VISA read very slow communication
Hello
IM using serial communications VISA in my project and I noticed that the reading block works very slowly.
I have the microcontroller that connected to my laptop through XBee modules.
Baud rate is 9600 due as a change factor in each component in the line won't make a difference at all.
Also, I checked that it work with terminal XCTU and its working fine (very fast). so his can not be something else except read VISA.
Please see VI attached file.
Thanks for any help,
If you do not use a stop character, then the read VISA will sit and wait that 100 characters have been received by the COM port or the timeout elapsed (which is probably something like 5-10 seconds long). You can change the time-out period (using a property node) or reduce the number of characters you read each time that the loop runs.
Without a termination character, you will need to build your own string using a shift register buffer - whenever you make a VISA read, add it to the chain on the shift register and then do some analysis to take control of your microcontroller (e.g. alarm, coordinated) and remove all the foregoing orders of the string buffer (for example if you have started the VI in the middle of a command) ", then you don't want to throw these data).
Tags: NI Software
Similar Questions
-
Hello
I am quite new to Labview and Arduino, so I apologize if I use the incorrect terms. I'm having some trouble with the next project, I hope that you guys can give me some advice!
I have 16 sensors connected to the 16 analog pins on an Arduino mega Board. This Council has a shield mounted upon him, with a Xbee module wireless. I have another Xbee module that communicates with him and it is mounted on a USB dongle that plugs into a PC with Labview 2015.The A/D analog Arduino pin output is read and sent every 50ms to the Xbee module connected to the PC. So every 50ms (that is, a frequency of 20 Hz), a new line of analog readings by commas is sent, using AnalogRead and Serialprint in the Arduino. These data are fed to a Labview code with architecture of producer-consumer. Copy the following code configures a serial port of VISA, reads the data, it converts a voltage value and writes the data to a text file (see block_diagram.jpg).
The problem is that at a frequency of 20 Hz (with the configuration of the attached jpg) when you reach 400 treatment iterations the code slows down considerably and values are not parsed correctly. It behaves as if the queue is full (but the queue of elements indicators show 0) or memory or the buffers were full. It seems quite surprising to me given that the sampling rate is so slow. I tried a few configurations setting the buffer size, empty the buffer by using the queue time, but nothing seemed to work. Is it because the processor loop takes too much time to iterate? I tried to disable data analysis, conversion of voltage and the generation of text file, just keep reading and still have the same behavior.
This may be the cause? Suggestions to change the block diagram are welcome! Is there a better way to do this than with VISA or queues...?
I use Labview 2015 on Windows 7.
Thank you!!
sminanog wrote:
It behaves as if the queue is full (but the queue of elements indicators show 0) or memory or the buffers were full.
You think along the good things. But the big problem I see here is that you have a table growing up to stop the program. You must move the file writing to be inside the loop of your consumption. This will eliminate the need to constantly develop your table in the shift register, with tons of memory and causing copies of memory (which is very expensive).
The other concern I have is the speed at which data is available. If you have a baud rate 9600, then in the 50ms debit you can pass 48 bytes. This leaves 3 bytes per sample, including the comma. If you have a debit 115 200 baud baudrate, it turns into 576 bytes, you can send the 50ms. So the lesson here is to make sure that you use a transmission speed which is fast enough to handle the data that you want to send.
-
Comments are negative for El Capitan, freezing, email fails, tough screen fonts to read and very slow performance.
Why install it?
Why Apple is not read these comments and 'Fix' the questions?
Because they are nonsense
-
very slow file read/copy of WinXP to Win7
I have two PCs, it is WInXP, one is Win7. On Win7, I produce read/copy of WinXP to Win7, it is very slow, about 10% of the 100 Mbps network (as indicated by the Task Manager and the status of file copy). However, if I do the copy of file for WinXP to Win7, it is very fast, about 90% of the 100 Mbps.
It is using windows file sharing.
Why is this?
Please note that all operations are done on the Win7 PC, I have not tried to do it on PC WinXP again. There are a few problems with Windows XP, access to the share on the Win7 PC (which can access any other PC Win7). But it is not so important.
I do regular files between WinXP PC at work, they are typically 50% of 100 Mbps.
Thank you.
Hello
Please take a look at this thread that deals with what seems to be an ongoing problem that topic exactly. http://social.technet.Microsoft.com/forums/en/w7itproperf/thread/c723939a-c917-486A-a57c-83d0f76dfc49
-
My macbook pro mid-2012 is very slow. Do I need a new battery?
Hello world
Support on this community has helped me tremendously before so I thought I'd post again about a new problem.
I upgraded my Mac with an SSD, which works very well, with more RAM; However, recently, it has been very slow and train, and I don't know why. RAM is not being crazy, so it must be something else.
After reading the other posts, I'm thinking maybe I need a new battery? I mean I have 893 cycles ahah. Could someone help with this?
Here is my log of Etrecheck:
EtreCheck version: 2.9.12 (265)
Report generated 2016-06-07 02:57:40
Download EtreCheck from https://etrecheck.com
Time 01:38
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
MacBook Pro (13-inch, mid-2012)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro9, 2
1 2.5 GHz Intel Core i5 CPU: 2 strands
8 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
Battery: Health = battery check - Cycle count = 893
Graphics Intel HD 4000
Color LCD 1280 x 800
OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour
500 GB SAMSUNG SSD 850 EVO Disk0: (500,11 GB) (Solid State - TRIM: Yes)
EFI (disk0s1) < not mounted >: 210 MB
SAMSUNG SSD 850 EVO 500 G Media (disk0s2) /: 499,11 go-go (287,31 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
MATSHITADVD-R UJ - 8À8)
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
/ etc/hosts - number: 20
Any where
/ Library/Extensions
[loading] com.globaldelight.driver.BoomDevice (1.4 - SDK 10.10 - 2016-06-03) [Support]
[loaded] 8 tasks Apple
[loading] 162 tasks Apple
[operation] 68 tasks Apple
[loaded] 47 tasks Apple
[loading] 163 tasks Apple
[operation] 81 tasks Apple
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-12) [Support]
[loading] com.google.keystone.agent.plist (2016-03-02) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2016-05-12) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-12) [Support]
[loading] com.adobe.fpsaud.plist (2016-05-09) [Support]
[loading] com.bombich.ccchelper.plist (2015-11-30) [Support]
[loading] com.google.keystone.daemon.plist (2016-03-02) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2015-01-16) [Support]
[loading] net.freemacsoft.LiteIcon.LIHelperTool.plist (2014-08-26) [Support]
[loading] org.cindori.SenseiTool.plist (2015-12-03) [Support]
[loading] org.cindori.TEAuth.plist (2015-12-03) [Support]
org.eyebeam.SelfControl.plist [no charge] (2016-04-28) [Support]
[failure] com.adobe.ARM. [...]. plist (2016-01-09) [Support]
Workflow application (/ Applications/Flux.app)
PopClip application (/ Applications/PopClip.app)
BetterSnapTool application (/ Applications/BetterSnapTool.app)
Alfred 2 Application (/ Applications/Alfred 2.app)
ClipMenu application (/ Applications/ClipMenu.app)
Decision on application (/ Applications/Hear.app)
Fan of Macs control application (/ Applications/Mac Fan Control.app)
Hocus Focus application (/ Applications/Hocus Focus.app)
[operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper
[ongoing] com.crystalidea.MacsFanControl.60192
[ongoing] com.etresoft.EtreCheck.207712
[ongoing] com.globaldelight.BoomDaemon
[ongoing] com.google.Chrome.163232
[ongoing] com.hegenberg.BetterSnapTool.49632
[ongoing] com.naotaka.ClipMenu.52192
[ongoing] com.pilotmoon.popclip.291872
[operation] com.runningwithcrayons.Alfred - 2.166432
[ongoing] com.uglyapps.HocusFocus.264992
[ongoing] org.herf.Flux.119072
[loading] 412 tasks Apple
[operation] 173 tasks Apple
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-15) [Support]
GameFacePlugin: GameFacePlugin 1.8.0.1 - SDK 10.5 (2012-11-16) [Support]
Unity Web Player: UnityPlayer version 5.0.3f2 - SDK 10.6 (2015-08-04) [Support]
Default browser: 601 - SDK 10.11 (2016-05-17)
AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-11-30) [Support]
FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]
AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
Silverlight: 5.1.30514.0 - SDK 10.6 (2015-11-30) [Support]
QuickTime Plugin: 7.7.3 (2016-05-17)
Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-21) obsolete! Update
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
PepperFlashPlayer: 21.0.0.242 - SDK 10.6 (2016-06-07) [Support]
AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
SharePointBrowserPlugin: 14.4.8 - SDK 10.6 (2015-02-26) [Support]
JavaAppletPlugin: 15.0.1 - SDK 10.11 (2015-11-30) check the version of
samesurf_screenshare_32: Unknown (2014-08-10)
1Password - AgileBits - https://agilebits.com/onepassword (2015-09-10)
AdBlock - BetaFish, Inc. - https://getadblock.com (2015-09-27)
Adblock more - Eyeo GmbH - https://adblockplus.org/ (2015-09-27)
ClickToFlash - Marc Hoyois - http://hoyois.github.com/safariextensions/clicktoplugin/ (2015-08-04)
Hear: 1.1.6 - SDK 10.8 (2014-11-03) [Support]
Flash Player (2016-05-09) [Support]
FUSE for OS X (OSXFUSE) (2015-10-25) [Support]
Mobile backups: OFF
Automatic backup: NON - automatic backup disabled
Volumes to back up:
Destinations:
Seagate 3TO [Local]
Total size: TB 3.00
Total number of backups: 4
An older backup: 2014-12-12, 14:35
Last backup: 2015-11-23, 08:35
Size of backup drive: Excellent
Size of backup 3.00 TB > (disk size 0 B X 3)
67% Google Chrome Helper (6)
37% Google Chrome
6% kernel_task
6% WindowServer
2% PopClip
Top of page process of memory: ⓘ
770 MB Google Chrome Helper (6)
Kernel_task 747 MB
Chrome Google 188 MB
Mdworker (9) 172 MB
Mds_stores 164 MB
4.25 GB free RAM
used 3.75 GB RAM (1.70 GB being cached)
Used Swap 0 B
7 June 2016, 02:50:29 self-test - spent
Hello. Try restarting your Mac.
Try to start:
-Stop your Mac
-Wait until your computer turns off and after that press the power button
-Just after you hear the startup tone, press in and hold the SHIFT key
-Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar
-Once your Mac boot, restart dhcpd as you usually do.
If this does not help, follow the instructions below:
-Stop your Mac
-Wait until your computer turns off and after that press the power button
-Just after you hear the startup tone, press in and hold the SHIFT key
-Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar
-Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)
-Click on the disc to check, then, if requested to solve the problems on the repair disk
-After that click on verify disk permissions, and then click Repair disk permissions
-Once the process is complete, stop your Mac and turn it on again after 30 seconds
Apart from this, take a look at this article from Apple and follow the instructions to reset NVRAM shown here:How to reset the NVRAM on your Mac - Apple Support
Try resetting the system management controller: https://support.apple.com/en-us/HT201295
I also suggest upgrading your RAM.
I hope this helps!
-
TDMS read is slow on the cRIO9024
Hey
I am currently changing my old program to save data in the TDMS files instead of text files. The file size is much smaller and the write speed is reasonable. The problem is that when I read the PDM file, it seems very slow (11,293 seconds) and acquires the ability to almost full CPU (97%) for a few seconds, which will reduce the communication of the user interface. The file size is less than 9MB 37 columns with 30000 lines. I'm not sure it's normal or not, just to feel a little hard to believe. The same program works fine on my laptop (1,281 seconds), but of course it has a more powerful processor (dual 2.5 GHz instead of 800 MHz cRIO). In the meantime a bright idea, thank you.
-
Visa reading reads all bytes to the port
I have a camera that I communicate via the Serial Port. I have a standard communications protocol. For a particular command, I know that the exact number of bytes expected in return. I send my order. I see the correct number and exepcted to bytes in the port. I then read the number of bytes in the port. However, the VISA read returns only the first two bytes.
I contacted success with this camera and this Protocol for more than 130 commands unique and different. There are only about 6 orders in which the read visa does not read all the bytes in the port. Anyone know why that would happen? I expect to see 6 bytes. I see 6 bytes. I have visa read the command with 6 bytes. The visa read returns only the first 2 bytes. It's very very frustrating. I can do this exact process even with a different command. I expect 45 bytes of this command. I see 45 bytes with this command and I read 45 bytes with this command.
I don't think that it is device connected as I can converse with success with the same camera on the same computer with the same cable of connector using non-LabView. It seems to be a problem strictly related to labview and VISA read the order. If someone could help that would be greatly apprecicated.
Thank you.
What is the exact byte stream that await you in return with this command?
Instead of opening VISA, use the configuration Serial Port VI. In this way, you can override the default values. It looks that your instrument using all the defaults VISA of speed in baud rate, start and stop bits, etc. However, in the VISA software, there is a failure to use a termination character, and this character is 10 (0x0A). If you use the configure Serial Port, you can tell the pilot VISA do not use the stop character.
-
In Excel 2007, copy the conditional formatting cells is very slow
I've just upgraded to Excel 2007 (SP 2) since 2000 in the hope that it would be faster. I have a large spreadsheet consisting of a database of about 5000 lines and a number of leaves each grids showing cells of 7 x 7 with conditional formatting in each cell.
In 2000, I had to stop automatic recalculation. In 2007, the recalculation is much faster, but when I created a piece of copy and past cells 7 x 7 with their conditional formatting, it is very slow and eventually is short-term memory.
I am running XP service pack 3 on processor 1.6 ghz with 1.9 GB of ram.
Any suggestions?Hello bailes2,
Thanks for posting on the Microsoft answers Forum.
The question you have posted is linked to Excel 2007 and would be better suited to the office community.
Please visit the link here to find a community that will provide the support ask youSincerely, Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
On a Vista Home premium computer, one login has very slow keyboard response. It takes 3-4 seconds the button down to get an answer, or a keyboard repeat. Other connections work fine. The mouse works fine. The problem effects all, atfter loging in. You cannot open the startmenu, type a document, use a keyboard shortcut, adjust properties keybord, nothing.
