Vista 64 return failure - now will not start

Similar Questions

• Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

  Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

  Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.

• Tecra A9 - formatted and now will not start

  I recently formatted my Tecra A9.
  Trying to remember exactly what I did.

  I used the system recovery disk, went to the Recovery Wizard. Then I had a few options, and I took the low that was to erase all data from the hard drive. It took about 12 hours.

  Now, my laptop does not recognize the system, my Vista Ultimate o/s disk recovery disk or my drive of Windows XP o/s. I also can't get into the BIOS.

  When I turn on the laptop I get the Toshiba screen, where, at the bottom, I see the following icons: disc, usb, CD, floppy, network. Boot order, I guess. When this screen disappears, I get a black screen saying: "insert the disk in the drive system. Press any key when ready... »

  I hope somenoe could get an idea of what I can do.

  Thank you
  Kurt

  Hi all. I had a very difficult time to find out who the current key was to get to the BIOS. I thought it was DEL or F5 or F8, (based on the messages that I had found in various forums, I could find nothing in the actual documentation of Toshiba). It turns out that the access key is ESC. I went, changed the boot order and am trying to install Windows 7.

• Acer aspire 3820-7250 will no longer start. has frozen at startup, power off and now will not start.

  Windows 7 operating system.  tried system restore (all the recovery tools fail), tried the battery leaving aside all night, says now "no HDD found".  What should I do? What is wrong with him?  Should I try to boot from a USB key containing a boot file?  The big question is how can I recover my important files?

  Ok. Finally saved Rufus on desk, placed the iso HirensBootCD file on the desktop, used to burn it to a blank USB Rufus (by selecting the thumbdrive you want to use under "device", select "Partition for BIOS MBR scheme" for the partition scheme, select "FAT32" to the file, 64 k for "cluster size" system, then down 3 boxes must be checked.)  Make sure that you select "ISO Image" and click on the small icon next to make it burn your HirensBootCD.iso file, click Start, burn it, because of CD/HDD) then plugged the laptop thumbdrive is crushed, ensured he was set to boot from USB and good to go.  MiniXP selected and I'm now recover all my files from the HARD drive.   SO, this is the procedure to recover my data, thank God, but what is the solution permanently to repair the laptop?  He needs to have a new operating system installed?

• When you download the creative combination 6 applications it forces and now will not start download again because of an error

  I was download of creative applications 6 suit and he asked me to force quit other applications so I did and with them it forces to leave the Setup program and now when I try to download an error screen appears

  UINSTALL anything cs6 which can be installed.

  Run the vacuum cleaner by the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer and try again to install cs6.

• Updated FF, stuck computer had to turn off the computer and now will not start.

  Toshiba Satellite PC running Windows 7.

  Received message there was an update for Firefox. Manually, clicked on it. After restarting the computer (as shown), I clicked on the Firefox shortcut icon and the Office froze. CTRL/Alt/Delete didn't work - nothing worked so forced the laptop turns off, press and hold the power button until it did.
  WAITED a few minutes and then turned the monitor never came to top - just stayed black. After a second attempt, that the computer turns on, the keyboard lights up but screen stays black. NO.
  problems before trying to update to Firefox.

  I write this on my Mac, as there's no way to use the PC with a black screen.

  Have you checked that the monitor is connected correctly and that all cables are connected entirely?

• Windows Mail in the course of execution when power failure (vista) and now will not boot

  When the power was restored, the microsoft mail will not start. He thinks, there is a version that is still running and will not start another. Master is not running any program. Banners suggest log off, and then try again. If the problem persists, start/stop. Basic work have tried several times. Computer can access the internet by using IE everything seems fine. The registry did get watered?

  I think to clean the installation could be the fastest solution.

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

  What is "safe w/data comm Mode"? I might need a translation for this.  If Windows Mail works in "Safe Mode with networking" and not in Normal Mode, then something else is responsible for booting in Normal Mode is the cause.

  Maybe your power outage also gives you a bucket of malware load?  They say things happen in threes, maybe that your machine is about to die.

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

  They install and run in safe mode.

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• I followed instructions tp uninstall IE 10 and internet now will not work. How to return to IE 9?

  I followed instructions tp uninstall IE 10 and internet now will not work.  How to return to IE 9?

  I followed instructions tp uninstall IE 10 and internet now will not work.  How to return to IE 9?

  Hello
  What I summarize your question is: you have installed IE 10 and you want to restore to IE 9.
  Since you are using IE 9 and 10 of IE, I can assume that you use Windows Vista or Windows 7.
  To restore IE 9 return, you must follow these steps:
  1 - click Start  
  2 - Goto Control Panel
  3 - find Windows Update, click
  4 in the lower left corner you can see the updates installed, click
  5 - search for Windows Internet Explorer 10
  6. right-click on it and select Uninstall
  7. you're done here,  a system reboot may be necessary.
  Hope this helps, let me know if the problem persists.

• Satellite A300 Vista - will not start cd/DVD with backup

  Hello world

  I have a big problem with Toshiba a300. Windows Vista is not starts.

  Watch only the menu with 2 options: first "fix the system" - when I choose this option 10 seconds later I see messeage: click OK to turn off the computer.
  When I choose the second option in my laptop restart every time.

  I tried after turning on the computer, press F8, but all the option in this menu do NOT fix the problem.
  I have no CV/DVD to my computer.
  After the first time I don't burn DVD with backup.

  I have really now how can I install system with recovery patriction. What softwere I need and how do I do it?

  Thanks for help

  Hello

  Sat A300 and other new models of laptops are equipped with HARD drive recovery option. This HARD drive recovery should allow you to recover the laptop without the use of all disks.
  In order to start the procedure for HARD drive recovery, you need to press F8. Then choose the first option called fix my computer. Then new window pops up and there you have to choose Toshiba HDD recovery. All that s.

  But if this procedure don't work (no matter why) then you will need to use the Toshiba recovery disc. If you n t create a floppy disk for recovery of a hand and the laptop will not start, then you will have to buy a drive for recovery of this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• The latest XP update has been installed. Machine will not start now. How should I do?

  Original title: Windows XP update killed my PC
  April 13, 2011, the latest XP update has been installed.  Machine will not start now.  How should I do?

  Thank you

  Them

  From the F8 Advanced Boot Options menu, were you unable to choose:

  Disable the automatic restart in the event of system failure

  Your system sounds like it restarts to determine what he complains and then someone can help you to repair.

  This is why there is a disable automatic restart on system failure option...

  There is another option in the menu F8 Advance Startup Options:

  Last good Configuration known (your most recent settings that worked)

  I do not think that this will help you, but you can at least say you tried it if someone suggests.

  MS products generally work as expected, but may not perform as desired or expected.  You can push that dog and make good the bark.

• Vista will not start. Verifying the integrity of system files and repair has no ErrorCode = 0 x 2 HELP PLEASE!

  ASUS PC, Windows Vist Home premium, all updates.

  Out of the blue, it will not start.  Access the start scrolling (the one just before logon) screen and it just stops.

  Twice I ran Vista check utility.  The first time, I chose to do the system restore to previous state.  Restarted.  Always off.  The second time, it took much longer and from what I can see.  All TESTS PASS, except one:

  Repair action: repair and checking of the filesystem Integrety

  Result: failed. Error code = 0 x 2

  Time required: 6206818ms

  I get no blue screen, I can't even any screen!

  I'm triying to repar because I have several costly software titles that link the authorization key code to a key hardware and software installation.  I don't know that I could reinstall if I get a code (randomly?) different generated software.

  I don't know about i-tunes and other content downloaded my wife has such as MP3 files and audio books.

  Thanks for any help!

  The test fails (SFC) checks for corruption in the files on your system.  If she can't even complete, she suggests the Vista all system needs to be re-installed - but you have already done this and you still have the problem.

  In fact, look like a hardware problem.  Here are some troubleshooting guidelines hardware that can help (but probably not for this question as what you really need, it is a replacement for test):http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  Frankly, I think it's time to take the system to a repair facility of good reputation for the service computer (or to return to the manufacturer for repair - costs, schedule, guarantees and make a decision).  I don't know what hardware component.

  If you can, try to back up your data before you import it it because they will probably wipe the drive clean during the process. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (perhaps done on another computer).  This should give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, try slaving the drive to another system and access the data in this way.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista SVC PK2 after installation computer shut itself off the coast and will not start a error code: 0xc0190005

  After SVC PK 1 installation, windows vista everything was ok.
  After installation of SVC PK2, the computer said install, then stop and now does not start, either in safe mode, or the title of system repair.
  the computer is a laptop HP dv9543cl.
  I can't do anything to install, no period.
  the system crashed.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/computer-hangs-in-boot-after-installing-Service/c9b10050-e68e-45aa-99CA-0da3fc9851eb

  It will be useful.