Virtual machines Windows display "reboot and select the proper boot device or insert boot media in selected boot device.

Similar Questions

• Why Microsoft Virtual PC comes with Reboot and select proper boot device?

  Hello

  When that I start Microsoft Virtual PC 2007 it comes up with the following error message:

  Reboot and select proper boot device

  or insertion of the in the selected boot device bootable media

  How can I fix it?

  I am running Windows 7 Professional 32 - bit.

  Any help?

  You have installed an operating system on the virtual device?
  You have created a virtual machine. When you start it, it will try to start.
  There is nothing on the virtual drive so that the system asks to find a bootable floppy
  disk or CD/DVD.

  If you still need help, you can post in the Microsoft Virtualization forum listed below:
  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Sincerely,

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )

• computer not boot vista windows after moving it __error message: reboot and select the right Boot device.___or Insert Boot Media in selected Boot device and pressed key__

  My computer worked fine Windows Vista Home Premium. I stop him, he moved to another room, reconected everything and now it won't start. I just got this message:

  First: Hardware Monitor with a lot of temperature and tensions etc.

  Then: Reboot and select proper boot device.

  or insert media in selected Boot device key start and pressed

  You will probably have to open the computer case and check the cable from hard drive, graphics card, RAM, etc., to make sure everything is neat and tight fitting.

  Remove cards, and then reinstall them using to ensure that they are properly installed.

  See you soon.

  Mick Murphy - Microsoft partner

• I get an error. "reboot and select proper boot device or insert boot media in selected boot device and press a key" while using the hard drive.

  Replace drive hard hgst with seagate and when I replaced the hard drive from hgst orignial he says "reboot and select proper boot device or insert boot media in selected boot device and press a key" and when I tried to install OS it does not display the hard drives to install operating system.please help

  Hello

  Check your cable connections. If necessary check with the manufacturer of the motherboard System Support
  and Seagate Support.

  Make sure that settings/settings (BIOS/CMOS) often F2 that you start the computer is configured to start at
  on the CD/DVD first in the boot order.

  Seagate - Support
  http://www.Seagate.com/support/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why do I see virtual machines Windows 7 x 64 in double after the upgrade to Fusion 6.0?

  Join support information.  Would rather have only listed here.  The two seem to shoot to the top of the virtual machine itself.

  According to the information of the single bundle media of entries in the library of the Virtual Machine Windows 7 x 64 is actually a Virtual Machine.  So delete that which is not actually start a Virtual Machine.  (Council: Ctrl-click on the object and select Delete.)

• Open with: 'Application name' - 'Name of the Virtual Machine' (2.0.4) AND (2.0.5)

  Hello

  Looking for help here...

  I notice that if I try to open a file on my Mac with an application of my virtual machine (Win XP Professional) I get 2 options for each windows application:

  1. Windows Media Player - Windows XP Professional (2.0.4)

  2. Windows Media Player - Windows XP Professional (2.0.5)

  The 2.0.4 option never works but the 2.0.5 option. I know this has something to do with the upgrade to the latest 2.0.5 version, but how do you / is it possible to remove the non-fonctionnel 2.0.4 options?

  Help, please! It's pretty boring.

  I have only haveone of virtual machine set up.

  Rich

  Make sure that the virtual machine is turned off and not suspended.  First locate the virtual machine in the finder.  You can do it by Ctrlclicking on it from the library of the virtual machine and choose Show in Finder.  In Finder Ctrlthe .vmwarevm of the virtual machine and choose "show package content".  If some shows as a folder go there.  Of in the virtual machine folder, you will see a folder named Applications.  Applications are the links to the Applications that you open in the virtual machine.  Remove vouchers there should do.  You may be able to determine the good by the update and the last number should be also the most recent.  These changes to take effect, you will need to reboot or restart the finder.  To restart the finder press and hold Esc, command,Option, and choose finder in there and restart.

  You can also just delete the Applications folder and then start the virtual machine.  Once that the virtual machine is started just enter the unit.  Entering the unit will recreate this Applications folder with the correct files in there.  You should always restart or restart the finder once this is done before it takes effect in the mac operating system.

• Reboot and select proper on the Satellite L10W-B1768 boot device

  Dear

  I have this error in my Toshiba Satellite L10W B1768

  Reboot and select proper boot device
  
  or insert boot media in selected boot device and press a key

  I can't do recovery also USB does not work, I try to install windows from USB / driver external CD/DVD, but not the work redirect me to this page

  Reboot and select proper boot device
  
  or insert boot media in selected boot device and press a key

  I tried pressing the '0' key, nothing happens

  I tried "F12" don't get recovery options.

  also in the configuration of the bios not UEFI and CSM (in the advanced-> System Configuration)

  How can I solve this problem?

  Dear

  I have a problem in my toshiba Satellite L10W-B1768

  "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key.

  I do not get an option «HARD drive recovery» If I press the "0 or F2" key multiplication, even the boring massage.

  How can no recovery Option, I solve this problem?

  also I restore the values by defect of the BIOS but same problem

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Different drag / drop behavior of the mouse on different users on the same virtual machine Windows 10 Pro accounts

  I just upgraded to 8.1 on Mac OS X 10.11.3 Fusion "El Capitan" on a new iMac 27-inch 5K retina. The guest operating system is a new virtual machine Windows 10 Pro. I have two user accounts on the virtual machine, my local administrator account and another account local standard user. When I am logged into my account, I am able to drag and drop files to and from the guest to the normally Mac OS. As the mouse moves freely between the guest OS and the Mac. However, when I connect using the standard other account, I can't drag - move to and from the guest for the Mac OS. Also once I click into the virtual machine the mouse movement is limited to the virtual machine until I have press the buttons on the Mac to free the movement of the mouse to the Mac. I tried to uninstall and reinstall the vmware tools but the same behavior persists. Any ideas on a solution and why these two users accounts would act differently?

  Just phone with the help of VMware. They solved the problem in uninstalling and reinstalling VMware tools and change the following VMware Fusion preferences-> preferences-> General-> Gaming: to 'Never mouse optimize for games '. It has been set to 'always optimize the mouse for games '.  After that drag & drop, mouse movement works smoothly and perfectly now. Thank you VMware support!

• Accidentally, I put my virtual machine - Windows 7 - 4 MB RAM, and now I can't load and stop it!

  Accidentally, I put my virtual machine - Windows 7 - 4 MB RAM, and now I can't load and stop it!
  My Windows 7 virtual is stuck in start mode of Windows, but not I can't start it, nor can I stop to change the RAM to return to normal. Help! What can I do now?

  I use Macbook Air if it is useful and WM ware Fusion 6.0.3

  Hi Requiem88,

  Just to be clear, you press the Option key on the keyboard key then went in the Virtual Machine menu at the top of the screen and choose Force Shut Down who?  Looks like you force quit in the menu Apple have rather choose.  Force quit will put end to VMware Fusion, while the option Force stop menu stop permanently from Windows itself.

  See you soon,.

  --

  Darius

• You can edit vmx file while the virtual machine is running? And is it safe?

  You can edit vmx file while the virtual machine is running? And is it safe?

  Hello

  Moved to the forum of the Virtual Machine and the guest operating system.

  If you edit the VMX while the virtual machine is powered on change is not levied until the power off then power on (not reboot) and there is a good chance that the change will be deleted when turn you off the system. So it is not safe to do so.

  Best regards
  Edward L. Haletky
  VMware communities user moderator
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• Working in a virtual machine of shared folders and not another...

  Hi, I'm new to the community but have worked with VMWare Workstation for about 9 months now. I have a set of 5 VM that I run on a regular basis, and I had successfully implemented the shared folders in each VM to a central folder on my C: drive host. I now have new versions of several of the virtual machine and I am trying to configure access to the same shared folder, but it will not be displayed.

  After you set up the information in shared folders in the virtual machine settings, I go into the virtual machine on my computer and expect to see under readers network, "Shared Folders on .host '. Who does not appear and when I try to map a network drive to //.host/Shared files /, it can't find the network.

  I compared the parameters between a virtual machine that has the Shared folder working and one who does not work, and I can't seem to find any differences.

  Here are some of my system details, if it helps:

  VMWare Workstation Version 6.5.2 build 156735

  Host of OS = Windows Server 2008 (64-bit)

  VM OS = Windows Server 2003 (32-bit)

  I've updated the VMWare tools in the virtual machine

  I have ideas of what I can try to get this working. Thank you!

  Try to upgrade the virtual hardware version 7 - maybe it does.

  Why don't you use the entries for the disks in cluster? -of course, you know that they are not stable in WS 6.5

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Merge cannot make Boot Camp virtual machine: perhaps too many places of the VM?

  I get the error message, well known in the VM library window "Bundle" & lt; pathname & gt; "" / Boot Camp/%2Fdev%2Fdisk0/Boot partition.vmware.vm Camp "is damaged and cannot be opened."   However, my problem is not solved by the solutions proposed elsewhere in this forum.

  At the bottom of this post, I listed my host config and invited desired config.

  Here is a brief history, followed by what happened when I tried the solution of WoodyZ published here.

  • I had Windows XP Pro SP2 on my Boot Camp partition, but somehow ended up 'inaccessible' SigmaTel audio device and the Leopard installation DVD could not repair it.  I imported this partition to Boot Camp in the Fusion as a virtual machine.  This virtual machine is now stored on the external hard drive in "/ Volumes/ExternHFS/_CCCnonBackup/virtualMachines/Boot partition.vmwarevm"+ Camp.»  This virtual machine still works when loading in the merger, but the sound does not work, nor made a called M-audio Transit USB connector.  That's why I decided to create a new partition in Boot Camp with a SigmaTel audio device cool.

  • There are Kubuntu and NetBSD virtual computers stored in another default folder: yangguizi/Users / / Documents/Virtual Machines /

  • Using wizard Boot Camp in Leopard, I erased my Boot Camp partition and then recreated with a new installation of Windows XP Pro SP2.  (By the way, I've formatted this partition in NTFS.)  This Boot Camp partition is the device of SigmaTel installed and accessible from the control panel.

  So I wanted to make a virtual machine of the new Boot Camp partition.  When I opened the merger, I highlighted the new Boot Camp partition down and clicked on the arrow of comments are starting to the right.  A window saying "Vmware Fusion prepares your Boot Camp partition to run as a virtual machine.  This may take a few minutes.  This will be possible once. "That window remained open for 45 minutes.  Finally, I closed merge by clicking the choice of menu to quit Vmware Fusion.

  Thereafter, whenever I opened the merger, I saw the message "Bundle" / Users/yangguizi/Library/Application Support/VMware Fusion/Machines virtuelles/Camp/%2Fdev%2Fdisk0/Boot Boot Camp partition.vmware.vm "is damaged and cannot be opened.' " next to the new Boot Camp partition.

  When I highlighted this new Boot Camp partition in the VM library and you press the delete key, absolutely nothing changed, that I could see.  Right click on the list of this score showed that the menu choice 'delete' is gray.

  Then I closed the merger, and then manually moving the file to the trash "/ Users/yangguizi/Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp / '.

  The next time I opened the merger, a new icon for the Boot Camp partition has been displayed at the bottom, with the subtitle "Powered Off".  When I clicked on the icon start Guest, a new folder/Boot Camp / was created in the same place, and the never-ending open window showing "Vmware Fusion prepares your Boot Camp partition to run as a virtual machine.  This may take a few minutes.  This will be possible once. " Blah, blah, blah.  If the cycle turned up.

  I am at a loss what to try next.  Here are three assumptions about the problem:

  1. Fusion has been confused by the three communities during which I virtual machines.

• Fusion has been confused by the fact that I have, potentially, two virtual machines called "Boot Camp partition".  The older is actually a virtual machine hard disk external.

• When I installed XP in the Boot Camp partition, the external Firewire drive was running. Then installing Windows saw much more of partitions on which XP could in theory have been installed.  This may have confused merge somehow, even if I successfully installed XP on partition C, which was 32 GB.

Did fix you this problem?  Even if you haven't, what do you suggest me I try next?

Thank you, Yang Guizi

Host hardware: 17 "MacBook Pro; 2.33 GHz cpu; 3 GB of ram; Boot Camp 32 GB partition formatted in NTFS. external hard drive with Firewire 800 interface, partitioned in an HFS volume + and an NTFS volume.
Host software: OS X Leopard 10.5.5; running VMware Fusion 2.0.1 build 128865; Tracks of partition Boot Camp newly installed Windows XP Pro with Service Pack 2.
Software comments: I would like to convert the Boot Camp XP Pro SP2 in a VMware virtual machine.        Running VMs with Kubuntu and NetBSD since the hd internal.

You can just get rid of the all/Users/lincoln/Library/Application Support / directory / Machines/virtual VMware Fusion; It should all be recreated. The virtual machine to help naos is than the pretreatment of Boot Camp. You don't want to get rid of all the of them, the only one in the specified directory. For example, there is a blank template in Applications/VMware Fusion.app whence that of your home folder.

• Satellite M50D-A-10W - error "reboot and select proper boot device."

  I have a Toshiba Satellite M50D-A-10W passing me all nuts "reboot and select proper boot device."

  This has happened before and it was solved by ctr-alt-del and F12 to get into the BIOS where the date went back to some time in 2010 - after put so far and to change the boot device, everything worked fine... until the next day.

  Now I get the screen "reboot and select good boot device ', but the F12 key does not; I also tried F2... the message keep multiplying, no BIOS...
  Help, please!

  In some cases the BIOS is only accessible by pressing the button turn off force on the lower side of the unit.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  After that you were able to start the windows system, its highly recommended to update the BIOS as BIOS update would solve this annoying problem.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB4903N50000R01.htm