Vista detects no not my wifi? urgent please

Similar Questions

• HP Slate 6 update failed. Not started. Urgent please.

  Dear Sir/Madam,

  I received today a new update of the system. my camera does not open after that you install.
  just in the recovery menu appears with a constant dead android icon.

  Please
  Where can I download the recovery file, I need to reinstall my device.

  give me a link please for these files

  my camera,

  HP SLATE VOICETAB 6 6004EN

  NMR: HSTNH-B19C

  P/N: G3N01EA #ABB

  Hey @OrangeRanger,

  The update.zip packages were added on the site last week. You can find images of recovery for your Tablet here:

  • Google Android KitKat restore Image for HP Slate 6 VoiceTab - Europe, Middle East and Africa
  • Google Android KitKat restore Slate HP 6 VoiceTab - India
  • Google Android KitKat restore for HP Slate VoiceTab 6 - Latin America
  • Google Android KitKat Image Restore for HP Slate VoiceTab 6 - Southeast Asia

  Thank you.

• "MP drivers has not been system" URGENT please help

  Hello

  I just bought a new canon mg5350 flia. I tried to install it for the last 3 hours! All I get is the message drivers mp has not been installed. I tried from disk and directly on the canon site. The two get to this message. The installation wizard attached the device wireless to the computer without problem, but will not install the drivers or software. I tried to connect via usb also cable and just having the same problem.

  I use a HP touchsmart 520 pc that runs on windows 7.

  Thank you

  Kate

  Hello

  I suggest to check the following link and check if it helps.

  http://www.Canon-Europe.com/support/Consumer_Products/products/Fax__Multifunctionals/inkjet/PIXMA_MG_series/PIXMA_MG5350.aspx?faqtcmuri=TCM:13 - 854020 & page = 1 & type = faq

  More information: Problems installing and uninstalling programs on Windows computers: http://support.microsoft.com/kb/2438651

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

  Wireless connections

  I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

  Hello

  I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

  You can also try the following methods and check if it helps.

  Method 1:

  Update a network adapter driver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Troubleshoot network adapter problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• Laptop HP 15-d003se: NOT of Wifi on Hp 15-d003se

  HELLO EVERYONE! Hoping someone can help me.

  So, the thing is that I do not have wifi on my Hp 15-d003se at the present time. I don't know what happened, all I remember, it was last week (May 21, 2016) when I'm trying to connect to my wifi cousin, there is no wifi icon. I did some research and finally fell on one of the forums and had solutions, things like go to device - network cards Manager - disable, enable Ralink. I did this and IT WORKS.

  Here is the real problem now, two nights ago (May 25, 2016) when I'm trying to connect to our home wifi, there is no icon of wifi on my laptop once again, so I'm assuming that the case is the same that I mentioned above, I tried to redo the procedure , but only this time, it's totally different. One installed in my network card is more PCI Family Controller and not the Ralink. And when I tried to scan Wifi, it just said "" there is no Wireless Wifi/connection installed in this unit. I don't know what to do here. How can I retrieve my wifi?

  Help, please!

  H @Duuhnisse,

  Welcome to the HP Forum!

  I'm happy that you've become a member of the HP Forum.  It's such a wonderful site to find answers and advice. Here is a link to guide you to have the most rewarding experience and respond to concerns about detachment:

  First time here? Learn how to post and more

  I understand that you have a problem with your Wi - Fi. Recently, when you tried to connect to your home network, there was no icon. When you check only the family PCI controller has been registered the Device Manager and not the Ralink.  When you scanned for Wi - Fi, you received the message that there is no installed wireless device.

  First of all, I would like to try a reset hard or forced:

  HP laptops - use Hard Reset to solve software and hardware problems

  You can also try a restore to when he saw and work:

  HP computers - using the Microsoft System Restore (Windows, 10, 8)

  If the problem persists, go to the Device Manager and click on "Action" up and analysis of the material changes.  If the Ralink is still not found, is it recognised in bios? If it is seen by the bios, and then run a test without thread about this:

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  If it is not recognized by the bios or it has failed the test of material and that you are under warranty, please contact HP support for help.

  Please contact HP to Contact HP Supportassistance.

  If the Ralink WiFi card is registered and that you are having problems with your wireless network, please read this post on "Common fixes for wireless connectivity problems by @ great Deku tree:"

  Common fixes for wireless connectivity problems..

  Please keep me updated on your progress.

  Please click on the "Twww.Mountainview.rsb.qc.ca Up ' below to thank me for my efforts! If one of my posts will help you to solve the problem that you are experiencing, please click the "accept as Solution" so that other people who may have the same difficulty can find the answer more effectively. Thank you for participating in Forums of HP!

• Vista PC will not read or play my CD

  my pc will not read or play my CD. fix Microsoft Center ran a test and said that the media isn't readable but did not offer a solution. I'm looking for a way to fix it?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• MI, iPhone 4S no detecta don't redes wifi

  Hola.Tengo an iPhone 4S that I worked perfectly until a bright idea to fornuis 2015 tuve finals an iOS 9. Habia visitado diverse web pages to see if the podia traer algun problema/s en mi device type change y todas decian than iOS 9 worked correctamente en el iPhone 4S.

  Actualice y entonces descubri than mi movil no muy don't redes wifi. Decommissioning of United Nations immediately did an iOS than por unos dias allowed Apple, el 8.4.1, there as long as I have currently. Barcelona el problema persists. The parece Cuando me detecta don't redes wifi y soy capaz conectarme an ellas, aunque no suele permanecer conectado 1 minuto mas. The mayoria of las veces is is buscando sin find none. Does control to no can not conectarme voy al centro Cuando (deslizando el dedo hacía arriba abajo) y desactivo el wifi con the intention is to apprehend a activar, pero el device is is pillado, is magnitude y tengo than reiniciarlo. Tras volver has encenderlo, the mayoria of veces el "boton" del wifi is sombreado y no me already himself, tampoco mediante clamp.

  Como podreis understand esto acarrea some problems, como as hasta hace a by of weeks (to milagrosamente me was una solo mientras loading) wearing casi 30 weeks sin realize una copia backup. O algun my por el reason than sea uso red 3G a poco mas lo debido, last days of said unless my is me acaban los datos y estoy como TR no internet had.

  hace 4 Años as compre el Móvil, of primera mano, y comprendo Québec are esta viejo, y tengo the intention of comprarme any in a futuro proximo. Pero realmente're fastidioso cuanto menos as por una ocurra algo asi software change.

  In su momento hooked soluciones a mi problema, pero no none against or a con nadie a problema similar al mio. Hoy me dio por nuevo buscar y esta vez TR against a con alguien a problema muy parecido, in este foro aqui, asi that me he animado a comentarlo.

  A saludo thanks to photos

  Hello! Gracias por publicar in las Soporte communities of the Apple. Hemos lanzado una nueva Comunidad of Apple support in Spanish. If you interesa participar, registrate, encuentra una respuesta o publica una pregunta sober los productos y servicios of Apple that mas you interesen. Haz click in este enlace para el sitio en Español visit.

• Qosmio F20 with Vista: display is not wake up from sleep/standby

  I hope someone can stop pulling my hair out - please!
  I have a Qosmio f20-136 that I upgraded to 2 GB of RAM. I managed to install Ultimate Visa on what actually works very well. I get a score of 3.4 Visa which means Aero works very well. The lowest score of void is actually the CPU (the 1.6 GHz Pentium M) with following 3D graphics to 3.9 with the Geforce Go 6600.

  However, I have an annoying problem.
  Hibernate works very well - he hibernates and returned very well. I have the power button set for the Hibernate now and also in the start menu power button.
  If I close the lid it goes to sleep and when I opened the lid it picks up perfectly. There is the sound of a device connection / disconnection when I open and close the lid.

  However, here's the problem. I would like to use the power button to sleep rather than hibernation and I don't want to wear and tear on the hinges of the screen by keep opening and closing the lid. So, I tried to set the power button to sleep and also tried selecting sleep in the start menu options. In both cases, the machine goes to sleep but then a problem when I try to resume.

  The powers of the machine upward but the screen is black. Everything is alive, but I don't see anything.
  If I unplug the power cable and plug again (which changes the brightness of the screen), then it comes to life. If I close and re - open the lid, it comes to life. Nothing else he raises.

  Some would say that I'm picky because I'm almost there with vista, but I dearly would solve this issue. Can anyone help please.

  Currently using the video driver 97.52. I installed the added G30 package (without the energy control) that works. FN buttons not working (although the multimedia keys - if anyone has a solution for that I wouldn't be thrilled!.) I tried support button for the G30 but does not work).

  Please help if you can.
  Concerning
  Jules

  Hello

  Try to install Nvidia Driver 156.72

  from there: -.

  http://www.laptopvideo2go.com/forum/index.php?showtopic=15580

  Good luck

• Belkins wireless adapter recognizes not all wifi networks

  I have a Belkins wireless adapter for my pc and try to connect to a wireless network. My adapter recognizes not all wifi networks and I know that there is on the functioning of the House. How can I fix it?

  Laptop?  If you know that there is a wireless network in your home because the other computers are connected to him, the most likely cause is that the wireless adapter is disabled (a physical switch or a combination of keys Fn + Fkey).

  For additional help, please indicate the make and model of your computer (and your wireless adapter, if it is not integrated), as well as the version of Windows you have, including the service pack.

• USB printer (HP Laserjet 1012) is not recognized. Help, please.

  It is urgent, please!

  Hello TximasBala,

  Thank you for your message.  To clarify, when you say that your printer is not recognized, do you mean that when you plug it in via USB it is not or not you can not install the printer?  If the printer does not appear after you have connected to your computer, try another USB port on your computer.  If the driver is the problem, you can click HERE for the latest print driver.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Have computer laptop windows 7 & vista windows windows on a WiFi router but unable to transfer files.

  The two appear on my network, sharing is on, but the simple transfer will not work. Help, please!

  Hello

  (1) what happens when you try to use Windows Easy Transfer? You get an error message?

  (2) are what version of the operating system you using (check for Windows Vista and 7)?

  Windows Easy Transfer can't transfer files from a 64-bit version of Windows to a 32-bit version of Windows. If you transfer to a 64 bit version of Windows Vista to a 32-bit version of Windows 7, you can move your files manually or use backup and restore in Windows Vista.

  Windows Easy Transfer.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

• My computer has always said that my windows vista 2009 is not authentic. What does mean mean

  My computer has always said when I open my windows Vista 2009 is not authentic and also said I should add those. I don't know what to do, can you help me with this kind problem?

  I got a c .d windows 7 but it does not work with my windows vista 2009, and I like windows Vista.Do windos Vista 2010 can run on my computer?

  My computer has always said when I open my windows Vista 2009 is not authentic and also said I should add those. I don't know what to do, can you help me with this kind problem?

  I got a c .d windows 7 but it does not work with my windows vista 2009, and I like windows Vista.Do windos Vista 2010 can run on my computer?

  RE: your Windows Vista is not genuine

  Please take a look at this article/answer given by Keith, the moderator of the forum

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-is-showing-as-not-genuine/cbd43297-0e4d-458C-8487-9168c4cd668d

  There is no such thing as Windows Vista 2009 or 2010 Windows Vista.
  Are you actually referring to Microsoft Office 2009 and 2010?

  In any case...

  1. you should post this question in installation, upgrade, and activate forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install?tab=unanswered

  2. If it will make it easier for you, you can use the forum on French language for your questions

  http://answers.Microsoft.com/fr-FR/Windows/Forum/windows_vista-windows_install?tab=unanswered

• I got the job of Corel Wordperfect Suite 7 on Windows XP. I tried to work with this application on Vista, it does not work.

  I got the job of Corel Wordperfect Suite 7 on Windows XP. I bought another computer, I tried to work with this application on Vista, it does not work.

  I tried not to work with Windows 7. Please can someone help me. I took a few photos for businesscards en other extensions in collaboration with .wpg and .shw.

  ERL
  Rob

  I got the job of Corel Wordperfect Suite 7 on Windows XP. I bought another computer, I tried to work with this application on Vista, it does not work.

  I tried not to work with Windows 7. Please can someone help me. I took a few photos for businesscards en other extensions in collaboration with .wpg and .shw.

  ERL
  Rob

  Keep in mind that WordPerfect 7 is a very old version - eight versions. Usually very old versions of almost any program do not work on newer versions of Windows. I don't know about you, but I suspect that you must upgrade to a newer version of WordPerfect.