Vista boot, apparently due to the update
Hello
My laptop was working fine last night, but as I have turned on this morning, I am unable to boot. Windows will remain at a black screen and then give me the boot option repair or start normally. Startup Repair found a problem, that it cannot correct automatically.
I had problems with Windows Installer and I noticed before I turn it off only an update of Windows should arise, then I guess that's the culprit. If anyone could offer advice about a solution, it would be much appreciated. Thank you.
I am running Vista. Not sure if it's SP1 or 2. Apology.
Here is the log of problem:
Problem event name: StartuprepairV2
Signature of the problem 01: AutoFailover
Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
Signature problem 03:4
Signature of the 04:196611 problem
Signature of the problem 05: no Cause root
Signature of the 06 problem: no Cause root
Signature of the problem 07:0
Signature of issue 08: 1
Signature of the 09 problem: System Restore
Signature of the problem 10:0
OS version: 6.0.6000.2.0.0.256.1
Locale ID: 1033
Hello
If the issue is not material. I would like to re - install Vista to make sure that it was not
hardware and then upgrading to Windows 7, do a clean install the update.
How to do a clean install with a Windows 7 upgrade Version
http://www.SevenForums.com/tutorials/31402-clean-install-upgrade-Windows-7-version.html
Don't forget to check with the manufacturer of system as most have help on upgrading to Windows 7
BIOS updates and drivers from the chipset level low and other main device drivers.
Run the Upgrade Advisor, and check with the center of compatibility for your key features.
Some system manufacturers also have an online help and information for the upgrade to Windows 7.
Windows 7 Upgrade Advisor <-- run="" this="">--> http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx
Also check the Compatibility Center
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?
They are only updated office or all updates?
For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx
then manually download and install the same.
If all updates, perhaps consider the following general tips-
Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.
Method 1: Save the Windows Update files
1. Click Start and type notepad in the box start the search.
2. click on Notepad in the list programs.
3. copy the following commands, and then paste them into the opened Notepad window:
REGSVR32 WUPS2. DLL/S
REGSVR32 STINKS. DLL/S
REGSVR32 WUAUENG. DLL/S
REGSVR32 WUAPI. DLL/S
REGSVR32 WUCLTUX. DLL/S
REGSVR32 WUWEBV. DLL/S
REGSVR32 JSCRIPT. DLL/S
REGSVR32 MSXML3. DLL/S
4. in Notepad, on the file menu, click Save as.
5. in the file type list, click all files.
6. in the file name box, type register.bat.
7. save the Register.bat file to your desktop.
8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
9. try to reinstall updates.http://support.Microsoft.com/kb/958053
See: method 1: save the Windows Update fileshttp://support.Microsoft.com/kb/326253
Method 5: Registry Windows Update engine fileshttp://support.Microsoft.com/kb/971058
How to reset the Windows Update components?Method 2: Download and install Windows Update agent
Windows Update Agent
How to get the latest version of the Windows Update Agent to help manage updates on a computer
http://support.Microsoft.com/kb/949104Information for network administrators about how to obtain the latest Windows Update Agent
http://support.Microsoft.com/kb/946928Click Start, click run, click Browse, navigate to the file you saved and click Open.
Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce
Click run.
Follow the steps to complete the wizard.
Important
To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.
Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.
Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.
D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)
TaurArian [MVP] 2005-2010 - Update Services
-
My Windows 7 laptop suddenly stopped recognizing a device (mobile phone), apparently due to the error Code 43! Any ideas how to sort?
Thank you George for taking the time to answer. I had already tried everything you suggested, but to no avail. I've sorted it now though. It was, quite simply, a defective USB cable!
-
Windows Vista crashes due to the update of windows
I just reinstalled Windows Vista 32 bit on my Lenovo PC after experiencing problems due to a virus. However, during the execution of that Windows update, I started noticing problems because my computer would freeze randomly. Neither the mouse nor keyboard would allow me an entry stop properly or to restart the computer, so I had to cut the power, whenever this happens. on the way back - turn on the computer, I noticed that the operating system is trying to update something and fails or succeeds every time. I know not why this problem occurs because I have a decent amount of DDR2 RAM (2 GB) and have even stopped to try to alleviate the problem of automatic updates.
could someone please tell me what I could do to solve this problem, I try to install service pack 2 and see if this corrects the problem even though I have my doubts, it will be
If you have backed up your data, format your hard drive, and then a clean installed Vista, STOP READING HERE and reply to this message.
==============================================
Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows. Please note that another repair facility (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxNB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Measures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspx~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
64-bit Windows vista hangs after you run the update
Hello
Last night I ran the update of windows on my 64 bit vista laptop, he said there are 2 updates important (I don't remember what they were) and 1 optional (for security essentials). I chose to install them all, let run updates, restarted the computer when he was asked and then pinned the problem. Windows starts up nicely, all my startup apps pop up like normal (things like security basics, steam, etc.) and, if I don't touch it, it looks fine. Sometimes I can get as opening firefox, sometimes just moving my mouse t - it, but the computer just hangs. I can still move my mouse (sometimes it turns in a circle, as the computer working on something) but I can't click on anything whatsoever, cannot Ctrl + alt + delete... my only way of l ' down made a difficult start.
I tried to use the tool of the previous version to roll back to before the update, the Wizard works well and said completing, but I still have the same question. If I'm in safe mode or safe mode with networking, it works fine. I even tried to delete pending.xml to see if it was an update stuck but who did not (cmd said that there was no pending.xml found to remove)
Anyone know what this might be or how to fix it? I'm fresh out of ideas
HelloGiven that everything works well in safe mode which makes them a third-party application causes the computer to freeze.You need to perform a clean boot to find the program that is causing and then disable or remove.
Here are the steps to do:
1. click on start, type msconfig in the search box and press ENTER.
The user account control permission.
If you are prompted for an administrator password or confirmation, type
password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load starting points.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
If the problem is resolved to check what is the cause of the problem, referring to the link given below:
http://support.Microsoft.com/kb/929135
8. in addition, you will need to uninstall and reinstall the software problem on your computer.
Reset the computer to start as usual
9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
Click Start, type msconfig.exe in the start search box and press ENTER.
10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
11. When you are prompted to restart the computer, click on restart.
For more information, refer to the article below.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Windows Vista boot problems, after an automatic update
Can someone help me with the boot?
When I start my laptop it goes until is displayed: 'No configuration update 3 of 3' and all stays at 0% for 1 or 2 minutes and after it stops automatically. It restarts again and appears the same following 2 minutes and stops.
How can I fix this without having to install the DVD? I don't have the installation of my Windows DVD. But with on DVD with also windows vista, I tried to fix it, he showed me that it is not a compatible version of vista on the DVD.Hello
I guess that part of the question could be a driver which is really old or similar should not be loaded.
This exit Windows updates on (after you have access) and stop the updates of the driver to load.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx---------------------------------------------------
You can use the solutions in this KB - 3 methods and I listed a little help for them below
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358Method 1: Start Windows Vista with the Windows installation media and use the repair feature
How to do a startup repair in Vista
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlYou can also do a safe mode startup repair to access the Recovery Options If you have them available
or use the DVD as described above.This tells you how to access the System Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlMethod 2: Start the system in safe mode and then use the system restore feature
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can also do a restore of the system of starting with a Vista disk.
Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)
See article below for that.
You can use this method on the updates that have this problem.
http://support.Microsoft.com/kb/949358Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
and install it.Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx------------------------------------------------------
Once you are in Windows I was running once again reset here as a precaution.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Hope this helps sort it out for you.
Rob - bicycle - Mark Twain said it is good. -
My Lotus iNotes will no longer send emails due to the update of windows
My Lotus iNotes is no longer send emails, however still receives. I keep getting error messages. It's already happened and my work, IT supports the Office told me that it was due to a Windows security update, but my computer has recently updated its self, does anyone know what update would it?
Hello
1. What is the full/exact error message?
2 were there any hardware or software changes made on the computer before this problem?
3 is specific to the program the issue?
Initially check updates have recently been installed on the computer.
See the Windows updates are installed
http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
Follow the steps and check if that helps.
Method 1: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
http://support.Microsoft.com/kb/929135
Note: follow step 7 to reset the computer to start as usual after the boot process.
Method 2: The problem can also be caused by your security such as anti-virus program that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable the anti-virus and check the result again. You must activate new security that you was disabled programs.
