Printing of everything in my project.

Similar Questions

• How can I print my message of any project, rather than just the part of it that appear on the screen?

  I wrote the answer to a message I received. I need a copy of the project to show my partner, but my printer will only print the part of the project that can be seen on the screen at the same time. I've not encountered this problem. What needs to be changed?

  Your e-mail site has a "print" key to format the page for printing? Which often gives better results.

  If it just started with Firefox 4, it could be related to a change in the way strict Firefox is on the HTML code of the page. To see if this problem is caused by the new HTML5 parser, you can turn it off like this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the html5 and make a pause so that the list is filtered

  (3) double-click html5.parser.enable to toggle it false (it should turn "BOLD").

  Then return to your mail site, reload the page and retest. (Print preview may be sufficient for testing).

  Does make a difference? If so, the site is perhaps not yet fully compatible with Firefox 4 - or you have found a bug in Firefox.

• I have the new Windows 7 computer. Also have the HP office jet 5510 printer range. Printer does everything except printing color photos.

  Windows 7 Professional Dell computer. HP Office jet 5510 printer all-in-one. Just had to plug in printer for it to work because the drivers are automated by Dell and HP.

  Printer does everything but images printing color. Pics. out in black and white. I think I tried everything. This has happened since the new computer.

  Nothing to do with the printer that used to be useful on the old computer is left as the amount of ink etc. I printed everything in color. It's just the pictures.

  Hope this is enough information. Thank you. Muriel

  Origonally you posted this Q 13 and it came true.

  You have not installed according to the instructions of HP, but simply pluged in there. Follow the link to HP on the previous answer and install the device properly

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/HP-OfficeJet-5510-will-not-print-color-pics-on-my/e87896f1-53e1-443B-aa08-7c297e8e1259

• How can I set up the printer for ink black fast project only. I quickly defined project.

  Please show me how to set project fast, black ink only.   Here is not to have a printed black background.  uses a lot of ink at any point.

  Thanks for your help.  Yes, go to advanced and clicking on shades of gray to reveal the drop down menu worked for then change of 'no' to 'black ink only.  Why I missed it is that I have not seen any menu drop-down.  Had to click Grayscale to make it appear.  Maybe who want just that we use more ink, so that they can sell more.  Do you think?

• How can I set up my printer color Laserjet 1600 in "project mode" to save toner?

  HP Color Laserjet 1600.  An article in the New York Times today business section suggests that I put my printer in "project mode" to save on the use of toner.  How can I do this?

  The project is in an unexpected place: right click on the Color Laserjet 1600, printing preferences, and then click the finishing tab and put under print quality.

  

• HP Compaq 6715 b: perm of the changes to the print to HP Envy 5520 project

  Is there a way to set the project as my default for my HP Envy 5520?

  For Windows 7, click Start, devices and printers, right-click on the 5520 envy, printing preferences, select the options that you want, apply, OK.

• I want to print in the 2050 j510 project

  The project option is grayed out and I tried all sorts of permutations to change, but it will not change, is a ploy to get you to use loads of ink?

  Hello sandra090.

  I tried today with a Deskjet 1050 (the driver is basically the same).

  To change the print quality settings, you must click Preferences, then click paper quality / tab and you will see media. Change as a result of regular paper, Fast project quality - plain paper, normal quality and so on.

  The following radio buttons are disabled and will always look like Normal quality is selected, but you will notice the change in quality and print speed when you change the settings as shown above.

  Bravo!

• HP Officejet J6450 (Windows 7 64-bit) - page Test prints and everything is paper jam

  All,

  My Officejet J6450(All in one) was working fine and all of a sudden started showing paper jam. In fact, there is no paper jam, and the "Print Test page" print just fine. If you try to print something other than "print a test page", I hear the sound of rolling paper, the print head moves to print, then a pause and here is the error msg 'Paper jam' tried all the utilities and power off / on etc, but always the same result.

  Help, please.

  Thank you

  Hello

  Thanks for your reply and I solve the problem last night.

  The problem was updated spooler settings the: sort options changed to "print directly to the printer" and disabled the queue. I changed it to winding and everything works fine now.

  Thank you again...

  Bigosh

• Since your last update, text on all printed documents is too small to read. Talked to Kodak and it isn't my ESP7250 printer as everything prints fine with Internet Explorer

  I can't read whatever it is printed from the internet using your browser. The text is microscopic.

  First, try the printer reset described in this thread:

  Recently I can't print from Firefox after that update - can print from all the rest. | Firefox Support Forum | Firefox help

  Who help me? You can also check your scaling under file > Page Setup (if the old menu bar is not displayed, press F10 to call).

• Designjet 510: Designjet 510 starts printing, then everything stops and "blocks" no error messages...

