Virtual switch with virtual bases DMZ

Similar Questions

• My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  Is there another way to start the IPAD?

  Try the steps here:

  https://support.Apple.com/en-us/HT201412

• VMware Distributed Switch with VLAN

  Hi again,

  A lot of work with VLAN now.

  But just a quick Questions. Is there a documentation or HowTo Guides how to set up vSphare VMware Distributed Switch with several VLANS on a Switch GS724Tv4?

  

  But soon, I try to add a host or network, it is empty.

  This is probably an easy problem of VMware, but I try here first to see if someone has document guide HowTo so I can start with.

  Thank you

  Christian

  Never mind about this,

  I found the problem on my own, but perhaps a documentation would be great to have. But it's a good start to have the right license of VMware, before you start.

  * I was just out of luck when I thought *.

  / Christian

• problem with the base system device

  Hello! I have HP pavilion dv7-2250em, and I have a problem with the base system device. What should I do?

  Hello

  Maybe that's a problem with the card reader driver.  Try to download and install the driver from the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45046.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Configure BEFSR41 V.2.1. to use as switch with ADSL ZTE Modem in Bridged mode

  I found a thread of 2009 who has a link that could help me with this configuration, but the link does not work.

  I have a Linksys BEFSR41 V.2.1 and need to set it up, so I can use it as a switch with our ZTE 831 ADSL Modem, which is in bridged Mode.

  The IP address of the BEFSR41 changed to avoid a conflict with the address IP of Modem ZTE ADSL, which is 192.168.1.1 to 192.168.2.1.

  If the PC is connected directly to the ZTE ADSL Modem, I can access the Internet and I can access the Menu of Configuration of Modem ZTE.

  If the PC is directly connected to the Linksys BEFSR41, I can access the Menu of Configuration Linksys.

  If the PC is connected to the Linksys BEFSR41, and which is connected to the ZTE ADSL Modem, I can't access the Internet, and I cannot Ping the ZTE ADSL Modem.

  Please give me a URL that indicates how the Linksys BEFSR41 should be configured to use as a switch with my ADSL Modem from ZTE in bridged Mode.

  My belief is that after I have the Linksys set up, I then plug the ZTE ADSL modem in the Linksys unit and use it to DHCP.

  DRM for your time and help! Lanny

  1. I never told of any change on the Advanced Routing page.

  2 do not connect the internet port for ZTE with this kind of configuration. You cannot use the internet port.

  3. Once you set that you can use the remaining LAN for ethernet devices ports in your local network.

• What are the bare minimum commands to get a stack of PC6825 3 - switch with inter switch Link Aggregation?

  I am brand new to PowerConnect switches, even though I am familiar with the concepts of VLANS, aggregation of links and spanning tree.

  I am on a deadline to get some new ones installed 6248 in our baskets and get them functioning as a stack. What are the bare minimum commands for:

  • Three switches in a stack (master/Eve/member)
  • 2 ports grouped between each (total redundancy) switch with loops WITHOUT switching

  All the switches are running firmware v3.3.9.1 (January 2014).

  Thank you

  The range of interface Ethernet 1/g1-1 / g2 allows you to select the ports you want in the channel of the port. Page 293

  Channel-group 1 Auto mode to create 440 lacp lag page

  Select the Group of channels with interface port-channel 1

  Switchport page 601 in trunk mode

  Switchport trunk allowed vlan [VLAN you use]

  http://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/PowerConnect-6248_Reference%20Guide_en-us.PDF

• Operating a SG200-08 switch with case removed.

  I'll put a SG200-08 (8 port switch) within a 2U rack mount chassis.

  To improve cooling I thought I'd take off the outer case.

  Is there or are there problems with the help of the switch with the cover removed?

  Thank you

  Glen

  Hi Glen, the first question would be, the warranty is voided and you are not entitled to any help. The second question is static electricity and environmental concerns. The third question would probably be your property insurance.

  He is strongly against the recommendation to alter or change these units.

  -Tom
  Please mark replied messages useful

• Are there plans for the new ESW 500 models switch with PoE capability?

  I know that current models of ESW 500 switch don't have enough capacity to power all the switchports to 15.4, even if the ESW-540-8 p model has almost enough capacity to power all the switchports to 15.4.

  Reasons why new ESW 500 switch with PoE capacity are necessary:

  • The existing PoE 500 ESW switches have not always enough when these devices are deployed with the UC500:
    • 7945, 7965 and 797 x phones
    • series phones (not yet supported with the SBCS solution) 9900 and 8900
    • PVC2300 Surveillance Cameras
    • AP541N access points
  • The UC560 comes with all the PoE ports and requires at least an ESW switch be deployed
  • Version 48 ports gigabit switch ESW is currently available only in the version not PoE, and we need a version of 48 gigabit ports for users of the UC560 solution.

  Existing ESW 500 switch PoE capabilities are:

  • ESW-520-8 P: 60W
  • ESW-540-8 P: 120W
  • ESW-520-24 P: 180W
  • ESW-540-48P: 380W
  • ESW-540-24 P: 280W

  PoE of ESW 500 switch capabilities supporting 15.4 full power on all PoE PoE ports are:

  • 8 port: 123.2W
  • 24 port: 369.6W
  • 48 port: 739.2W

  Are there plans to release the new ESW 500 switch models increased capacity, enough to supply the full 15.4 to all PoE ports with PoE?

  Hi John - Thank you for your participation in the small community of business support. I talked to our switch product manager and want to share his response.

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  We have taken the conscious decision to deliver PoE as ESW and other switches for small businesses for several reasons:

  • Endpoints PoE more attract a lot less than the 15.4 W maximum power. Most IP phones are below the range of 7W.
  • A typical deployment would most PoE devices connect to a switch.
  • For these reasons, the ESW is not burdened cost with the PoE feature which would not be used most of the time.
  • All ports are still able to PoE you can connect up to 24 devices PoE Switch 24 ports to any point in time, as long as the handset is in the title of the budget.
  • Therefore, given that these products are intended for small business and the price is an important factor, we opted for this approach.

  We do not have a product at full power on all ports in the Cisco Small Business portfolio, except in the arena of 8 channels. Within Cisco, Cisco Catalyst products support this today.

  Thanks again for the question,

  Stephanie Reaves

  Cisco Small Business

• / close the switch with the media player 12 on windows 7 32-bit o/s

  I try to use the /close switch with media player 12 on windows 7 32-bit o/s, the media player opens and plays the file but does not close after the reading of the file.

  I expect that the /close should work when used in conjunctino with the /play after reading the site--> http://support.microsoft.com/KB/241422

  Some commands I tried:

  Start/min Mplayer2.exe /play/c:\alert.wav nearby

  Start/min /play/c:\alert.wav nearby wmplayer.exe

  This same exact command is currently working on Windows XP. Appreciate any help on this.

  Thank you

  Kalyan

  Hi Kalyan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/iTCG/threads/

  I hope this helps.

• the list of hosts with specific base attached?

  Hello:

  I am new to the script and hope someone will help me...

  I need to list all the host with a specific reference (on Update Manager) attached...

  I know the commands 'get-vmhost' and 'get-basic-test name', but cannot link together...

  Thank you

  You could tie these together like this 2 cmdlets

  Get-VmHost | where -filter {($_ | Get-Baseline -Name "test") -ne $null}
  

  You ask all ESX hosts and then you filter the resulting list.

  The filter passes only VmHosts with the base line 'test '.

• How to set the text to align with their base line, not their bounding box?

  

  Left: ' vertical align text to bottom'ed with black outline box

  Right: manually move the text with a smart guide to align with its base line. (what I want to achieve)

  As you can see in the left, text has its baseline under him, and his rectangle encompassing does not correspond to its base line. When I use align, it does not align with its base line but his rectangle encompassing.

  How can I make the text line up easily using their base line?

  You can actually get align text, but the method to make some features using the majority of people do not know:

  1. Select type > effect > path > describe the object
  2. in the preferences to put a brake on the front of the preview limits use

  

• Best practices for the configuration of virtual switches with ESXi

  So we have a dish network, no VLAN. I have a total of 6 NETWORK adapters per ESX host... Since there is no Service Console or is it shared with the Prod vswitch here is how I have the configuration of the NETWORK adapters.

  Keep in min, we use ESXi 3.5

  vSwitch0 - Vmotion - 2 NETWORK cards

  vSwitch1 - Vmkernel Port & Machine virtual port group - 4 NETWORK cards

  I have attached the screenshot.

  Please let me know if you do anything differently?

  Dave bang on! the IP of VMotion ESXi will be used for the same purpose. For many ESX on the brain, sorry.

