Vision

Similar Questions

• a vision tek hd 5450 graphics card work in my PC p6213w?

  I wonder if the vision tek hd 5450 graphics card work in my Pavilion p6213w. I wonder if I should find a different graphics card instead. I know I have to buy another power supply, I just want Advisor be cause I play several

  Online games and doing the research for the documents from the school.  I also use my PC to watch movies and television series like weather reports edge chipset does not allow some of the games and videos to be played correctly anylonger as they changed their policy.

  any suggestions for this help is taken into concideration. Thank you very much

  Hi Noel,

  Vision Tek HD 5450 video card will not work in your desktop PC without an upgrade of the power supply.

  Your PC came with a 250 Watt POWER supply and which does not respect the minimum of 350 watts required for the video card Vision Tek HD 5450. Here is a link to the plug of your PC. If you upgrade the PSU, the card will work in your PC.

  I recommend that you buy a PSU that has at least the ATX12V v2.2 / EPS12V v2 specification. Here is a link to a document on the Newegg.com web that shows some power supplies that work. Stick with major brand names such as OCZ, Corsair. The second level and no name power supply could disappoint you even if they are less expensive (which assimilates sometimes so lower quality).

  Best regards

  ERICO

• Qosmio F750 does support NVIDEA 3D Vision with glasses?

  Hallo!

  the portable actiually supports 3D without glasses. But I have another question:
  the F750 does support 3D * with * glasses? I want to wear glasses from NVIDEA 3D Vision. According to NVIDIA, specification for the glasses the F750 must be supported. But I can't put the 3D mode. I installed the new dreiver and BIOS 2.0. In framework of NVIDEA is now 3D appeared. To achieve a 3D mode it is necessary to adjust the 120 Hz display, but I can choose 60 Hz only.

  Can you help me please!

  Kind regards
  Doxtor

  > To achieve a 3D mode it is necessary to adjust the 120 Hz display, but I can choose 60 Hz only.

  So this is not supported would need an external monitor that supports the 120 Hz

• Qosmio X 770 - 3D Vision does not a vision

  I have a new laptop that I just started working.
  I did everything to put in place including 3D vision read the instructions on the site FAQ, introduction of lenses, download the Nvidia 3D player and allowing the stereotopic thing.

  But 2D is for me so far.
  I'm watching the compressed AVI, but I think I have all the latest codecs K-Lite.

  The movies play fine as 2D films of colour TVs - seemingly all 3D movies when they are not viewed with 3D enhancements.

  Thoughts, what could go wrong?

  Thanks for the input.

  What Media Player do you use?

  You must use a compatible 3D player, then try the Toshiba Media Player which was preinstalled, or the nVidia 3D video player.

• Satellite A660-158 - vision 3D support?

  Is supported in Toshiba Satellite A660-158 nvidia 3d vision?
  CPU - Intel Core i3 2130 Arrandale (330M)
  RAM - 3072? B DDR3
  -nVidia GeForce GT 330 M graphics card

  Help, please!

  Hello

  3D is supported, but only on an external monitor that supports 3D, but not on the internal display.

  More information on Satellite A660 you can find on the product page:
  http://EU.computers.Toshiba-Europe.com

• HP Pavilion Notebook15 L5Z89EA: 3D Vision

  Hello

  I would like to know if my phone is active 3d and or if I could use Nvidia 3D Vision glass kit with this laptop.

  Hello

  It's your games/movies. If a game or movie is in 3D, you can use 3D glass to watch. You may need a few tablets of aspirin at the beginning (except if you already get used to). The following link shows its specifications:

  http://support.HP.com/au-en/document/c04593952

  Kind regards.

• Qosmio X 770 - no support of 3D vision with nVidia driver

  Hello

  I just bought a Qosmio x 770-107 with nVidia 3D Vision package. All right, I could enable stereoscopic 3D with the pre-installed drivers.

  Then tried to access some 3D content (in the browser) and after a trial ([http://www.3dvisionlive.com/3dv-html5-detection]), I discovered that I have an out of date version driver for my GTX560M card and need to update before.

  First step is to download the right driver from nVidia (280.26-notebook-win7-winvista-64bit-international-whql). Then I saw that failed the system compatibility test saying that I don't have the appropriate hardware for it, which is false, double checked what I downloaded and covered material including GTX560M.

  So, this is the first problem.

  Then also studying, I managed to modify the INFs to accept and install the driver.
  It worked, I got the latest driver from nVidia (using a clean installation, remove all first).
  Then I discovered a new (frustrating) problem, when you try to reactivate the stereoscopic 3D, saying that I do not have a stereo monitor and disable this feature in the menu.