Hello Worshil,
Thank you for visiting the website of Microsoft Windows Vista Community. Your question looks like a corrupted profile. The link below explains to correct a corrupted profile.
http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Thank you for using answers Forum. Please let us know how it works.
Joseph
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
My computer is running very slowly - i7 (quad) 266 Mhz and Geforce 9800 GTX graphics card. I had this computer for about a year. The problems seemed to start about 3 months when I started to play a game - Empire Total war with Steam. The computer ran more slow and more slowly, gradually. I tried all the clean disk, speed up programs, he worked once for a few days and then become very slow. Finally, I backed up my files and reformat the hard drive and reloaded windows 7. My computer has nothing loaded except windows 7 and is always very slow! Hardware issues? Help, please.
Set of utilities to test for computer HARDWARE manufacturers:
Note: If you are OverClocking or use an automatic overclocking or BIOS features, energy saving
Start by disabling: Intel EIST, Turbo Mode, Cool and pretty
and fall at the speed of stock as a starting point.Disconnect the other internal hard drives and external USB devices.
Look for any loose hard drive power or cables SATA, graphics card or other power cables.CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
Watch the clock speed of the CPU under various conditions of loading
(when using speed step technology Intel EIST).
#1 Note:
CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
for each memory location is full.
#2 Note:
COMPARE the two values, the actual speed should not exceed the rated speed of your memory.Prime95: Displays your actual speed of the processor when using CPU ID under a heavy load.
http://www.Mersenne.org/freesoft/
It's a stand alone .exe file contained in an archive .zip.
Simply choose to run the 'stress test' option for 3 hours or more.
If your PC can pass this test, your memory and CPU
are very good (close the housing cover in order to maintain adequate ventilation)Core Temp:
The temperature of each core of the processor.
Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
35 to 40 ° C at idle and 60-65 c max when running Prime95.
http://www.alcpu.com/CoreTemp/-----------------------------------------------------------------------
Also: Try running Memtest86 +: it runs from a floppy disk or CD, you must remove or
confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Hard drive test - CD Bootable:
Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRDFor Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticOnce Windows is installed:
Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
Check their support site for the latest drivers as the CD that came with the motherboard may have
older less stable drivers.Visit the download of the manufacture of the graphics card: download and install the most recent Windows 7 drivers
for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-usSee also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
or equivalent ATI.CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
voltages, temperatures, fans speed.
http://www.CPUID.com/HWMonitor.phpTest of Stress of FurMark GPU (graphics card):
http://www.oZone3D.NET/benchmarks/fur/Pass marks burn in test: http://www.passmark.com/
Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.HD Tune:
Provides information of the car and has an option (tab scan error) to test your drive.
http://www.hdtune.com/SpeedFan:
Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
It displays your drives model number and compares your drive with other discs of the same brand and model.
http://www.almico.com/SpeedFan.phpGPU - Z:
A utility light, designed for you give information about your video card and GPU.
http://www.techpowerup.com/GPUZ/PC WIZARD:
A powerful utility designed especially for detection of hardware, also analyses more.
He is able to identify a large scale of system components and supports the latest technologies
and standards.
http://www.CPUID.com/pcwizard.phpPartition Wizard Home Edition:
http://www.partitionwizard.com/free-partition-manager.html
Note: There is also a CD bootable or versions of the bootable Flash drive:
http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
http://www.partitionwizard.com/bootable-Flash-drive.html
Among the features and functions: create partition, Delete partition, format partition,.
A partition resize, move partitions, Partition recovery after an accidental deletion,
Convert the partition, partition Explore, Hide partition,
Change the drive letter, a partition active Set, Explorer (content display) of the partition.
Note: To complete any task use the "Pending Operations" box at the bottom left.Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
EASEUS Partition Master Home Edition (free):
http://www.partition-tool.com/
Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.Hiren BootCD
http://www.Hiren.info/pages/Bootcd
Hiren BootCD from USB (USB key)
http://www.Hiren.info/pages/Bootcd-on-USB-disk
(something more questions)UBCD4Win:
http://www.UBCD4Win.com/index.htm
UBCD4Win is a recovery CD bootable that contains software used for repairing,
restoration or diagnose almost any computer problem.MyEventViewer - an easy way to display your event logs:
http://www.NirSoft.NET/utils/my_event_viewer.htmlNever be afraid to ask. This forum has some of the best people in the world to help.
-
MacBook Pro mid-2012 very slow
Hello
My MacBook Pro is very slow (it has gotten worse recently). Applications to take ages to load, Firefox is hogging resources and very slow, get the focus of the mouse has a huge lag and I was spinning.
Currently I have 4 GB of RAM and is considering the upgrade to 16 GB. You run an EtreCheck report (below). Is there anything else I need to do? Why he began to be so slow after years of reasonable speed? Is there something I can adjust in Firefox?
Opening documents and get stuff done becomes frustrating!
Thank you for your support.
EtreCheck version: 3.0.4 (308)
Report generated 2016-09-21 12:50:28
Download https://etrecheck.com EtreCheck
Duration 09:05
Performance: average
Click the [Support] links to help with non-Apple products.
Click the [details] links for more information on this line.
Problem: The computer is too slow
Description:
Computer is slow, Internet is slow, the development of the mouse in any program is slow, a lot of spinning.
Hardware information: ⓘ
MacBook Pro (13-inch, mid-2012)
[Technical details] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro9, 2
1 2.5 GHz Intel Core i5 CPU: 2 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 378
Video information: ⓘ
Graphics Intel HD 4000
Color LCD 1280 x 800
System software: ⓘ
OS X El Capitan 10.11.6 (15-1004) - time since started: about 7 days
Disk information: ⓘ
Disk0 APPLE drive HARD TOSHIBA MK5065GSXF: (500,11 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Macintosh HD (disk 1) /: 498,88 (Go 298,35 free)
Encrypted AES - XTS unlocked
Storage of carrots: disk0s2 499.25 GB Online
MATSHITADVD-R UJ - 8À8)
USB information: ⓘ
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Information crush: ⓘ
Apple Inc. Thunderbolt_bus.
Goalkeeper: ⓘ
Mac App Store and identified developers
Startup items: ⓘ
HWNetMgr: Path: / Library/StartupItems/HWNetMgr
Startup items are obsolete in OS X Yosemite
Launch system officers: ⓘ
[loaded] 7 tasks Apple
[loading] 149 tasks Apple
[operation] 66 tasks Apple
[killed] 16 tasks Apple
16 killed processes lack of RAM
Demons of launch system: ⓘ
[loaded] 45 tasks Apple
[loading] 143 tasks Apple
[operation] 86 tasks Apple
[killed] 16 tasks Apple
16 killed processes lack of RAM
Launch officers: ⓘ
[performance] HWPortCfg.plist (2015-09-04) [Support]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a 23d420d.plist (2016-07-11) [Support]
[loading] com.google.keystone.agent.plist (2016-07-12) [Support]
com.oracle.java.Java - Updater.plist [no charge] [Support]
[operation] com.trusteer.rapport.rapportd.plist (2016-07-18) [Support]
[loading] ouc.plist (2015-09-04) [Support]
Launch of the demons: ⓘ
[loading] com.adobe.ARMDC.Communicator.plist (2016-07-11) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-11) [Support]
[loading] com.adobe.fpsaud.plist (2016-08-30) [Support]
[operation] com.backblaze.bzserv.plist (2016-07-11) [Support]
[loading] com.google.keystone.daemon.plist (2016-09-02) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2012-04-02) [Support]
com.oracle.java.Helper - Tool.plist [no charge] [Support]
[loading] com.oracle.java.JavaUpdateHelper.plist (2014-06-09) [Support]
[operation] com.trusteer.rooks.rooksd.plist (2016-07-18) [Support]
Launch User Agents: ⓘ
[failure] com.adobe.ARM. [...]. plist (2013-01-06) [Support]
[operation] com.backblaze.bzbmenu.plist (2016-09-14) [Support]
Internet Plug-ins: ⓘ
FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]
QuickTime Plugin: 7.7.3 (2016-07-09)
AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-14) [Support]
AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-14) [Support]
Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]
Default browser: 601 - SDK 10.11 (2016-07-09)
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-22) [Support]
SharePointBrowserPlugin: 14.6.8 - SDK 10.6 (2016-09-14) [Support]
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
3rd party preference panes: ⓘ
Backblaze Backup (2016-07-11) [Support]
Flash Player (2016-08-30) [Support]
Trusteer Endpoint Protection (2016-07-18) [Support]
Time Machine: ⓘ
Skip system files: No.
Mobile backups: WE
Automatic backup: YES
Volumes to back up:
Macintosh HD: Disc size: 498,88 GB disc used: 200,52 GB
Destinations:
FREECOM HDD [Local]
Total size: 249,72 GB
Total number of backups: 36
An older backup: 10 19, 2015, 23:58
Last backup: 09 17, 2016, 22:59
Backup disk size: too small
Backup size GB 249,72 < (disc 200,52 GB X 3)
Top of page process CPU: ⓘ
29% firefox
6% bzfilelist
4% kernel_task
3% coreaudiod
3% WindowServer
Top of the process of memory: ⓘ
1.58 GB firefox
652 MB kernel_task
Mdworker (11) 123 MB
Skype 82 MB
QuickLookSatellite (3) 57 MB
Information about virtual memory: ⓘ
26 MB of free RAM
3.97 GB used RAM (621 MB Cache)
5.32 GB used Swap
Due to the limitation of memory, memory virtual swap used 5.32 GB which is the main part of the slowness.
