Virtualization, XP Mode on Satellite M100

Similar Questions

• How to enable virtualization in the BIOS of the Satellite M100?

  In order to allow VMX for use by computer Xen does not only have a VMX capable chip, the computer must also have a BIOS that supports.

  When I am tempted to use virtualization on my Satellite M100, I get the message:
  (XEN) CPU0: VMX disabled by the BIOS.
  (XEN) VMX: failed to initialize.

  Can I use XEN virtualization on my computer?
  How to make it active in the BIOS?

  Thank you to.

  Hi mate,

  the next thing is a fact:

  even if the CPU and/or the chipset would support VT, it s absolutely impossible to operate if the BIOS does not have an option to enable/disable VT on your machine.
  Which means: no option in the BIOS - no VT

  Maybe you should check for a more recent BIOS, maybe it activates the option. Otherwise you will have no chance / no luck for this specific feature...

  Welcome them

• Blue screen of death, the Satellite M100

  Hello

  I have Satellite M100, we had problems with the blue screen of death sometimes and then it seemed fairly constant and the only way to ensure that the system is not plant was to start it in safe mode.

  The noise had also stopped working. Decided to restore the factory settings system used the disk and everything goes well until the system started in windows allows you to go through the installation program then blue screen again. The sound seems to have returned, although it is slightly crispy.
  So don't know if this is the problem or not. Unrecoverable system error crashes and also driver_irql_not_less_or_equal.

  Now cannot start in safe mode as the windows installation did not finish...

  Any ideas anyone?

  See you soon
  Simon

  Hello Simon

  If BSOD is displayed after the installation of recovery, it may be a serious physical issue.
  Try installing the OS using the recovery discs. If the problem persists I think it's time to contact the nearest Toshiba service provider.

• Satellite M100 - screen remains black after sleep/wake

  I just installed Windows Vista Ultimate on my Satellite M100 series.

  Everything works fine, but when the pc is forced into sleep/standby or it automatically goes into sleep/standby mode depending on the time of inactivity in the power settings could not be restored sleep/wake without turn off and restart.

  The blue button is orange and blinking indicating sleep/standby mode. When you press it again, it turns blue and the fan turns on. But there is no display and no response. The only option is to go to market.

  Help, please

  Hello

  What BIOS updated to the latest version?

• Satellite M100-165 cannot stop - lights up immediately

  Hi all!

  Here's my problem: whenever I have shutdown or Hibernate my Satellite M100-165, it will light within 5 seconds. Standby does not either - instead of normal going in standby mode (power LED turn orange) it shuts down completely and has the force of will to 5 seconds upwards again and freeze. The computer only lights when plugged into power alternative, with or without a network cable. Wake-on-LAN is disabled. No other event trail is accessible from the menu of the BIOS Setup.

  I tried the system restore to a date before the problem was uccured, I've updated the BIOS, uninstalled and reinstalled Toshiba Power Saver utility, set closing the lid to take no action, scanned with HijackThis and found no suspicious processes.

  The problem started shortly after I installed Motorola Phone Tools (i.e., a driver of USB modem for my mobile phone). I don't know if that could be related but uninstalled/reinstalled the software nothing works.

  Any suggestions are welcome. Thank you.

  Hello

  This very strange noise
  Have you tried to recover the operating system with the Toshiba Recovery CD?
  If this isn't the case, I recommend trying this.

• Image stretched on Samsung 16:9LCD connected to the Satellite M100 TV

  Hello

  I'm fighting for work reasons why my 40 "lcd will only show a stretched image when I connect my Satellite M100 via the vga output. Two weeks ago, I watched movies in the proper resolution and proportions to use your TV as extended desktop. Now, for some reason the image is a stretched 16:10. All drivers are up-to-date and work.

  I even updated the firmware on the tv. This problem started when I got the M100 a out of the box state using the recovery cd.

  Any help would be greatly appreciated. Thank you. Ross.

  I tried changing the settings as much as I could find with no luck. Connect the s-video cable gives me the same problem.
  If I watch TV in 4:3 mode, the image looks good.
  Samsung is a bunch of useless w ##kers and continue to give me answers auto.

  Any help or advice would be great.

• Satellite M100-164 button special support under Vista

  Hello

  I am a happy Satellite M100-164 (M100 (PSMA0) owner and I recently changed the old Windows XP mode with windows Vista (32 bit). Almost everything works perfect... except 6 multimedia keys ;) I downloaded the [last drivers "Support Button" | http://se.computers.toshiba-europe.com/innovation/download_driver_details.jsp?LNG=26&service=SE&selC fulltext = 2 & selFamily = 2 & selSeries = 161 & selProduct = 633 & selShortMod = 461 & language = 13 & selOS = 26 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & count ry = all & selectedLanguage = 13 & type = all & page = 1 & ID = 5636 6 & DISO = 26 & driverLanguage = 42] but I am obviously missing something because I can't make the buttons work :)

  The only description for divers is:

  Allows you to customize and TOSHIBA special button preset settings.

  And it's inside the packaging - http://img147.imageshack.us/my.php?image=01wk9.jpg

  When I run the exe, I get this - http://img80.imageshack.us/my.php?image=02ve5.jpg

  but when I restart, there is no change in the situation ;)
  My best guess is that I need to put the files somewhere, but currently my crystal ball does not work :)

  Any ideas? Anyone?

  Maybe the drivers and in particular tools and utilities installed in the order of poor facilities. I have installed Vista on old WXP preinstalled A100 using this command of facilities:

  Windows Vista
  TOSHIBA Value Added Package
  Chipset driver (if not available installation driver display only)
  Display driver
  Flash Media Driver
  Luxpad & Driver TouchPad Synaptics
  Realtek Audio Driver
  TOSHIBA software modem
  LAN driver
  Wireless LAN Driver
  Bluetooth stack
  Bluetooth monitor
  Fingerprint software
  TOSHIBA hardware setup
  TOSHIBA supervisor password
  TOSHIBA SD utilities
  TOSHIBA Assist
  TOSHIBA ConfigFree
  Support Button

  And so on.

  Try please install Vista to new und follow this order of installations.

• I have recently installed Windows 8 on my laptop Toshiba Satellite M100, but he was silent. How can I get this audible again

  Toshiba Satellite M100 laptop

  P.N.: PSMAOL-OC9009

  S.N.: 66201918K

  N.B.: No driver is available

  Gilles Tan

  Install the latest audio driver.  If there is no driver win 8, you can use the driver win 7 If you install in compatibility mode

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > chose the operating system

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• Satellite M100-222 - damaged internal speaker

  Hello world!
  I found that my left computer s internal speaker laptop damaged physically - torn membranes (Satellite M100-222). May be long time to use more than seven years
  I want to replace it. I need advice & replace the statement. Please:
  Is this compatible with the model M100-222? I mean, yes then, what s expert opinion?

  f592 http://www.eBay.com/ITM/Toshiba-Satellite-M100-Left-and-Right-Speaker-Set-/380817307026?PT=LH_DefaultDomain_0&Hash=item58aa7a #viTabs_0

  http://www.pchub.com/UPH/laptop/77-47512-21829/Toshiba-Satellite-m100-series-speaker-set.html

  I m not an expert but I think that you have found the right speakers.
  All of them is fixed with a screw, but you will see this when you take apart your laptop.

  Please, do it with care and if you need help let us know.

  Or maybe you know someone who can do it for you?

• Lose Satellite M100 PSMA0A time but no date.

  Hello

  I have a portable Satellite M100 (PSMA0A-0J4002), who has problems with the hold time. He lost several hours in normal operation (mains or battery power or even with no battery and only AC). It stops when the computer goes into hibernation or is disabled.

  My Windows time zones are correct and I turned off automatic updates of internet time too.
  The strange thing is that the date never changes! It's not 1980 or similar when the battery is removed. That means it's not the CMOS battery?
  I disassembled the laptop looking for the CMOS battery, but it is soldered in. Is this correct?

  I don't know if it's relevant or related, but sometimes the screen turns black after emerging from hibernation and the laptop must be turned off and when he comes back he asked something like: clear memory and reboot or restart.
  I have to choose erase the memory and restart. Very rarely, I also have the blue screen of death with count upwards saying that memory dumping (I think).

  I deleted my firewall and AV programs but still lost time.

  Anyone is able to help please?
  Is it likely to be material, battery CMOS or software?

  Thanks in anticipation!
  Lewis

  > I disassembled the laptop looking for the CMOS battery, but it is soldered in. Is this correct?
  I m not very well how it s mounted on laptop M100, but in many cases the CMOS batteries are not easy to remove it s always a job for technicians of the ASP

  The issue of the date and time may be linked to the CMOS battery
  Usually, you can charge this battery easily.
  In order to load the CMOS battery, the laptop must be connected to the power adapter and the laptop must cover more than 20hours.
  After that the CMOS battery needs to be recharged.

  But if the question seems yet, then you should check if the update of the BIOS might help if not it s a motherboard problem that should be checked by a technician of laptop!

• Satellite M100-233: stops right after the "XP" logo

  Hello
  I have a Satellite M100-233 with XP Home Edition SP3 (in Portuguese)
  When it is connected to the mains and the battery is not fully charged, sometimes the yellow light does not shine.
  Check the voltmeter application when this happens, tells me that the battery is on, the energy source is the sector, but the battery runs down.
  As I continue to use the laptop, the amount of the battery is reported as progressively less, until he tends to zero, then the laptop just turned off, as if she was not connected to the mains.
  Even if I start with the battery charged to 100%, after a couple of hours (sometimes more, sometimes less) the same thing happens.

  From an authorized dealer, they told me that it was probably a short battery shorted out.

  Get not that: * if she take the battery out of the laptop and turn it on:
  -Most of the time it turns off right after the "XP" logo.
  -It seems that this happens more often when the battery was fully charged the last time that I used it (strange! "I imagine this?)
  -Also sometimes happens after that I use the laptop for a while

  The only unusual bios message I get is "no TPM or TPM has a problem." I guess it has to do with the cryptographic protection, so I imagine that this has nothing to do with this issue.
  About two years ago, there was a problem with the battery (it ceased to be recognized as present by the laptop) which has been repaired under warranty: they told me that they had replaced the motherboard then. However, at this time there that I could continue to work normally without the battery, which is not the case now.

  I would be grateful for any advice. The most annoying is that this problem follows an irregular pattern, and the diagnosis, the dealer gave me seems hard to believe. As I use my laptop to collect data for research abroad, it is quite a risk for me to use it if I can't be sure when it will turn off on its own.

  Hello

  To be honest, I doubt that anyone here in the forum would be able to provide an exactly the answer to this question
  I think that it of almost impossible to say what's wrong without running any hardware checks.

  But to me it looks like a card mother number possibly it s power of electronic power supply which is part of the motherboard.

  What to say, maybe you need a new motherboard, but the new mobo is an expensive item, and in my opinion, you should first check if it is s to replace the motherboard or buy a laptop second hand for the same money.

• Updating BIOS for Satellite M100-150

  May indicate the reference of BIOS for Satellite M100-150 for Windows XP download, on an official website, I can not download, the reference does not work.
  I use the translator so that for the quality of the translation, I don't answer. :)

  Hello

  Here, you need to check if the Bios update is available for your model, otherwise I think that there is not another source to download here.

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  ??????. ?????? ?? ??????, ?????? ???? ?????? ? ??????. ????, ?? ???????, ?????? ??? BIOS? ???? ???????????? ? ?????? ????? ???? ????????).

  Sorry, guys I have replied in Russian, just want to help him because of the bios

• Satellite M100 (PSMA0E) - Driver for SD card reader

  Hello.

  I have a Toshiba Satellite M100 PSMA0E. I installed win XP and does not recognize the SD card reader. The site Web of Toshiba is not the pilot. How can I fix it? I'm waiting for your answers.

  Thank you

  Hello

  I checked the Web from Toshiba site and for your model M100 (PSMA0E) it is only a Vista driver available for Flash Media reader.

  But I founded a driver XP for Satellite M100 (PSMA1E) I think that models are similar, and you should try this one:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satellite M100-222: display panel dithering-> high compression like jpg

  I bought Satellite M100-222 2 days. Soon, I saw that solid colors like windows default blue or gray /many of others too / appear strangely - it seems that dirty, grainy, or as strong jpg compression.

  It is not only my opinion. As much as I know that some people who have had the same problem with the Satellite A100 series-, contributed to a bios upgrade. I have the new bios, 2.60 /25.01.2007/ new drivers for ATI x 1400 cards / but it's all the same... Graphics card seems to be ok - external monitor connected to the laptop seems good. So far, no solution.

  What to do with it, what do you think?
  Why is it like that? What's wrong?

  Hello

  I checked the issue described on Satellite M100-188 with TruBrite screen. It is visible on the white and clear areas, but on Start button while that turn off everything is OK.

  I'm really interested about service information, but I'm sure that there are no bugs and according to me, there is not much to do. I know it's much worse on a Satellite phone, and because of this, it has been updated from the BIOS.

  By the way: on my old Tecra M1 with LCD panel normal white background is also not 100% clear. But I must say that TryBrite on Qosmio laptops display is bright and much better than on M100. I really put t know what difference it there but perhaps portable multimedia expencive were simply better display.

  To see what service will say about this.

• Satellite M100-180: where can I find drivers for Win 2003 Server?

  We bought a Microsoft Windows 2003 server. I have install then on our laptop Toshiba Satellite M100-180 PSMA1E-02Q00WRU.

  With the laptop, I found Windows XP CD and Express media player recovery CD Reanimator. No disc drivers there. May be dealer lost drivers disk? If that - where can I get new CD of drivers (I am from Russia, Smolensk)

  I try to download the drivers from the web (toshiba.com.ru), but they are very large (I have a dial-up internet). Then I download driver modem (4M). Installation of the works, but no modem appear after that. And no serial port too.

  I plug the USB-serial converter and install Standart Modem (USR external). Then I have to connect to the internet and try to download the drivers with windows update. No results...

  HEEEEEEELP ME! :)

  PS Sorry for my English :)

  Hello

  : D the dealer nothing lost! The pilot tools & utilities can be created in the Windows XP operating system that came with the laptop.
  With the help of Toshiba, you will find a Protect & Fix tab and the option to create a driver disk ;)

  Further, all the XP drivers are placed on the page of the Toshiba driver. But unfortunately, nothing for Win 2003 server.
  Maybe test it works for XP drivers also on Server 2003

  To find the driver download page please go to
  http://EU.computers.Toshiba-Europe.com->-> support-> suport homepage & Downloads Download drivers