Visio 2002 running on vista and windows 7

Similar Questions

• Is ms flight sim 2002 compatible with Vista and if is not a patch? __

  Is ms flight sim 2002 compatible with Vista and if is not a patch?

  Hi zots,

  That you get error messages when you try to install or to play Microsoft Flight Simulator?

  You can run the game in Windows XP SP2 compatibility mode. For more details follow this link: http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-of-Windows

  Additional information you can visit this link Microsoft Games Forums: http://www.microsoft.com/games/en-US/Community/Pages/forums.aspx

  Kind regards

  Bharath

  Microsoft technical support

• Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

  There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers:

  DeskJet 710

  DeskJet 712

  DeskJet 720

  DeskJet 722

  DeskJet 810

  DeskJet 812

  Deskjet 820

  DeskJet 822

  DeskJet 1000

  The attachment contains a fix for this problem for Vista and Windows 7.

  [The patch does not work for Windows 8, 8.1, or 10 x 64 systems.  There are efforts to this address, if a solution is developed it will be shown here.  [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}]

  First of all make sure that the driver for the installed printer.  If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.)

  Apply the patch as follows: log in to the computer with an administrator account.  Download the patch by clicking on this link or on the trombone at the end of this post.  Save the hotfix on your computer, then unzip it.  Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3

  Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows.  You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place.

  This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste.  Depending on your UAC settings, you may need to provide confirmation.  Also allow existing files to be replaced if you are prompted.

  This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7.

  Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch.

  Update - here is that of the more detailed installation instructions:

  Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer.  Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command:

  MD c:\temp

  CD \temp

  Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination).

  [Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.]  If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.]

  Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...)

  *. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others).

  Net stop spooler (ensures that the files are not in use.)

  Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)

  Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)

  Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy)

  NET Start Spooler

  Output

  [Edit - note that these DLL files will already be in the directory.  You will get a warning asking if it's OK to replace the files, say "Yes".]

  At this point, the patch is installed and ready to print.

  Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel].   If you use a make you converter USB / parallel it is supported in your operating system.  The following messages are reported by cables USB-parallel that are supposed to work in Windows 7.   A driver is required for the converter USB / parallel besides the driver of the printer.  For converters supported, it is usually provided automatically in Windows 7.  Note: the appropriate to select for USB-parallel converter port is often USB001:.  I've heard of cases where the port was USB002: or LPT3: as well.  If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab.

  Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4

  If you use Windows 7 do the following: log in as a user with the administrater properties.  [The following assumes that you are using IE as your browser] Click on the here link and select "Save".   Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all.   If extract all is not an option, then click on "Open with" and select Windows Explorer.

  

  Leave the default directory and check the box "Show extracted files when you are finished", excerpt.   Click Start, computer, and type % windir%\system32\spool\drivers\x64\3.  Arrange the windows so that you can access the two parts of the window.  Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll.  Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box.

  Note: %windir%\System32 is a system variable that points to the Windows directory.  For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer.  If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory.

• Sharing data between Windows Vista and Windows 7

  As Windows Vista cannot join the homegroup, which is a feature of Windows 7, how the files, folders or drives are shared between Windows Vista and Windows 7?

  Hello

  Set you up a network between Vista and Windows 7:

  "Networking of computers running different versions of Windows.

  http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-7

  "Learn how share files and printers on a network with computers running.
  Windows XP, Windows Vista and Windows 7. ... This article also covers the
  necessary parameters to set up file and printer sharing on your network. »

  See you soon.

• Connection to the network with Vista and Windows 7 computers

  A similar question was answered before, but it's XP computers I use Vista and Windows 7.

  I have a Windows 7 computer that is part of a home network and who also has a connected printer. I want to access the printer from a Vista computer that is also on the network. When I try to connect to the Windows 7 computer, I get the error "logon failure: the user has not granted the type of logon required on this computer."

  I've seen solutions have been when the system tries to access the printer was an XP system. Can someone help me with this problem?

  Thank you

  Jim

  Hi Jim,.

  ·         Is file sharing enabled?

  ·         You have disabled password protection?