  How can we get appropriate and entirely achievable latest drivers for our GPU with support for 3D Vision?

  Kind regards
  Razvan

  Hey Buddy,

  That s illustrated why Toshiba recommends installing only their own drivers and not 3 third-party drivers from nVidia.

  The reason is that no one has tested these drivers on your laptop so probably a few features such as 3D vision don t work. In addition, your laptop could overheat due to different thermal management.

  I recommend you to install the latest display driver Toshiba you can find on the page of Toshiba. These drivers are tested and work properly with your laptop.

• Crop Factor, the size of the sensor, field of vision

  I find all of it. a but confusing when many call of cameras themselves as full frame, but when you put the same lens on different cameras, the frame is different.. crop factor. field of vision... different .but
  So what crop factor... is the f55 sony please? I've seen a number of different things on various forums not suggesting no harvest to 1.3 but you see the Abel cine graphic field and the f55 is cropped than a c300, which is 1.6. .some how I thought that we were heading toward a world where 50mm meant 50 mm...

  This becomes particularly relevant by using the lens wide angle. When you use the tokina 11-16 (I think only accepted the wider for those who have no characteristic budget) on one of these cameras, the crop or field of view factor restricted means that you have nowhere near frame... a 1.6 crop what goal can give you the grand scale?

  So what is the truth about the f55... Please thank you...

  So, from what I can tell with the F55...

  Sensor is 24 x 12.7 mm with a diagonal of 27.1 mm

  By comparison, when you work with a negative S35 (1.85, 2.40, 1.78) will all use the same horizontal dimensions for the extraction of the negative. What is happening at 24mm (through the book of ARRI frosted glass dimensions). So what this tells us, it's that your lenses will have the same field of view HORIZONTAL on the F55 as they would a film camera. So a 50mm should have the same field of view HORIZONTAL as a film S35mm camera.

  Even a 3perf S35 cameras extraction rates from the exposed negative will be 23,11 mm, slightly more small, but with regard to the horizontal field of vision, people aren't saying that their 50 isn't a 50 because we turn 3perf vs 4perf.

  Now, using the diagonal, show us the lens cover. Yes, the sensor has the same height as a negative film, so if a lens covers the sensor or will not play with the diagonal. And to also know the lens image circle. I can't find what the image circle is for this device, kind of coverage I can't tell you.

  What I see, is that it was designed for the size of APS - C sensor cameras that, on average, would be a 25.1 x 16.7 mm (all manufactured products have different dimensions some small some bigger ones, that it is supposed to use on average). So a device to sensor APS - C on AVERAGE, a bit of a wider horizontal field of view you. The diagonal of 30.1 mm makes me believe that you should have a cover and that he should not thumbnail, although the difference in horizontal makes me think that it might be a very slight decline offshore on the corners.

  Something to remember... well that this objective was intended for 35mm film, in the world of images is fixed. S35mm film in the film world is different. So when a film camera say it's Full Frame, it is in relation to a negative S35, not a camera negative. So with a film lens, a 50mm would mean a 50mm, but when you start to move the lenses of disciplines, that's when things start to become difficult.

  And please keep in mind, that's how I know. I'm not saying this is 100% the perfect answer, it's just what I saw, what I heard and what tells me the calculation.

• Audio but not vision

  I'm trying to airtime of various Apple devices to my AppleTV. When you try to do, I'm getting audio but not vision. When return to Apple devices, everything works normally again. I guess there is a problem with my AppleTV. It doesn't seem to matter where the stream is coming from who. It will usually be YouTube or BBC iPlayer. That said, it seems to happen when I try to content of airtime which is stored on the device from Apple too. I use the latest AppleTV unit and the software is up-to-date.

  Everything worked OK until recently.

  Not all applications are enabled for AirPlay, it is up to the developer to do. However, if she does it for all the content you can try a reboot for ATV, IOS device and router. If during testing of wifi Ethernet

• Qosmio X 870 - 3D Vision does not

  I just bought a Toshiba Qosmio X 870 and its fantastic, but I can't seem to activate the nVidia 3D Vision.

  I open the stereoscopic 3D and go in the Setup Wizard, I wireless 3d glasses (fully charged), go to the next screen and the next button is disabled.

  I have glasses on the score on the screen - what am I am I doing wrong? (Nvidia drivers installed, 296.31)

  Hello

  Have you installed or uninstalled everything related to graphics and 3D?

  Make sure you have the pre-installed nVidia driver that is provided out of the box.

  If you have installed the factory driver, try a system restore or run recovery.

• Blue screen on HP on HP all-in - One PC Vision

  Hello. For the last week or so my PC all-in-One was bat with a blue screen every time that comes out of hibernation. It seems not serious if it went into hibernate on its own, or through start-> sleep action. The blue screen usually indicates a page KERNEL_DATA_INPAGE_ERROR error.

  I restored my system to attempt to repair. He did, for a while, but today it started again.

  A few web searches made me suspect that it is a manifestation of problems with the fix for Microsoft KB2670838. Other users have reported blue screens after installing (usually as a sine qua non for IE 10), although I have not seem to reports of what happens after a sleep, as it is for me.

  Others hit this kind of problem? Suggestions on solving?

  I intend to uninstall this hotfix, see if it helps. I'll report.

  The number of my all-in-one PC product is

  HP Vision 120-1026

  (Sorry, I wanted to include it).

  I ran the diagnostics twice, but no problems were found with the S.M.A.R.T. tests or anything else; all the past. In addition, the hard drive is not that big by today's standards, just 685GB (not 1 TB or more as suggested the fix).

  I have some good news, however. During the uninstall of the KB2670838 bug fix only made no apparent difference, I managed to solve the problem by using the system restore to restore my system to the first point of restoration, this day here. Thus, it seems that it is triggered by a Microsoft Update, but not pain causes one on other systems.

  I configured my system for manual updates now and will see if I can identify the culprit was updated.

• BT Vision (UK IPTV / Internet)-+ Multicast Unicast on same port wired?

  Hello

  I recently bought a Nighthawk R8000 to replace my BT Home Hub 4. Everything goes fine until I checked the BT Vision service I have. This box uses the internet standard and multicast for television services.

  The problem I have is that I can only have one or the other work at any time. So if I set up IPTV to cable port 4 bridge mode I get TV multicast channels but lose the standard Internet features.

  If I then disable bridge IPTV mode I get internet services normal but lose the multicast channels.

  Is there a mode / setting etc. that supports two IPTV multicast and unicast traffic to the same cable port?

  It feels like this should be possible, I'm not sure what method to achieve this.

  See you soon,.

  Wayne.

  Hi all

  This is a firmware of the trial that you can try to make it work.

• Satellite A660-10W 3D Vision Support?

  Here are the specs:
  http://Gulf.computers.Toshiba-Europe.com/innovation/en/product/satellite-A660-10W/1086987/toshibaShop/false/

  I can see in the specification, there is word about it so I think that this laptop supports 3D Vision.

  As far as I know the first model for the EMEA region will be Satellite A665.
  Google around and you'll find many articles on this subject.

• y580 3D vision driver

  How to install 3d vision in y580 GTX660m, I put latset verstion shape the nvidia site and still it used to solv the problem. Please help me to install the 3d vision drivers.

  Hi yoan 1,.

  After consultation with the members of our team, he recommends that you go through this thread. Please see the link below.

  https://forums.GeForce.com/default/topic/524711/3D-vision/Lenovo-y580-and-3DTV-play/

  hope this helps to clarify the issue.

  Concerning

• ACCESSIBILITY of the VISION can be improved by the Finder, etc.

  http://www.Macworld.com/article/2026699/stop-squinting-make-text-bigger-in-OS-x. HTML

  I can't find answers, but someone else gave this link to an article that I think when followed to the letter will give a lot

  users better visual clarity that they would without these customizations.  On Finder > view > Display Options, changing

  the font size, on which it turns NOT ONLY IN FINDER BUT in EMAIL AS WELL (for those who have complained about Visual clarity

  This app.)  On each stop in the Finder, there is plenty of choice using 'Display the Options' and at the bottom of each of them is the choice

  to choose the default selections, indicating that the article is important.  Try it, the article is clear and simple and a

  good source.  "May you be comfortable."

  Another remedy that helps me with this problem is to get an optometrist to prescribe glasses to use on the computer, for me, it is glasses that allow for better vision 20 ' away and are not bifocals glasses which make me look up of uncomfortable way in order to see.  AO said that now they have some computer glasses which are also the bifocals (let see you near and far together in a pair).

• Control of a system of engine not to not 2 - axes of Vision Builder

  Hello

  is there a way to control 2 Motors step by step via Vision Builder?

  What are the components do I need?

  BR,

  Klaus

  Hello knuemm,

  There is no action, which allows to directly control the player. It depends on your hardware configuration, some engines step by step has a serial interface and also the device the vbai is running on other devices of movement has a digital input and some vbai devices have outputs digital that may be used for this.

  Fleeing a LabVIEW VBAI Inspection

  I followed the smartcam NOR control pilot Motion

  You can also create steps for the VBAI to run LabVIEW code

  NEITHER Vision Builder HAVE Development Toolkit