Vista backup drive does not

Similar Questions

• sleep of the iMac, don't eject backup drive does not correctly

  I get a message that my backup drive is not ejected properly, what concerns me greatly. I get this message when my iMac wakes up after sleeping, and the player has not been removed or disconnected or anything. It's an old USB 2.0 Seagate GoFlex drive.  Is there little sleep setting, such as turning off hard drives, the cause? Or is it just time to move my old faithful to a 3.0 version backup disk?

  I would like to launch disk utility > first aid on the disc to make sure she's ok. How old is the drive and how it is formatted?

• Tecra M5: Impossible to duplicate on two screens, with windows vista nvidia driver does not work

  I have installed windows vista 32-bit, the bios updated and all the drivers from the official Web site of toshiba, if I put a second screen resolution of my lcd screen to 1024 X 800, but in the external screen does not receive a signal.
  If I start the tecra with the connected external escreen account signal in this area, no signal on the lcd screen.

  Please help me think this laptop is for my boss
  Thank you

  Abel

  Post edited by: abelbass

  Hello

  AFAIK the Tecra M5 came with the graphics card Intel or nVidia.

  On laptops with nVidia graphics card, you can set a different option in nVidia Desktop Manager. for example allow several computers to office
  You should find it in the control panel.

  Unfortunately, I put t know exactly where the parameters are placed in the nVidia Manager because this notebook was shipped only with Windows XP but I'm sure that you will find.

  Good bye

• external backup drive does not open

  Format a new backup NTFS external drive, then bin all my folders. When I try to open the backup file, he doesn't know what file to use to open. When I send it to the internet to find a file it say it s a mime file and I can't find any free download to try and see if it is still the problem, every site wants diagnose me my pc for free, then charge me to download a fix that I'm not even sure will work. Any ideas would be wonderful / thank you!

  If you use the standard windows backup feature, you need to backup to the hard drive first.

  then copy it to the drive external hard usb.

  in the future, you will need to copy archive hard disk in order to restore.

• Dell XPS M1530 Windows reinstalled Vista, network driver does not

  Hi, I had to replace the hard drive on my Dell XPS M1530 because of the complete failure of hard drive.

  I installed Windows Vista and also installed all the drivers from Dell. All of them seem to work fine except the driver of Ethernet controller and wireless adapter one. I tried to download the drivers from Dell Web site, but who moved it - it comes up with this message: "the device could not be detected. Installation interrupted.

  In other words, that I can't connect to the internet, so using computer for a friend right now. Is there a driver I can download to make it work?

  Hi, thanks for all your suggestions. I tried to look at all the possibilities in terms of manually install the drivers, but nothing has worked.

  So in the end I bought a USB key external wi - fi and with that, I managed to connect to the internet. Once connected, the laptop must have then auto-téléchargé the right driver for the internal modem, because a few days later, I managed to connect to the internet even without needing the key external wi - fi.

• What is my vista backup drive for. I can run it to put vista on my com.can home not download sp1

  won't down load sp1 does sp1 with backup drive

  Hi Erieite,

  1. which edition of Windows Vista you are using?

  2. What do you mean by saying Vista family?

  3. what happens when you try to download Sp1? You receive messages or error codes?

  Backup recovery discs or Windows Vista discs are supplied by the manufacturer of the system containing a backup of the original factory condition or a favorable condition of a computer as that set up by the manufacturer of the system. This media is usually comes with most computers to reformat the hard drive and reinstall the operating system. If you use the Vista backup drive, it will delete everything on the system. You should back up important data before making any major changes on the system.

  If you receive a prompt to install the Vista SP1, then you must download and install the same. It will not be provided with the Windows Vista backup drive.

  I suggest that you perform the following steps to solve the problem of installation of SP1.

  You can read the following article and see if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  You can also consult the following articles and check.

  Learn how to install Windows Vista Service Pack 1 (SP1)

  What you need to know before installing Windows Vista Service Pack 1

  Hope this information is useful.

• backup external hard drive does not not to 8.1

  Updated to 8.1 and now my external Iomega hard drive (for weekly backup) now does not work. He appears in the "devices", but then backup will not recognize it as a valid to continue my backup option. Suggestions please?

  Hi UKPOL,

  Please refer to the how to Geek article.

  8.1 win can't stand a GUI for the backup files or imaging system. You have to use powershell or Win 8.1 reset/refresh options.

  You can also create custom refresh images. See this article. The instructions also work with Win 8.1.

  You will need to use third-party backup to back up files and folders.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.
  
  Want Phoenix 810-150se, Intel i7 4820 k
  12 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.
  
  HP 560z CTO AMD Phenom II X 6 1090 t.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.
  
  HP ENVY 17 t-j000 CTO Quad Edition laptop. I7 4702mq
  12 GB OF DDR3 MEMORY
  NVIDIA graphics
  Win 8 Pro

• How to create a bootable Windows Vista USB drive? I can't install Windows Vista with a disk because my dvd drive does not work.

  I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do

  Please send your reply to my email id, or post it here...

  Hello

  Vista is not designed to be installed like this.

  But others led to ways to do so.

  This may interest you on this subject:

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  Google will help you in this matter.

   

  See you soon.

• Graphics driver does not not under Vista

  first disable my graphics driver does not work. & I don't know how to fix or install. What should I do? that you install? I am computer jargon challenged. so if you could speak in terms I can understand & explain to me if I do not receive it. I'd be happy. TY Heather

  * original title - need a lot of help please.*

  Hello

  Troubleshooting explains how to upgrade the video driver (graphics card) and others as needed.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - graphics card - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on set to update driver
  (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with
  their own software and drivers and all other main drivers that you have.

  Now in system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), then the manufacturer of the device
  site (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and)
  software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - reset after each
  installation.

  Always check in the Device Manager - tab drivers version you install actually shows up.
  This is because some restore drivers before the most recent is installed (particularly that audio drivers) so
  install a driver - reboot - check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
  by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

• combo rom drive does not not on windows 7 and vista

  Hello
  I have a problem with my computer that my combo drive does not play a dvd in windows 7 and vista, but it works in windows xp when I boot dvd drom it stops and just reads the dvd please help

  It is an external hard drive?

  Try the fixit http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us base

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Equium A100: Audio driver does not not WinXP

  Hi, when I bought my laptop I had Vista installed on it, I installed win XP, but I had no drivers, but I downloaded Toshiba & Utilities CD tools that have all the drivers for my lapop, everything works well only realtek audio driver does not work correctly when I restart my pc error appears, I made the screenshot of it it maybe you can help me with this problem.

  Here is the link to see srceenshot: http://rstheclan.googlepages.com/error.JPG

  Have you installed the two KBs (knowledge base) of Microsoft before running the installation program driver sound?

  You can try and download the audio drivers manually and give it a reinstall. Not to mention that this error message, play sound in Windows?
  Need drivers, you can find here: http://eu.computers.toshiba-europe.com (Support & downloads)

  Another question. What Service Pack you are using? Always SP2 or SP3 brand new? With the last of them, there are sometimes problems with the realtek sound card drivers.

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.

• CD/DVD drive does not work on my Satellite L300D

  Hi all
  * I have Toshiba Satellite L300D laptop and my OS is Windows Vista.*
  I don't have any driver cd... when buying. They ask me to download from internet if any necessary driver software.
  Now if I put a cd/dvd is not readable. The option of cd/dvd drive is invisible in the my computer window.
  I renewed my anti virus and checked the laptop. There a few virus and I deleted all the viruses.
  But still my drive does not work.

  What should I do? Also, my warranty period expires last month. I'm not having any recovery cd also.
  Please give me the solution.

  Hello

  Please check if the CD/DVD drive is listed in Device Manager.
  If it s listed, then it means that ODD has been recognized by the Windows operating system.

  In this case, try this;
  -Remove the STRANGE to the list of devices.
  -remove the filters above and below of this registry key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -Reboot the laptop

  Usually, this helps.

• Satellite P20-801-WLAN driver does not

  Hello

  AI? ve formatted my laptop, I forgot to make a backup for drivers disk. I downloaded all the drivers, but W - LAN driver does not somehow.
  The Windows operating system does not recognize the W - LAN equipment. Help needed!

  See you soon
  Moiz

  First have you ever used the WLan on this laptop?
  Are you sure that the WLan CSA has been installed?

  Check Device Manager if there is no yellow exclamation point.
  Have you used a good driver WLan?
  I found on the page of the driver Toshiba Atheros, drivers Toshiba and Agere.