virtual flash resources management is unable to recognize the SSD not (marked as ssd)

Similar Questions

• Unable to recognize the Kodak 9250 AIO printer

  Original title: device

  I can't get my Dell laptop equipped with Windows 7 to recognize my Kodak 9250 AIO printer. I have at least 2 other laptops (1 Dell and Toshiba 1) mapped to the printer, but also a desktop computer. I've never had a problem with the configuration of other computers to the printer. Any ideas?

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  I understand that you are unable to recognize the Kodak 9250 AIO printer in your computer. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. What is the number of the model of the Dell laptop?

  Follow the steps below and mark the question:

  Step 1:

   

  Follow the steps in the link below.

   

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Step 2:

   

  Run Microsoft fix it from the link below.

   

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/en-us

   

  Step 3:

   

  Follow the steps in the link below.

   

  Find and install printer drivers in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• I had to uninstall flash player, but am unable to install the update.  I have reset the Mac Book but am still unable to install the update.

  Safari: Version 8.0.6 (10600.6.3)

  Mac Book: MacBook Pro (retina, 13 inch, mid-2014)

  I had to uninstall flash player, but am unable to install the update.  I have reset the PRAM book Mac & NVRAM + SMC re-set, but I am still unable to install the update via Safari or FireFox

  Still due once sort myself

  I downloaded the offline install app;

  http://fpdownload.Macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

  Up and running

• Satellite R630 - 11L - sometimes did not recognize the SSD drive

  Hi all

  I have a portable Satellite R630 - 11L and I just bought a Corsair F120 SSD for her, but my laptop a few times did not recognize the SSD drive and fails to start occurs. I searched on the Internet concerning the issue, but there are any topic related to my problem. in recent days, I have updated my bios but the problem remains. for example if I put the computer to sleep and he never wake ups as it should be. the blue windows screen 7 failure comes and an error message 'could not access the windows volume. If portable succesful started without problem occurs until I reeboot the computer. so most of the time I have to restart computer about 5 - 6 times to work normal. At the same time, I opened a topic on the corsair website. They told me to test my drive on another computer, so I test it on laptops, dell and hp to my friends, but there is no any problem don't like this.

  So I test my ssd on an another toshiba laptop R630 which has a different hardware configurations, the problem remains that laptop too...

  So I think toshiba may provide a bios update to fix this problem. This laptop really great, so I don't want to buy another.

  y at - it advice to solve this problem?

  concerning

  Hi machka,.

  > I think that here is the toshiba support forum. is not here?
  Here he s a Toshiba forum, that of right, but you can only chat with normal users like you and me. You will not find someone from Toshiba here.
  The forum is provided Toshiba but for Toshiba users to exchange experience on different products.

  So I think that the Quad is just. No one can say that every SSD is compatible with all computers. You need to understand this!
  There are hundreds of different players and computers on the market and I m sure that no one can test a new computer with all SSD on the market. This is not possible, because it takes a lot of time and more expensive laptops that I think.

  So if the SSD doesn't work, there is nothing that you can wait for the BIOS update.
  Otherwise, you must purchase another SSD. Alternatively, you can ask a service provider allowed in your country, maybe that technicians have already experience with some SSD in Satellite R630. Just ask for that, they are the first contact for you! :)

• MacBook does not recognize the SSD.

  Hello

  I would like to replace my HDD on my MacBookPro (13 "/ Mid 2010/ElCapitan") with an SSD. I bought a SanDisk card Ultra II 480 GB SSD and SATA to USB cable (this:http://www.ebay.co.uk/itm/251800670431?_trksid=p2057872.m2749.l2649&ssPageName=S % 3AMEBIDX % 3AIT TRK).

  I wanted to connect the SSD drive, format, make a copy of my HDD with SuperDuper! and change the part. But seems that my MBP does not recognize the SSD! I can't see it in disk utility, or in the office.

  What I am doing wrong?

  Thanks in advance.

  How have you plugged the SSD drive?  It is installed internally or externally via USB?

  Ciao.

• Samsung combo drive is unable to recognize the blank cd

  TSST Corp CDW/DVD TS-H492A is recognized in my system as a"CD-ROM/DVD-rom" as types of devices.

  She is unable to recognize and does no massage on inclusion

  -blank CD

  -already burned to data CDs, MP3, VCD

  However recognizes CDs like Samsung combo driver-utility, Philips lense cleaner, brand MP3

  I did repair the installation of Windows xp professional but has not solved the problem...

  Please suggest how to solve the problem

  combo drive is 6 years old

  -

  There is an update of firmware for this device that could allow it to recognize a variety of CD source correctly. If your computer is a HP, a source, because it is

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-24612-1

  If your computer is another brand, try thir web site. TSST is Toshiba Samsung Storage Technology. I did not a careful search for the drivers on this website but a zip of a very fast yealded.

  I see no reason that HP or any computer manufacturer would customize the firmware on a CD/DVD unit, so the update of the HP site would probably be good to go. Your call completely.

  Tom Ferguson

  Link is now fixed.

• Virtual PC on MacBook Pro doesn't recognize the Firewire Port

  I'm trying to run a Windows-only based software (Adobe Visual Communicator) and plug my camcorder via Firewire to my PC virtual VMWare Fusion.  However, the PC does not recognize the Firewire port when the camera is turned on. I have the correct cables, I can see the camera from Mac OS.  Please share thoughts or ideas.

  Sorry, but you're out of luck.  At this point, NO virtualization software is able to firewire devices to their guests.

• Computer, unable to recognize the drive tape Jensen with MP3 encoder

  Computer does not recognize the device is connected. Any ideas?

  Original title: tape of Jensen with encoder MP3 player

  Computer does not recognize the device is connected. Any ideas?

  =============================================
  If you connect the MP3 player to your PC via a USB cable and
  turn on is recognized with a drive letter to... Start / computer /.
  Devices with removable storage?

  Perhaps one or more of the books at the following link would be
  be useful:

  JENSEN AV PRODUCTS - Documents and manuals
  http://Ernie.Awa.com.au/Jensen/default.aspx

  And it may be interesting to try to adjust your AutoPlay settings.

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Windows 7: AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Windows 7: Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  How to set up the automatic run settings in Windows 7
  http://www.techtalkz.com/Windows-7/516004-how-configure-AutoPlay-settings-Windows-7-a.html

• Flash Builder 4.5 unable to find the debug version of Flash Player.

  I'm running into the following error message:

  C:\Windows\System32\Macromed\Flash\NPSWF32.dll

  Flash Builder cannot locate the required Adobe Flash player debug version. You should perhaps install the debug version of Flash Player or reinstall Flash Builder.

  You want to try to debug using the current version?

  I already went to the binding dialog box provided to download Flash Player debug builds.  I installed the Plugin and AX versions of the debugger.  Reboot all browsers, Flash Builder and restarted the PC for good measure.  I spent a good amount of time looking for information on this issue.  All the threads I found who were related to this issue was to present one must be achievable.  So I'm starting a thread on this problem.

  I'm running Flash Builder 4.5 on Windows Vista 32-bit.  I tried to use 3.6.24 FireFox and IE 8.0.6001.

  I started with the trial version and then purchased the license online.  I do not know if that has an impact.

  All the information to diagnose this problem would be greatly appreciated.

  Hi emat3d,

  Try to uninstall Flash Player with this uninstaller from Adobe, please make sure that you close all applications that may be using Flash Player. Then try again to install your Flash Player debugger. He has solved it for me.

• PE7 unable to recognize the Canon HV20 high definition

  Hi all:

  Unfortunately as some of you who may want to try your hand at editing HD, I just bought a few days before the announcement of PE8 PE7. For some reason, I find that PE7 (and my previous PE3) cannot recognize my Canon HV20 camera high definition it is.

  I can easily import regular dv - avi this Cannon, but when you try to import HDV files, it does not recognize the camera.

  The camera is connected via firewire and is recognized as "DV" camcorder but not as a camcorder "HDV". The film was recorded in high definition 1080.

  I hope that one of you with this type of device can help.

  On another note, it is possible to record in PE7 with HDMI?

  Thank you

  Lucio

  E-mail: [email protected]

  my computer: HP m9077c, Intel core 2 Quad Q6600, 32 bit, 3 G of Ram, service pack 1 with all the microsoft courses updated, 400G HD internal and external HD 1 t

  If you have your Premiere Elements project implemented for the HDV formats, it must capture from the HV20 via FireWire.

  If it is not, as an alternative, you can use the HDVSplit free capture utility. Video captured with this utility is compatible with Premiere Elements.

• Error Windows was unable to complete the format, not in CD/DVD format

  Original title: live file system error

  When you try to format a CD or blank DVD so that I can burn files on it, I get the following error message... "Windows could not complete the format".

  Specs: Windows 7Home Premium, SP1, 64-bit operating system. Thanks in advance...

  Hello

  1. How did you try to format the CD/DVD?

  2 is this problem with a particular CD/DVD or the CD? DVD?

  3. have you made changes on the computer before this problem?

  Try to format the drive in disk management.

  Also check if you can format it from another computer to check if the disc is dirty.

  You can read the following steps.
  USB storage such as flash drives and usually come preformatted by the manufacturer, so you will probably have to format the memory cards flash. CD and DVD, on the other hand, uses different removable hard disks and devices of storage formats. For more information about the formatting of CD and DVDs, see which should CD or DVD format I use?
  Formatting disks and drives: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

  It may be useful

• y510p does not recognize the SSD to the first boot.

  I have a new y510p that I received this week. First thing I did was to replace the HD 1 TB with my own OCZ Vertex 4 256 GB SSD Drive.

  When I turn on the laptop for the first time, it does not find a bootable device (through network devices, then says no bootable device). If I use ctrl + alt + delete to restart the laptop, it detects the drive on its own and begins booting in Windows.

  I would like to understand why this does not work the first time? I went into the BIOS and I saw that it says that there is no hard drive detected.

  This worries me a bit, like maybe one day, he decided to no longer recognize the drive after the ctrl-alt-del?

  Everybody that experience and have a work around?

  Thank you!

  Hey Z,.

  I appreciate your response! That's actually what I thought as well. What is strange, this is even after the firmware update, it seems, the question was always present, but I just had my laptop for a while and it booted up and it starts right in Windows.

  I was thinking about it. On the first boot after the update of the firmware probably had some time to "finalize" the update of the firmware, firmware update require a power cycle.

  Maybe the firmware update solve the problem after all, and it only took an another start after the initial report so that it can work properly

  I guess my advice to anyone having the same problem with a disc OCZ Vertex 4 is to spend at least 1.5 firmware (which is what I am now, and it's working properly). Beware that OCZ 1.3-> 1.4 and 1.4-> 1.5 will destroy the data on the disk, so if that's your primary drive, back up everything.

  I'm glad it works now!

• Snapshot Manager was unable to remove the snapshot but deleted the reference to it. Now what?

  I was working with my VMware Workstation, when I was running from not enough space on my host machine.

  I decided to go to my virtual machine and delete all unused snapshots to recover disk space.

  When I tried to do it, using the Snapshot Manager, I learned that it was not enough disk space to complete the operation, but references to the snapshot files have been deleted, which means I can try more to remove the old clichés.

  How can I recover diskspace wasted, now that the snapshots are no longer visible in the list of snapshots?

  I scoured my error log and came across this error message, so who can provide any useful information:

  Jan 11 16:02:17: vmx\

  DISKLIB-LIB: not enough space to combine. Have 644259840 bytes, 5607260160 bytes, of need. Jan 11 16:02:17: vmx\

  DISKLIB-LIB: Impossible to combine: there is not enough space on the file system for the selected operation (21903373). Jan 11 16:02:17: vmx\

  Combine the error: there is not enough space on the file system for the selected operation. Jan 11 16:02:17: vmx\

  PLATE: SnapshotCombineDisks has no 5 Jan 11 16:02:17: vmx\

  PLATE: SnapshotConsolidate has no 5 Jan 11 16:02:17: vmx\

  SNAPSHOT: consolidate has no 5

  First of all make sure that you have enough free disk space - and then create a new snapshot, and delete again.

  Who must complete the new snapshot Manager

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Cannot start the managed server - unable to get the property of the transaction log.

  I have a server that is managed in a cluster to a single member. The field is simple - server admin and a cluster, the cluster member.
  
  I can boot is no longer this server. When I try to start, he left after the following message:
  
  < BEA-000362 > < server failed. Reason: Failed to get the property of the transaction log. Make sure that the migratable Transaction Recovery Service is migrated on the current server before restarting.
  
  I've checked everything I can think or offers documentation of the error. There is only one target migratable in the field, the managed server. automatic migration is not enabled. I deleted the store by default from the file system, and it gets recreated at startup (so not a problem of permission of system files). I have Activate Server registration to any Transaction scope weblogic debug debugging tab, no additional messages are coming around this message.
  
  Target only shows migratable are hosted on the managed server and not the last migration status.
  
  So I'm puzzled. Can anyone suggest what I should look at?
  
  WebLogic 10.3.5, JDK 1.6.0_29 (64-bit), RHEL 5.6
  
  Published by: SteveElkind on August 28, 2012 11:54

  Hi Steve,.

  Then remove the cluster migratable option, it will sort your problem.

  Kind regards
  Kal

• Human resources management stops when I raise the heart rate

  I'm not talking exercise here, but something like mow the lawn. When the level of my heart going up to maybe 60% of my max (just above), my Apple Watch stops just save my heart rate. When I sit back it starts again.

  If I'm actually exercise using the app it works well

  What gives?

  Hello

  In General everyday wear, Apple Watch is designed to measure your heart rate regularly only when you're still / no active - it is normal for the readings not to take when you are active.

  When recording a workout through the training app, your heart rate is rather measured continuously.

  More information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support