VISA serial port automatically configures scan of the available serial ports?

Similar Questions

• I do not use a proxy server to connect to internet, but Firefox is automatically configured to use the loopback address.

  I have a direct connection to the internet and that you do not use a proxy server. Every few weeks, Firefox will automatically reset itself to be configured to use a proxy to the loopback address (127.0.0.1). Manually change to 'No proxy' works, but I have to do so every time I open the browser or even a new tab. The only solution I can find is to create a new profile that gives me a new, clean install of FF, but then I lose all my Add-ons. This has happened several times now and it's extremely frustrating. I have scanned for malware, but have not found any problems.

  Hello rjlasser, first of all please make sure that none of your extensions is the origin of the problem (some circumvention of censorship of youtube addons do also use proxies for example).

  Otherwise please see How to fix the preferences that will not save for common solutions.

• Not able to automatically configure users in the AD via the access policy

  Hello
  I can connect to AD and manually configure a user AD through IOM. Through very well. However, if I use an access strategy to do the same, he's stuck in step 'supply '. All values are identical in shape.
  Any suggestions on why it works manually but not automatically? I have all values including ad server filled my form. Are there additional configuration in the access policy that I'm missing?

  You fill out or have prepops for all the required fields in the form of commissioning?

  Do you have the automatic backup on?

  Best regards
  / Martin

• read the node of the automatic configuration fails with the ERROR: std.err output:

  Please, see full error message at the end of the page. I guess the problem is caused by our boxes give the banner when connecting:
  
  ####################################################################
  # #
  # You enter in a private network. The use of the systems and #.
  # or network may be monitored and recorded. # And unauthorized users
  # or access will be pursued to the extent of the Act. #
  # #
  ####################################################################
  
  Please advise if this is the case and if there is a solution?
  
  error message below:
  
  
  ERROR: std.err has produced:
  # # You enter in a private network. The use of systems and # or network may be monitored and recorded. Unauthorized users and # or access will be prosecuted to the extent of the Act. ## #####################################################################
  CONFIG_VERSION = $Revision: $115.426
  Host = haemt01.dataintensity.com
  DBA_USER = orhaegold
  APPS_USER = appval
  115_ADM = YES
  115_CM = YES
  115_WEB = YES
  115_FRM = YES
  DB = NO.
  .......

  Assistant Maintenance requires that none of the standard messages or guests are displayed when you log into the system. Please remove your standard messages so that when Maintenace Wizard registers in the system there is no exit to return to the tool. This can cause problems for analysis.

• How can I enable scan of the computer

  My printer tells me that my computer is not listed. How can I enable scan of the computer

  Hello

  Double-click the printer icon on your desktop.

  In the new screen, click "manage the scan of the computer.

  In the new screen tick the Automatic start scan of the computer...

  and click on the Activate button.

• OfficeJet pro 8500: Officejet 8500 scan of the computer

  I try to use the scan to computer option.  The scanner sends me this turn on my computer and I don't have the software and it can not find anywhere...

  This site has me fired everwhere and in circles.  The assistance Center has only notified me that I am not under warranty... I know that!  How can I get the software?  That's all I want.../cry

  TIA.

  Hello
  
  Thank you for using the HP forum.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/identify?q=8500+Pro & Tool = s-002 #Z7_3054ICK0K8UDA0AQC11TA930O2

  Please select your correct printer model, Win 10 people system and FULL of features before you download and install software.
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  How to scan to computer
  
  To scan from printer to computer, you need to install the printing software full of features first.
  Once you have installed the software,
  
  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3. make sure that 'enable' the Scan of the computer. Also check the tab "Automatically start Scan of the computer when I connect Windows" is to check if you want to have this feature permanently. (an example is shown below)

  

  

  Hope that helps.

• HP Deskjet 6700 Premium: Scan of the computer no longer works

  When I run a scan of my printer to the computer, I get an error message that says that there is no connection, or that the application of scanning the computer is currently in use.

  I can Scanner normally when you use the HP Scan SW initiated from my computer. I can Scanner normally the printer to a memory device to the printer.