Disable the antivirus software:
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-softwareImportant note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3: System Restore -it takes the computer to the point when the problem did not exist. See if you can find a restore point right where the problem had not demonstrated upward.
Reference http://support.microsoft.com/kb/306084What is system restore?
http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restoreAfter restoring the computer to a previous point, you need to install the update, one at a time to verify the update is the cause of the problem.
Let us know the status of the issue.
-
Vista - boot failure after installing Windows updates
Hi, I use windows vista and for the last two days every time I shut down my computer, load 16 updates. Then when I restart my computer, it will start up repair and system restore. It would seem that these updates are causing a problem launching. 4 are the updates for office 2007, so I don't think it's one of those at the origin of the problem, but the other 12 are related to questions of security and authentication with vista and I suspect this is one of them. Help, please! I copied the updates below.
A security update cumulative for Internet Explorer 7 for Windows Vista (KB2360131)
Download size: 7.5 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
Security issues have been identified that could allow a malicious user to compromise a system running Microsoft Internet Explorer and to gain control. You can protect your system by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.Microsoft.com/fwlink/?LinkId=202013Help and Support:
http://support.Microsoft.comUpdate of security for Microsoft Office Excel 2007 (KB2345035)
Download size: 8.5 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A vulnerability of security in Microsoft Office Excel 2007 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.
More information:
http://support.Microsoft.com/kb/2345035Help and Support:
http://support.Microsoft.com/?ln=en-usUpdate of security for Microsoft Office Word 2007 (KB2344993)
Download size: 8.8 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A vulnerability of security in Microsoft Office Word 2007 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.
More information:
http://support.Microsoft.com/kb/2344993Help and Support:
http://support.Microsoft.com/?ln=en-usUpdate of security for Microsoft Office System 2007 (KB2344875)
Download size: 7. 4 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security vulnerability in the 2007 Microsoft Office System and the Microsoft Office Compatibility Pack that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.
More information:
http://support.Microsoft.com/kb/2344875Help and Support:
http://support.Microsoft.com/?ln=en-usUpdate security for Windows Vista (KB2207566)
Download size: 189 KB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified that could allow an unauthenticated remote attacker to bring the affected system to stop responding. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
http://go.Microsoft.com/fwlink/?LinkId=201705Help and Support:
http://support.Microsoft.comUpdate security for Windows Vista (KB2281679)
Download size: 357 KB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
http://go.Microsoft.com/fwlink/?LinkId=201722Help and Support:
http://support.Microsoft.comUpdate security for Windows Vista (KB2296011)
Download size: 1.1 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
http://go.Microsoft.com/fwlink/?LinkId=201086Help and Support:
http://support.Microsoft.comUpdate security for Windows Vista (KB2378111)
Download size: 12.0 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
http://go.Microsoft.com/fwlink/?LinkId=201098Help and Support:
http://support.Microsoft.comUpdate security for Windows Vista (KB2387149)
Download size: 557 KB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
http://go.Microsoft.com/fwlink/?LinkId=201703Help and Support:
http://support.Microsoft.comUpdate security for Windows Vista (KB979687)
Download size: 881 KB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
http://go.Microsoft.com/fwlink/?LinkId=190553Help and Support:
http://support.Microsoft.comUpdate security for Windows Vista (KB979688)
Download size: 216 KB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
http://go.Microsoft.com/fwlink/?LinkId=190553Help and Support:
http://support.Microsoft.comUpdate security for Windows Vista (KB981957)
Download size: 1.0 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified that could allow an authenticated local attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
http://go.Microsoft.com/fwlink/?LinkId=201093Help and Support:
http://support.Microsoft.comUpdate security for Windows Vista (KB982132)
Download size: 118 KB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
http://go.Microsoft.com/fwlink/?LinkId=194560Help and Support:
http://support.Microsoft.comUpdate for the filter of junk e-mail in Outlook 2007 (KB2410711)
Download size: 3.1 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
This update provides the filter of junk e-mail in Microsoft Office Outlook 2007 a more current definition of which e-mail messages should be considered junk e-mail.
More information:
http://support.Microsoft.com/kb/2410711Help and Support:
http://support.Microsoft.com/?ln=en-usUpdate for Windows Vista (KB2345886)
Download size: 1.3 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
Install this update to help strengthen authentication information in specific scenarios. After you install this item, you may have to restart your computer.
More information:
http://go.Microsoft.com/fwlink/?LinkId=202472Help and Support:
http://support.Microsoft.comWindows malicious software removal tool - October 2010 (KB890830)
Download size: 2.6 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
After the download, this tool runs once to search your computer infections by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and remove infections found. If an infection is detected, the tool displays a status report the next time that you start your computer. A new version of the tool will be offered each month. If you want to manually run the tool on your computer, you can download a copy from Microsoft Download Center, or you can run a version online from microsoft.com. This tool is not a replacement for an antivirus product. To help protect your computer, you must use an antivirus product.
More information:
http://go.Microsoft.com/fwlink/?LinkId=39987Help and Support:
http://support.Microsoft.comI had a similar problem. The update worked for me was KB2360131, I had to hide and the rest updates went well. This is what I did:
(1) turn off the automatic updates
(2) set up the Windows Update service manual init
(3) restart
(4) delete C:\Windows\SoftwareDistribution directory of the Windows folder
5) go to the Windows Update site and search for updates
(6) once he finds all the updates, go to the list and hide KB2360131
(7) install the rest
It will be useful.
-
error 646 when windows update, fails to 4 updates. Using vista OS. Help
Hi cjvtex,
Welcome to the Microsoft Answers site!
This problem occurs when the Windows Update Wups2.dll agent file is incorrectly registered in the register. Because registry files that match
to the Wups2.dll file are missing, update facilities are unsuccessful. Follow the steps mentioned below to resolve this issue.Save the Windows Update files
1. Click Start and type notepad in the box start the search.
2. click on Notepad in the list programs.
3. copy the following commands, and then paste them into the opened Notepad window:
REGSVR32 WUPS2. DLL/S
REGSVR32 STINKS. DLL/S
REGSVR32 WUAUENG. DLL/S
REGSVR32 WUAPI. DLL/S
REGSVR32 WUCLTUX. DLL/S
REGSVR32 WUWEBV. DLL/S
REGSVR32 JSCRIPT. DLL/S
REGSVR32 MSXML3. DLL/S
1. in Notepad, on the file menu, click Save as.
2. in the file type list, click all files.
3. in the file name box, type register.bat.
4. save the Register.bat file to your desktop.
5 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or confirmation, type
the password or click on continue.6. try to install the updates again.
Access this link to thread for more solutions and ideas to resolve the error 646. It can be very useful for you:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
blue screen and restarting the round due to the update of windows
Windows Update-
Configuring updates step 3 of 3... 0%
* Blue *.
* restart *.
Configuring updates step 3 of 3... 0%
* Blue *.
* restart *.stuck in a death spiral
safe mode, says I need to enter the command ' rstrui.exe / OFFLINE:C:Windows.
to get to the system restore.
I do it, so he said there is no restore point when I KNOW there is.
I need your help D:
* cries *.I don't even tell it to do updates , but it still it still... I just put it to sleep, then I find it panic!
Hi Lily T,.
I suggest that you provide a blue error screen make sure to disable the auto restart for windows update
http://support.Microsoft.com/kb/555444
For more information, please follow the link below?
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358 -
No sound, probably due to the update of windows
Just a windows update last night, no sound at all on my computer now. Equipped with Vista.
Just a windows update last night, no sound at all on my computer now. Equipped with Vista.
=======================================
Perhaps the following goods range offers a few ideas:Windows 7 - no sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
(valid for XP - Vista - 7)Windows Vista-
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems(948481) how to troubleshoot sound
problems that you experience after having
install a Service Pack for Windows Vista
http://support.Microsoft.com/kb/948481/Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
No noise in web browsers, probably due to the update of windows
Background-
A week ago, my browser (firefox) has stopped playing all sounds. Spotify, Winamp, etc. were all still works fine, so I assume that it was not pregnant-related, but rather something to do with the browser. I checked the updates of the plugin, flash etc, everything was up to date. I tried another web browser (Google Chrome), same problem. I then tried the things usually offered on the internet such as checking msacm32.drv is present, check that nothing is cut in the mixer volume, also attempted to execute a file that fixed my registry, but I received an error. I also ran a codec tweak tool & who said everything was fine.
I ran out of ideas so don't have a restored system about a week ago (about when I thought that the problem started), and voila, my sound was back.
However, windows this morning updated itself (I'm on windows vista), and now my sound disappeared again. As I am quite computer illiterate, I am struggling to understand what is causing the problem.
The installed updates today were:
http://img.Photobucket.com/albums/v19/Magdalena/windowsupdate.jpg
Hey SarahMagdalena,
Step 1:
Try resetting Firefox and Mozilla browsers.
Step 2:
You can see the below article to check sound issues in Firefox.
http://support.Mozilla.com/en-us/KB/no+sound+in+Firefox
Kind regards
Savan - Microsoft technical support.
-
Hard drive failure due to the update of El Capitan
Hello world
I recently downloaded the update of el capitan and as many had the following problem.
Downloaded and update when installing, I get an error message saying that she didn't and to
Restart and try again. Tried several times but nothing helped. According to previous discussions
I tried the following.
1. start in safe mode - failed
2. start in recovery mode.
-disk checked ok but the repair disk fails.
Re-install osx - Fail
Re-install time machine backup - fail.
Does anyone know if it is possible that simply trying to update software might
Screw up my hard drive? Before the hard drive update had no issue. When I run
Disk fix 95% success and fails at the end!
Stuck for what to do at this point so any suggestions welcome thank you!
I was running a macbook pro 2011 on Yosemite luckily before that!
Does anyone know if it is possible that simply trying to update software might
Screw up my hard drive? Before the hard drive update had no issue. When I run
Disk fix 95% success and fails at the end!
HD can fail at any time, your decided to fail while you were doing an update. Nothing but bad luck. Remember to replace the HD with an SSD.
-
She made no answer due to the update of the system interuppted reference satellite
during the update system was interrupted, now there is no response to all the
What do you mean by system update?
Have you tried updating the BIOS or Windows operating system?Like the safe for laptop computer using a startup disk recovery disk windows, Linux on the live disc, etc?
Disconnect the power adapter and remove the battery wait some time for example 1 hour.
Then reconnect both sides and try to turn on the unit. -
No sound due to the update of the Bios
After the recent update Bios my computer's speakers is no longer working. I was able to reset the speakers and have since been able to watch videos youtube with the sound but WMP or Quicktime no longer work and I get an error message whenever I try to view a vid. I saw that it is supposed to be a solution for installing an older bios, but it asks you you must have an ID, etc.. In addition, since the update my computers performance has been lackluster to say the least. Any help would be greatly appreciated. HP needs to fix to fix this fast, I made videos & ads for my employer, and it is a huge inconvience!
I was able to find a solution... If you go to http://h10025.www1.hp.com/ewfrf/wc/prodTopCategory?cc=us&dlc=en&lang=en&lc=en&product=18703&dest_page=product
Choose your exact system (you can also access this your support assistant go find help and choosing access resources online for your PC) - then choose software downloads and the driver - choose your operating system - select driver / audio and choose a. I chose the one from 2012-8-13. Save the download to your desktop and run it.
WMP, quicktime, itunes & all work again. Performance issues also declined. Good luck and best regards!
Maybe you are looking for
-
Send a heavy video...
I shot a pretty heavy video with my iphone. now I want to send it via dropbox but I get an error message...? What are my alternatives to transfer it to my mac computer please?
-
2 monitors connected again MacBook?
I run two 27-inch monitors in my office connected to my MBP. Can I connect these monitors for the new MacBook? Thank you.
-
If I understand that apple Pages found have no regular expressions, I'm wrong? Is it possible that I can find and remove a space before an entry?
-
I have a new pc and I am trying to restore my favorites
I did a backup (that is saved as a document in firefox), but how do I get the new version to recognize? I already copied the file to the new profile in program files, but he can't see it (don't know not what version of firefox I had before (think it
-
Seriously do the end of my tether with my Y560 - from time to time (often enough that it is becoming quite a nuisance) the mouse cursor suddenly becomes very large and pixelated. I replaced all drivers with those newer to the Lenovo Web site and had