virtual vMotion with own IP is not possible

Similar Questions

• P50/P70: Upgrade with WWAN later is not possible anyway?

  Hello

  So maybe this is already known by everyone in the world, but me. As the P50/P70 come pre-installed with no WWAN module, but with the antennas and cables already present antenna, presumably it can be upgraded with the WWAN module when it becomes available?

  Now, that seems in German (item 38): http://www.notebookchat.com/index.php/topic, 55724.30.html

  For those who don't read German no, here is a rough translation of what the author/reviewer to Notebookcheck.com, Andreas Osthoff, wrote:

  "

  Hello everyone, we have now a statement from Lenovo on the LTE modems:

  "The current P50 ThinkPad and Thinkpad P70 are unfortunately NOT" WWAN (LTE) READY "even though that some models were already pre built with the necessary antennas. As it seems at the moment - probably not it is possible that an option of post-installation WWAN (ETL) for P50 ThinkPad and ThinkPad P70 will come.

  The reason:

  The WWAN (LTE) module works at a frequency of 2133 MHz, the same as the used Skylake CPU with @ 2133 MHz DDR4 memory. This causes "interference" to occur, i.e. superposition phenomena when radio waves collide.

  "

  He also wrote that the P50/P70 will be delivered with WWAN/LTE April pre-built options.

  For me, the P50 Thinkpad more like a product rushed. The bad thing for Lenovo, it is their top-of-the-line Workstation laptop series.

  I'm still hoping that this statement was made to someone at Lenovo who didn't know what he was talking about, but knowing the bandwidth of the LTE channels 2.1 GHz, it seems likely that the statement is correct.

  So Lenovo: Is the information which the above correct?

  If so, what CAN be installed in the WWAN slot, now that the antennas are already pre-installed, considering that you are using a whitelist for WWAN modules?

  
  

• Market with power supply is not possible on the Satellite M60-167

  Hello

  I'm sorry for my English saw. I have a problem with my Satellite M60-167. When I have connected the laptop with power supply and press the 'Power', then does'nt start Notepad.
  When I use only the battery and push a lot of times the "Power Button", that the laptop will be started.
  Question: It is a problem of material or not. This laptop that I bought it in January 2006.

  Can you help me?
  Thank you very much for your theory.

  AX.

  Hi Axel

  My theory is that there may be some problem with button / stop himself (white metal under the button), or perhaps with several Planar cable wire.

  Also, for me it is definitely hardware problem. If you want, you can contact the partner of service allowed in your country and see what they have to say about it.

• Qosmio x 870-Drag & drop with alt - tab is not possible using the touch pad

  Hi all

  I have a problem with my Qosmio x 870 and drivers touchpad Synaptics on Win7 64 bit.
  They do not drag-and - drop between applications.
  As soon as I press Alt - Tab, all by dragging a file to switch to one another application, dragging instantly stops.

  I use official & later (15.3.41.7) drivers of Toshiba touchpad http://goo.gl/pKHAI here

  I tried to install the generic Synaptics drivers and they do not have such a problem.
  With them, everything works very well with drag and drop.
  However, their implementation of two fingers to scroll is really buggy and more than half the time it does not work so I can't use them.

  Does anyone know if this bug and when?

  Any help? Thank you!

  Hello

  Maybe you should check the settings in
  Control Panel-> mouse-> advanced-> Advanced Settings tab

  There is an area called operations during key entry
  Make sure that the options are not checked.

  You said you tried the driver generic Synaptics you chose this one:
  http://www.Synaptics.com/resources/drivers

• Connection with SQL * more is not possible

  Hello together,

  I have a problem with my database and SQL Plus.

  I can't connect to my DB via SQL Plus, I get the error message: > > ORA_12546: TNS: detonation verweigert (Permission denied) < <.

  I tried it with several users. When I try to log in to enterprise manager or connecting to the DB through SQL Developer works very well with the user > > sys < <, only the SQL more connection does not work.

  It works until yesterday that there are some problems with the DB and the processor and RAM were almost 100% occupied each.

  
  

  We use the Version 11 g Enterprise Edition Release 11.2.0.1.0 64 bit Production on a Windows Server 2008 R2 Enterprise Server.

  I am running SQL Plus, Enterprise Manager and SQL Developer directly on the DB server.

  When I start SQL Plus he asks me my username > > enter user name: < < and after that my password: > > password: < <.

