab at home, I am amazed by the virtual technology, so I would like to know if EMC has any virtual appliance solution, so I can practice EMC VNX?  the class I take is called storage EMC ISM. \

  Thank you very much!

  Strange, VMware can't even stand this size. Is it the same in the .zip file as well as in the .ova (you can see/extract with 7zip for example)?

  André

• Run a Virtual Appliance on a vCloud Director 5.5 VDC/vApp

  I want to deploy a Sonicwall Email Security Virtual Appliance (VA) in a vCloud Director 5.5 VDC/vApp.  The VA is in OVA format.  How do you do this in Director vCloud?  I tried to import the VA using vSphere importing, but is does not appear as a selection.

  Thanks for the detailed info Alan.

  2014-12-08 23:14:53, 309 | WARN | backend-activity-pool-237 | VAppUploadManagerImpl | Transfer session: 91f2a458-f5b5-c 451-835-bec280e4165f. Error during downloading content: folder 8_0_6_2779 (e01dea52-17c6-4c26-a411-a88ceb10f0cb) does not exist in our inventory, but vCenter Server claims it does. | VCD=939f2481-9f68-4a39-a0a3-769fc9387b15,Task=65ad7396-5084-4E51-941a-a9f4abcdc657 activity = urn: uuid:65ad7396-5084-4e51-941a-a9f4abcdc657

  com.vmware.ssdc.util.LMException: 8_0_6_2779 (e01dea52-17c6-4c26-a411-a88ceb10f0cb) folder does not exist in our inventory, but vCenter Server claims it does.

  at com.vmware.vcloud.val.internal.impl.VC20VirtualEngine.waitForFolderInInventory(VC20VirtualEngine.java:2102)

  at com.vmware.vcloud.val.internal.impl.FolderUtil.createFolderIfNotAlreadyExist(FolderUtil.java:142)

  Can you please check if the vCD vCenter proxy running.

  Please see the links below.

  Cannot create the VAPP to vCloud 5.1

  http://www.Boche.net/blog/index.php/2011/12/16/vCloud-Director-and-vCenter-proxy-service-failure/

  vCenter | Tom Fojta & #039; s Blog

• vSphere Client reports an incorrect version of vCenter Virtual Appliance

  vSphere Client 5.5 reports incorrect version of vCenter 5.5 Virtual Appliance. For example, vCVA build is 1891314, but in vSphere Client 5.5 GUI shows like 1891313 or vCVA build is 2170515 (last U2a), but in vSphere Client 5.5 GUI shows as 2001466

  I've updated the client to the latest version 1993072, but it made no difference.

  Any suggestions are appreciated.

  Thank you

  Slawek

  This is a bug according to the support for VMware.

• Upgrade VMware Tools on Linux based virtual appliances

  I just updated a cluster of 5.1 to 5.5, some of the VMS are virtual appliances based on Linux (most of them on CentOS) which are fairly locked down (no easy access console) critical how's this for upgrade these types of virtual machines to the latest version of VMware Tools? I'm a little OCD and it bothers me that some of the VMS are VMware Tools reports that are "Stale" :-)

  Thank you.

  I know what you mean about the annoying notification bit... However, most of the providers WILL group and test vmtools as well as the Virtual Appliance that they release.

  The answer isn't vmtools upgrade, it has upgraded the Virtual Appliances.

  for example

  Installation of NetScaler virtual appliance on VMware ESX - Citrix eDocs

  You have a list of virtual appliances and you run versions?

  Chris

• readers fill on vFabric 9.2.4 virtual appliance

  We have 2 vFabric Postgres 9.2.4 virtual appliances running like a bunch of slave master to provide a database of space Horizon.

  The size of database of horizon is reported to 34 MB on the master server filled readers (taking the database offline) at the following locations:

  / dev/sdb 7.8 GB (/var/vmware/vpostgres/9.2/pgdata/archive is full file 16 MB)

  / dev/sde 1.9 GB (/var/vmware/vpostgres/9.2-archive is full file 16 MB)

  show_replication_status script gives the following on the master server:

  sync_priority |          slave | sync_state | log_receive_position | log_replay_position | receive_delta | replay_delta

  ---------------+--------------------------+------------+----------------------+---------------------+---------------+--------------

  0 | gr2cmnxvfpv02. CMN.net | Async | 2/48696CB8 | 2/48696AB0 |             0 |          520 (1 row)

  What is causing the 2 drives fills up so quickly? And how we can solve.

  

  Just a bit of background here...

  In your case, if you have a 7.8 GB of files in pg_xlog, this means that there is something like 480 WAL files saved in it. There may be more of (3 * checkpoint_segments + 1) files in pg_xlog (or 901 knowing that checkpoint_segments has a maximum of 300). Note that this is a soft limit and can be exceeded, but the WAL files will be deleted when this soft threshold is reached. Below this limit, when the WAL files are not needed, they are recycled by the system be renamed.

  VMware vFabric Postgres 9.2 differs also, a little Vanilla because it uses an algorithm called dynamic control point which allows to delay or speed up the time of a control point is kicked according to the workload of the server is facing, this is slightly different from vanilla Postgres... In this case the control point is controlled with checkpoint_segments_max and there may be more of (checkpoint_segments_max * 3) + 1 WAL files.

  More reference on the number of WAL files to vanilla 9.2 here:

  PostgreSQL: Documentation: 9.2: Configuration WAL

  So, to answer your questions:

  > So is there no way to manually clean up the files on the data disk?

  You should not remove files your server WAL because this would result in a corrupt system, you might need those WAL files in the case of a server crash for redo operations. So rely on the system for their elimination.

  You could accelerate that by kicking CHECKPOINT manually, just be aware that this operation is very expensive in terms of input/output. You can thus reduce checkpoint_segments_max manually in postgresql.conf, which by default is 300.

  > Are they just continue to grow like this for always?

  No unnecessary WAL files are recycled or eliminated by the system.

  > Why are there so many files for such a small base?

  These files are required to roll FORWARD operations. As far as I can see on your screen, all WAL files have the same timestamp, so don't you have an operation that could generate a lot of WAL, as for example that would make a huge bulk loading of the INSERT? That would explain why you have generated a lot of files without a checkpoint being hit by checkpoint_timeout.

• vSphere 5 vcenter server download virtual appliance

  Hello

  can a peovide a link to download vsphere 5 vcenter server virtual appliance... for use of the lab environment.

  I think that you need a valid SnS use of vCenter.  That said, it can be downloaded from

  http://downloads.VMware.com/d/details/VC50/dHRAYnQldEBiZHBqcA==