It would be better to RAM as soon as possible.
-
Hello
for three years, I never had any problem with my Mac. Now, all of a sudden, from one moment to the other, it runs very slowly. Also, I have to force every time you start the Mac with pressing the button for a few seconds. When closing the laptop and opening it, it locks again as well (only the screen black, start must be forced).
First thing I noticed was that kernel_task uses up to 400% of the RAM. I tried to find the problem myself, read about kernel_task, and did the following things (without success):
-Updated to the latest version of El Capitan
-Reset NVRAM and SMC
-hardware running apple diagnostics test (Code: ADP000 find anything)
-removal of protected system /System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns/ACPI_SMC _PlatformPlugin.kext/Contents/Resources to another folder, files and then reboot
-make an EtreCheck.
Can someone help me? Especially to interpret the diagnosis of EtreCheck?
EtreCheck version: 2.9.13 (267)
Report generated 2016-08-08 15:04:23
Download EtreCheck from https://etrecheck.com
Time 06:37
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
Description:
All of a sudden, MacBookAir runs very very slow. Everything takes forever.
Duty to force each start by pressing the button for 7 seconds.
kernel_task use ±300% RAM all the time.
No fan noise, not a spillage. MacBookAir has warm as usual (not at all).
Reset NVRAM and SMC memory did not help.
Test hardware said no material error (Code: ADP000).
MacBook Air (13 inch, mid 2013)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Air - model: MacBookAir6, 2
1 1.3 GHz Intel Core i5 CPU: 2 strands
4 GB RAM not extensible
BANK 0/DIMM0
OK 2 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en0: 802.11 a/b/g/n/ac
Battery: Health = Normal - Cycle count = 522
Intel HD 5000 graphics card
Color LCD 1440 x 900
OS X El Capitan 10.11.6 15G (31) - since startup time: less than an hour
SM0128F SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Macintosh HD (disk 1) /: Go 120,10 (17.04 GB free)
Storage of carrots: disk0s2 120.47 GB Online
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
/Applications/TunnelBlick.app
[no charge] net.tunnelblick.tap (20141104 (Tunnelblick build 4560) - 2016-05-09) [Support]
[no charge] net.tunnelblick.tun (20141104 (Tunnelblick build 4560) - 2016-05-09) [Support]
[loaded] 5 tasks of Apple
[loading] 167 tasks Apple
[operation] 66 tasks Apple
[loaded] 46 tasks Apple
[loading] 160 tasks Apple
[operation] 84 tasks Apple
[loading] com.google.keystone.agent.plist (2016-07-12) [Support]
[no charge] com.oracle.java.Java - Updater.plist [Support]
[loading] com.adobe.fpsaud.plist (2016-06-29) [Support]
com.Apple.Installer.osmessagetracing.plist [loading]
[loading] com.flexera.ia.helper.plist (2016-05-09) [Support]
[loading] com.google.keystone.daemon.plist (2016-07-12) [Support]
[no charge] com.oracle.java.Helper - Tool.plist [Support]
[loading] net.tunnelblick.tunnelblick.tunnelblickd.plist (2016-05-09) [Support]
org.eyebeam.SelfControl.plist [no charge] (2016-06-07) [Support]
[loading] com.bittorrent.uTorrent.plist (2016-01-18) [Support]
[failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-17) [Support]
[loading] com.nchsoftware.switch.schedule.LikeSurvey.plist (2015-06-15) [Support]
[loading] net.tunnelblick.tunnelblick.LaunchAtLogin.plist (2015-01-08) [Support]
[loading] 410 tasks Apple
[operation] 163 tasks Apple
FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-08-04) [Support]
QuickTime Plugin: 7.7.3 (2016-07-09)
Flash Player: 22.0.0.209 - SDK 10.9 (2016-08-04) [Support]
EPPEX plugin: 4.1.0.0 (2011-07-27) [Support]
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]
Default browser: 601 - SDK 10.11 (2016-07-09)
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
Silverlight: 5.1.41212.0 - SDK 10.6 (2016-02-05) [Support]
Unity Web Player: UnityPlayer version 4.6.5f1 - SDK 10.6 (2015-05-07) [Support]
AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-20)
Facebook - Sonny Fazio - http://sonstermedia.com cleaner (2013-08-30)
Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-07-24)
RSS-Eradicator - Anton Osika - http://antonosika.github.io/newsfeed-eradicator/ (2016-06-09)
Ghostery - GHOSTERY, Inc. - https://www.ghostery.com/ (2016-04-06)
Flash Player (2016-06-29) [Support]
Time Machine not configured!