  A connection as seen in many forums or document on the internet like > > scott/tiger@ORCL < < never worked on my system, which is also confused me.
  

  
  

  We have no listener.ora file in the folder: ORACLE_HOME/NETWORK/ADMIN only a sqlnet.ora with line > > SQLNET. AUTHENTICATION_SERVICES = (NTS) < < in it.
  

  
  

  
  

  Status of the listener:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------
  

  C:\Windows\System32 > lsnrctl status

  LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18 February 2014 12:14:32

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  TNSLSNR for Windows 64-bit version: Version 11.2.0.1.0 - Production

  Start date February 18, 2014 10:15:54

  Uptime 0 days 1 hour 58 minutes 42 seconds

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  O:\app\administrator\diag\tnslsnr\QualisysDbNbg\listener\alert\log.XML log listener

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=QualisysDbNbg) (PORT = 1521)))

  Summary of services...

  Service "orcl" has 1 instance (s).

  Instance "orcl", State LOAN, has 1 operation for this service...

  The command completed successfully

  C:\Windows\System32 >

  ---------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  I hope someone can help me with this problem.

  
  

  Thank you you very much in forward for your answerand greetings

  Matthias
  

  
  

  The sys user must connect as sysdba

  have you tried

  sqlplus 'sys@ORCL as sysdba'

  or

  sqlplus 'sys/yoursyspwd@ORCL as sysdba'

  the first command should work without password for all users group ORA_DBA.

  Scott, the user cannot also exists in your database.

• Signature of a PDF with a tint is not possible

  Hello

  I created a form with Adobe Acrobat Pro XI. Now, I want to fill it with data. It works well just both in Acrobat Pro as well as in Acrobat Reader. However, I would also like to sign my (non digital) document. This should be possible, as I saw it on several sites Adobe FAQ and help. However, none of these Solutions have worked.

  When I click on the form a window asking me to create or use a digital display is displayed.

  Can you please give me some advice? I remember that it was possible some time ago.

  Cordially Kind

  Until

  Hello

  Please check if the fill tool & sign is absent in the other PDF files as well.

  This tool may be missing due to the presence of the signature digital security restrictions field or in the PDF file.

  Otherwise, you could try to uninstall and reinstall reader XI from here:

  http://get.Adobe.com/reader/otherversions/

  Let me know how it goes.

  Kind regards

  Ana Maria

• Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices with my Apple TV remote and SIRI HomeKit!

  Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices of HomeKit with my SIRI voice remote control and using Apple TV!

  If the new apple TV can act as a concentrator HomeKit and I use SIRI on my iPhone to control my locks, thermostat, lights, etc. Why am I not able to do the same thing with SIRI via voice commands on my Apple TV remote? When is this going to work?

  Also, when Apple will come out with a response to the echo of Amazon? I've tired to wait... do it already! If you build it, they will come...

  Thank you!

  This is a community to a user, and Apple will not see your rant. If you have suggestions about Apple TV, Siri and HomeKit the best thing to do is to submit your comments here. http://www.Apple.com/feedback/AppleTV.html

• AT300-101 / AT305 - recovery with root is not possible

  @ all

  We have 2problems:

  -mini-usb dosnt mount ntfs sticks/drives
  -umts stick does not work
  -recoverys with root are blocked

  I can't root on this unit?
  a lot of little things you need to root!

  Thank you!

  > Can I root on this unit?

  As far as I know that's not possible.

  Maybe you should take a look at other pages 3rd party as forum.xda - developers.com

• Adobe CS6 Muse app, not with subscription. Is this possible?

  I want to buy Adobe Muse in the current state alone CS6 app, not with subscription. Is this possible?

  Complete CC and CC single App for new subscribers did not include BC of hosting for sites of production since May 1, 2015. See How to redeem your free creative cloud sites>. Two subscription plans include up to 99 active test sites on BC to accommodation for testing purposes while developing a site.

  In terms of BC accommodation and using only the Muse, CC complete and unique App are equivalent. For the accommodation of production sites, hosting BC can be purchased or a Muse site can be downloaded on any other host that provides the standard Web hosting.

  A full subscription CC offers many advantages over a single App, but BC subscription other accommodation benefits is not among them.

• Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem

  Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem?

  Hello

  Please see try to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope that helps!

  Kind regards

  Sheena

• Import of duplicates with "Add" in Lightroom 2015.2.1 is not possible.

  Import of duplicates with "Add" in Lightroom 2015.2.1 is not possible.

  I have try to add photos on my hard drive for the catalogue of lightromm since the new version of Lightroom. But Lightroom says that are duplicates of already existing photo and does not matter to them. Yes they are duplicates that are in other folders, but in older versions, it was possible to slect or deselect 'import duplicates. " I can't find this option more. Where is he? Maybe you can help me. Thank you very much.

  Best regards

  Andreas

  Hi [email protected],

  The option to "Import suspected duplicates" has been deleted since the last release of Lightroom CC 2015.2.1.

  However for re-import images in Lightroom, you need to rename the images in Lightroom and then import them.

  Kind regards

  Tanuj

• Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine

  Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine. My questions is the correct statement to the variable: $VmCreated7DaysAgo: $_CreatedOn "-lt" $CDate7.

  # #SCRIPT_START

  $file = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\VM-Repo.csv".

  $Import = import-csv $file

  $VMCreatedLast7RDayRepoFile = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\Last7Days.csv".

  $start7 = (get-Date). AddMonths(-1)

  $CDate7 = $start7. ToString('MM/dd/yyyy')

  $VmCreated7DaysAgo = $Import | Select-object - property name, Powerstate, vCenter, VMHost, Cluster, file, Application, CreatedBy, CreatedOn, NumCpu, MemoryGB | Where-Object {$_.} CreatedOn - lt $CDate7} | Sort-Object CreatedOn

  $TotalVmCreated7DaysAgo = $VmCreated7DaysAgo.count

  $VmCreated7DaysAgo | Export-Csv-path $VMCreatedLast7RDayRepoFile - NoTypeInformation - UseCulture

  Write-Host "$TotalVmCreated7DaysAgo VMs created in 7 days" - BackgroundColor Magenta

  Invoke-Item $VMCreatedLast7RDayRepoFile

  # #SCRIPT_END

  You can use the New-Timespan cmdlet in the Where clause, it returns the time difference between 2 DateTime objects.

  An example of this cmdley

  New-TimeSpan-start (Get-Date). AddDays(-7)-end (Get-Date). Select days - ExpandProperty

  In your case, you could do

  Where {(New Timespan-démarrer ([DateTime] $_.))} CreatedOn) - end $start7). {7 days - gt}

  But beware of negative numbers.

• How can I search all subjects in my guide? and if this is not possible, how do I get books have not not subjects with the same name?

  How can I search all subjects in my guide? and if this is not possible, how do I get books have not not subjects with the same name?

  "People need be able to find these without having to look inside each book TOC.

  Sorry, but I'm not a big fan or user of this sensitive arrangement "New kid on the block. Therefore, it may be that I am simply misunderstanding because I do not regularly use it. Of what you say, it seems to me that if you (or more precisely your users) are not able to click on the right side, where he says 'Getting Started' or 'List of Email Campaign' and see these topics open and view the content with search terms highlighted?

  Regarding the "bookmarks", those that are normally visible by the user and will be not viewable unless the name of the bookmark appears also as text within the topic. Although, if the two are different, you could probably get there by adding the name of the bookmark as a keyword search in the properties of the section.

  

  In any case, I feel that at this point, I can just be frustrating you and you may need someone else to try to help that probably better understand the issue.

  Sorry, I was not able to help.

  See you soon... Rick

• Is - is no longer offers a basic remuneration for it and it's yours for as long as you want with no updates of Adobe?  All programs are now a subscription?  Is it really not possible more to pay only once and that the program without updates until what yo

  Is - is no longer offers a basic remuneration for it and it's yours for as long as you want with no updates of Adobe?  All programs are now a subscription?  Is it really not possible more to pay only once and the program without updates until you decide to improve?

  You can buy cs6, Creative Suite 6

• Computer memory virtual is increased from 6 to 8 GB and now vm fails to power on with the error massage not enough resources to meet the HA failover, attached screenshot

  Computer memory virtual is increased from 6 to 8 GB and now vm fails to power on with the error massage not enough resources to meet the HA failover, attached screenshot

  The message is usually due to the Admission HA and reservations control configuration memory set on one or more virtual machines. With the default configuration HA calculates the sizes of slot based on the memory and CPU. Any reserve on a virtual machine could increase the size of the slot and lead to fewer available seats. What you can do is either to reduce (or eliminate) reservations about the VM (s) or set admission control to a percentage rather than the host failures tolerated.

  André