Button controls works only not on Satellite A60

Similar Questions

• Shortcut keys work only not on Satellite 1800

  Hello

  just started place & my 3 quick access keys work! entered in the "toshiba controls", "internet" & "outlook" are assigned to the keys 1 & 2 but nothing happens when you press. clues? I have re-installed the driver controls by but once again not good
  deploy the satellite 1800-412.
  curious...

  Hello

  First of all, you should check if the buttons are selected. (Is selected)
  Then check if the option has been selected for the simple buttons.

  Very important is the installation of the common modules. Without this additional demand it possible s Toshiba controls will not work.
  You must install first the common modules, then the controls.

• Installation of the graphics driver working only not on Satellite C640

  I have the Satellite C640. While I was downloading the drivers, installation of the graphics driver does not work.
  My resolution is also maximize up to 1022 X 768, where, as it should be 1366 X 768.

  If anyone can help me solve this problem?

  Hello

  First of all, I would be nice to know some basic details:
  -What C640-xxx you have exactly?
  -What Windows operating system you are using?
  -Do you use with OS preinstalled by Toshiba?
  -Have what graphics driver you tried to install (from Toshiba or other pages?)

  Satellite C640 was equipped with different graphics chips; Intel, ATI and nVidia did you try to install the correct driver?

• Shortcut keys work only not on Satellite M35-S456

  I have windows xp pro installation, and my shortcut keys do not work? Please, I beg you. (I installed the hotkey software)

  Hello

  I put t know how exactly American books, but please do not forget that you have installed the common modules first. This is the basic tool and must be installed before you install the other stuff of Toshiba.

  I also hope that you download everything you need from the download page

• "Messenger Service, or the Net send command not working only not on the service remote computerhe.

  Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
  operating system is windows xp
  service pack 3

  Hi Charbel,

  Have you done a recent software or hardware changes to the system?

  This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.

  Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.

  Please refer to the article to define the service as automatic:

  Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2

  For more information, see the article:

  The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• The button control for CD - DVD on Satellite M70-166 does not work

  I don't have a model Satellite M70-166. PSM71E and the CD-DVD button control does not work (up to a few days ago it worked...).

  can someone help me?

  Thank you!

  Try to roll back OS to an earlier time using System Restore utility. If this does not help please let us know.

• iPhone 6s 9.3.2 bluetooth doesn't always work only not with the control system of Mercedes

  Connection Bluetooth iPhone 6s with Mercedes control system does not work with version 9.3.2.

  (Last worked with 9.3).

  Hello..

  On your iPhone, tap settings > general > reset > reset all settings , and then restart your iPhone and then try Bluetooth with the control system of Mercedes.

  * No data is lost due to reset

• Satellite A130: Fn key not working only not with Vista - only FlashCards

  Hello

  I've been looking around in the forums, but I couldn't find solutions to my problem.

  I have a satellite A130 and I am running a windows VISTA family Basic. I have a problem with my fn functions.
  I can only use flash on the top of my screen cards, just by dragging my mouse upwards on the top of my screen.

  The key works only when I start my computer, at startup, but when the computer is running, there is no other "fn", I could use but my mouse to show my flash cards and use them.

  Is there something else I could do?
  Thank you

  I have same situation, remove the starting windows for the form Flash cards and you have no pictures at the top of the desctop, but keys will work.

• Audio & CD/DVD drive not working only not with Vista

  I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:

  1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
  2 > drive CD/DVD is not visible in 'my computer '.

  These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...

  I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3550002

  Any help to solve these problems is much appreciated... Thanks in advance

  Hey riri,.
   
  Try these steps and check the result.
  Step 1: Delete the invalid registry keys
  1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. in the navigation pane, find and then click the following registry subkey:
  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, click UpperFilters.
  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
  4. in the Edit menu, click on delete.
  5. When you are prompted to confirm the deletion, click Yes.
  6. in the right pane, click LowerFilters.
  Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
  7. on the Edit menu, click on delete.
  8. When you are prompted to confirm the deletion, click Yes.
  9. exit the registry editor.
  10. restart the computer.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in Windows
  Step 2: Uninstall any software CD/DVD burning.
  1. Click Start, type appwiz.cpl and press to enter.
  2. from the list of programs, select CD/DVD burning software and click on uninstall.
  3. once the uninstall, restart the computer.
   
  See Uninstall or change a program
  Step 3: Install device drivers in a new user account.
  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on create a new account.
  
  4. type the name you want to assign to the user account, click an account type, and then click on create an account.
   
  See repair a profile user corrupted

  See also device in Windows Vista drivers

  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Video effects work only not on sequences embedded in first Pro CS5

  HI -.

  I am having trouble with the first ProCS5. I have a project with a few clips I put together in a sequence. I put this sequence in another sequence. Here, I'll add one or two tracks of additional images and apply the color correction.

  The problem is: no effects video I drag the sequence (which is now a nested sequence) has no effect. What I change in the effect control will sho not upward in the monitor. Audio effects do not work, though. In addition, none of the tracks above the nested clip are displayed. To clarify: the nested track is on V1, another clip is on V2 and V3 is a picture. Only V1 is displayed.

  I know that it is supposed to work, and it doesn't in another project created in the same version on the same machine with the same kind of material. But no matter how many times I create a new project, just the application of video effects to a nested sequence does not work.

  Even more strange is the fact that my applied effects appear in the "export settings" window. They do not, however, in the final rendered file. I'd say it's a bug.

  What could be the reason for this behavior?

  You use acclerated CUDA/GPU rendering? If so, what happens when you change the rendering mode to your software only project?

• Do not write satellite A60-672 DVD-R/RW

  Hello

  can someone help me I just receive a satellite A60-672 when I try to write a dvd that he will not write one that I tried an audio drive, he writes very well on that told me that he will write on DVDs, the writer is a pioneer dvd - rw hard-k13a im new on all this hope you can help thank you

  Hello

  What burning software do you use? I use Nero software to burn and there is option where you can choose on which way must be written (CD or DVD). Please check is somewhere on the software that you are using the same option.

  Also, you should contact the seller a DVD Writer what the writer can write? Or you look at the homepage!

  Good bye

  [Edited by: admin]

• HP LaserJet M252dw: Airprint works only not on HP LaserJet M252dw

  We have a HP Color Laserjet M252DW in our business that we intend to use Airprint for printing from our Mac machines, but we cannot make it work.

  We use a Cisco wireless with a 2500 WLC. We have configured mDNS and are able to see other printers, but not the M232DW.

  What we have tried so far:

  > Search for the firmware updated (not available)

  > Reset the printer and reconfigure

  > Use the static and DHCP IP addresses

  > Restart the printer, WLC and Mac devices

  The printer is connected to the same network wireless as users. As I said, Airprint works on other printers, it works just not on this one.

  Any ideas of what I may be missing or what I can try?

  Hello

  I got to work. But only after I reset the default printer and it reconfigured.

  I needed to configure mDNS on Cisco WLC, then after I reset and reconfigure the printer, it took a little time to see the recording on the WLC and for Apple devices pick up (about 5-10 minutes).

  It took that long only for this particular model because the other HP printers have been detected immediately, but those are wired, however.

  To accomplish the same thing for devices Meraki see the following link.

  https://documentation.Meraki.com/Mr/Other_Topics/Configuring_Bonjour_Forwarding_for_the_MR_Access_Points

  Let us know if that helps. Just know you may need to reset your default printer, reconfigure, then wait a while.

  Sachin

• validation of single key works only not with the update

  Hi all

  I use jdeveloper 12 c on windows internet explore.

  I'm at the following link

  http://www.gabrielsideras.com/2010/09/28/ADF-unique-key-validation/

  It works only if I insert new records. After the update, it does not work. He leaves me no update.

  How to work around it please?

  Kind regards.

  User, tell us your exact jdev version, please!

  It works if yo udefine the unique key in the DB?

  Timo

• Captivate swf issues navigation - buttons sometimes work, sometimes not

  I have a single file Captivate 5.5 with 100 + slides. I have the back and buttons next on most of the slides, as well as navigation buttons to slides of early for the various sections in the module.

  Some nav buttons work well all the time, some never work right and some are intermittent - sometimes they work, sometimes they don't. When they do not they either go to the wrong slide, nothing happens.

  I'm puzzled why this is happening. The properties of the buttons that work are identical to those that are not. It is possible that I have slides quiz grouped throughout the module. I wonder if the problem might be related to that.

  Any ideas?

  -Stuart

  Hi Stuart,

  The malfunction buttons are placed on Quiz slides?

  Can you copy and paste all the slides to a new empty project at the same resolution and republish that. (Note, you must deselect the result Quiz slide before copying, as it can ' be copied)

  Do see you the project locally or on LMS?

  Thank you

  Anjaneai

• Screen Mode shortcut not working only not with the recent update

  Since the update to the latest version of the CC a few days ago, my shortcut to toggle mode screen (F) does not at all. I tried to reset my preferences and I checked my preferences of shortcuts - but nothing seems to fix the problem.

  Any ideas?

  Well, I finally got it working - but not quite how. A combination to reset the preferences, parameters of deleting and re-installing Photoshop. Although I had to reinstall twice before, it made a difference.

  In any case, fixed now fortunately! I appreciate the help.