  Each VM will get no more than 1 GbE over four network adapters. Once a virtual computer is given a NIC, it will remain on the NETWORK card using the default configuration and it is good because the virtual machines are distributed between the four of them.

  http://blog.laspina.ca/

  vExpert 2009

• connection with the base switch

  im running windows server 2008 with cisco switches, but when I connect a switch to one of my drops and add more than one computer to the switch, that it is not connect the computer that a network is running the rest does not get why?

  Hello joseconcepcion

  Your question would be better suited for our Tech Net forums. Please post your question on the link below. Thank you.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• RV082 SB + switches with functionality of tag vlan

  Hi guys,.

  I have a small laboratory data center at home, with 1 Server iSCSI and VMware ESXi 5.1 3 guests. I run a few linux servers and windows servers.

  And a couple of years ago I bought a Cisco SB double RV082 VPN router and a Netgear smart switch in order to have more segmentantion and management on my network and the virtual machines. I was really happy with the Cisco router, because of stability and functionality.

  But after a while, I wanted to learn VLANS and vlan tagging and discovered that I wanted to create interfaces for the different VLANs. I installed the firewall open source pfSense, in order to create these VLANS with tagging of the firewall and on switches/esxi hosts. The pfSense has been installed in a virtual machine on one of the hosts vSphere, and which has become a headache if something happened to the host. So I decided to go back to the Cisco SB RV082.

  So here's my question:

  Is it possible to still have all these VLANS that I created on the switches and ESXi hosts when I swap to the Cisco router? Even if the Cisco support only port service VLAN, this shouldn't be a problem? Because of the Multiple subnet feature? These VLANs will have access to the Internet and does not have access to another. Only the primary network management network should have access to the VLAN.

  Let's say my primary network is 192.168.1.X and I have 5 VLAN with IP 192.168.2.X,... 3.X... 4.X etc. To be able to use these VLANs on all devices, do I need to assign each VLAN on the Cisco to a specific port? Which means I'll have 5 Cisco cables to the switch?

  I'll probably have a DC with DHCP and DNS on a few of VLANS I create. If DHCP for the different VLANs will be created like that and won't have the firewall (which RV082 can't stand?)

  In my head, this logical text/topic. But I'm not quite sure if you guys understand what I'm saying or want to accomplish here. So please don't not to ask :-)

  Thanks in advance.

  Hi Ruben, this router supports the only port VLAN basis. It does not support any tag VLAN (802. 1 (q). This is reflected by in, VLAN does not matter them, only the subnets.

  If you need the subnets to communicate through the router, you can activate the functionality of multiple subnet.

  If you want to limit disclosure of the host, you can try to establish access rules to limit communication subnet.

  -Tom
  Please mark replied messages useful

• How to reconfigure wireless network extended with several base stations

  I have a wifi network in an Airport Extreme wired to the modem from our Internet service provider and an Airport Express Terminal extended wireless in another part of the House. I recently added a second Airport Extreme (also extended wireless) to boost coverage in another area of the House. I want to have the Express and the extreme second each wireless connection directly to the base station to the modem to have the shortest path to the main base station, but the Airport utility network diagram seems to keep showing the network of linearly (main Extreme base - second extreme - Express). So, two questions: first, represents the schema of utility Airport the signal path real (linear Express by Extreme II, then to Extreme II/modem)?  And secondly, if so, how to reconfigure the network to have both Express and Extreme II forking the extreme base I directly, rather than having the food by Extreme II, then Extreme I Express. The network showed that the desired branched network yesterday, but today went back into the linear trajectory. I tried a simple drag and drop graphic to move the Express, thinking that surely the Apple would implement such a simple, logical and direct way to manage the network, but no. Have not seen another way to configure the network manually, so any suggestions would be appreciated.

  It is very important to understand that Apple "extend a wireless network" works on signal strength.

  In order to have the AirPort Express and AirPort Extreme to extend the network of the 'main' extreme wireless, two conditions must be fulfilled:

  (1) the AirPort Express and AirPort Extreme extension should both be on the same relative distance of the extreme 'main '.

  (2) AirPort Express and AirPort Extreme extension must both be closer to the extreme 'main' they are to each other.

  In other words, a well put together would have your "main" AirPort Extreme in the middle of the House, with a Terminal AirPort Express on one end of the House and the AirPort Extreme to the other end of the House.  In this configuration, the two airports are about the same distance from the extreme 'main'... and... "" oth extending airports are located more close to the "main" airport that they are with each other.