36% safari
com.apple.WebKit.WebContent (3) 35%
32% WindowServer
22% mds_stores
12% kernel_task
Top of page process of memory: ⓘ
Safari of 700 MB
627 MB com.apple.WebKit.WebContent (3)
Kernel_task 495 MB
Mdworker (13) 201 MB
Mds_stores 147 MB
206 MB free RAM
used 3.80 GB RAM (801 MB cache)
Used Swap 0 B
8 August 2016, 14:44:22 self-test - spent
August 8, 2016, 13:58:15 /Library/Logs/DiagnosticReports/Safari_2016-08-08-135815_[redacted].hang
/Applications/Safari.app/Contents/MacOS/Safari
Thank you very much!
KlausKandinsky
you have 4 GB of RAM that can be demanding on the system regardless of suggestion of apples El Cap with run with 2; It will be, but do not expect to use the computer for a large part to start the system.
also you run bit torrent, any software you get this service is suspect.
Stop
Disconnect all external devices
start in safe mode
https://support.Apple.com/en-us/HT201262
test the system and runs better restart normally.
-
Very slow contacts and to open and contacts being deleted
I found that my contacts are very slow to load and change and that contacts are being deleted without my knowledge.
Hi svenvy,
I don't know where you keep your contacts but maybe it's that you need to condense their or check if the Web page contains errors. If it's Firefox, please visit: Firefox is slow - how to make it faster -
Firefox is very slow. Common solutions have not worked
Hello
I really hope someone can help!I have a 5920 AcerAspire on Window Vista
Thunderbird has become very slow - up to 10 seconds to load a page (especially since this Monday).
So far, I have:
Used 3 pieces different malware (my normal F Secure, SuperAntiSpyware and Malwarebytes) and got rid of 3 Trojans (all Tracur).SpeedyFox installed - no effect
Updated Plug-ins
Experienced by disabling all plug-ins to see if speeding up things - there is no
Checked with my ISP connection speed. It is very well
Now for some strange reason, since I have updated my Firefox Plugins, I can't open Thunderbird at all - I just get the whirring circle for a few seconds then nothing.
Someone at - it a solution? Please, I beg you!
Well, then let's do it.
Please read how to create a new profile (https://support.mozilla.org/en-US/kb/Managing-profiles) and just create a vacuum, one for testing, if it starts fine with tat, then we know that it is just a matter of a corrupted profile and we can transfer all of your information in the new profile.
-
Suddenly very slow - being report attached - it's just the ram?
Hi all
my macbook suddenly turns very slowly, he has been allowed recently after some graphics clamping because it is so old!
things are critical.
If it's just the ram, (I doubt it, but maybe wrong!) can someone help me with my maximum?
I think that his officially 4 (2 x 2), but remember reading that a 4 + 2 can work?
Thank you
Paul
EtreCheck version: 2.9.10 (261)
Report generated 2016-04-13 13:35:22
Download EtreCheck from https://etrecheck.com
Time 06:22
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
Description:
Suddenly very slow - opening system same pref is delicate. posing for the window of the attachment in mail for mac can take 2 minutes. No process obvious defect. Mac Word fails to meet very often. I hope someone can help! Thank you
MacBook Pro (17-inch, 2.4 GHZ)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro3, 1
1 2.4 GHz Intel Core 2 Duo CPU: 2 strands
2 GB RAM - Insufficient RAM! Extensible - [Instructions]
BANK 0/DIMM0
1 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
1 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 5
GeForce 8600M GT - VRAM: 256 MB
Color LCD 1680 x 1050
OS X El Capitan 10.11.3 (15 d 21) - since the start time: about an hour
FUJITSU MHW2160BHPL disk0: (160,04 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
The PR (disk0s2) MacBookPro /: 159,18 GB (28,37 GB free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Apple computer Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Built-in ISight from Apple Inc..
Mac App Store and identified developers
/ System/Library/Extensions
com [no charge]. LaCie.ScsiType00 (1.2.11 - SDK 10.5 - 2016-04-13) [Support]
com.jmicron.driver.jmPeripheralDevice [no charge] (2.0.4 - 2016-04-13) [Support]
com.lacie.driver.LaCie_RemoteComms [no charge] (1.0.1 - SDK 10.5 - 2016-04-13) [Support]
[no charge] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5 - 2016-04-13) [Support]
[loaded] 9 tasks Apple
[loading] 150 tasks Apple
[operation] 55 tasks Apple
[killed] 22 tasks Apple
the 22 killed process lack of RAM
com.apple.Kerberos.kdc.plist [failure]
[loaded] 46 tasks Apple
[loading] 152 tasks Apple
[operation] 77 tasks Apple
[killed] 12 tasks Apple
12 killed process lack of RAM
[loading] com.epson.Epusp.plist (2009-07-06) [Support]
[operation] com.flipvideo.FlipShare.AutoRun.plist (2010-10-11) [Support]
[loading] com.lacie.eventsactions.launcher.agent.plist (2012-08-14) [Support]
[operation] com.motive.alertDetectorHost.plist (2014-09-06) [Support]
[operation] com.motive.userAgent.plist (2014-09-06) [Support]
[loading] com.adobe.fpsaud.plist (2016-04-05) [Support]
[operation] com.freemacsoft.appcleanerd.plist (2014-09-28) [Support]
[failure] com.lacie.desktopmanager.service.plist (2012-08-14) [Support]
[operation] com.motive.systemDaemon.plist (2014-09-06) [Support]
[operation] com.sonos.SonosLibraryServer.plist (2016-03-16) [Support]
[loading] com.sonos.smbbump.plist (2014-08-10) [Support]
[loading] net.sourceforge.MonolingualHelper.plist (2012-11-13) [Support]
com.apple.SafariBookmarksSyncer.plist [loading]
None
[loading] 386 tasks Apple
[operation] 158 tasks Apple
[killed] 35 tasks Apple
npMotive: 1.0.0 - 10.7 SDK (2014-07-28) [Support]
FlashPlayer - 10.6: 21.0.0.213 - SDK 10.6 (2016-04-13) [Support]
QuickTime Plugin: 7.7.3 (2016-01-14)
Flash Player: 21.0.0.213 - SDK 10.6 (2016-04-13) [Support]
JavaAppletPlugin: 15.0.1 - SDK 10.11 (2011-11-27) check the version of
Default browser: 601 - SDK 10.11 (2016-01-14)
OfficeLiveBrowserPlugin: 12.3.5 (2016-02-09) [Support]
RealPlayer Plugin: unknown
Silverlight: 5.1.20913.0 - SDK 10.6 (2013-11-17) [Support]
iPhotoPhotocast: 7.0 (2012-11-13)
Fan control (2007-10-03) [Support]
Flash Player (2016-04-05) [Support]
Skip system files: No.
Automatic backup: NON - automatic backup disabled
Volumes to back up:
MacBookPro PR: disk size: 159,18 GB disc used: 130,82 GB
Destinations:
Time Machine [Local] backups
Total size: 0 B
Total number of backups: 0
An older backup: -.
Last backup: -.
Backup disk size: too small
Save the size 0 B < (disc 130.82 GB X 3)
7% kextcache (3)
4% kernel_task
4% WindowServer
3% activity monitor
1% mdworker (8)
Top of page process of memory: ⓘ
Kernel_task 311 MB
150 MB com.apple.WebKit.WebContent
Mdworker (8) 94 MB
63 MB activity monitor
49MO Finder
60 MB of free RAM
1.94 GB used RAM (502 MB cache)
2 MB used Swap
April 13, 2016, 12:54 ~/Library/Logs/DiagnosticReports/suggestd_2016-04-13-125400_[redacted].crash
/System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/ suggestd
April 13, 2016, 12:47:39 PM/Library/Logs/DiagnosticReports/Microsoft Word_2016-04-13-124739_ [redacted] .hang
/ Applications/Microsoft Office 2008/Microsoft Word.app/Contents/MacOS/Microsoft Word
13 April 2016, 12:27:03 self-test - spent
April 13, 2016, 11:27:19 AM/Library/Logs/DiagnosticReports/Microsoft Word_2016-04-13-112719_ [redacted] .hang
the 2007 17 "MBP may be increased up to 6 via a 1 2 GB and 1 GB a 4 GB PC2-5300 DDR 2 667 MHz. chips
2 GB, trying to run 10.11 and then DO something ELSE that the operating system will stretch this system.
more RAM will give this computer room to breathe when he tries to run this OS.
I recommend these guys to the United States, and they also have a European distribution
Maybe you are looking for
-
OS: Windows Server 2008R2 (64-bit) Hey guys,. I'm looking for some ideas. There is a server that I am the admin who has a folder with some protected data on it. The problem is that there are about 1 000 subfolders, each needs its own security setting
-
DeskJet 3070 on line and connected by PC tells me unable to print, not connected - help please
I'm on a laptop with Windows 7. I recently moved the printer to a different location. I tried to print them, but in vain. I re-installed the CD and re-configured the wireless, restarted the printer and PC, but no matter what, when I try to print, my
-
How can low disk space, I transfer programs on USB?
I downloaded a trial version of Office Home and Business 2010 after the removal of Office 2003. I'm running out of disk space. How can I transfer programs on USB to save space on my PC? I use XP and I will be upgrading a PC in about 3 months.1 GB OF
-
When I check the updates, it goes into endless loop and never off.
Original title: windows updates When I check the updates, it goes into endless loop and never off. Even if there is no new update, he said usaly. What is gpoing?
-
hp scanjet g4000 software/driver for windows 7
I just upgraded to windows 7 and cannot use my flat of HP scanner (Scanjet g4000) because the software does not work with windows system 7. Can't get the driver/software for download if it is available. It is available right now? If this isn't the ca