  The HP Print & Scan Doctor SW says that everything is OK and day.

  Any ideas?

  Hello
  
  Thank you for using the HP Forums.

  YUO must ensure that you have the FULL features software installed first and then turn on computer scanning.

  If you have not installed the software FULL of features, the following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  How to scan to computer
  
  Once you have installed the software:
  
  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)
  
  Scan to computer

  If it does not, we suggest that you uninstall and reinstall the software features FULL.
  
  Hope that helps!

• 8710: 8710 double scan from the ADF

  Please help me understand if the HP OfficeJet Pro 8710 supports the double scanning from the document feeder. In http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA6-4026ENUC.pdf , is the line: "breeze through with double scanning multipage documents and an automatic C1900 of 50 pages (a single pass double scan 8730/40 models).  How is - a scan a stack of documents recto / verso on a 8710?

  For comparison, consider how the 6700 manages.   (A) on the computer, open "Scan HP."  (B) select "ADF." (C) place a check next to "Scan both sides (duplex).»  (D) place up to 20 originals in the document feeder.  (E) click on "search". (The ADF feeds the originals in the scanner.  On the computer, a pop-up scanning HP says: "prepare to analyze the other pages of your two-sided document.  To analyze the other side of pages 1. Remove the pages from the output tray.  Do not change the order of the pages.  2. without turning the pages at the wire, turn and place them in the document feeder according to the landmarks of placement on the device. 3. click OK when you are ready. ") F) after placing the originals rotated in the document feeder, click on 'OK '. (The HP scanning software stores the scan on your computer.)

  @gregspinney

  The technical data sheet information in small print:

  3 the single pass 50 sheets, ADF automatic duplex is available with only models 8730 and 8740. 8710 and 8720 models have an ADF 50 sheets of double mechanical

  While scanning two-sided "single pass" is not available on the 8710, it should provide an automatic duplex scanning.  The leaves should go through the printer, print one side, flip and scan the second side.

  Printer:

  All-in-one printer, HP OfficeJet Pro 8710 range

  Full software features:

  File name: OJ8710_Full_WebPack_1881.exe

• Office Jet 7612: Scan of the computer does not work after you win 10 improvement

  One of my clients has an officejet 7612 and has improved to win 10 to win 8 and lost the "Scan to PC" features themselves the printer he used for years to create his PDF files.

  Print and scan drivers seem to work to scan and print from the computer to the printer, but the printer software that was authorized to create PDF and JPEG of the scanner and send them to the computer doesn't seem to work.

  Is there any solution for this?

  Y at - it another way easy to make PDF files or is this feature lost with the upgrade?

  Shane Valcich

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-7610-wide-format-e-all-in-one-series/5153788/model/6879040#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  How to scan to computer

  To scan from printer to computer, you need to install the printing software full of features first.
  Once you have installed the software,

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3. make sure that 'enable' the Scan of the computer. Also check the tab "Automatically start Scan of the computer when I connect Windows" is to check if you want to have this feature permanently. (an example is shown below)

  

  

  Hope that helps.

• under Automatic Configuration of windows

  Hello
  Every time I run autoconfig on windows machines (remotely). I see it crashes at orainf.cmd.
  Executing script in Instantiatefile
  HOME\orainf.cmd 8.0.6
  
  Why this happens. Is - this different way to run autoconfig on windows machines.
  
  I am applying patch 5478710 . In the end, the patch is ruunning autoconfig and he was hanged here
  
  Concerning
  Taher

  Taher,

  It is expected (limitation of the OS) behavior that you should run the automatic configuration directly on the Server service - please see these documents for more details.

  Note: 393788.1 - Autoconfig gives failed Installation and then crashes
  Note: 260365,1 - Adconfig.cmd hangs when starting applications listener

  Kind regards
  Hussein

• Automatic configuration of the HP w17e monitor active at random

  Currently using an hp w17e flat, wide LCD screen connected to a NVIDIA 9500 GT video card located in a computer that is running Windows Vista Edition home premium (32 bit).  Running on 1440 x 900, 60 Hz frequency suggested by the insertion of the packaging of refreshment. Also in the 32-bit color setting.

