Visibility of button control

Similar Questions

• Satellite M30X S214: CD button control does not work

  I have a Satellite M30x S214 and I do not have the drivers for the CD-DVD button control.
  Please I need the drivers CD control button.

  someone help me?

  Have a look here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  and reinstall the utility called Easy Button.

  concerning

• The button control for CD - DVD on Satellite M70-166 does not work

  I don't have a model Satellite M70-166. PSM71E and the CD-DVD button control does not work (up to a few days ago it worked...).

  can someone help me?

  Thank you!

  Try to roll back OS to an earlier time using System Restore utility. If this does not help please let us know.

• Reset button control

  Can I reset a button control programmatically?  Specifically, I'm eager to pass a Boolean button to a false state in response to certain events or conditions.

  For example, consider the attached VI.  (It's not over, because I don't know how to finish.) The user can perform the meter count by clicking the County.  What I want to do is stop the meter to a number (10) and reset the Count button, so that the user must re - click to see a new count.

  It's one of those moments, some additional functions can be your friends.

  Events, property and feedback nodes must be loaded in a Developer Toolbox ready to replace the 'screws-Hammer"when there is a better tool.

  

  Count value change event to choose-1 or 100 for timeout

  Change of stop value sets the exit condition

  I've renamed Count (I32) charges since its not very good to have two objects with the same label

  EDIT:

  I think he wanted the "Count" button stay down - I read that too the real channel is always Local "Metering" is less desirable as a Val (Signalling) can be beneficial in this case

• Unistall button control panel says that the Setup log file is missing.

  I have been using a registered version of Lightroom 5.4. I tried to uninstall it but the button control panel uninstall produced the answer that the Setup log file is missing and it wouldn't uninstall. I tried to delete all the files in and then put it back, hoping that he might happen to remove or repair. I have now two versions of 5.4 64-bit showing in Panel, neither of which I can uninstall. Help please.

  The uninstaller entry in Control Panel is created by an entry in the register. Remove the registry key will remove the list. This is normally done by the uninstallation process, but because quite simply, you have deleted the files, he left the info record behind. As shown here should clean your registry: solve the problems that the programs may not be installed or uninstalled

• Click on the button control symbol Manager feature

  Hello

  I have a picture of remote control that has 2 buttons (button slide & graphical button bar).  With the help of resdesign , the first button controlling a slide show of 15 images works.  In the show, there is question slides that should launch a symbol of motion graphics bar showing the results.  I am able to launch the first chart bar to slide 3.  I use the container method to place the graphic bar on the stage.  The graphic symbol bar can be closed using a click event in the symbol.   Here are my questions:

  1. How to toggle the bar graph off OR remove the graphic barcode symbol when the graphic bar button is clicked again.
  2. How to prevent multiple instances of the bar graph to launch in the container?
  3. How to close the bar chart, if the user moves to the next slide?

  Here's the code to control the button of the bar graph on compositionReady:

  bgOn var = false;

  {sym.$("buttonbg"). Click (Function ()})

  If (bgOn == false) {}

  sym.createChildSymbol ("bg1", "bargraph_container3");

  container var = sym.getSymbol ("bargraph_container3");

  SYM. Container ("BG1"). Play();

  bgOn = true;

  }

  else {}

  SYM.deletesymbol ();  If graphic symbol bar is already activated, when buttonbg is pressed again then delete 'bg1.

  bgOn = false;  back to false, click will revive "bg1.

  }

  Here's the project file.

  http://DL.dropbox.com/u/10647145/necc_viewer_nov2012.zip

  Thanks for your time,

  -Robert

  ==> the file attached.

  (1) symbol 'stage', compositionReady:

  sym.bgOn = false;

  {sym.$("buttonbg"). Click (Function ()})

  If (! sym.bgOn) {}

  SYM. BG1 = sym.createChildSymbol ("bg1", "bargraph_container3") .play ();

  container var = sym.getSymbol ("bargraph_container3");

  Container ("BG1"). Play();

  sym.bgOn = true;

  } else {}

  SYM. BG1.deleteSymbol ();  If graphic symbol bar is already activated, when buttonbg is pressed again then delete 'bg1.

  sym.bgOn = false;  back to false, click will revive "bg1.

  }

  });

  (2) "bg1" symbol, close.click:

  sym.getParentSymbol("bargraph_container3").getParentSymbol ("step") .bgOn = false;

  sym.deleteSymbol ();

• Browse the button control in flex 2

  Hello
  I'm looking for a button control 'Browse' in flex 2 so that my application is able to download files.
  Does anyone know what type of control used to upload files in flex 2?
  See you soon!
  
  

  Examine the FileReference class.

• make a visible top layer invisible for buttons / controls on a layer below.

  THE PROJECT

  I have 3 layers in a CS3 project, in the following order:

  -top Layer (layer semi-transparent Vignet and some additional graphics, all of this is contained in a loaded dynamic mc)

  -Middle Layer (the content that contains the navigation and content. This charge dynamics)

  -Background (it contains a screenfilling background image, and a few graphic alements, all of this is contained in a loaded dynamic mc)

  THE PROBLEM

  The top layer off the dynamic content blocks because its more of it.

  SOLUTION

  Dynamic turn off the layer top, so doent flash use it anymore.

  I want to keep it visible, but not accessible for any mouse action.

  Must be kept below visible dynamic content for interaction.

  I hope I described it quite clear, if someone can give me the solution.

  I gues it is some attachment real simple code.

  Thank you.

  I did a quick exaample the demo with a layer of something on top of a layer of controls and disable it to interfere with the commands below.  For this example, the lean rectangular area is the layer of Vignet who stands on a button on a layer underneath - I threw it in a background layer too, just to cofuse eyeballs, I guess...  When you click the button, it allows the Vignet layer so that it blocks the button and clicking on it it turns off again... just a variety of liuttle of commands that may be useful to you at some point.

  If you can let me/us know whow you file is different, then perhaps it will be easier to identify a different solution if one is necessary.

  http://www.nedwebs.com/Flash/vignet.fla

• Show/hide multiple Button controls increment/decrement is AWOL

  As far as I can see (LV 2013), there is a missing feature in LabVIEW, whereby, when you select multiple digital controls, you can't show/hide their increment/decrement buttons:

  

  Here, I have 3 DBL, 1 I32 and 1 enum, but that goes for any combination of numeric values. If I right click on one of the selected controls, I have access to only two points in the title of the "visible Points":

  -Label

  -Legend

  Where is ' Increment/decrement' part, whereas it is common to all these controls?

  BUG? I couldn't find it mentioned elsewhere, but I would not be surprised to be the first to have noticed.

  
  

• I would like to move the button reload of the address bar. I also have a visible 'next' button and the back button.

  Simple as that. Because I have OCD, it is extremely unpleasant to have both forward and back buttons is not always visible. How can I return to this appearance?

  I also want to separate the button reload of the address bar, as I had before the update. I'm reloading of pages often enough and have the button smaller and in the address bar, it's... a little counterintuitive.

  Ideally I would have ordered it, from left to right: back, forward, reload, address bar.

  Firefox has always been very friendly and very customizable. A few hiccups here and there, well sure, but you can usually get what you want to do, one way or another. So can you guys help out me? It drives me crazy. I installed classic restaurant theme, and it does not change that I can't do now.

  The classic theme restaurant has a very rich set of features and options can be difficult to find. I think that those you want is in all of the check boxes under 'UI General"as shown in the screen shot on the site of modules:

  

  Note that 'Mobile back-forward button' is on, and "Combines stop & reload" is disabled. It works for you?

• Equium M40X: Buttons control Toshiab and iTunes

  Hello

  Is it possible to get the audio material on the left of my M40 buttons to control iTunes? I can put the big button (with the CD icon) to launch iTunes, but the play/pause, stop, forward and back buttons do nothing.

  I have the tab buttons SETTINGS of Toshiba for the iTunes link, but the multimedia applications tab lists only WMP as an option.

  Thank you

  Mark

  Mark

  Unfortunately, I n t think you can define the function of the buttons to the 3rd party software.
  I think that a fixed and CD audio control settings is set to WMP and DVD video WinDVD control.
  The buttons should only works with these two applications.

• Satellite A300 - Toshiba 1 3 - button controls do not work

  Hello. I have a problem of analog.

  Satellite A300 - 1 3 purchased, installation Winxp and sensitive buttons off value left for work. Today, I'll try the Bios version to check, but doubt that it influences it. Nothing is really present official Toshiba?

  I'm sorry for my English

  Hello

  This is a user to user forum and I doubt that you will receive something official of Toshiba. What you get are a few suggestions a user cell phone like me and you.
  A300 - 1 3 belongs to the series of PSAG0E (I hope).

  See European driver of Toshiba. Choose this model of laptop and reinstall the common Module

  In addition to install the Toshiba * controls * that you might find in * PSAG8E * series!

• Satellite A100-487: pointer speed & button control buttons have fallen alarmingly

  In the last two or three days keys cursor/pointer speed and control have dropped alarmingly.

  Also the icon in the system tray Tracker does not always record the touch pad is used, and what is normally when the speed drops.
  The pointer moves on the screen very well, but there is a significant delay to the derivative of the target or get any response to a click on the buttons when it is.

  I suspect a virus of some type, but after running Norton, Hitman Pro and Webroot Spyware I have found none. Can anyone suggest a possible cause/remedy please?

  Hello

  Have you noticed a full CPU usage while the cursor/pointer speed and control buttons have declined?
  Sometimes my answer mouse doesn t or moves slowly because the processor running at 100% and should run several background processes.
  Of course, a virus or malware could use rate increases the CPU at a higher level.

  I've noticed that Norton does not recognize some virus or some potentially dangerous files are not known to Norton Antivirus.
  For several months, I have been using the freeware AntiVirus program. It of fun and free!

  But maybe it's not a virus problem, but just something wrong with the system files and drivers of s.
  In this case, I would recommend reinstalled the common modules, touchpad driver/utility and Toshiba controls.

  In an enterprise value you need to reinstall the whole OS from the Toshiba Recovery CD!

  Check it out

• Button controls works only not on Satellite A60

  The controls on my A60 buttons no longer work. I tried to reinstall from CD, but I get a message saying that I have to uninstall and reinstall. I tried to uninstall via Add/Remove Programs, but appears not to have worked, the element of control still appears in the list even after a reboot. Does anyone know how to solve this problem.

  Thank you in advance.

  Try also reinstalling the common modules.
  Don't forget to restart after removal of the first version.

• Volume buttons control only the ringer volume

  It seems that the volume buttons on the side of the phone just control the ringer volume. On other Android phones, ringtone and Notification volumes have been linked together for ease of use.

  On the Droid Ultra/Maxx, there are four different volumes: media, ringtones, Notifications, and alarms. And none of them are interconnected. It is extremely annoying for many reasons, the main reason being there is no easy way to lower or increase the volume of ringtone and Notifications at the same time by using the volume buttons.

  The ring volume is adjustable to the max, but the text message sound will be very quiet. Or the ring volume can be set down, but text message noise will be very strong.

  Is it possible to fix this?