Vista cannot connect to Blackberry__

Similar Questions

• HP pavilion d4790y windows Vista cannot connect to internet unless you use WEP wireless

  I have a HP Pavilion with Windows Vista 32 bit home premium d4790y.  I can connect to my ISP wireless router using the HP internal network adapter, but the connection between the router and the internet does not work unless I downgrade the router security to WEP.  If I connect to the router via a wired connection, I can connect to the internet without problem even with WPA2.  I did all the troubleshooting steps recommended as reset the router to check updated network adapter, uninstall/reinstall the network adapter driver, driver release and renew the ip configuration, etc.  Information?  Is there a newer driver that is not recognized during the update search process?

  Hello

  It is a hardware thing and the wireless card does not support this. Changing the wireless card can be the way to go.

  I hope this helps.

• Vista cannot connect to the printer

  I have three computers, one with XP and one with Vista Home and one with Win7.  XP has an attached Cannon printer that is shared on the network.  It worked well for a long time.

  I recently had a wifi attached Kodak esp6150 printer I installed over the old Canon.  It works well from all three computers.  Since installing it however the Vista computer is no longer can find Canon printer on the XP computer.  So I tried to add a printer in Vista.  It shows the printer in the list of printers connected to the network, but when I select and tell Vista to add it I get the error "unable to connect to the printer.

  Okay, I went back to a restore point before the Kodak and Canon fine works again.  I reinstalled Kodak software and both printers worked ok maybe half an hour and the cannon disappeared Vista again.

  The world is - that sound familiar at all?  No idea how to get Vista to recognize the two printers like XP and Win7 are happy to do?

  Thank you.

  Bill

  Okay, I think I got my problem solved from information found elsewhere on the web.  The trick seems to be to tell Vista to install the printer working for the Canon even if it is a shared network printer.  And create a local port with the name \\XPserverName\PrinterName.

  But as I said, this is necessary if the Kodak is installed.  Otherwise Vista see the Canon as a shared network printer.

  Bill

• Windows Vista - cannot connect you

  Can't sighn in windows

  Hello

  Password problem?

  The Microsoft Community cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  Microsoft's strategy concerning password lost or forgotten (KB189126) - has the help
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password (Vista and Windows 7) doesn't help
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Computer laptop Windows Vista cannot connect to shares on my Windows 7 desktop. It requires a username and password, but it does not work.

  original title: Vista to Win 7 networking issue.

  I have a Vista laptop that I am trying to use with a desktop running Windows 7.  I try to use the file and printer sharing.  I have no problem with internet connections through my U-Verse gateway.  I am also capable of sharing files from the Windows 7 Desktop, but when I try to access the Windows 7 laptop computer it askes for a user name and password.  I passed to the page Advanced Networking two computers and confirmed that the network discovery, file sharing, public folder sharing, and printer sharing are all 'ON '.  Protected by password sharing is 'OFF '.

  The problem seems to come and go.  Sometimes I can get it to work, was not.  Sometimes, it works once but not a few hours later even though computers have not changed or been restarted.

  A note more than I also use an XP laptop on the same network, and it connects more reliably.

  Any help is appreciated!  It drives me crazy.

  Charlie

  When I just opened the page to display the status of 'group', the system started working.  I have not made no other changes but Vista laptop now recognizes the Office!

• "" Windows Vista cannot connect to my network, error message "network not found path.

  I have a laptop Windows Vista, up until yesterday, I was able to connect and browse my network, now the computer shows just 3 computers, always in the same network, which connects in the same router, nothing has changed in the network environment, I can just browse the network, when I try to log in as \\[ipaddress] it says "path not found network". , but if I run cmd and type 'ping [IP address]' computers meet the ping.

  Can someone help me, thanks!

  Hello

  I suggest that you post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/threads

• I have Windows Vista cannot connect to internet.

  I can't connect to the internet via my Windows Vista computer. I'm going to use my computer laptop girls to send it. I get a message saying, for example,www.siteadvisor.com is not set up to establish a connection on port "World Wide Web service (HTTP)" with this computer. I can't even connect to Microsoft.com to get relief. It was working fine before you go to bed one night. I woke the next morning to find the new Windows updates and I that I could not establish an internet connection. I had services wireless for about 2 months now, but don't think that this is the problem because it says I have a great connection. I get this a message from McAfee that I have a Trojan horse. Could it have caused the problem? What should I do to fix this?

  It might be better for you if you post this question on the forum Internet Explorer:

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• My laptop is one of the 4 home cannot connect to the internet, it's Vista and it has connected w/Ethernet no problem, I called Xfinity tech, that says, is the problem of configuration! Can you help me?

  Acer laptop, Vista is, she can connect wirelessly with my friend modem but my house, she can't, I use the service of Comcast, they checked the modem is fine, they think that the problem of configuration! I'm not computer too, thank you!

  Ryan (Shih Chi)

  Hello

  How do you try to connect the computer to the House? Wired
  or wireless?
  Try the methods provided and see if it helps to solve the problem.
  Method 1:
  Check out the link and follow the troubleshooting steps in the article.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  If you try to connect to t Wireless net work then refer to this link and follow the steps.
  Connect to a network with Windows Vista wireless
  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx
   
  Method 3:
  Reset TCP/IP on your computer and check. Check out the link and follow the steps.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
   
  Method 4:
  You can also visit this link and follow the steps.
  
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us
   
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista cannot create a ad - hoc connection if not connected to a router

  Summary

  I am trying to create an ad - hoc between my iPhone and my VISTA laptop connection. It works as long as my laptop is connected to the router. If I disconnect I can not create the ad hoc network more (error message "Windows cannot setup ").

  What I'm trying to accomplish

  Get a wireless connection between my iphone and my VISTA laptop without a router or wireless access point. Basically, I use my iPhone as a webcam, connected to the laptop, where an application processes the data stream. I do it in different places, without internet access.

  Detailed problem description

  VISTA not connected to a network

  1. open the network and sharing Center

  2. click on "set up a connection or network.

  3. click on "Configuration of the wireless ad-hoc (computer to computer).

  4. click on "next".

  5 network name 'ad - hoc test 1', type of security: no authentication (Open), click "next".

  6. Windows returns : "Windows could not set up ad-hoc test 1.

  If I repeat the same procedure with my laptop connected to the router (wired or wireless)... It works without any problem.

  Any ideas what could be the problem and how to solve!

  A big thank you and a happy new year 2011

  Emanuel

  Hello

  The iPhone needs to be configured for Ad - Hoc with a different IP address like 192,168.1.6

  Perhaps this page can provide better instructions on a different route.

  http://alaashaker.WordPress.com/2009/03/27/connecting-your-iPhone-to-your-laptop-using-a-wireless-ad-hoc-network-iPhone/

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot connect to internet after auto update under Vista.

  Original title: System shows the connection, but cannot connect

  After an automatic update in Vista in mid-August I can no longer connect to the internet.  My system tray shows that I am connected but I can't.  I'm on a DSL wireless connection with a desktop computer (one does not) and a laptop with XP that always works very well.  I re - configure the modem, uninstalled, and reinstalled the wireless card, has run an anti-virus in safemode, uninstalled the Qwest connection network and re-installed AND uninstalled the update to Vista.  I even tried the system restore to an earlier time.  Nothing.  Internet diagnosis says that it cannot solve the problem.  I have read other forums on the UN-checing proxy settings but mine have not been verified.  I re-set my settings IE8 by default.  Uninstall protection against viruses... What did I miss?

  Hi dozerman5676,

  -You receive an error message/code when you try to connect to the internet?

  Follow the steps below:

  Method 1:

  Access the link below and follow the troubleshooting steps mentioned in the article for a possible solution:

  The problems of Internet connection

  Method 2: Reset Internet Protocol (TCP/IP)

   

  To resolve this issue automatically, click the fix this problem link. Then click run in the file download dialog box and follow the steps.

  See How to reset the Internet Protocol (TCP/IP)

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot connect to Windows Vista due to password problem

  I have a Dell XPS computer laptop model PP28L and run Vista Home Premium. When I bought the computer I bought in a pawn shop. Of course it was sold with no records at all. No recovery or restore of Windows disks. I have a valid Microsoft "proof of License'for my Vista Home Premium. Should I be reinstall Windows and if yes how I'd get the disks.

  * original title - cannot connect on Windows Vista Home Premium because someone changed my password, deleted my ID of the administrator and the guest connection. I am in the *.

  Your only option is to do a clean install of Vista.  There is no free, download of the disk.  Contact the manufacturer of the computer and they may be willing to sell you a set of recovery disks to reinstall the system (but you will need 23 digit product key to activate it in all probability even if sometimes it is not necessary when it is made with recovery on the same computer discs).

  Here is Microsoft's policy on software lost: http://support.microsoft.com/kb/326246 you can see is not much help.

  If you can borrow an installation disk of Vista genuine of the same size of the bit of ANYONE, you can use that with your product key to re - install the system and start over (you get a new administrator account and set your own password for him - or to leave empty that you choose).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Skype cannot connect questions?

  Since the upgrade to the 6.2 Skype, im unable to use Skype,

  After I log in, it seems that he might sign, but this loading screen takes a lot longer then usual, (about 1/2 minutes), then he had to cancel my sign with the comment (!) Skype cannot connect)

  before the update of Skype, it was working fine,

  to try to solve this problem, I did all the following:

  start/stop, given the time just incase it was problem maintence

  uninstalled/reinstalled

  (would of downloaded a previous version, but they abandoned their) so it is a no

  deleted file share.xml

  modified advanced connection options

  all these are done, and not a change in which the "Skype cannot connect" is different

  Help!

  Vista Windows

  Skype 6.2 (does not not as shown above)

  Internet connection very well
  before the last 6.2 versions, only the 6.2 update is the only thing I changed in where im getting this error

  Try to configure Panda:

  http://community.Skype.com/T5/Windows-archive/Skype-can-t-connect-at-click2call/m-p/920654#M92559

• OfficeJet 6600: cannot connect computer laptop 2nd in officejet wireless 6600 works fine on another computer

  Assistant on the computer Vista laptop found my wireless Officejet 6600 work that runs on another computer, but the wizard cannot connect it.  Gets the error code 0 x 00000643. Looks like a software problem in the laptop Vista.  It worked before on this laptop.

  Any suggestions?

  Hi @dburbage,

  I'm looking forward to see this resolved. Thank you for your patience and perseverance. Please follow the steps in the following document and let me know the result; HP monofunctional and MFPs - Windows: during the Installation of the network, a software "Installation error 2081883401: failed to uninstall the device with serial number:..'. Error Message on the computer.

  Thanks, I look forward to hearing back on your part.

• Games for windows live cannot connect

  Games for windows live cannot connect to the internet, this problem started last week when I tried to play Dawn of war 2 online. At that time I was running Vista Ultimate 64 bit and after exhausting all existing boards on this site and many others, I decided to completely format my PC and start again with Windows 7 64 bit, but I have the same problem exact. only now my profile is no longer stored on my PC because I formatted so I can still play offline.

  After trying to connect, it says "the profile could not be connected to LIVE. "There may be a network problem or the Windows Live ID service may not be available" option on the GFWL client network status says:

  NIC: Local 2 network connection

  Internet IP address: not connected

  Local IP address: 192.168.2.9:0

  System link address: 192.168.2.9:3074

  Account PC: PC.000000000000

  UPnP: Not signed in

  PC ID: 0X10DF99910D0A00E8

  I have made the following recommended to others in similar situations, has passed all the recommended ports (TCP 53,80,443,3074) and UDP 53,88,3074, installed and running Windows fix it, Microsoft.Net 4.0 update, installed and run Winsockfix, disabled windows firewall (I have not installed any other protection software yet) compatible UPnP on my router, changed my static connection type and still no progress. My router is supported and I am in a country supported direct (UK). This my independent being, but I also experience certificate errors when you use Microsoft sites, which is strange as I said that the Web site of the company that developed the program that I use is dangerous. It's my totally finished in guys any help would REALLY be apreciated. Cheers.

  I can't believe ive finally resolved, hours after validation. the button on my motherboard battery had been dislodged and my date and time have been reset in 2009, whenever I stop my PC. everything is working fine now GFWL working and no more certificate errors.