virtual XP mode does not start

Similar Questions

• VMWare Virtual Center Server does not start after Windows Update

  Help!  I'm under vCenter 5.1 on Windows 2008 R2 with SQL Server 2008 R2 Standard.  I have applied the latest updates for Windows (critical only) as it applied Service Pack 3 to SQL 2008 R2.

  Now the vCenter Service does not start.  It generates error 7024 in the Windows system log:

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  and error 1000 in the Windows application log:

  Could not initialize the VMware VirtualCenter. Closing...

  PS - I confirmed that the SQL instance is running.

  Absolutely nothing has been done except the Windows and SQL updates.  Everything worked fine until this point.  Ko an article deals with a "space" condition, but there are a lot of available space.

  I have attached the file vpxd.log, he created.

  Clues?

  Thank you.

  OK it turns out that the WWW service is interfering with vCenter Service on Port 80.  The thing is that the WWW service has been set to manual start.  Somehow during the upgrade Windows or SQL, one of them decided to turn auto-start. After the reboot, the conflict occurred.  Once I put the WWW back service to manual start the vCenter service started OK.

• Firefox crashes on startup in normal mode and safe mode does not start reset mode

  using 26.0 FF
  using windows 7 Home premium v 6.1 (last)

  My problems started after the loading of 26.0 FF. If I start FF in normal mode it crashes. Same thing when I boot in safe mode. I close FF (while it's hanging) by clicking on the X in the upper right.

  When I launch FF in safe mode and click Reset FF, it crashes without FF never appear. I have to stop it using the Task Manager. Off mode reset, I can launch FF in normal mode and everything works fine. However, stopping FF does not close it. I have to use the task of the Manager close. Then I'm at square one when you try to start FF, i.e. reset firefox, crashes, Task Manager, stop, then start FF.

  When FF is on, I can open a new window of FF. All my addons are up-to-date. I reinstalled FF 26.0, three or four times.

  I deleted the cache and cookies.

  I scanned for viruses and rootkits etc. with microsoft security essentials and spybot.

  I've been a happy user of FF for over ten years and have never had a problem like this. Any help will be appreciated.

  Thank you!

  I think that I fixed it, it gives a trial because he has started to do this on my two PCs.

  Go to Options > general tab > start switch / "Show a blank page" and the charges of all good. What I used was 'Show my home page' which is the default page of Firefox with the Logo of Fox and history, Favorites and other options at the bottom.

• Home Vista Safe Mode does not start correctly. What should I do about it?

  Hi, I was struck by an unknown number of bugs. I don't know how.  I ran my anti-virus software and could not find bugs. I tried to start in safe mode to run antivirus and Vista programs won't let me access Mode without failure. I turn on the computer, press F8 repeatedly until my options appear. I tried the Safe Mode and safe mode with networking Mode. In both conditions, Safe Mode begins to start. Crosses of approximately 42 drivers and comes to the black screen with the oversized arrow, then the computer restarts.  What can I do?  I can't access Safe Mode!

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• The Explorer does not start, the Task Manager does not start, safe mode does not start. Wat to do?

  I have recently been diagnosed with some sort of spyware / trojan in Avira and, apparently, he had removed. Apparently NOT.

  Yesterday my laptop crashed and explorer.exe would not load at startup. The screen is all black with just the cursor. Windows Key + R is not raise Run and Alt + Ctrl + Del to appear the option lock and stop... but no task manager.

  Safe mode has the same problem. I tried the option restore also, but all the restore points has mysteriously disappeared.

  I wonder if there is no solution without a ridiculous amount of data backup and restoration of the entire system. Thanks in advance

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Low battery or endurance mode does not start

  I use Xperia Z3 D6653 on Android 5.1.1 has a low battery / Stamina mode to start automatically at a set level battery. For example. 15%, 20%. My problem is, none of these batteries start to save me modes automatically to the value of drum set. I have not rooted the phone or not using any battery of third-party apps associates.

  He did not even in Safe Mode. So I reset the phone and now everythink works fine. Uliwooly thank you for your kind support.

• Managing servers with virtual IPs / hostnames does not start

  Hi all
  
  I installed a cluster of OSB in load balancing and a load-balanced SOA (10.3.6) on two separate servers.
  
  -Server Admin SOA (runs on the server #1).
  -Server Admin OSB (runs on the server #2)
  
  I am using virtual hostnames for my managed servers of SOA and OSB, as follows:
  
  -Server of OSB managed #1: OSBHOST1VHN - ip: xxx.xxx.xxx.xxx (runs on the server #1)
  -Server of OSB managed #2: OSBHOST2VHN - ip: .yyy (runs on the server #2)
  
  -Server SOA managed #1: SOAHOST1VHN - ip: www.www.www.www (runs on the server #1)
  -Server SOA managed #2: SOAHOST2VHN - ip: zzz.zzz.zzz.zzz (runs on the server #2)
  
  -The BAM server managed #1: BAMHOST1VHN - ip: nnn.nnn.nnn.nnn (runs on the server #1)
  -The BAM server managed #2: ip: zzz.zzz.zzz.zzz - no name virtual IP here (runs on the server #2)
  
  I was able to start/stop the admin server managed nodes on each server so far Manager.
  Everything works great until we decided to stop the machines to add more memory.
  After the reboot, the servers admin started but not servers managed.
  Well, all the managed servers with vIPs failed, but the BAM #2 server started without any problems.
  
  For other servers managed, I get the following errors in the log files.
  
  # < 20 nov. 2012 15: 56 GMT > < error > < statistical ALSB Manager > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 9583013bf964d764:32a0a378:13b1e86ef73 :-8000-0000000000000010 > < 1353426960019 > < BEA-473003 > < server of ' Agra delegation not available. Cannot get the aggregator distance
  java.rmi.UnknownHostException: could not find URL for the server 'ms_prd_osb1 '.
  at weblogic.protocol.URLManager.findURL(URLManager.java:145)
  at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.getInitialContext(WlsRemoteServerImpl.java:120)
  at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.lookupJNDI(WlsRemoteServerImpl.java:76)
  at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.getRemoteAggregator(ALSBStatisticsManager.java:291)
  to com.bea.wli.monitoring.statistics.ALSBStatisticsManager.access$ 000 (ALSBStatisticsManager.java:38)
  to com.bea.wli.monitoring.statistics.ALSBStatisticsManager$ RemoteAggregatorProxy.send (ALSBStatisticsManager.java:55)
  at com.bea.wli.monitoring.statistics.collection.Collector.sendRawSnaphotToAggregator(Collector.java:284)
  at com.bea.wli.monitoring.statistics.collection.Collector.doCheckpoint(Collector.java:243)
  to com.bea.wli.monitoring.statistics.collection.Collector$ CheckpointThread.doWork (Collector.java:68)
  at com.bea.wli.monitoring.utils.Schedulable.timerExpired(Schedulable.java:68)
  to com.bea.wli.timer.ClusterTimerImpl$ InternalTimerListener.timerExpired (ClusterTimerImpl.java:254)
  at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:531)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  
  # < 20 nov. 2012 15: 56 GMT > < emergency > < security > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000015 > < 1353426963376 > < BEA-090087 > < bind to the configured Admin port the server failed. The port may already be in use by another process. >
  # < 20 nov. 2012 15: 56 GMT > < error > < Server > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < DynamicListenThread [Default] > < < WLS Kernel > > <>< 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000016 > < 1353426963376 > < BEA-002606 > * < cannot create a server socket to listen on the channel "Default". The 172.17.241.93 address may be incorrect, or another process is using port 7000: exception java.net.BindException: cannot assign requested address. > # < 20 nov. 2012 15: 56 GMT > < critical > < WebLogicServer > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < < > main > < < WLS Kernel > > < 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000012 > < 1353426963377 > < BEA-000362 > < server failed. Reason: The server doesn't have to bind to any port can be used. See the log for details message. > # < 20 nov. 2012 15: 56 GMT > < error > < WebLogicServer > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < < > main > < < WLS Kernel > > < 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000012 > < 1353426963387 > < BEA-000383 > < is not an essential service. The server will shut down >
  
  I tried to ping my vHOSTS:

  ping OSBHOST2VHN

  I managed to fix my VIP, so I guess they work properly.
  I checked the etc/hosts, and everything is set up correctly.
  I also checked config.xml (which I have not modified) and everything seems correctly (host, servers, IP, ports,...).
  
  The only one that has changed since the rebooted server is the setDomainEnv.sh in which I modified Xms and Xms values to increase the heap size.
  I only changed it on a single server to check if the settings we correctly applied.
  
  Can someone help me with this?
  
  Edited by: user13619168 Nov. 21. 2012 08:09
  
  Edited by: user13619168 Nov. 21. 2012 08:10
  
  Edited by: user13619168 Nov. 21. 2012 08:16
  
  Edited by: user13619168 Nov. 21. 2012 08:17

  seems you use duplicate port numbers, would you please change the port and make sure that it is not in use by any other process. hope this will help.

  -Negi Mukesh
  http://weblogicserveradministration.blogspot.in

• MY Sony VAIO VPCEB13FX recovery mode does not start and ask the way to recover mode

  Please help what is the path for VPCEB13FX for the recovery mode.

  Hi rchoksi6,

  The recovery partition cannot be open/covered and is visible in disk management. By default, the recovery media should not ask the way since its preset. It is possible that the recovery partition can be damaged or is (missing a file (s).

• My B117 mode does not start

  Hello
  I just bought the TravelMate B117. The Intel Pentium N3700 should lead to a speed of 1, 6 GHz and with mode 2, 4 GHz.
  After a few tests and benchmarks, I saw that the speed is never greater than 1, 6 GHz.
  Turbo Boost should be enabled by default, but it's not. I couldn't find all the parameters in the BIOS/UEFI.
  No reference to what do I do?

  Fixed it by updating the BIOS. Speed goes up to 2.4 GHz!

• I have a Toshiba with vista 64-bit. Stuck on welcome screen and safe mode does not start loading windows files pass,

  My phone threw sleep for a few months because I had no internet. I just got the internet hooked upward and started the computer, worked fine until about 10 mins in., I got a blue screen crash. tried to restart and now when I click on my user account he just says welcome and very much in charge. halp please! Ive been working on this problem for 8 hours now and its getting a bit frustrating I sem find lots of ppl with the same problem or similar but not much help answers.

  Hello

   
  I suggest that contact your computer manufacturer to get the disc to repair the system to solve the problem.

• MacBook Pro does not start safe mode or recovery mode without start up

  I use my MacBook Pro almost daily for several months now, and all of a sudden I stopped and start it up to a kernel panic (so it seems) who never lets me start normally, safe mode is a nothing helps. Recovery mode does not start, and when I try to use an external drive usb in the selection of drive it will appear. I don't know what to do more and I'm stuck. I'm not able to get in all the menus, so all I have is these pictures of panic before it restarts. Post picture soon submit iPhone photo.

  

• Firefox does not start after the computer restarts

  Install Firefox, works great. Restart the computer, Firefox does not start, or finally when it tries to start the script errors occur. If I reinstall Firefox after restart of a computer, it works fine, once again when the computer is stopped at the next startup it is, will not be able to use Firefox. Firefox does not start in Firefox Safe mode, does not start in windows safe mode. Do not add now, nothing has been added, just the Firefox installer played complete the system restore on the computer, same problem. Windows 7 Pro. Remove Firefox from windows control panel, restart your computer, install firefox, will take place. shut down the computer, put on the computer, firefox does not start, or crashes. I am exploring now Web interface.

  I reinstalled Firefox, so it will run in order to perform the steps below.

  Here is the answer which took care of the problem,

  http://KB.mozillazine.org/Browser_will_not_start_up#Problematic_plugin_prevents_browser_from_starting

  "Site Web TrueSuite Log On" plugin (AuthenTec), is the question.

• vCenter VC service does not start

  vSphere 4.1 running on WIN2K8 R2 ENT 64 bit.

  The center of the vCenter Server virtual server service does not start.

  I migrated just box 32-bit physical in a 64-bit vm and the following documentation for VMware, I migrated to the database successfully last week. Everything seemed to work ok after. However, when I arrived this morning, I noticed that I can not connect, so I opened vSphere client on the host computer and consoled in. I noticed that the service wasn't working, so I tried to start it and I received the following message:

  Event ID 7024 with the following in the system log:

  "The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the file specified."

  I restarted the VM server, but neither VC service or Web services Mgmt Services were running. I started VC temporarily, but he stopped.

  I checked the system event log and found this error event:

  "The service of Server VMware VirtualCenter ended unexpectedly. It has done this 1 time.  The following corrective action will be taken in 300000 milliseconds: restart the service. »

  After digging in the application log, I seem to have the found guilty (EVENT ID 9002):

  "For the 'VIM_VCDB' database transaction log is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases"

  I know this has something to do with SQL, but there is no SQL Studio Mgt installed on this box.

  How can I there to remedy?

  Thank you

  Alex

  Hello.

  Check out http://www.vladan.fr/how-to-fix-%E2%80%9Ctransaction-log-for-database-%E2%80%98vim_vcdb%E2%80%99-is-full%E2%80%9D-errors/

  Good luck!

• Machines Windows does not start with 2 virtual disks different on 2 different

  Hello

  With the help of esx.3.5.0 update 3

  I have a problem where if I have a new VM to win 7 or Win 2008 r2 with or without vmtools.

  If I reboot it up to 10 times without having to install anything, whether he'll join the black windows loading screen, then restart and then restart and try to start in safe mode, it still does not start.  the machine rendering it useless.

  The single element only on these virtual machines is as follows.

  Windows machines have 2 different virtual disks 1 on a lun, VMFS (vmfs version 3.21 c:) and a RDM VMFS (d :))

  3 questions

  Is it a problem to have 2 different discs with 2 different stores file types?

  Would this questions we see above?

  Also, I thought that you might not? VMotion/clone? a virtual machine if she drives in 2 different places?

  I tested and I can vmotion live VM with records stored on 2 different LUN.

  Hello.

  With the help of esx.3.5.0 update 3

  I have a problem where if I have a new VM to win 7 or Win 2008 r2 with or without vmtools.

  If I reboot it up to 10 times without having to install anything, whether he'll join the black screen windows loading and then restart and then restart and try to start to > safe mode, it will not even start.  the machine rendering it useless.

  Windows 7 and 2008 R2 are not supported in this version.  5 update brings support for these two operating systems.  Go to U5, maybe it's the solution.

  3 questions

  Is it a problem to have 2 different discs with 2 different stores file types?

  Laughing out loud

  Would this questions we see above?

  It is unlikely.

  Also, I thought that you might not? VMotion/clone? a virtual machine if she drives in 2 different places?

  I tested and I can vmotion live VM with records stored on 2 different LUN.

  VMotion requires shared storage.  Local storage would be a problem if you tried to change hosts.

  also would it be a problem if 1 store was running 3.2.1 vmfs and other store runs 3.31 and a v on each disc is used for the VM 1?

  Lol this is explained in KB 1005325.

  Good luck!

• After that restart of firefox does not start. is running in the Task Manager, but won't pop up. Reset safe mode and uninstall/reinstall won't help. OK so no reset.

  Win7 Pro. has worked ok firefox. but lately with 25 and 26 now, firefox does not start. I see that firefox is running in the Task Manager. but it will not just appear.
  If I still download and install it, it runs, but every time I restarted the system, it just does not work yet.
  Reset try:, safe mode, uninstall & reinstall, new/clean profile none of these work.