Vista - are there problems with Windows Installer (KB893803)?

Similar Questions

• Are there problems with Windows 8?

  Windows 8 will give problems?

  The short answer is Yes, there are problems. There will be problems with comatibility hardware and the availability of drivers. Bugs in drivers that are technical support available, unresponsive, etc..

  Expect everything.

• It didn't install the package when I download the Flash Installer. Are there problems with Adobe?

  It didn't install the package when I download the Flash Installer. Are there problems with Adobe?

  I don't know what you've downloaded; Try

  • Flash Player ActiveX (Internet Explorer)
  • Flash Player plug-in (all other browsers)
  • Flash Player for Mac OS X

• Problem with Windows Installer (I think)

  Hey I just got a new 'game' PC with all the good things like i7 processor nvidia GTS 250 graphics card. So I guessed I would setup games. Games were installed very well the problems started when I tried to run SteamInstall.msi he looks ready to install for 1 second and then close and nothing happen. Even try to do once again nothing. So I gave up with it.

  Then I installed cod4, codwaw and download for both patches. When I try to install the patches it starts normal and after extractinng saying "" ".msi or msu or something it get stuck on the preparation for installation on both cod4, codwaw games and I think about others too... '".

  So I guess that's my Windows Installer problem... ? Windows Vista Home Premium SP2 (problems on SP1 also)

  Yoris,
  I think that if you had a problem with Windows Installer, then you would have also had a problem installing the games themselves.  If after installing just the game, you are able to start the game, then you will need to determine if you really need the patches you install.  If they fix game issues and do not add any content, then you may not even need of patches.  If it turns out that you do not have the patches and they are self extracting\installing files and then save them to your desktop and then right click and select run as administrator and see if that helps.  You can also check with Activision support , because this can be a problem they know. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with Windows Installer - installer stops and shows the dialog on the command prompts

  Hello

  I hope someone can help me with this question... I looked long and seriously, and you have tried all of the suggestions posted (cancel/save, etc.).

  I am trying to install a program and Windows Installer stops right in the middle of installation and a dialog box appears with information from command line, and the only thing I can do is select 'ok'... the program is not installed.

  Here is the info that appears in the dialog box:

  Windows® Installer. V 5.0.7601.17514

  msiexec/option [optional parameter]

  Installation options
   
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
   
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  I hope someone has a suggestion for this problem... I just bought a new laptop and Windows 7 Professional came installed on it.

  Thank you

  Linney thanks for your response!

  The file I'm trying to install is an exe file (so the SIG file is embedded in the exe file).

  I tried the option "Run As Administrator" and it did not work.  However, you gave me an idea that has provided a work around that allowed me to install the program.

  Once this dialog box is displayed with all the control switches, rather than press 'OK', I left on the screen and went in the 'temp' folder and find the MSI program I tried to install (I cross referenced the timestamp of when I tried to install it to find).

  Once I found the updated file, I clicked it, and he proceeded to install the program... I have not had any other problems with the installation.

  So, there's something wrong with the way that the exe file have been created and how the files extracted from the msi file (these are files of Intel and Lenovo - driver updates - so I think they do these things) or there is a problem with Windows Installer.

  For now, at least, I have a work around I use until I find a solution to this problem of permanent

  Thanks for your help and for taking the time to answer!

  I hope this can help someone else in the future

• Problems with Windows Installer after using System Mechanic.

  I had a problem with my Dell 2 years and was told by the Support Dell buy iolo System Mechanic. However, now I have problems with Windows Installer (it is not installed correctly) and I've read that this can be caused by the registry cleaner in the iolo System Mechanic.

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  Thank you!

  original title: Registry Cleaner/Windows Installer

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  1 no, the registry cleaners can give you immediate relief, but they are a big pain in the long term.

  2. follow the four methods listed in the resolution section of the following article:

  http://support.Microsoft.com/kb/2642495

• Are there problems with changing the IP address of a system of v5.3 ACS after the initial Setup?

  I'm migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.

  Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?

  I tried without problem. I changed the ip address of the WLC several times.

  You must ensure that:

  1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.

  2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.

  Here is the procedure how to change the ip address of the interface (according to the doc of cisco):

  http://goo.GL/0BYqVT

  I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).

  HTH

  Amjad

• Are there problems with Firefox 5.0 and 1Password 3.6.1?

  I started to update to Firefox 5.0 and noticed a message that the 1Password version I had at the time would not work with Firefox 5.0.
  Are there problems with Firefox 5.0 and 1Password 3.6.1?

  They say you need 1Password 3.6.0 or later to work with Firefox 5.0

  http://Forum.agile.WS/index.php?/topic/5319-Firefox-5-requires-1Password-360-or-later/

  http://help.agilebits.com/1Password3/firefox.html
  

• Are there problems with OS 10.11.4 and opening?

  Are there problems with OS 10.11.4 and opening?

  Upside down images in the mode list. There is no hope of any problem opening fixing. There will be no further development.

• I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I don't know about other issues. There are always 'problems' with any upgrade. You weigh against the benefits. I know that you need more RAM. At least 4 GB, maybe more if you can. Don't forget that this system is produced at a time when most of the machines have + 8 GB RAM and when Apple said 'minimum' they really mean it.  I recently inherited a MacBook that has 2 GB of RAM and the Mavericks. When I checked the memory, the use of the system was using 1.95 GB = nothing to run applications!

• I'm having a problem with "Windows Installer"... Can't find a way to heal or recharge the program?

  I'm having a problem with "Windows Installer"... Impossible to find a solution to heal or recharge the program

  Hello

  1. what question do you face with Windows install on your computer?
  2. do you have an error message regarding the Windows Installer on your computer? If Yes, what is the error message?
  3. what task you were trying to do when you got the error message?
  4. have you done any software or hardware changes on your computer before this problem?

  Please refer to the section: Windows Installer issues in the following link.

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651/#reso1

  Further,.

  Please responses to the above questions and add additional information so that we can better guide you.

• Are there problems with the copy a backup of one old drive to another?

  After buying a hard drive TB Seagate external 3 to make backups, I conclude that, because of differences in sector I can not create a backup image to the new drive.  I did an image backup on my Toshiba 1.5 TB and then copied the file to the new 3 TB drive.  While it is a pain, for the moment, I don't see anything around him.  Are there problems with it?

  Another question: If there is a question, is there a way to write the image of the file on the drive that works and then all backups incremental file at CT 3?

  Hello

  Because you can't save the picture of the system directly on your 3 TB hard drive, you can save on your 1.5 TB hard drive, and then copy it to 3 TB external hard drive.

  If you want to restore, you can restore directly from your hard drive 3 TB.

• Are there problems with Microsoft 7 and Frontpage 2002? The system shuts down when I try to add a hyperlink.

  The system shuts down when I try to add a hyperlink.  The hyperlink insertion page opens.  But when I try to click on the link that reads "Microsoft Frontpage has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  Edited to add: if I type in the hyperlink, it seems to work.  But in the past, I just clicked it.  But now when I click on it is when she stops.  Strange.  Did not this on the Vista computer.

  Hello CaptainKAG,

  Thanks for posting on the Microsoft answers Forum.

  I recommend you post in the Forum Office where this problem is related to FrontPage 2002. We can install on Windows 7, but is not fully compatible, so some features may not work properly. Office 2003 and Office 2007 are fully compatible with Windows 7.

  Click here to post in the Forum Office.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Are there problems with Vista SP2? Or have they been corrected?

  Hi, I want to install SP2 on Vista because I improve performance

  But when I installed SP1 I lost all sound and it was a real pain to get him back so I don't want a repeat of this, I also read on the SP2 problems with slowdown system, etc...
  -What is completely stable and free issue?

  Hello

  I suggest you to see this link on more information about Windows Vista service pack 2:
  http://Windows.Microsoft.com/en-us/Windows-Vista/whats-included-in-Windows-Vista-Service-Pack-2-SP2

  Follow the steps in this link to install Windows vista service pack 2:
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  It will be useful.

• Impossible to install a lot of programs in Windows 7, perhaps because of problem with Windows Installer

  This is a recent problem and I tried the reinstatement of Windows Installer, but it does not help.  I tried install update Windows Installer, but it wont install.

  Error messages include:
  Error 2203. Database: C:\Windows\Installer\607c93.ipi. Cannot open the database file. Error system - 2147287035.

  Or this:
  The Microsoft Windows Installer service is not accessible, or has failed.  This can occur if Windows Installer is not installed properly.  Try restarting your computer and login as administrator.  If the problem persists, visit the Microsoft Windows Support site and search for "Windows Installer problems.

  I tried to uninstall Windows Installer, but it is not like here. Then tried to reinstall Windows Installer, but it won't install no and no updates in the Knowledge Center applies to Windows 7.  In addition, there are only one account on my computer that has administrative privileges.

  Don't know if it's related, but lock began to appear everywhere in my desktop icons and many files...

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner