Ignorance of the firmware

Similar Questions

• I upgraded the firmware Sansa Clip & now I don't see the files I had previously in

  Hi guys, this is my problem: I have a sansa clip v2, it worked fine until yesterday, when I updated the firmware with sansa updater; the upgrade went smoothly, but now my windows xp sp3 detects the drive because it was a normal penstick/external hd and I cannot see the files I already had in it: I can still listen to their - players works as usual - but, as I don't see them, I can't delete them! I tried the "hidden and system files" in folder options, but it did not help. I think that after the upgrade of the internal structure of the file has changed a bit, now it is: sound, music, audio books, podcasts, record, WMPinfo.xml, MTABLE. SYS, RES_INFO. SYS, SYS_CONF. SYS, version.sdk. I try to put a few new files in the folder "music" and it works perfectly, they appear in the player, so the problem is only with the 'old'; in fact, I would not delete them mind these files if it is not necessary, because I have them on my hard drive).

  I hope someone can help me, thank you very much! (and please excuse my bad spelling & grammar, I'm Italian!  :-))

  1. pick up your player Sansa Clip - the physical drive you bought.

  2. activate.

  3. press the small 'home' button, the small button on the front of the item located at the top right of the Ferris wheel - it's the small button with the little house printed on it.

  4. press on the lower part of the wheel (at 06:00 position) until the screen shows the settings.

  5. press once on the right side of the wheel (at 03:00 position) to access settings options.

  6. press on the lower part of the wheel (at 06:00 position) until the display shows USB mode.

  7. press the right side of the wheel (at 03:00 position) once to enter USB mode options.

  8. tap up or down the Ferris wheel (at 12 and 06:00 positions) and select the USB setting menu is currently not checked (I think that this will be the PSG; ignore the setting "Auto", for the reasons I stated above), then select it by pressing the right side of the wheel (at 03:00 position).

  9. you have now set your video mode MTP USB drive.  Press the small home button twice to return to the regular game mode.

  And that's all.  Now when you connect your player to Clip on your computer, your files should appear on your computer.  If they don't, repeat the above, but set the USB to the MSC mode.

  I hope this helps.

  PS As I said earlier, the USB modes, the MSC mode (compared to the MTP mode) is more universal and will work on multiple computers.  If you use a video player on other computers, you can set your video player in MSC mode, to ensure that it will connect to other computers.  If this is the case and if your video player has been set to MTP mode so far, before changing the setting of mode USB mode MSC, to be able to see all files in the reader of your video on your computer, first copy the files from the drive of your music back to your computer delete them out of your video player, set the Clip Player USB Service mode weather of the Canada (see above) and then copy the files to your video player.  This ensures that you can see all the files of your video player when it is connected to your computer.

• The firmware download

  I have a dimension 4700 with a NEC DVD +-RW ND - 3530 a and have not been able to burn a CD of music for the last 6 try (even if I was able to burn 5 in the past and can burn to a CD - RW data).  I tried to disable my screensaver, purchase new package of CD - R Maxell made in the Japan, close all programs, using the 'Burn CD & DVD with RecordNow!' program that was preinstalled on my desk... but nothing is.  So I just looked to see if there might be an update I needed and found one on the site of Dell, so I clicked "Download" for the firmware for my CD/DVD.  A window that now emerged the 'Zipped' in a folder sitting watch.  Should I now click on "extract all files"?  If so, then what?  Please excuse my ignorance, I've never done this before.  Any help is greatly appreciated.  Thank you.

  P. S.

  It was listed under the "Advanced" button on the error message that I receive all trying to burn a music CD:

  Sense: 03 ASC: ASCQ 0C: 00 (command 2A)

  -------------------------------------------------------

  PX.dll: 3.4.45.500

  PxAFS.DLL: 3.4.45.500

  pxdrv.dll: 1.2.1.0

  PxMas.dll: 3.4.45.500

  PxSFS.DLL: 3.4.45.500

  PxWave.dll: 3.4.45.500

  pxwma.dll: 1.0.0.3

  
  

• Questions of CMC M1000e redundancy since the upgrade of the Firmware 5.00

  Hello

  We see a lot of the following alerts

  "Chassis management controller (CMC) redundancy is lost '.

  and 30 seconds later

  "The chassis management controller (CMC)" is redundant".

  on our fleet (47) of the chassis, since upgrading the firmware to 5.00.

  It happens every day on some chassis, which, before the update, maybe obtained a such report once a month, if that.

  Everyone knows about this problem?

  THX,

  John Bradshaw

  Bradje1,

  I'm doing research on the issue for you, and it seems that there is another way out in the future to replace 5.0. In this time, but if you want you can either restore the CMC firmware to the previous version, or ignore the error up to the new CMC update is released. Sorry for the inconvenience.

  Let me know if that answers your question.

• An error occurred during the update the firmware.

  Hello, I have an orange light flashes on my Airport Extreme device indicating that a firmware update is available. However when I tried to update I had the following error every time: "year error occurred while updated the firmware-6, 721. What should I do?

  Thank you in advance for your help! ... soon a

  If this is not the case, already, connect your iMac to AirPort Extreme with an Ethernet cable. On the iMac, make sure that Ethernet is enabled and disabled WiFi (or next to). Then try to use the utility AirPort again try the update of the firmware.

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• TimeCapsule downgrades WiFi 2.4 GHz after applying the firmware update v7.6.7

  After applying the firmware update v7.6.7 free WiFi to TimeCapsule is now 2.4 Ghz instead of 5 Ghz.

