Virtual XP mode under WIN7

Similar Questions

• the virtual copies exported under Win7 seem to lose changes

  When I export virtual copies in LR5, everything seems fine.  The library grid displays the new copies of the original image with the various changes I did to develop.  This also applies to the folder view brief LR5 appears at the end of the export.  But, when I later discovered the same folder as the computer Win7 utility, or any other editor, these files all the same appear as the original!  No obvious changes.  So it turns out I missed a step in the export process to 'fix' the changes in the virtual copies to the new files?

  
  Kelly Cook

  I have exported virtual copies as a JPG in the past and did not have this problem

  Are you sure when you did export, you have selected the type of file or JPG and not 'Original '?

• Cannot Get Serial Port to operate in virtual XP Mode of Windows (operating system is Windows 7 Prof SP1)

  I have a data record meter Extech quite expensive. The software so that it runs only on a PC running XP or by loading the software in virtual XP mode on a computer with Win7.

  The software works OK in virtual XP mode, and I can open previously saved data files. But with the operation of the software, I can not connect to the counter with his serial cable.

  I checked the status of the serial port in the Device Manager on this computer; time in the virtual XP and Win7. In both cases, it shows a COM1 and COM2 works satisfactorily. The only "yellow? s"in Device Manager are"VIRTUAL PC INTEGRATION DEVICE. " The connector Series 9 pins on the computer is labeled as COM1.

  The meter connects smoothly to multiple other XP computers. Flow baud rate 9600 and other port settings are set by the software.

  Hello

  Check out this article Configure a port for a virtual machine COM Microsoft to resolve this issue.

• Get a USB device is to identify the virtual XP mode on Windows 7

  I tried to get a device from logitech, G25 steering wheel, to be identified in virtual XP mode running windows 7. However the device does not appear on the screen of the top USB devices tab or in my computer. The unit works perfectly on windows 7. But I need it to be run under XP for a project. any help? Thank you very much

  Hi WorkingRightNow,

  As the device is not detected in virtual XP mode, I suggest you write the topic in TechNet forum to improve assistance: http://social.technet.microsoft.com/Forums/en-us/w7itprovirt/threads

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• network of virtual xp mode problem

  I use virtual XP mode on a windows 7 Dell.  No problem to see the other computers on the win7 host via a wired network, NS, but when I try to access your network in the virtual XP mode I'm not always able to do.  I get an error that the server is not accessible. "you are not allowed to use this network resource... Contact the administrator of this server to find out if you have access permissions... »

  Thank you!

  David

  Hello

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP. Note:
  Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet
  
  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• LV2010 32-bit under Win7 64 bit - SCC provider not found

  Is there a work around to use a provider of Source control with LV2010 32-bit under Win7 64-bit?

  It seems that the VI 'Raspberry find all Providers.vi' does not work with the OS 64-bit due to registry access restrictions.

  The Key.vi of open registry is not able to analyse below HKey SOFTWARE but the full path is SOFTWARE\SourceCodeControlProvider\InstalledSCCProviders.

  Best regards

  Christian

  By reading this thread http://forums.ni.com/t5/LabVIEW/LabVIEW-32-bit-and-Vista-64-Registry-Read/m-p/978676#M438513 , I was able to get a work around.

  I replaced the version registry key VI opened by the ".vi ACI - WinAPI - open registry key (WOW64 support)" within raspberry NI find all the Providers.vi and now I can choose the SCC provider installed via the LabVIEW IDE-tools >-> Source code control-> configure source control.

• How can I reinstall (lost) Windows Virtual XP Mode in Windows 7 using the previous or your virtual hard disks?

  I recently had to reinstall Windows 7 Pro X 64 to address an obscure problem. In doing so, I lost my virtual XP Mode of Windows installation. But I still have the virtual hard drive related.

  1. Can I reinstall the VXP in order to use the old hard drive virtual?
  2. If I reinstall VXP using the VHD file, will be what I have already installed there would still be available?

  Hello

  I am happy to know that the problem has been resolved. Please do not hesitate to get back to us if the problem re occurs.

  Kapil Purohit - Microsoft Support

• How to rename tasks scheduled under win7?

  I would like to know how to rename tasks scheduled under win7

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  It can't be renamed directly, but if you export the task at any place, then re-import, it can be renamed during the import process.

  Then just delete the old task.

• Use the ROW box in virtual compatibility mode.

  Hi all

  Can anyone tell me please what is the case of Virtual Compatibility Mode RDM?

  I know, it supports instant of vsphere. other use cases?

  Thank you best regards n

  One of the use cases may be to use clusters in a box (host).

  If you need to create clusters between several boxes, you can use physical RDM mode.

• 2.04 Ubuntu comments on VMware Workstation 9 under Win7 can't see ext4 USB drive

  Comments from 2.04 Ubuntu on VMware Workstation 9 under Win7: on computer A trivially, I connected to an out-of-the-box 64 GB USB drive formatted for VFAT on Ubuntu in a VM. I re-init'ed the player for ext4 (mkfs.ext4), mounted, drop a bunch of stuff on him (which took awhile), he dismounted and walked away. The next day, identically configured computer B, I inserted the USB key. Natch, Win7 may not go up because it does not ext4. But Ubuntu don't see either, so I can't be installed. Do not see under removable devices, no small icon bottom left of the screen of VMware, nothing in the settings menus or properties, etc. I think it's just me being a noob to VMware, but it seems that Ubuntu under VMware Workstation 9 cannot see the drive unless Win7 can go up. Seems unlikely. KB searching, Googling, etc. produce many unrelated things. Ideas? AdvTHANKSance.

  Here is the final answer: works great on an earlier version of VMware Workstation 9 on one of the Windows 7 of my client machines, it didn't work on my Windows 7 computer. I upgraded to VMware Workstation 10 on my Windows 7 computer, and now it works perfectly. If I call you this a bug in this version later 9 which was set at 10. Could also be had I simply uninstalled 9 and reinstalled which would have fixed it too. But I'll never know.

• Convert a physical compatibility mode raw device mapping to a virtual compatibility mode raw device mapping

  Hello forum,.

  I have a virtual machine that got a RDM in physical Compatibility Mode, so I can't create snapshots of this disc.

  Is there a way to convert this ROW to a virtual Compatibility Mode to allow the creation of the snapshot?

  The client must create a snapshot tomorrow in order to update the database. In case of failure it would be easy to write the snapshot again.

  Hope you understand my problem.

  concerning

  Dennis

  Assuming that the RDM is attached to a single virtual computer, see http://kb.vmware.com/kb/1006599

  Conversely, virtual and physical memory ROW, make sure you have deleted (Clerk) the snapshot before you remove the disk devices to the virtual machine, otherwise you will lose changed data!

  André

• Extend the ROW when the disk is in virtual compatibility mode.

  Hello everyone, thank you very much for any help that you need to make.

  I am trying to extend a volume. The volume is a RDM. It is configured in virtual Compatibility Mode.

  I am able to extend the Lun on the SAN. When I do a new analysis in Virtual Center I see large volume. But when I go into Windows OS disk manager and rescan the disks I don't see extended volumes.

  I tried using the physical compatibility mode and it works.

  How can I go on the extension of this volume? Is it possible to do while the server is?

  Jeff

  There is no way I know to extend the RDM virt without virtual machine being down for a certain period of time.

  The advantage of virtual compatibility mode is tha ROW can participate in snapshots and behaves more like a vmdk. There are advantages and disadvantages of each type. See

  http://pubs.VMware.com/vi35/server_config/wwhelp/wwhimpl/common/html/wwhelp.htm?context=server_config&file=sc_adv_storage.12.6.html

  http://vmzare.WordPress.com/2007/02/19/VMware-raw-device-mappingrdm/

• A WIN7 in virtual XP mode can join a network working group?

  On a network of workstations XP working group and a Win 2000 Server, when I go into virtual XP on a new Win7 Professional workstation, I can not find the server on the network. In fact, I see no other workstations.

  The Win7 machine is on the network, just the virtual xp seems not to join. Any suggestions?

  Go to the settings for the XP mode and make sure it uses the real material network adapter and not the shared map.

• Hello, my turbo pascal programs more parpadean under win7 even in mode compatible but worked well under Xp

  programs 'back' in turbo pascal that much use the display functions. Error message: "this system does not support mode full screen. Choose 'Close' to terminate the application. »

  Hello

  Please select your language from the link at the bottom of the page to the left to post your question in the language of your choice. The forum in which you've posted is for English only.  If you can't find the desired below language, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• Legality of the XP Mode under VMWare

  Hello

  I have an old application that can be installed on Windows XP. I bought a new PC with Windows 7 Ultimate installed. If I managed to install XP Mode and run it with Virtual PC. Unfortunately, the application uses the parallel port (LPT1) with a hardware activation key. I understand that the parallel ports are not functional under Virtual PC so I decided to import XP Mode in VMWare Player Standalone converter. I had a problem of activation at the start of the imported virtual machine.
  I followed the steps described in the following note on VMWare forum and my interpretation is that the solution is legal.
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2014936
  I also read the next note, but the answer is not clear enough.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/is-it-OK-to-run-XP-mode-in-VirtualBox-VMware-or/07c2d134-B288-4a00-8bbd-1603c4534075
  I wonder if this is legal in all. I need a clear answer so I can ask the customer to buy a license or not. The virtual machine will still run on the original PC I just bought and the Virtual PC and XP Mode will always be installed on the PC but not executed.
  Thank you

  Hi Patrick

  I would recommend that ask you this question on the forums of Windows Virtualization. Experts it should be able to answer.

  Windows Virtual PC and XP Mode Forum:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Concerning