  (Other computer stats available at http://www.compusa.com/applications/searchtools/item-Details.asp?EdpNo=4419976&sku=T71-3446%20ON&srkey=3000%20H210%2057088788)

  Tuesday night (13/10/2009) let my computer playing music with the monitor off.  Morning, Weds(10/14/2009) and any platform is off.  Turn it turn it back on and seems to update windows pushed a lot of updates.  Then I noticed the problem.  Randomly, the automatic configuration of hardware on the monitor turns on.  Tried different applications (games, firefox [windowed and full screen], or just sitting on the desktop), and the Automatic Configuration dialog box appears in the center of my screen and shakes the screen.

  Monitor checked button, it is not blocked (before this, don't think I hit a few months...)

  No change, I tried older drivers I had before the update of windows, still didn't try to update the NVIDIA drivers, arrives.

  Reset the monitor through the monitor menu.  Still happens.

  Reset the NVIDIA graphics settings, still happens.

  Installed the update optional windows update for the hp w17e LCD wide display.

  Monitor connection video Cable disconnected to the video card, checked pins, pins are good.  Reconnected.  Still happens.

  Tried to connect to another video on the port of the video card (always the same type of connection).  A reduced frequency, but screen looks flatter and more gray/less dynamic.

  She returned after swapping the video ports when I open the NVIDIA Control Panel.  Didn't jump once while typing this.

  Suggestions?

  Updated several days later.

  After the passage of the screen to the other video port on the back of the computer (vid card has 2 ports I could use, been using a) and disconnect / reinstalling the power cord on the monitor itself, auto config jumped just once shortly after reconnection of everything and not since.

  Weird and intrigues me, but hey, if it works now, will to run with him.

• Need any additional configuration to achieve the TAF in 11.2.0.4 CARS with listener to scan

  Hello

  We have 2 node RAC database version 11.2.0.4 running on the Linux platform.

  There are 2 earpiece SCAN running on DB instead of 3, which have generally taken over by oracle.

  When an instance brought as scheduled activity sessions that connected to the same instance, receipt ORA-03113: end of file on the communication channel.

  They were doing a select activity in db.

  When the user is reconnected, he got connected to the available instance.

  input TNS which users use (description = (address = (protocol = tcp) (host = p1bds1d4 - scan.sldc.sbc.com)(port=1521)) (connect_data = (server = dedicated) (service_name = p1bds1d4)))

  Do we need to do additional configuration to achieve the TAF in 11.2.0.4 with earpiece of SCAN.

  Must we change tns to include the clause as "FAILOVER_MODE = (TYPE = SELECT) (METHOD = BASIC)(RETRIES=180) (DELAY = 5)?

  Help, please.

  Thank you

  Ashish

  You can activate the side JOB effective by adding a clause like that you suggest to your connection, but in an GI envirinment channels you normally would by adjusting how the service is registered in the OCR. Run

  srvctl change service h

  and look for the-e and - m switches.

  --

  John Watson

  Oracle Certified Master s/n

• Impossible to connect a computer to the wireless network, I would like to first of all the automatic configuration service and I need advice.

  Article 861122 start WZC

  Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TX

  Hello

  • Are you referring to Wireless Zero Configuration (WZC) Service?
  • What happens when you start the automatic Wireless Configuration Service?
  • You receive an error message?
   
  If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.
  Click run in the file download dialog box, and then follow the steps in this wizard.
  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
   
  See also:
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

• How to enable the automatic configuration service in Windows XP

  How to enable the automatic configuration service in Windows XP

  Hi SamuelOkon,

  Are you facing any problem on your computer?

  You can follow the steps in this link & check if it helps.

  How to activate the Wireless Auto Configuration startup type?

  Hope the helps of information.
  Please post back and we do know.

• How to use the automatic configuration wizard and where can I FIND?

  How to use the automatic configuration wizard and where can I FIND?

  Hi TannySmedt,

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc