Equium M40X: Buttons control Toshiab and iTunes

Similar Questions

• Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Windows Media Player help

  I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Hi Rains27,
   
  1. were you able to play the same DVD sooner?
  2. must arrive with a particular DVD or all of them?
  3. do you have a DVD decoder installed on your computer?
  4. you use starter edition of windows 7?
  5. What is the resolution on your computer?
  6. have you installed a codec on your computer?
  If you have installed a codec on your computer the I suggest you to uninstall the codec.
   
  Method 1:
  Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
   
  Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
   
  Troubleshooting, click View all, and then click Windows Media Player DVD.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
   
  Method 2:
  
  
  
  Play a cd or DVD in windows Media player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
  
  Method 3:
  
  Try to reduce the hardware acceleration again and check if it makes a difference.
   
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click on advanced settings, troubleshoot tab and then click on change settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
  d. click OK and then click Restart now.

  For more information, see this link: thanks and regards:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Equium M40X: Issue information and system devices.

  I just bought an Equium M40X and did a complete new installation with Windows XP Pro... I saved the original software loaded drivers and all loaded with success apart from a PCI driver. I went to the information devices and Sys problem and that's what it came with... PCI\VEN_104C & DEV_8034 & SUBSYS_FF031179 & REV_00\4 & AD1 B67F & 0 & 24F0 Can someone enlighten me as to what this could be how it makes me nuts.

  Thank you very much

  Hi, http://www.pcidatabase.com/vendor_details.php?id=308 PCI Vendor 104 belongs to Texas Instruments. Although 8034 DEV is not listed, I'm sure this is the FireWire (Lynx - OHCI IEEE 1394 controller) because it is in the rage of 0x8000. With regard to the resolution of your problem, I do not know you can try to remove the PCI entry and let XP re - detect new hardware. If it works maybe perhaps a TI driver update?

  Richard S.

• When I click on the "buy now" button for gift of my friend and itunes, it says that I must contact the support of itunes store to complete the transaction, what should I do?

  When I click on the "buy now" button for gift of my friend and itunes, it says that I must contact the support of itunes store to complete the transaction, what should I do?

  Saiyan Minion wrote:

  He says I have to contact the itunes store support to complete the transaction, what should I do?

  He said the support to contact iTunes.

• Equium M40X: Cannot print - not done. Print Spooler service does not

  My notebook Equium M40X has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. "print spooler service does not. I get this message even when you try to install the original installed printer drivers.

  To resolve this problem, I went to the services.msc to attempt to start the print spooler, but the command is not here present and seems to be missing. I also tried to launch it by clicking Start and then run and typing "net start spooler", but even once, it does not. Can anyone help with this?

  My laptop is an Equium M40X and the operating system is Windows XP Service Pack 2.

  Hello

  This error occurs because the spooler service has not been started or has stopped working.
  It seems that this error is known to Microsoft and they decided to public an article in the knowledge base that could help solve this problem.

  http://support.Microsoft.com/kb/314876

  As you say that the spooler service must be restarted.
  To start the spooler service, follow these steps:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field

  If you will not be able to restart the spooler service, you can try to restore the Windows operating system to the point initially by using the Windows System Restore tool.

• Equium M40X-discharge the battery. Help, please!

  I recently bought an Equium M40X - 149, and I did not understand why when the power adapter is plugged into the battery discharges and the computer turns off! So I returned to the store and they said it's just the cycle of the battery and I would need to go into bios to change the settings.
  I went into the bios, but I couldn't find anything that I could change to stop it! Can someone point me in the right direction because this is inconvinient for me to keep taking the battery when I want to use the laptop!

  Thank you
  Gemma

  Hi Gemma,

  Switching between AC and battery power is normally controlled by the Toshiba Power utility. You can check the configuration and parameters to confirm that you are not defined to use the power of the battery.

  When the PC is turned off then a chip on the motherboard controls the battery when the power is connected. This prevents the overload (and damage resulting to) the battery.

  If the problem persists, I would re - install the utility of Toshiba power from your utility disk or from the Toshiba web site.

  HTH-)

• Two problems with my Equium M40X

  Hello

  Today, I've suffered two problems, earlier, that the computer refused to wake... I have posted before I have an Equium M40X and so I have no restart button. His arrival on a desk where the computer would not come out of sleep... so I had to pick it up, then remove the battery... While power is still.

  Then later the DVD/RAM started weird noises when I put a CD and she underwent a complete block place... same procedure applied. Only this time the battery does not recharge after such a unorthodox procedure... is this normal? I mean remove the battery in a way...

  Hi Jamie,

  The usual way of "forcing" a notebook of power off is to hold down the power button for 5 seconds. This causes the system to power down and then you can just turn it on normally.

  Kind regards

• Equium M40X: How to increase the memory?

  A message appeared saying that the memory was low. How can I increase it?

  I

  Hello

  What memory do you mean? You want to upgrade main memory?
  I think that the Equium M40X came with 512 MB. Am I wrong?
  This value should be enough to run all applications.
  In addition, you have the ability to increase memory up to 2048 MB (2x1024Mo)

  The memory location is placed at the bottom of the unit and there, you can place the memory modules.

  But if you want to increase the virtual memory so please do:
  The button parameters of Performance - advanced virtual memory system properties Advanced tab change button.

  You can find the settings and there you can change.

• Cannot access the Zune Marketplace and iTunes store.

  Since yesterday, I am unable to access the Zune marketplace or the iTunes store. I have access to the internet. They both tell me that I don't have an internet connection. I have an internet connection through Comcast.

  Do you have a suggestion?

  Hi Mariposabarb,

  A. What is the exact error message?

  B. recent changes made on your computer?

  C. you are able to connect to Zune and iTunes using other internet browsers?

  Check that your Date, time, and time zone are correct.

  1. click on start

  2. click on Control Panel

  3. click on "Date and time".

  4. click on the button to change Date and time

  1. If the Date and time are incorrect.

  5. click on the Change time zone button

  1. If the time zone is incorrect

  After making the changes - restart the computer, and then run the Zune software and see if it fixed the problem - assuming that the Date, time and timezone were incorrect.

  Check links for iTunes below.

  ITunes for Windows can not access the Internet if the proxy settings are incorrect
  http://support.Apple.com/kb/TS1490

  If nothing works, you can try toreset the internet settings explore default. Open the link below and click it on theFIXIT button.

  http://support.Microsoft.com/kb/923737

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  How to troubleshoot wireless connection problems and updates to Zune Marketplace issues that occur when you use your Zune device
  http://support.Microsoft.com/kb/956611

  Error message when you try to connect to the Zune Marketplace: "unable to connect to Zune, please try again later".
  http://support.Microsoft.com/kb/928104

  I hope this helps.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Bookmark button has disappeared and I can't find where he was going.

  I recently had to reset Firefox because of some malware and when I started it back up my bookmarks toolbar button is missing and I don't know where he was going. I'll upload a screenshot showing what I mean. On the left is what it looks like now and on the right is what it looks like.

  http://i.imgur.com/AvicYTK.PNG

  You use the default theme?

  • Firefox/tools > Modules > appearance

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Open the Customize and set the toolbar to display items.

  • Firefox '3-bar' menu button > customize
  • If the missing elements are in the palette to customize then drag them back into the window to customize the toolbar
  • If you don't see an article on a toolbar and in the palette to customize, then click on the "Restore default settings" button to restore the default toolbar configuration

  See also:

  • https://support.Mozilla.org/KB/customize-Firefox-controls-buttons-and-toolbars

• I deleted my pictures and videos to free up space on my iPhone 6, but the settings and iTunes still say that I've not left storage. Help, please.

  Hello

  I have an iPhone 6 and uses iOS 9.3.2,and I recently deleted all my pictures and videos to free up space, "Manage the storage" in still however said circles I 23.4 GB of photos/videos like iTunes when I connect my iPhone to my Mac. I deleted my recently deleted folder and follow the instructions of a guy showing a year, which suggests to set my phone date about two years back and deleting the photos recently deleted the file and both of these solutions do not work. I have reset my phone (home and power button operation / stop) and also, it does not work. I don't want to wipe my phone and restore it if possible, but it's the only option I can think of next.

  Are there other solutions before I try this?

  Thanks in advnace

  Ben

  Hey Ben,

  Thanks for stopping by the communities Support from Apple! Looks like you are trying to free up space on your iPhone by deleting all the photos and videos, and you still see 23.4 GB absorbed by these files. You have already made sure to empty your recently deleted album, fix the date of return on your phone and performed a hard reset on your device. You did an excellent job so far, and I'll be happy to give you some ideas to move forward from here.

  Before diving into other troubleshooting procedures, it would be useful to ensure that you have a recent backup of your iPhone is available. This will help us ensure that all your important data is stored safely for you. Here is an article with information on how to backup your device:

  The backup of your iPhone, iPad and iPod touch

  Once it is in place, I recommend you to reset the settings on your phone. This is not the impact of your personal data, but you will have to perhaps adjust the user specific settings, but also re - enter passwords and Wi - Fi networks. To complete this step, go to settings > general > reset > reset all settings. When you restart your phone, check if the local storage on your phone has updated to reflect the changes you did related to your photos and videos.

  Beyond that, you want to look at your phone erase and reset to the factory settings. It is possible that some kind of software corruption causes the divergence of storage that you are experiencing. Set up your phone as a new device via iTunes install a new copy of iOS and also to exclude the corrupted files, etc. in your user data. This is a resource for this process:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  For later use, it may be useful to use iCloud photo library to transfer and store your photos. There is a feature that allows you to optimize the storage on your iPhone so that your photos and your videos do not have as much local storage space. Check out this resource to learn more about iCloud photo library:

  iCloud Photo library FAQ

  Have a fantastic weekend!

• Cannot update or install iMovie and iTunes u after reset my iPhone 6 s

  Cannot update or install iMovie and iTunes u after reset my iPhone 6 s

  Do you receive an error message?

  Are signed with the same Apple that was used to get these apps at the start ID?

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

• 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

  1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

  I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

  I guess you have not fed and attempted to restart.

  In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

  Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

• I lost all sound on my Equium M40X

  Seems to have lost all sound on my laptop Equium M40X.
  I tried everything obvious like ensuring that nothing is disabled, etc., have used the restore to an earlier date facility. I downloaded a new driver sound - but still no sound! Can anyone help please?

  Thanks, Bobby

  A strange case which s?  :|
  If I was you I would first check the Device Manager.
  There may be some conflicts with your sound card
  Remove the sound from the Device Manager and restart the machine.
  Then reinstall the audio driver again.

  Did you also check if you can hear something using the headset?
  You should do this!

  Also check if the sound is not muted. You can disable and enable using the FN + ESC.

• Equium M40X: Can I play the games?

  I have a new laptop Equium M40X. Am new to laptops. I can play games such as the prince of Persia warrior on this laptop, quietly and will seriously strain its resources.

  Hi Kamal,

  Welcome to the forum. Your new laptop computer has sufficient resources for almost all of the games currently available, so you risk nothing to the test by playing.

  The only problem you're likely to face with some of the most high resources games is the graphics card, because it generally uses drivers designed for your laptop and these are not necessarily compatible with the requirements of the games. I have not yet found an easy way to predict what games will be or will not work properly.

  So far, I only got a game that wouldn't work properly on my laptop due to incompatible graphics drivers (I have an ATI RADEON 9100). It is a somewhat obscure title (Knights of the Temple - crusade).

  Good luck with your new Toshiba,

  Kind regards