EA4500 firmware upgrade failure and subsequent problems

Similar Questions

• BEFW11S4 v.4 and Vista - firmware upgrade failure

  Hello

  I've had this router for about 5 years, it runs with XP without any problem. Since I got a new laptop with Vista, the wireless connects for an hour or two, and then falls back and I have to unplug the router for five seconds, then reconnect to reconnect (my other laptop with XP has not this problem).

  I understand that there is compatibility between the BEFW11S4 v. 4 and Vista problems so I tried to update the firmware of dartybox.com and kept getting a message that failed. I hard rebooted the router but button of restart 30 seconds and the upgrade has always failed. I so re-set to factory settings through the online admin to the router, re-uploaded the implementation level and still got the emssage failed (I am sure that the model number & version is correct and I download the appropriate firmware upgrade).

  Is there anything else I can do another one) buy a new router; (b) living with school drop-outs; (c) remove Vista and go back to XP?

  Thank you

  Bigdank

  Genius! I have changed the name of code.bin, went to the admin > tab upgrade firmware and the upgrade file. I had a wireless without interruption ever since, even after the awakening of the laptop to sleep.

  Thanks for your help

• 200 d IOmega IX4 Firmware upgrade failure

  Hello

  I have an IX4 - 200 d which I inherited. Initially, it wouldn't boot and display only the symbols of USB stick/network after about 60 seconds.

  With some searching on Google, I created a boot disk USB with the firmware updated on this issue. All goes well until the Firmware upgrade begins. I go to the step of (what I assume is) the upgrade of the firmware and it gets 75%, hold for 5 seconds and then the machine stops.

  I tried to repeat the update of the firmware with all the drives present, with every other drive in the first slot and with all the disconnected drives. But it seems to behave in the same way.

  Is this a known issue? Or could it be a hardware failure?

  I'm pretty eager to find a solution - it takes a long time for me to accept defeat.

  The only other suggestion that suggested Dr. Google is to start linux and reformat the hard drive?

  Any help is appreciated.

  Kind regards

  Pete

  Hi André,.

  This case can be closed.

  After the above mentioned procedure eventually work, I didn't know that - ALL readers should be present and formatted during an attempt of USB firmware update / install.

  The link again on the forum - http://forum.nas-central.org/viewtopic.php?f=14&t=4401

  This seems to be the only solution.

  Kind regards

  Pete

• LaserJet M4345 MFP firmware upgrade failure using the HP Download Manager

  Hi all

  I have a LaserJet M4345 multifunction printer, and I tried to see if there is any updated firmware for the printer.
  When I try to access the web configuration interface, I see that the printer is running a firmware with 20070213 code 09.071.8

  I downloaded the software from the HP Download Manager to try to update the printer automatically with a simple procedure.

  The program finds the printer and said that she needed upgrade. He showed that the printer is model J7949E and current firmware V.33.14 while the update of the Firmware version has been V.33.21

  I leave the program to start the process of update, but as soon as I said to start the update immediately (do not), a new window will appear showing the status of update and it closed after less than a second, replaced by another saying that the firmware update was complete.

  Although I was skeptical about the process in so little time, I tried to check again the printer web configuration interface, but it showed that the firmware was always the same, I saw earlier (20070213 09.071.8). To try to detect the printer from the Manager software download HP found that the printer was still need upgrading (and asked me if I wanted to do now). Try once led to the same results.

  I tried to restart the printer, the program and the computer with no result.

  I'm running Windows 7 32 bit and the printer is connected to the router which I connect this pc wireless.

  If I can provide any other information, please let me know.

  Thanks in advance for any help you can provide.

  Piero

  Hey Unreal, the product that you have is a printer. These commercial products can be a little tricky. For the best chance of finding a solution, I would post in the forum for HP Business Support.

  You can find the Board Commercial LaserJet here:

  Business - LaserJet HP Support Forum

  Take care!

  Sean

• PS6000: Firmware upgrade failure of V5.0.8 to V6.0.7

  I have two old PS6000 storage and PS4000. a 2nd successful update to V6.0.7 V5.2.11. But the PS6000 is not updated once V5.0.8 to V6.0.7 and showing error 'you are unable to upgrade to this version due to compatibility problems, abandoned update". The two storage are not in production prior to upgradation so I did if factory them failed!

  I have also tried upgrade to 7.0.1 but couldn't so then tried V6.0.7 and improved PS4000 but not the other.

  I need to keep the two in the same group and version storage. Could you please help me in this regard.

  

  Thanks in advance.

  Johnny

  If you read the documentation update carefully, you will find the info of what version you can upgrade to the last or an intermediate version is necessary. Upgrade your 5.0.8 to 5.2.x first and than 6.0.7.

  Kind regards

  Joerg

• What 3115cn error code 117-363 average after a firmware upgrade failure?

  Hello

  I just got a replacement 3115cn after the former we failed in the warranty. I noticed that the firmware was old so just tried to update using the USB port and the printer is now saying to call assistance with error code 117-363. No power glitches or a bad power / data cables etc. He copied through the fine then just failed to complete startup after reboot.

  The only relevant fact that I can think is that the MPC had the latest firmware above as it has been transplanted across from the old, but the base firmware was older than the protocols supported in the CPC. That's why I tried to upgrade in the first place, I had lost a bunch of new features only have the old version of the installed base.

  I'll be the appellant first thing, but I wanted to ask if anyone knew in advance. (It would be a great help if each error code was listed on the web site of Dell, so I could get myself.)

  Kind regards

  Paul

  Message edited by paul_a_hill on 02/25/2008 17:39
  
  

• Router RV042 firmware Upgrade older and what is the Version 1, 2, 3

  We have a CISCO RV042.  We are about to begin a service IOPV with Joseph who declare:

  The RV042 is a wired router that requires no adjustment configuration for versions of firmware, that we tested.    NOTE: The Version 1 and 2 are compatible. Version 3 is NOT.  Revised firmware: 1.3.12.6 | 1.3.12.19

  Our router firmware is: 1.3.8.2 (February 12, 2007 10:43:08)

  We can upgrade to 1.3.12.6 or 1.3.12.19?  What is Version 1, 2 and 3?

  Hi David, V1 2 and 3 are the versions of the released router hardware. The best, I can say that the 1.3.13.02 is the last for routers V01.

  -Tom
  Please mark replied messages useful

• RN-102 firmware upgrade failure

  10200 NAS chassis if it starts plu (upgrade fails), can records be deleted and installed in another frame or read in a different way?

  Thank you for your help. We have resorted to Netgear Tech paid phone support which has been very helpful. It turns out that upgrading going on the first time, but the SIN hung up somehow. Everything is good now!

• Reinstall Lightroom and subsequent problems

  Dear community

  After uninstallation and reinstallation of Lightroom due to import problems

  in the library, I now get Adobe-messages that my "TEST VERSION".

  expires in a few days! I find it really strange and I would

  know if someone of you has experienced this

  --

  Markus Mutter

  Founder Oceanminded.co

  Ambassador Oceanconservation.org.uk

  Masters in sustainability & CSR

  What version of LR?

  In any case you must enter the serial number to a registered version. If it is for a subscription of the CC, all you have to do is sign in using the same Adobe ID membership is linked to.

  If for stand-alone version, depending on the version, all you have to do is enter a number of valid series or Sign In for LR 6, then enter a valid serial number.

• I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.

  I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.

  Mac or PC? Version of the OS? What version of CS?

  Have you tried to reset the bridge? CTRL (Windows) / Opt (Mac) + click on the bridge to start icon and select open boxes.

  Otherwise, you could manually delete the cache, but we need to know the answers to questions to say where he is.

• Problem the firmware upgrade failed WRT54G v8.2

  Today I tried to upgrade my WRT54G Router v8.2 for the latest Linksys firmware. But the upgrade was repeated each time when the progress bar reaches about 75%. It lasted more than 30 minutes and I had stopped the upgrade. Then the router has stopped working. I have reset and hard reset the router. I also tried the method of tftp to upgrade the firmware again. But the problem is still there. When I ping 192.168.1.1, I always get the message "Destination host unreachable". Could someone help me solve this problem? The power and light of the ethernet port light are always on. Is it possible to solve the problem? Any information is appreciated. Thank you very much.

  Do not use the wireless computer to update the firmware. Hard-reset the router for 1 minute and try this link and check if it works...

• SGE2010 - Firmware upgrade and config does not save

  Hi all

  I have a few questions, but ill start with what im trying to achieve.

  With the help of the EMS 2010 for Microsoft NAP with 802.1 x auth for access to the switch, which has led to some questions

  What I have: an EMS 2010 48 port switch firmware 3.0.0.17

  Firmware update: to ensure im not having not problems due to the old firmware, I tried to upgrade using ros_ls1_bp_ge_bx - 3020.ros to 3.0.2, by downloading the file through TFTP, the transfer is complete and that's all, nothing happens.

  Restarting the device: as part of the upgrade process, I thought I might restart, so I rebooted and found that all my settings were cleaned, as if a reset occurred... and add further pain, the backup of the settings I had taken do not appear to introduce themselves with a new request.

  NAP support: so I tested my server NPS (RADIUS) with NTRadping.exe and everything is good, however I can't the SGE2010 to talk to it... the authenticator State in the web interface is still listed as initializing... I'm not sure if it is a simple mismatch (where the attempt of a firmware upgrade), a tag that should be on the side of RADIUS or switch misconfig.

  So, in summary:

  (1) how the hell you upgrade the firmware?

  (2) why are none of my saved settings to restart the device?

  (3) if anyone one of them puts up with PAN and has all wisdom of bone beads, let me know.

  Hi Ben, once you update the firmware, you need to go to the active image, apply the second image. Restart the unit. Regarding the configuration of switch, you must save the configuration running at startup configuration

  Admin-> file management-> copy files (running at startup)

  -Tom
  Please evaluate the useful messages

• BDX4350KB Wifi adapter and firmware upgrade doesn't work do not

  It is a sequel to my earlier question about if the WLM-20U2 Wifi adapter will work in my blu - ray player.

  After buying the adapter I plugged it and a message 'not supported', if I tried to connect wireless it says there was no an adapter connected.

  So I assumed that this necessary upgrade, so I formatted a 1 Gb USB drive with the FAT file system, downloaded the file level (version 39 http://www.dl.toshiba.com/player/NA/GB/EN/BDX4350KB.html) and copied the file .bin on the USB.

  When I plugged into the player and said to check the disk for a file to update it tells me that "frontend file is not found"... There was only one file to download, and it wasn't in a folder so I guess I'm supposed to just copy that file on the USB drive.

  I checked the USB port with a memory stick with photos on and it works fine.

  How to get the upgrade to work in the hope that it will enable the wifi adapter to work?

  Thank you

  Have you checked the guide in PDF firmware update?
  [Update firmware BDX4350KB | http://fget.dl.toshiba.com/manual/install/10009/Installation_Instruction.pdf?fromPid=%2Fplayer%2FN A%2FGB%2FEN%2FBDX4350KB.html&f=Installation_Instru ction.pdf]

  _ * How to upgrade the F/W * _

  (1) update firmware requires the USB of size max.2GB. Please make sure you format the Flash DRIVE to FAT/FAT32 before you start the upgrade procedure.
  ? Create a new folder on the USB drive and name it UPG_ALL
  ? Unzip the firmware file and copy it in the folder UPG_ALL.

  2) turn on the BD? Drive and make sure that you can see the player's on-screen Menu.
  ? Insert the USB key containing the Firmware upgrade file in the USB of the Blu slot? ray player

  3) press the "SETUP" button on the remote control.

  ? Select keys on the remote control UP/DOWN
  ? Symptom
  ? Upgrade
  ? USB storage device

  4) press the OK button on the remote control depending on the USB storage device.
  ? Now the upgrade file is under research. Please wait massage will appear

• I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is on

  I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?

  No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.

• Displays the error message when download itunes and other updates, not microsoft... says mode without failure or installer problem

  Error code is displayed. indicates the mode without failure or installation problem, contact shop etc. where purchased.

  Hi PeterLloyd,

  (1) what is the complete error message you receive?

  (2) what version of Windows you are using on the computer?

  (3) updates are you referring?

  Method 1: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 2:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.