virus? or what

Similar Questions

• I can't access my restore and save. I think I have a virus. What can I do?

  I can't get my back up and restoring running to clear what I think is a virus. What can I do?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Windows 10 has been downloaded to my computer as a virus. What you want to put this on my laptop, like that, without me hitting a button.

  * Original title: Windows 10

  I was on my laptop when I get that annoying pop about 10 Windows and X is turned off. Today it pops up behind what I was watching and by chance I saw because 10 Windows has been downloaded to my computer as a virus. What you want to put this on my laptop, like that, without me hitting a button you never try and hack my laptop without my permission. If you want to explain 10 Windows it's good.

  It is a forum for peer-to-peer volunteers public World Wide web.

  Essentially, you missed (or simply press the 'X') the message you plan / cancel the upgrade.  It is more a case of 'you don't say no... " (that does not suck).

  Learn more about that here:

  http://www.PCWorld.com/article/3073457/Windows/how-Microsofts-nasty-new-Windows-10-pop-up-tricks-you-into-upgrading.html

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/i-was-notified-that-my-PC-will-upgrade-to-Windows/7634fa03-6f4c-4008-b656-b91bcc8d5714

  Basically (with some variations) three ways to restore your computer to a previous operating system, once it has been upgraded to Windows 10...

  * Best method: restore using a full image backup of the system that you have created in your normal computer maintenance tasks.  If you do not do so during your normal maintenance, you should probably expand it once you get things in the State you want.  If you've done one, but still need help to apply it, just answer here and someone can / will surely help you.

  Possible next method: (with reservations as being less than 30 days since the upgrade, you having not done anything that would affect the three necessary directories to restore like disk cleanup or or using online media creation tool) use integrated Windows 10 to your previous operating system recoverability.  The following link will take you to a web page that explains this method pretty well and completely:
  http://www.CNET.com/how-to/Windows-10-how-to-roll-back/

  Possible next method: use your installation media/recovery media to restore the system to the factory settings and update/install other apps using their media and restore periodic backups / consistent personal and other data.  It is a CLEAN INSTALLATION (from scratch).

• After playing games online, I closed the window and sees a piece of the game into my office window. It looks like a virus. What should I do?

  After playing games online, I closed the safari window but I can barely see the walkthrough of word written in my office. I changed my desktop to a solid color, so I can see it better. I also see the Netflix pause button and if I reduce the window as I type right now I see Select a community to Post To my office. Is this a virus? If yes what should I do to fix it?

  Thank you!

  Are you referring to the "ghost image" or "ghosting"?

  Avoiding persistence on Apple displays - Apple Support

• I have a 2008 4 GB iMac and 2.4 ghz and lately been so slow today freezes and weird actin, I don't know if you have a virus or what his past

  I have an iMac 2008 / 4 GB 2.4 GHz and lately been so weird and slo freeses today without any reason than lines and I couldn't stop I think has a virus and I do not know what to do someone help me please

  Audi

  Your Mac does not a virus.

  How much free space on the drive there?

• My devices receive a warning where do I contact Apple to take the virus off what do I do

  I don't know what to do my mini iPad and iphone 5 c got the same messages where they. Say there's a virus and communicate with the company apple.

  These messages are scams, and they provided contact information are not in fact Apple. Do not call this number as you should talk to Crooks and not Apple.

  See: a local browser took more than Safari and go to the section of iOS for instructions on how to get rid of the pop ups.

• Accidentally let a virus scan, what now?

  Unfortunately, I am new to the mac community. I received a message saying "VIRUS DETECTED" in Safari. He wanted to scan my computer for viruses. I thought it to be real and let it scan my computer. He said "scanning documents" and other info from my mac. However, did not go further. I left out of it. I'm afraid now that the virus has all my personal information. I don't know what to do. Please help me!

  Download and run this:

  Malwarebytes Anti-Malware for Mac

  There is really no viruses for a Mac but it is malware and adware.

  However, they could have installed a key logger. I would boot to recovery

  OS X: on OS X Recovery - Apple Support

  then format the HD and restore from a backup that was made before allowing you the analysis

• my computer has been destroyed by a virus Trojan - what I do to format disk

  my computer has a couple of Trojans found by scan, then every day it just worse and worse until today when Internet Explorer is gone and most of the programs and accessories - help

  Hi Naillig,

   
   
  1. What is the operating system installed on your computer?
  2. what anti-virus software is installed on your computer?
   
   
  I suggest you to follow the steps and check if it helps.
   
   
  Method 1: Follow the link and scan your computer in safe mode with network and try to remove the virus from your computer.
  To use a safe mode with network option, follow these steps:
  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  (b) use the arrow keys to choose Safe mode with networking in the Windows Advanced Options menu appears, and press ENTER.
  Startup options (including safe mode) for Windows Vista
   
   
  Startup options (including safe mode) for Windows 7
  
  How to remove a computer virus?
   
   
  Note: This link is also applicable to Windows Vista and Windows XP.
   