  My normally reliable Designjet 510 suddenly started having problems printing: it starts to print my drawings, no problem, but it suddenly stops and just print head 'crashes' and no longer print.  He sometimes starts from the beginning of printing, he sometimes almost at the end of the drawing before it stops, but he can't seem to finish the print job.  The printer does not display an error message, it still shows that it is printing, but no matter how long I leave, it will not at the end of a drawing.   I'm on Microsoft Windows 10 - there was a hiccup when I upgraded Windows, but after reinstalling the printer driver, it seems to work again no problem.  I'm tearing my hair out (and lose large amounts of paper) trying to get anything to print!  Pointers would be welcome.

  Thank you.

  P.S. I posted this problem previously, then thought I had sorted by adjusting the settings of the printer, but she went back, and I am no closer to knowing why!

  How is the printer connected?

• How to enlarge the size of print on everything

  The size of the letters I type are large enough, but when I go to type an email

  the print size is so small that even I can hardly read it. What to do to fix this?

  Hello

  I suggest you follow the steps mentioned below.

  a. go to the web page you want to print and then right-click. Click on "print preview". If you want to print the page, highlight the content you want to print and right click on the selection. Click on "print preview".

  b. click on "Page Setup" icon located at the top of the preview window before printing to start the Layout dialog box. Click on "change the font.

  c. Select the size of the font to use in the window "size". If you want to change the font type, make your selection in the window of "Police". Click 'OK' to save the changes and click "OK" again

  d. turn on your printer if it's not on. Click the 'Print' in the preview window before printing to print your web page.

• Aligning the print cartridge HP Photosmart C7280 Print failed - prints in everything but black

  When I print, it comes out in pink/red.

  I bought all new ink cartridges and done a master reset and I still get the error that does not have the print cartridge alignment.

  Hello

  Please try the step and then try alignment process listed below.

  on the screen of the printer.

  1. Press the key SETUP (key), then
  2. Then press TOOLS,
  3. Press the CLEAN print head / cartridge.

  Make sure that the ink cartridges should be at least 25% full.

  Note: you need to repeat the above steps 2 - 3 times.

  If issue still persits, it could be a defective black cartridge or print head. In which case you could call the HP Technical Support for assistance.

  If you are in the United States, the toll free # is 1-800-474-6836.

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• Photosmart 8150 disorder - Microsoft Word print black, everything is RED

  Hello

  My printer prints ONLY red in all programs except Microsoft Word. It prints only red in PowerPoint, Excel, Preview (PDF format) and Web pages. I tried out the color cartridge and having only one black; pages through the printer and come out blank. I tried to do black and white or grayscale settings, and it still comes out red. I cleaned the cartridges and printed tons of test pages. The test pages are always correct.

  I spent hours combing internet for more information about printing HP Photosmart 8150 in red by default in all programs EXCEPT Microsoft Word, but I have not found anything. I talked to Tech Support Applecare and we have reinstalled the printer driver, reset the printer to my Macbook settings and still cannot solve the problem. They told me to contact HP. I've had the printer for almost 5 years so it is old.

  If anyone can help please respond. I'm on Mac OS 10.5.8 with a 2.4 GHz Intel Core 2 Duo processor.

  Thank you

  Spartanlia

  I think it's a software problem.

  Let's start with a reset of the print system:

  -Sys Prefs, Print & Fax
  -Right (Ctrl) click the box of the print queue and select Reset Printing System.
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If this does not work, uninstall the HP software like this:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Finally, reinstall the software from here.

• I want to restore the size of normal printing for everything on my computer. I tried using the page (text size) and it did nothing, can you help me?

  text size problem

  I'm not sure what means 'normal' - I assume that means you had recently but has changed.  Do a system restore to a point at the time the text was the right size and format you want - BEFORE it changed to what you don't want.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days worth of restore points.  If this does not work at first, try a previous restore point or two.  NOTE: You will need to re - install any software or updates installed between now and the point of restoration - but you can make updates through Windows Update.

  As an alternative, you can go to start / Control Panel / customization / display settings / and set the resolution to a different setting.  Click on apply, and it will ask you if you really want to change based on what you see now.  Click on your answer and either output or try another setting.  It is a more difficult way to do a system restore because it is difficult to choose the same size you had before.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• My printer prints everything too small and landscape. It also doesn't let me choose Properties?

  I try to print on my printer and everything is too small and landscape. It doesn't let me go to properties when I'm ready to print?

  Hi KEVIN KATEMC * DONOUGH,.

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the question with the printer prints everything too small and landscape and not able to choose Properties.

  What is the brand and model of the printer?

  Did you change to the computer?

  This problem only occurs with this application?

  I suggest you to follow the steps and check.

  1. click on printer properties by clicking on the printer and select Properties.

  2. go in the general tab, and then to the bottom of the window, select Printing Preferences.

  3. in the next window remove the button called advance.

  4. in the eyes of graphics for scaling article. If you do not set to 100%, that might be your problem. Change to 100%, and test.

  I also suggest you to see the links and check.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  You experience problems when you view the printer properties in Windows XP or Windows Server 2003

  http://support.Microsoft.com/kb/922975

  See also:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows