Unable to recognize the Kodak 9250 AIO printer

Similar Questions

• Need help Kodak 5500 AiO printer over the network.

  I have a kodak 5500 AiO printer. I have vista on all my computers (1 bureau and 3 laptops). I downloaded the sp2 for vista on all computers, after I downloaded sp2 desktop mouse and keyboard froze, I had to uninstall sp2 to make it work. Now the printer on my home network to print or not be discovered by my laptop. I can see the printer on the network to my laptop but I can't connect to it. The printer is on the desktop via a usb cable. I deleted the printer drivers and reinstalled and downloaded the software and drivers for the latest printer.  I need help.

  Thank you

  Phil

  original title: using network printer

  Everyone,

  That's what I had to do to get my printer working once Vista it has messed up. You do the first two steps on the computer to which the printer is connected. The last step that you do for your laptop or you want to connect the printer to the main computer. I hope this helps.

  Hey all,.

  We had this same problem...

  We had to follow the procedure proposed by Drompa...

  > 1) share permissions
  >> 1. In explorer, select C:\windows\system32\spool\PRINTERS
  >> 2. Make a right click, properties
  >> 3. Tab sharing
  >> 4. Advanced sharing
  >> 5. Check "share this folder".
  >> 6. Permissions
  >> 7. Grant everyone full control
  >>
  (> NTFS permissions 2)
  >> 1. In explorer, select C:\windows\system32\spool\printers
  >> 2. Make a right click, properties
  >> 3. Security tab
  >> 4. Edit
  >> 5. Add
  >> 6. Advanced
  >> 7. Find now
  >> 8. Select 'NETWORK '.
  >> 9. Ok
  > 10. Total control of the NETWORK grant

  AND THEN we had to install local printers, using the port trick...

  1. go to 'printers '.
  2. click on "add a printer".
  3 Add a local printer.
  4. "create a new Port.
  5. use the "Local Port" option
  6. on "Enter a Port name" enter: "\\Computername\Printername".

  And if all goes well should do!

  Good luck!

  Credit to Drompa and otherdreams to help out me.

  Phil

• I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me?

  I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me? I use windows XP. I tried port 5353 and this is what allows to Hello.

  You can check this article, but it's about Firefox itself do not have access.

  http://KB.mozillazine.org/firewalls

  Could you give the exact wording and punctuation of the message and try Googling yourself - when google you do not without importance and punctuation, words of group who are always together as original in quotation marks or hyphens message that google will look for these words together in that order.

• Samsung combo drive is unable to recognize the blank cd

  TSST Corp CDW/DVD TS-H492A is recognized in my system as a"CD-ROM/DVD-rom" as types of devices.

  She is unable to recognize and does no massage on inclusion

  -blank CD

  -already burned to data CDs, MP3, VCD

  However recognizes CDs like Samsung combo driver-utility, Philips lense cleaner, brand MP3

  I did repair the installation of Windows xp professional but has not solved the problem...

  Please suggest how to solve the problem

  combo drive is 6 years old

  -

  There is an update of firmware for this device that could allow it to recognize a variety of CD source correctly. If your computer is a HP, a source, because it is

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-24612-1

  If your computer is another brand, try thir web site. TSST is Toshiba Samsung Storage Technology. I did not a careful search for the drivers on this website but a zip of a very fast yealded.

  I see no reason that HP or any computer manufacturer would customize the firmware on a CD/DVD unit, so the update of the HP site would probably be good to go. Your call completely.

  Tom Ferguson

  Link is now fixed.

• Windows xp does not recognize the hp c6180 photosmart printer

  My windows xp does not recognize my hp c6180 photosmart printer

  Hello

  1. were you able to use the same printer without any problems before?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  See the following articles that may help you resolve this problem.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

• Computer, unable to recognize the drive tape Jensen with MP3 encoder

  Computer does not recognize the device is connected. Any ideas?

  Original title: tape of Jensen with encoder MP3 player

  Computer does not recognize the device is connected. Any ideas?

  =============================================
  If you connect the MP3 player to your PC via a USB cable and
  turn on is recognized with a drive letter to... Start / computer /.
  Devices with removable storage?

  Perhaps one or more of the books at the following link would be
  be useful:

  JENSEN AV PRODUCTS - Documents and manuals
  http://Ernie.Awa.com.au/Jensen/default.aspx

  And it may be interesting to try to adjust your AutoPlay settings.

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Windows 7: AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Windows 7: Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  How to set up the automatic run settings in Windows 7
  http://www.techtalkz.com/Windows-7/516004-how-configure-AutoPlay-settings-Windows-7-a.html

• Is it possible to get Windows 7 (the driver installation) to recognize the HP DeskJet 722C printer. ?

  I have a 722C Deskjet connected via a cable to a computer running Win XP on a network.  I just added a new HP pavilion p2-1102 with Windows 7 on the network.  Windows 7 sees the printer but will not install the driver because I can't use the USB port to connect the printer up so that Windows 7 can use the Windows Update.  Any suggestions?

  Windows Update did not work correctly on some systems, I think it's a matter of Microsoft.  In any case, it is only necessary if the 720C did not appear in the list.

  The next thing to check would be your OS.  You have an 32-bit or the 64 bit version of Windows 7?  As I mentioned above, if you have a 64-bit version you will need to install the patch here after having installed the driver but before printing, otherwise the spooler will break.

• virtual flash resources management is unable to recognize the SSD not (marked as ssd)

  Hi all

  In my lab at home, I am able to do with VMware vSphere Flash Read Cache (vFRC) practical, I don't have SSD on my desk.

  In vmware workstation-11, I created a 5.5 esxi and added the local hard disk. It is an SSD not and I've marked as SSD.

  in VC the reader is now considered ssd however in VMware vSphere resource management Flash when I click on add ability he is unable to see the SSD (not marked as ssd).

  Any suggestions on how to turn it on.

  Thank you

  Vaibhav

  As far as I KNOW, the SSDS should be visible as "local". You can run the command.esxcli storage core device list -d   and check if the device is showing as local ssd

  >>

  It was a disk formatted with the vmfs.

  >>

  I think that the disc does not have vmfs. Can you remove the vmfs and propose a normal, unpartitioned ssd drive

• PE7 unable to recognize the Canon HV20 high definition

  Hi all:

  Unfortunately as some of you who may want to try your hand at editing HD, I just bought a few days before the announcement of PE8 PE7. For some reason, I find that PE7 (and my previous PE3) cannot recognize my Canon HV20 camera high definition it is.

  I can easily import regular dv - avi this Cannon, but when you try to import HDV files, it does not recognize the camera.

  The camera is connected via firewire and is recognized as "DV" camcorder but not as a camcorder "HDV". The film was recorded in high definition 1080.

  I hope that one of you with this type of device can help.

  On another note, it is possible to record in PE7 with HDMI?

  Thank you

  Lucio

  E-mail: [email protected]

  my computer: HP m9077c, Intel core 2 Quad Q6600, 32 bit, 3 G of Ram, service pack 1 with all the microsoft courses updated, 400G HD internal and external HD 1 t

  If you have your Premiere Elements project implemented for the HDV formats, it must capture from the HV20 via FireWire.

  If it is not, as an alternative, you can use the HDVSplit free capture utility. Video captured with this utility is compatible with Premiere Elements.

• Unable to recognize the portable printer.

  3054 j611 printer.  great laptop worked until last week could not recognise the printer again. RELOADED software.  IPad and desktop work ok

  Think that I have now.  RELOADED software for about 5 times and now seems to work.

  Thanks for your help

• What is the most recommended aio Printer Printer wireless?

  I have an old one I have Mac, using 10.8.5, I Pad 2, I have 5 phone. Liked my old aio Kodak but you want a printer affordable wi - fi. The old HP printers ink costs were outrageous! Now, I'm a bit wary of HP.

  List of Apple AirPrint printers - topic AirPrint - Apple Support

• I have a new wireless router - printer MX890 to recognize the new router to print wireless?

  I had to replace my old router with a new wireless today.  How can I get the printer now recognize this new router so I can continue to print wireless?

  Thank you!

  Theresa

  Hello tabuzek.

  Please, try the following to connect to your new router:

  1. press the Menu button on the printer.

  2. Select Configuration Wireless LAN and press OK.

  3. If the WPS option appears, press the STOP button.

  4. Select the Standard installation option, then press OK.

  5. when your access point appears, select it and press OK.

  6. Enter your encryption key and press OK.  Use the Star (*) key to change the patterns of nature.

  7. check the key is correct, then press OK.

  8. once the connection is complete, press OK.

  9. press the copy for return to the default menu button.

  Once this has been done, try printing to test the device.

  If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.

• 5520 unable to recognize the usb connection

  I have a new 5520 Photosmart from HP that I tried to install a printer USB (Win XP, Service Pack 3). When installing, I get a screen where it tells me to turn on the printer and connect the USB cable. To do this, I find myself with the same screen with the options 'Back' or 'Skip '.

  The scanner is recognized as a device from the computer, but will not scan.

  The printer will print despite getting a message saying "Cannot communicate with printer" window

  I reinstalled several times. A solution would be welcome!

  Hello garedd,

  Welcome to the HP Forums! I understand your concerns with your Photosmart 5520. Try these troubleshooting steps to try to solve your problem:

  Please uninstall the software to printers on your computer. I'll give you a document from HP on Uninstall from Add / Remove programs. (Unplug the USB cable from the computer at this point.)

  Then clean your Temp folder on your computer:

  1) click on the Start Menu

  (2) open your box run

  (3) type folder

  4) press Ctrl and a set, which will highlight everything in this file

  (5) make a right click on your mouse, then click on remove

  Now, install the full features on the site of HP software here. (Do not connect the USB cable into your computer until it prompts you to connect.)

  If you are still having the same problem, please try another USB cable to see if that makes a difference.

  Also, I'll give you additional information on USB Device troubleshooting.

  Please send me your troubleshooting steps.

  Impatience on your part.

• HP Envy 4500: Mac running El Capitan will not recognize the HP Envy 4500 printer more

  Last week I was able to print to my HP Envy 4500 to my MacBook Air and MacBook Pro, both running El Capitan.  However, when I went to print today, no computer cannot find my printer.

  I tried everything I found on these forums of discussion... the network reset, feeding all turned off, turning off iPv6, etc. anything.

  I have a USB cord used to print today and when I went in the connected USB printer utility, I could select Configure the wireless, but again, make the message: not accessible device.  It notes the wireless network, the settings were downloaded successfully on my device, however, your Mac could not locate the device on the network.   My Mac is both connected to the same wireless network.

  Help!

  Hello

  I restart your Mac and try the above steps again - if it does not prove successful, I then reboot your router and repeat the steps.

• Unable to recognize the Notepad file extensions

  Recently, I found that my notebook is not recognizing the file extensions.

  Ex:
  1 recently, when I kept a Notepad with extension .py (python) file, it is not recognizing it as a python file. Its just show it as a document with the name «file.py» text
  2. I even tried other extensions by default such as .html, but his works also do not.
  3. in fact, I also tried another extension (.pth) to specify the search path for python... but it's just show it as 'file.pth' as a text document.
  So, I tried to use Notepad ++ to save files (.py)... his work!
  May I know how to solve this problem.

  Hello

  1. is the issue limited to the notebook?

  Try the methods provided below and check if the problem persists.

  Method 1:

  Clean the Windows XP Boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click Run.

  (b) type msconfig and then click OK.

  The System Configuration Utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (d) when you are prompted, click on restart to restart the computer.

  Method 2:

  You can try to reinstall the notebook and check if that helps.

  Insert the windows operating system disc into the optical drive of your computer.

  (a) click on 'Start' located in the tray at the bottom of the screen.

  (b) select Comand prompt.

  (c) type the drive letter of your CD drive (ie: D:, E :) and press the 'Enter' key.)

  (d) type "cd i386" then press the Enter"" key.

  (e) type "expand notepad.ex_ C:\windows\notepad.exe" and press the Enter"" key.

  (f) type "expand notepad.ex_ C:\windows\system32\notepad.exe" and press the Enter"" key.