  It was the update of the firmware with certainty that has made this... no doubt about it:

  • My mouse bluetooth interference notice when my MacBook is connected to WiFi 2.4 Ghz;
  • Before the update, everything is OK
  • After updating, my mouse mouse start jittering
  • < alt-click > WiFi icon in the menu bar confirms: the connection is now 2.4 Ghz

  Restart to e TM Mo doesn't change anything.

  In the TC WiFI options tried to put another name to the network successfully, but only 5 GHz can not connect to it: timeout error every time.

  Tried the hard reset of TC and reconfigure the WiFi... the same result, but with a difference:

  • Setting an SSID separated for 5 GHz connection (in the WiFi options) has now created a network I can access.
  • However, this is not the best solution... I don't want 2 SSID.

  It is not the first time Apple breaks things with updates... and I see people move away from Apple to this kind of situations.

  I also had bad experiences with OS updates lately and postpone the as much as possible.

  The problem is that I can't go back... or can I?

  Any help is welcome.

  THX

  The problem is that I can't go back... or can I?

  Of course, you can, but it may or may not help.

  Open AirPort Utility

  Click on the image of the AirPort base station

  Hold down the option key on your Mac while you click on the version number of the firmware

  A drop down menu appears

  Choose the version of the firmware you want to use

• The update of the firmware bricked just my time capsule.

  I followed the prompt to update the firmware today and I got a 'did not finish' message type. (I don't remember what it was because I just clicked on past)

  'The airport' (which is my Time Capsule) is now Undiscoverable. I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.

  Now, I'm stuck in a dystopian nightmare of the 1980s with all the promises of technology and yet none of its features.

  Help!  (I write from my phone. A device that I've recovered from the future)

  I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.

  If you Hard Reset the TC, it is normal that AirPort Utility cannot find the TC... given that AirPort utility displays only devices of the airport that have already been configured.  The TC is not configured, so it's a Station of Base AirPort "nine" with the default settings.

  Start over and set up the TC to help "Assistant" Installation of Apple on your Mac or your iPhone / iPad.  After the back if you need some advice on this.

• MacBook pro locked with a password of the firmware, Help!

  I have a macbook pro, end 2011, which is locked with a password of the firmware, and I do not know. Are their any of you know how powerful hardware hacks, and no one knows a way of hacking the firmware lock? I tried to avoide paying someone to fix my machine and unlock the firmware, then I tried a lot of material tweeks likely to pass the lock of the firmware and unlock my computer. Please help and thanks in advance for all this you find to do it yourself Tech who would rather their firmware password reset themselves. Thank you.

  See this article:

  http://osxdaily.com/2015/01/28/forgot-Mac-firmware-password-what-now/

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• I need the firmware for the Toshiba excited AT7 B618

  Hello

  The Tablet keeps showing a message

  Unfortunately, it stopped secret lock

  Ok

  When I press OK it comes again.

  I fact (power + key) factory reset, but it does not solve the problem.

  I installed antivirus it found 7 threats, but he did not remove it because it becomes the vendor applications. Viruses that are present in the backup.

  I need the firmware image to excite at7 - B? Please reply with the download link.
  
  Device name: AT7-B618
  Unit number: PDA0HV-002004AR
  Product group: TOSHIBA

  Best regards
  Department of health Shair
  
  Thank you
  

  I have the same problem, why not support a large company like toshiba product, why I can not download a firmware for AT7-B618?

  Please I need this firmware
  Best regards

• How can I update the firmwar in the tv 48T5445DG?

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T544DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder update by Sam currend?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T5445DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder currend update satellite (Astra / Hotbird)?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Thanks for your help

• Problem with updating the firmware on 40TL838G

  Hello

  I am very happy owner of Toshiba 40TL838 screen (G).
  Recently, I tried to update the firmware on it.
  Next steps in the user manual I tried to do the update of the network. "No new updates available" poped upward. I goggled solutions and came across a manual update of the USB.

  I downloaded the firmware recent Telefilm, coppied to usb (4 GB, formatted FAT32).
  Following the online instructions I have unplluged TV power.
  Plugged in USB. Connected TV to the power and he lit. And nothing happened.

  After 20-30 sec info abut being plugged usb pop uped question I wish to put on the Media Player.

  Firmware: 6.1.0M.1
  MBoot: 00480288
  MFC: 240226

  Any ideas how to proceed with this case.

  Concerning
  SLim

  Hello

  The firmware can be downloaded and updated via the network.
  But as far as I know you need to change the drive media or software update settings can not be started.
  Media Player-> USB media player-> installation
  Then press left or right, and select THE
  Now we turn on the TV
  Insert the USB key containing the firmware and after inserting the USB firmware update information appears on the screen.
  Then choose YES

• Where to download the firmware for Toshiba 19BL502B TV

  Hello

  Is there a place where I can download the firmware for my Toshiba 19BL502B TV, so that I can install on a USB key and update?

  I've already asked about the firmware that supports Xvid in the forum "New TV model Discussion", but had no luck. As I said in my previous post, the online manual for the machine indicates she has support Xvid, while my paper manual is that the part removed.

  My previous post was:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=134

  And here you see a photo with a comparison of the two manuals.
  I seek to change the firmware of the TV so that it supports Xvid, whether a new firware update or an older one.

  Thank you

  Frank.

  Hello

  Have a look here:
  http://www.DL.Toshiba.com/dly/index.jsp?region=GB&lang=en

  This is the place where you can download the firmware for Toshiba TVs

• Update the firmware, Toshiba TL 838

  I have problems with my TL838, I heard you can update the Firmware and this has solved some of the problems. Where can I find these updates?

  > I have problems with my TL838.

  What problems do you exactly with the LED Toshiba TL838 TV?