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  If you want to format your computer, you can take the backup files and you can re - install Windows.
  Back up your files to Windows 7
   

  Back up your files for Windows Vista Install, reinstall, or uninstall Windows

   
   

• Microsoft safety scanner only partially remove Sirefef.AH Virus. What would be the next steps to completely remove this virus?

  I scanned with MSE, Microsoft Security Scanner, Spybot S & D and nothing's going to get rid of this virus. At this point, Microsoft Security Scanner is the only one to recognize the presence of the virus. The rest say that the computer is clean. Help me please!

  Thank you

  Mike

  Several options can be found here: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/keep-getting-virus-trojen-win32-sirefefah/3b0081c8-5342-4683-b434-e1a42f3cda10

  Suggest revisiting you and make your choice.  And if you don't mind, let us know what works for you... it will help the people who have read this thread.

  Note of the suggestion of tricky300 about Superantispyware.  You could try Superantispyware Portable to include put it on a flash drive and it works from the flash drive to scan your computer.

  Kind regards...

• I continue to receive windows popup on Windows Security Advanced Security Center (Windows Smart Partner) is Microsoft or is someone hack into my computer, or a virus or what?

  Vista Windows

  Hi Jim,.

  What is the exact message that you receive?

  I suggest you to follow the steps and check if it helps.

  Method 1: If you think that there are viruses on your computer, you can scan your computer by following the link and check if it helps.
  How to remove a computer virus?

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Please after return with the screenshot of pop to help and serve you better.
  How i: post a screen shot on this forum?

• Malware scanner found hundreds of viruses. What to do now?

  Hello

  my friend has a laptop Toshiba, model no. PSAK2E - 001003KS. She came to tell me that she can you use his cell phone and when I started the laptop, it says hard drive failure and it still allows me to start window.

  When I checked it didn't even run anti virus, so I scanned the virus with a malware scan, the scan has found hundreds of viruses even in about 10 minutes. But the thing is that the laptop shut itself down before the finished scan, and everytime when I start it, it turn off by itself after a few minutes of the window being initialized.

  Do you think that the cause is malware? But no idea how I can clean while I can not even finish the scanning?
  Thx a lot...
  Appreciate it

  Don t waste your time to scan the HARD drive. Reinstall the OS and restore your laptop to a friend with your own OS preinstalled.

  Believe me, it's the best thing you can do.

• Windows XP code Stop 0x0000007B (0xF78AE524, 0xC000000E, 0x00000000, 0x00000000) the machine does not start in safe mode or give me a command prompt to run a chkdsk or virus scan, what should I do?

  I have Windows XP on another system.  When we started, we had a blue screen with the above error codes.  I tried to restart and boot into safe mode and safe mode with command prompt, but right after that I chose the option of start, blue screen error reappears with this code.  How can I get the machine to start so I can run a virus scan or restore?

  a google search showed this article http://support.microsoft.com/kb/324103

  You can try to boot in the recovery of a XP cd console.

• my computer sunddenly had a password, and I'm not one that says. Now I can't open my computer more. It is caused by a virus? What should I do? Is there another way to remove the password, without reformatting?

  I'm the only person who is using my computer.  And I know that I have does not have a password.

  It is impossible for us to know here if your computer is infected. See if you can connect to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  If you can get, go to control panel > user accounts and remove the password for your user account. Then scan your computer for viruses/malware by:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you reset the password of the account administrator integrated into house or have Pro and don't remember the password (or have Pro/Media Center and use the administrator for your daily work and so is the administrative account only on the system), NTpasswd allows you to change the password of the built-in to a white administrator account. Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/pnordahl/ntpasswd/

  Then open a session with the password to blank (null) and make changes, scan, etc.
  MS - MVP - Elephant Boy computers - don't panic!

• HP Tech support person told me that my computer has a virus. What should I do?

  Order of business was introduced to solve this problem, and HP began to solve this problem when I was disconnected from them. Always have viruses.

  Try to run Microsoft Safety Scanner:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  It will help eliminate the malicious and other Virus software.

• What kind of virus won't prevent you to connect to the internet and how do I get rid of him?

  Having been on my computer for hours very well, I left to pick up my girls from school, and my window was open to yahoo.  When I came back, the computer was off.  I tried to turn it back on and it wouldn't do anything.  the fire came, but it never came.  After you play with it for a bit, I finally managed to do turn it on, but it does nothing else.  I can't get into all programs and I can't connect to the internet.  After a few fault-finding with cox for more than an hour, they determined that I have a virus.  What kind of virus can put your computer completely out of use and how do I get rid of him?

  Hello

  stops a lot of malware connect to the net

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  make it work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• My vista windows Defender does not work after got rid of the virus Windows diagnosis. What can I do?

  It gives me an error code and says that my windows defender is stopped. Is it because I have installed Microsoft Security Essentials to help eliminate the virus. What should I do? I tried unistalling it and reinstall but it won't let me not just uninstall first. In addition, the virus has a sound, it does at the start and he is always on my computer when I start my computer. This means that the files are still on my computer?

  Hello

  That's right

  MSE stops at the vista version of windows defender

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  follow these steps to remove this malware that you think it's still there

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.