VISA series and MCC USB-ERB24 compatibility problem

Similar Questions

• VISA series and the time elapsed in a timeout

  Hi people,

  Still new to LabView, please bear with me...

  I have a VI that is sitting and wait a certain string of characters arrive on the port series, but I need a timeout that is not based on the VISA expiration time.

  I expect a bunch of text via the serial port for ~ 45 seconds, then my input string will compare the matched string and move to the next VI.

  In case of no matching strings, the serial port can continue to send data serially, or may be inactive (no-determinisitic because this test is to see if a computer system started successfully). But once the VI starts, I should have 60 seconds to find the match, or set the bool 'selection' to fail.

  I tried to put my loop of time inside the main loop, outside, with or without SRs, and now I am at a loss. I looked at the VI has highlighted and the serial activity is active the timer has expired for 60 seconds.

  Please take a look at the joint and thanks for taking a peek at this post.

  I'm not entirely sure I understand what you are trying to accomplish. However, here are my thoughts:

  1. You have attached the VI waits 60 seconds before checking the serial port for waiting bytes ONCE then read bytes if available and leave immediately. It's because you have while the loop around the elapsed time and it should run completely before moving on to the serial communication loop.
  2. I assume that you have configured the port series and characters of endpoint set, etc. in a main vi
  3. Please try the VI updated seal and let us know if this helps

  Thank you

  Charles Chickering

• I can't install VISA driver and driver USB GPIB on my PC with VISTA... help me...

  I have LabVIEW7 and VISTA, it's ok, but I can't install the driver VISA and USB GPIB driver on my pc... it is necessary to connect my pc with instruments? Or LabVIEW7 have this files? Thank you

  Véronique.

  LabVIEW 7 is not supported on Vista and the version of NI-VISA supplied with LabVIEW 7 is not supported. You can download the latest version of NI-VISA - I ALREADY GAVE the link for you.

• How to connect USB-ERB24 devices to labview application

  Hi iam, iam new to labview application development using NIUSB-9421 as module input and USB-ERB24 in the output module. I have sucessfully added NIUSB-9421module to my application using 'Digital IO DAQmx create Virtual Channel.vi'. But cannot add this module USB-ERB24 iam. Can someone please tell me how to detect "USB-ERB24" this module for my labview application please tell me...

  I don't think that you will be able to use DAQmx with MCC USB-ERB24. You must run InstaCal (driver of MCC) to install the USB-ERB24 and get a card number for this unit (and build your application with the MCC screws).

  

  I have LV2009 and I'm not able to open your USB_ERB24_test.vi.  The attachment is for USB-ERB24.

  Jean-Marc

• Neverwinter Nights Diamond windows compatibility problems

  Origianal title: Neverwinter Nights Diamond works with Vista?  If yes how to operate?  It works with Windows 7?  If so, how? Thank you

  Finally after many years and several accidents have completed Baldurs Gate II and Throne of Bhaal.  Bought Neverwinter Nights Diamond pack 2 years and finally able to load - surprised a compatibility problem does not work.  Even my Baldurs Gate II and Throne of Bhaal worked.

  Hello

  Once I was able to downloadand patch and then run the compatibility problem solver in the programs control panel

  Make older programs in this version of Windows

  I was able to get the game running in Windows 7 and Vista.

  Vista I deleted the shortcut on the desktop, as I had it already installed before finding the compatibility issue.  When I installed Windows 7 I chose not to install the shortcut - according to a thread I had followed.

  The most difficult thing to solve the problem was to find the patch. I can not even find the page it is on, but when I typed

  Installation for Win7vista NWN1 includes links patch - the right page came

  I'll try and copy and paste the link into this but do not know if it will work.  This is the file you need with never Winter Nights Diamond toget it works.

  http://files.BioWare.com/neverwinternights/updates/Windows/English/NWNEnglish1.69HotUUpdate.exe

  The forum was http://social.bioware.com/forum/1/topic/187/index/3341490/1 , although I wasn't able to get the intothat by typing.

  The patch downloaded and installed very easily.

  After you have installed the patch, I ran the "make older programs run in this version of windows" - using XP service pack 2 (Vista) and either 2 or 3 in Windows 7.

  It's located under Control Panel - programs - but I think that the classic view.

  best regards to all the help on this forum

  Wendolyn

• Problem by acknowledging an instrument in series with a USB adapter in NIMax

  Hi Forum,

  I have an instrument designed to be controlled via a signal with a RS232 cable series and I try to get NIMax to recognize and send test orders.  My laptop (running Windows 7 Enterprise) has no serial port so I use a USB adapter to connect.  When I could not initially the device appears, I searched online and find suggestions that I should install the NI-VISA driver.  I downloaded and installed, but it does not help - to open VISA test panels is greyed out and it indicates that the unit is 'away' even when it is plugged.  When I open the control panel interactive of VISA directly, the device appears as a question mark, and if I double click top, it says the following:

  Error opening resource:
  ASRL10::INSTR

  VISA: (Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system.

  Any thoughts on how I can get my PC to communicate with the device?  Thanks in advance for your help.

  Erica

  

  EricaK wrote:

  Thanks for the tip, I didn't know that I needed to install a driver for this.  Do you know if a general device like this driver will work.

  You need to install some drivers Windows are necessary for your USB-serial adapter (should have with the adapter).  Once Windows detects the serial port will be MAX.

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• Mcc usb 1208FS for labview 10.0 connection problems

  I have version 10.0 of Labview installed on windows XP computer. I want to connect MCC USB 1208FS for Labview. Not able to see the device MCC in device of measurement and Automation Explorer interface. It appears? Please let me know the steps to access the device of the MCC in Labview.

  I can see the MCC card detected in the software InstalCal of MCC supported. I installed the latest version of the CMC the CMC site software.

  As far as I know, you will not be able to see physical computer as in MAX.

  From the file of help from MAX: "Measurement & Automation explore (MAX) allows to access your National
  Instruments of devices and systems. "that is material MCC is not a feature of National Instruments.

  Why not stick with the InstaCal software and the MCC screws provided?

  Ian

• X 220 and Mini Series 3 with USB 3.0

  Hello

  I am recently received a Mini Series 3 with USB 3.0 for my laptop company ThinkPad X 220 Windows 7 64 bit.

  However, after installation of the USB 3.0 driver downloaded from the Lenovo Web site, I still do not see USB 3.0 in my Device Manager device.

  I have also some test using an USB3.0 external HDD but the USB 3.0 port seems to have exactly the same speed as all the other ports.

  How can I activate USB3.0 on this Docking Station?

  Thank you

  Jeremy

  ThinkPad X 220 with i7 (i3 and i5 has usb 2.0 ports only) has a single USB 3.0 port, but the way it is connected through the motherboard, it is unable to support port additional usb 3.0 from the dock.

• HP Pavilion DM3 1100: HP DM3 1100 hybrid series and Windows 10 compatibility chart

  Hello!

  I am running W7HP x 64 on my DM3 of Pavilion with hybrid graphic system (Mobile Intel 4 series) and GeForce G105M. I'm worried because I'm not sure that the hybrid function works - which means that it will pass graphics cards according to the source of power and power management.

  Can anyone confirm that the hybrid function works or is there any other app/trick/hack that I can use? I need discrete and integrated graphics to work when I'm connected to working with graphics applications (editing photo or 3D modeling light).

  1 million thanks!

  Scratch higher response! I did the job! I downloaded driver win 7, began the installation so that the files were extracted to the SWSETUP folder, leave the installation to finish in normal mode (no compatibility mode). At this point, there is no difference. Then I restarted my laptop and opened Device Manager and updated the driver manually selecting the inf file in the subfolder SWSETUP. I then did a bit of fiddling around with deactivation and activation of integrated graphics card Intel and all of a sudden, the LED TV light on and there was the desk! Although the resolution was not standard full HD, but something more small to 1680 x 1050. Disconnect and reconnect the HDMI Cable causes the actions required, which means that the laptop screen turns on and turns off properly.

  I hope it'll work with my desktop LCD screen to... :/ Will report!

• I can't open sites in a link. I had the same problem with another site and it's the compatibility tool but I check that and I am still unable to open

  I use vista, some updates have been loaded and now I'm having problems to open a link in a Web page.  I had this problem before and it was the compatibility tool but I check that and it still does not work.

  Go to control panel | Internet Options | Programs and IE set as the default value.  If this does not work, then go to control panel | Default programs | Associate a type of file or Protocol with a program and then the page down to HTTP and HTTPS protocols and associate them with IE.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I use vista, some updates have been loaded and now I'm having problems to open a link in a Web page.  I had this problem before and it was the compatibility tool but I check that and it still does not work.

• I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key...

  I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key. How will I know about the activation key if I don't have the CD? and he really gets on my nerves because very 15 minutes it would display the message that I need to activate the key making delays in my work.

  Hi Kia,

  We apologize for the inconvenience caused to you.

  I wish you contact the Sony Support to reactivate the windows because it's preinstalled software.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=FAQ

  Please reply with the status.

• VISA series 2012

  Hey all,.

  I worked with LabVIEW 2011 to develop a program to drive a motor via the VISA series block. I've updated since for 2012, and I had problems to get the LabVIEW program to reward the engine. I have a 3rd third-party program installed that I can use to send signals of the motor base, so I know all drivers are installed correctly and there is no communication error between the engine and the computer controller.

  Anyone had this problem before? My suspicion is that there may be a compatibility problem with communication between the versions of labview 2011 and 2012 series.

  Any help is greatly appreciated!

  Hi Phil,

  Thanks for the screenshot. At first glance, it doesn't look like something fishy is going on. That being said, let me know when you run the example of shipping if you are able to see the available COM ports.

  Another thing to check is to bring visa installed on the new machine. Under the record of National Instruments, you can check in your Start menu. If it isn't there, you can download it here http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav: of, n8:3.1637, ssnav:su... . Also you can check and see if the COM ports appear in measurement and Automation Explorer? Let me know if one of these suggestions solves your problem, otherwise we will continue troubleshooting.

  Thank you

  Doug W

• HP laptop laptop 15-ay019tu: shortcuts keyboard and HUB USB 3.0 driver is missing, I can not find anywhere then please provide some suggest

  I tried to install drivers in my new pc and I almost did. But I can not find the driver HUB USB 3.0 (that is listed as "unknown device").

  Another problem in the function keys. They do not work. So I need to install the driver of access keys

  I have tried many on the internet until now, I can't able to find drivers for my computer so please suggest a useful site to download the two drivers.

  Hello:

  For the question USB 3, download, unzip and run the file setup.exe from the link below.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

  See if installing this software gets the Fn keys to work.

  This package contains the HP System Event Utility, which allows the special function keys on the laptop to program models. For example, HP System Event Utility allows users to press the Fn + ESC keys to view system information. This package is provided for the supported models running a supported operating system.

  http://ftp.HP.com/pub/SoftPaq/sp76001-76500/sp76383.exe

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.