  Try to check the Advanced sharing settings in the network and sharing Center. To do this, follow these steps.

  a. click Start, Control Panel and then click network and sharing Center.

  b. now, click change advanced settings for sharing.

  c. now make sure that file and printer sharing is activated on and protected by password sharing is turned off.

  You can also see the article for more information:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Let us know the results.

• To come back and between Windows Vista and Windows XP

  My computer is running W-Vista and would like to know if I change the hard drive Windows XP, I have to return to my hard drive with Windows Vista to causing problems. I need to do for compatibility reasons.

  Concerning

  John

  JohnD

  Go to the Dell support web site: http://support.dell.com/support/downloads/index.aspx?c=us&cs=19&l=en&s=dhs& ~ ck = GuidedPathHomePage

  Enter the service number for two computers, check if the driver files are the same for both computers. If they are then you shouldn't have a problem.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• The update wants to do a net framework 1.1 SP1 on Windows XP, Vista and windows server 2008 x 86. KB2656353 but can not. Why not?

  The update wants to do a net framework 1.1 sp1 on Windows xp, vista and windows swrver 2008 x 86 (KB2656353), but can not.  Why not?  He simply has it again and again without updating.

  I finally got by a 'person' and he took over the computer.  It took almost 2 hours, but he finally managed to fix the problem and get the update installed.  Hooray!

• Microsoft Outlook is compatible with Windows Vista and Windows 7?

  Is there a way by which Outlook can be installed on a computer, Windows Vista and Windows 7.

  We have replacements for Outlook. If so, how to get one?

  Farhad

  «Farhad...» "wrote in message News: 05c1a45d-b7ab-4b99-8a06-b131bb67989b...

  I wanted to know about Outlook Express. I heard that its not available with newer versions of Windows. Is Windows Live Mail used, what is the replacement for Outlook express in Windows Vista and Windows 7. Farhad

  Outlook Express has been replaced by Windows Mail in Vista - and completely removed in Windows 7.
  Windows Live Mail is now supported by MS free mail client and can import messages and contacts in the OE stores.
   
  Note that the upgrade to Windows 7, XP requires a format of the HD - back up your data in the first place, if do a upgrade.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Help me to solve the problem with modem hspa usb on Windows Vista and Windows 7

  Hi, I have a problem with my USB HSPA modem when I tried to install in my Windows Vista 64 - bit PC. Sometimes it's OK, but sometimes it has encountered an error trying to install it. After the installation of the almost complete progress, reports of windows as "Unknown material" or "driver is not found. Maybe after a few tries, I was able to install the modem. But later, its happened again. I take the modem at the other PC with XP, it is still OK, but it happened again with Windows 7 Ultimate 32-bit home version. so could you help me to fix it? is it a bug of Windows Vista and windows 7? Thank you very much

  Hello

  go to the website of modem manufacturers and look for the last vista and/or firmware for windows 7

• I installed Windows Live Mail and now am trying to migrate mail from my laptop which has been using Vista and Windows Mail.

  I just bought a new desktop computer using Windows 7.  I installed Windows Live Mail and now am trying to migrate mail from my laptop which has been using Vista and Windows Mail.  I need help please.

  The Vista system export your contacts and send to CSV files, then import them into Windows Live Mail.

  Good luck.

• NB100 and graphics issues in Vista and Windows 7

  Hi all.

  I have two NB100s and I wanted to upgrade to Windows 7. Everything went well until what the graphics driver has been loaded. Responses of the screen were as refresh once per second 5, then also the system froze for a few seconds - impossible to work on it. The case even on the two NB100s and even with the new drivers from Windows update. I'm curious to know what is the problem, because a lot of guys have written that they are running windows 7 and everyting is ok right after installation. I tried Windows Vista and the same situation has occurred. The only way I can use it with Windows 7 is to use the XP drivers. But then the aero glass does not. I just got idea if there is no problem with the new bios 1.6. It seems that other older guys NB100 and use Windows 7. Could someone help me? Has anyone tried Windows 7 with bios 1.6? THX.

  Hello!

  I think the problem is that you are using a beta version of the operating system and not a final version and these errors are normal because nobody can say that Windows 7 beta runs perfectly and without problems on all laptops or computers.

  However, see the Intel Web site for the latest drivers. Perhaps there is a newer version than on the Windows Update Web site.

  Good bye

• Quality of its poor window media player with vista and windows 7

  Since I bought my first Vista PC three years ago I never liked playing my music with Windows media player. This is because the sound quality is irritating. For some reason, the volume of any song keeps rising and falling when he plays with the media player but the same player sound perfectly with any other player. Note, in this case with windows Vista and when I upgraded to Windows 7 I have always noticed the same problem. Many of my friends who use Windows vista or windows 7 also complained about this problem.
  Does anyone have a solution to this? Because I can't play my songs with windows media player on my pc windows 7 and I had to keep my old windows xp just to play my songs.

  Hello

  It could be mainly mediocre speakers. Check you drivers.

  Control Panel - device - SOUNDS Manager - look for HD Audio Mine said RealTek High Definition Audio

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  1. go to the system manufacturer's website and search for the driver the newest download - SAVE - will click with the button straight on and RUN AS ADMIN
  (This is your rescue.) REBOOT after each installation of driver.

  NOTE: Driver Sound often rollback so check the version after installation and reboot to see if the version you
  installed is there, if not repeat - restart until it is. It may take several tries depending on the recommitments how he
  the fact.

  Then do the same for the site of the manufacturer of the device.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Many players have some equalizers and there are 3 rd party addins as FXsounds - DFX.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Internet Explorer 9 problems with Vista and Windows 7, are there known issues that are causing to freeze or crash completely computers?

  I was warned of updates via Windows Update Internet Explorer is available (important update) for my desktop running on Windows Vista and my laptop running on Windows 7.

  I had to go back to Internet Explorer 8 on Vista because it keeps freezing. Is that what someone else has experienced this problem because I'm not going back on until I know it is safe to do so. Can someone advise me on this please?

  Window 7 is on my computer, but my laptop but since Internet Expplorer 9 installing my computer has an accident and I received a message saying that windows had closed my computer to save my files etc. also since the installation, I get a black screen, does not last a long time but its worrying because that's what happened before the crash. Can someone advise me on this please?

  I am a real novice, not to speak of mind at all and I was wondering also if someone else knows the problems that I am and if you is microsoft aware of these problems and try to solve a problem for them. I think they have out there soon.

  Are you worried? Yes. any aid granted by a person would be much apreciated. Thank you

  I was warned of updates via Windows Update Internet Explorer is available (important update) for my desktop running on Windows Vista and my laptop running on Windows 7.

  I had to go back to Internet Explorer 8 on Vista because it keeps freezing. Is that what someone else has experienced this problem because I'm not going back on until I know it is safe to do so. Can someone advise me on this please?

  Window 7 is on my computer, but my laptop but since Internet Expplorer 9 installing my computer has an accident and I received a message saying that windows had closed my computer to save my files etc. also since the installation, I get a black screen, does not last a long time but its worrying because that's what happened before the crash. Can someone advise me on this please?

  I am a real novice, not to speak of mind at all and I was wondering also if someone else knows the problems that I am and if you is microsoft aware of these problems and try to solve a problem for them. I think they have out there soon.

  Are you worried? Yes. any aid granted by a person would be much apreciated. Thank you

  I am I have the same situation, because I installed Internet explorer 9. The only thing that differs with us is that I kept IE9, and I'm dealing with it full of hope that MS will return with a patch soon!

• I need help setting up a network between Windows Vista and Windows 7.

  original title: HELP me to SET UP a NETWORK FOR WINDOWS VISTA AND PORTABLE WINDOWS 7 DESKTOP AND a DLINK WIRELESS ROUTER

  HELP ME TO SET UP A NETWORK OF WINDOWS VISTA DESKTOP AND LAPTOP WINDOWS 7 AND A DLINK WIRELESS ROUTER

  Hello

  You can follow the procedure from the following link: networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows7/Networking-home-computers-running-different-versions-of-Windows

• set up a home network with the PC using xp vista and windows 7

  I need to know how confugure my desktop vista and xp desktop and cell phone with my computer laptop windows 7.  detailed with inustrictions or links please.

  Hello

  You plug the computer via the network to a router or a switch card, and configuring their file sharing.

  ---------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET