HP Slate 6 update failed. Not started. Urgent please.

Similar Questions

• Windows Update does not start

  I am running Vista with SP2. Windows Update worked fine until a couple of days. I think that my laptop stop before it ended. Now, windows update fails to start completely - it just hangs.

  Any help appreciated.

  Restore point:
  

  Try a restore of the system in normal mode.
  If this does not work, try to do a restore of the system in Mode safe

  Try a system restore to select a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  See you soon.

  Mick Murphy - Microsoft partner

• my creative cloud is not getting updated. the update does not start yet. There has been 0% for the last 24 hours now

  my creative cloud is not getting updated. the update does not start yet. It was 0% for the last 24 hours

  Hello

  Please follow the steps below and check it, if it helps:

  1 - click wheel settings in the upper right of the cloud creative app > Preferences > sign out

  2 force quit Adobe all activity monitor processes / end of task for Adobe on the process from the Task Manager (e.g. cc, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  3-

  MAC: Right-click on the icon in the Finder and select the 'Go - To' folder option. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol") ~/Library (It will open the folder of the user's library.)

  Then go to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash

  WINDOWS: C:\Users\\AppData\Local\Adobe\ MAA UPDATER and OOBE times

  4-

  MAC:  Go to the Apple icon > System Preferences > privacy and security > firewall > TURN OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  Go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be in ANY

  WINDOWS: see, turn the firewall on or off - Windows Windows help

  5 make sure there is no other Internet active safety program - if it is then go ahead and launch CC app and login and check

  Let us know if that helps.

  Kind regards

  Bani

• Error message "a program could not start. Please try again"when I try to send Remote Assistance invitation.

  original title: Remote Assistance does not work

  Win XP PRO SP3

  Question #1:

  When you try to send an invitation to support remote I get an error message "a program could not start. Please try again. »

  This error pops up before even the invitation is created, so the problem is with the creation of the invitation and not with problems of subsequent connection between the computers. The invitation is never created. This happens on several computers I own or maintain.

  The event log records all errors when this happens.

  I searched for hours all over the Internet and a lot of people seem to have this problem. Some it is resolved, for the most part, they needed to start a service, but the cause of their problem is not the same as mine.

  After restarting the computer, sometimes the invitation creation works fine.

  Other DIY suggests when the problem appears it can be corrected by running the command 'sessmgr-service' in a command line window. After executing this line it seems that the problem is resolved.

  What I find disconcerting is that Sessmgr.exe is the service Remote Desktop Help Session Manager that was already running, but for some unknown reason runs this line made work again right. I'll have to experiment more.

  Is it possible to debug and fix this?

  Question #2:

  When I can finally send an invitation it will work on the local network but not on the Internet. I can't connect to the Internet.

  I'm looking at the structure and the content of the invitation to http://msdn.microsoft.com/en-us/library/cc240167(v=prot.10).aspx
  In the example given here, as in the generated invitations in my experiences, the invitation contains only the LAN IP addresses (with port number) but no global address.
  RCTICKET =... 192.168.1.65:3389; Jeff: 3389

  How the computer expert is supposed to understand the global address to which it should connect is a mystery to me.

  How can I get Remote Assistance to work on the Internet?

  Hello

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• crashed during the update does not start now

  my computer laptop gateway arrested during an update (not sure which). It does not start, I get a file missing or corrupt ntoskrnl.exe error. My repair disc does not work either, I read in the forum vista repair disks are not recognized if you instaledl a service pack. So if this is the case where should I go from here. I would be most grateful for any help. jpshan

  It seems that the update has affected your daughters to start.

  ·        Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps (you may need an Installation of Vista disc to do that)

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  ·        Bootrec /RebuildBcd

  If this does not work, then withdraws EasyBCD http://neosmart.net/dl.php?id=1 and run this process and see that helps.

  If not, then please repost your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where update problems specialists will be happy to assist with the problems you have encountered. Be sure to include the names and numbers KB ALL updates that have been installed before this problem started.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Since the last update will not start using 3 gb switch.

  From the windows of the last update we cannot start Windows XP (SP3) x 32 using the/3 gb switch. What is happening on three different computers. We need the switch / 3 gb to properly run SolidWorks.

  We have finally "solved" the question of rolling back our video drivers. I'm at home right now so I don't know the exact nVidia video card or driver, as far as I know, it's that they came on ready Solidworks HP workstations. I also know that we had been turn most recent for a year with no problems drivers until this update of Windows one did what he did. Just for fun, I reinstalled the latest driver once and once more the switch / 3 gb stop working.

• CS LR6 of CS LR5 update does not start

  Hi, I have just install CS LR6 by buying the upgrade. Everything seems fine with the process (from download to install), but LR6 does not start when I click on it.

  I've only had this open window: '

  

  Translated, that means, there is a problem with my setup (I don't think while I used LR fair, 5 five minutes ago no problem) and that I should try to uninstall and reinstall... I can't uninstall uninstall link is too broken.

  Any help would be welcome.

  Stone

  OK got it working, but I had to delete all the files Adobe virtually any Mac application, kept only some newspapers (I thought it can't hurt and I'm tired of this mess) and then do a clean installation/configuration in this order:

  -Install the creative cloud with the CreativeCloudInstaller.dmg downloaded from Adobe

  -Disconnect of the CC of the preferences panel and leave CC (after a while of waiting for the "Exit" option to be available on the menu, don't know why).

  -Install Ligthroom 6 LS11 my purchase of upgrade .dmg Installer and download.

  -Launch LR and follow this way to serialized: using Adobe Photoshop Lightroom | Serialize Lightroom trial to activate like Lightroom 6 CC

  Now, I have to install PS CS6 back and all my plugins and settings.

  If you need to do to, be sure to have backups secure (several).

  This solution is really the only one that worked for me, because I think I've tried almost everything I see here (reconnection of the CC, restart, reinstall, delete files, give rights to libraries and so on).

  For the moment, everything is fine (I have no time to seek more internal LR6 bugs) and I got the standalone version works even without connection internet (I tried).

• Bootcamp update fails after El capitan (please help me alone!)

  Hello

  I think I have the same problem postedBootcamp update fails after Yosemite (please help me alone!)

  But like the other user, I'm a little scared, and I don't want to lose my Bootcamp partition.

  That's why I ask you to help for solitaire (thank you much in advance).

  I upgraded my MacBook Pro 13 "(mi-2010) at El Capitan 10.11.5."

  Then I noticed that I could not find Bootcamp.

  Regarding the other question, the score was still there, but now under the name "disk0s4".

  I used Testdisk, following the advice, and I discovered the missing partion and data (I could make a copy)

  Now, I would be sure to make the right steps to retrieve the situation.

  Here is the output of Testdisk

  

  

  The partition does highlight is the right one, here's where I found my data.

  

  Now, what I'm supposed to do is follow the same steps that I read in the old post with 508484288 to step 7 and + 468284272 in step 8, in this way:

  GPT4 to rebuild using start/end offsets

  1. Sudo gdisk/dev/rdisk0
  2. P (print the complete list of parts)
  3. D (delete)
  4. 4 (part 4)
  5. N (new part)
  6. 4 (part 4)
  7. 508484288 (-start offset in the sectors or the starting point for the Bootcamp part)
  8. + 468284272 (-size offset, rather than the end offset)
  9. 0700 (part of Windows type)
  10. P (list of all parties just to see what changes will be)
  11. W (Write the new GPT)
  12. Y (Yes! really write the new GPT)

  And then I need to rebuild the MBR (as the old post)

  1. Sudo gdisk/dev/rdisk0
  2. P (print from parts list)
  3. R (Recover)
  4. O (current MBR hybrid in block letters)
  5. H (chooses hybrid)
  6. Partitioning numbers be hybridized: 2 3 4
  7. Y (good for the GRUB question)
  8. (Indicator boot part 2) N
  9. N (part 3-flag of boot)
  10. Y (boot indicator part 4 make the bootable NTFS partition)
  11. O (current MBR hybrid in block letters)
  12. W (Write new MBR)
  13. Y (yes! write the new MBR)
  14. Reset

  I'm sure I'm in the right direction, but...

  Many thanks for any help

  Excellent work. The two sets of Gdisk steps are correct. If you are on El Capitan, these two sets of measures Gdisk will fail because of the Protection of the integrity of system being activated. Please disable SIP.

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

• (Vista) computer does not start properly (Please HELP)

  My guarded vista stop without known reason. He started up the main login screen and I could connect. After that so long it would just turn off. I did a system restore, system repair at startup and F8 pressed and is entered in safe mode. Now, I have a new problem. He worked for a few hours. Enough to do a bit of homework. Then suddenly it disconnects and begins to do the updates for windows. Then it goes to a black screen and tells me what he planned for a clean disk. So he goes through this process and restarts. Now it is impossible to get pass Part 3 of 3 updates and it just stays at 0%. He will remain on this page for about a minute and just keeps restarting itself. I tried F8 again and cannot get into safe mode. WHAT IS WRONG WITH MY COMPUTER HELP ME! (PS: now I use my laptop which is a XP!) Help, please!

  Hello

  Follow the troubleshooting methods in this article to resolve the problem:

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• iMovie does not start! Please help me...

  Hello

  iMovie 10 does not start when I run the application it!

  iMovie start for a few seconds, trying to backup previous library and then crash...

  Please help me because I don't want to lose all my projects!

  Thank you for the support.

  Cheers to the Italy.

  Here's the message log:

  25/07/16 20:38:19, iMovie 957 [4230]: warning: the selector Gestalt gestaltSystemVersion returns 10.9.6 instead of 10.11.6. This isn't a bug in Gestalt - it is a documented restriction. The NSProcessInfo operatingSystemVersion property to get the correct version number of system.

  Location of the call:

  25/07/16 20:38:19, iMovie 958 [4230]: 0 0x00007fff938d76df ___Gestalt_SystemVersion_block_invoke + 113 CarbonCore

  25/07/16 20:38:19, iMovie 958 [4230]: 1 libdispatch.dylib 0x00007fff892a140b _dispatch_client_callout + 8

  25/07/16 20:38:19, iMovie 958 [4230]: 2 libdispatch.dylib 0x00007fff892a1303 dispatch_once_f + 67

  25/07/16 20:38:19, iMovie 958 [4230]: 3 0x00007fff93863fbc _Gestalt_SystemVersion + 987 CarbonCore

  25/07/16 20:38:19, iMovie 958 [4230]: 4 CarbonCore 0x00007fff938637d0 Gestalt + 139

  25/07/16 20:38:19, iMovie 958 [4230]: AVCHD 5 0x000000012ca6402d _ZN13FDVDProcessor12FCDVDManagerC2Ev + 141

  25/07/16 20:38:19, iMovie 958 [4230]: AVCHD 6 0x000000012ca69ab7 _ZN13FDVDProcessor12FCDVDManager13GetDVDManagerEhhPFvvE + 87

  25/07/16 20:38:36, iMovie 015 [4230]: ERROR: could not allocate class object (null) - return nil (file: /Library/Caches/com.apple.xbs/Sources/DeepSkyLite/DeepSkyLite-28072.7.78/Framew ork/DSBridge.mm, line: 7612)

  25/07/16 20:38:36, 078 diagnosticd [127]: error assessment process info - pid: 4230, puniqueid: 4230

  25/07/16 20:38:36, 080 InternalFiltersXPC [4231]: host connection < NSXPCConnection: 0x7f85b350f2a0 > invalidated connection from pid 4230

  25/07/16 20:38:36, com.apple.xpc.launchd [1 114]: (com.apple.iMovieApp.64352 [4230]) Service was released due to the signal: Abort trap: 6

  25/07/16 20:38:36, com.apple.xpc.launchd [1 143]: (com.apple.ReportCrash [4236]) endpoint has been activated through legacy launch (3) API. Please go to XPC or bootstrap_check_in(): com.apple.ReportCrash

  25/07/16 20:38:38, ReportCrash 831 [4236]: report of incidents recorded for iMovie [4230] version 10.1.2 (283259) to Users/iMaclittlegiop/Library/Logs/DiagnosticReports/iMovie_2016-07-25-203838_i Mac-Littlegiop - Home.crash

  25/07/16 20:38:38, 889 ReportCrash [4236]: AutoSubmitPreference is 0

  25/07/16 20:38:39, UserNotificationCenter 012 [4238]: * ATTENTION: the method in the class userSpaceScaleFactor NSWindow is discouraged on 10.7 and later versions. It should not be used in new applications. Use convertRectToBacking: instead.

  Launch iMovie by holding down the option key and see if you can create a new library. If Yes, then add clips to the timeline and see if iMovie works ok.

• Satellite P10 554 will not start! Please help ASAP!

  Hello, please someone help as soon as possible.

  I got it for a few years now. A keyboard replaced Germnan to English.

  Used it three days ago and was very good. It shows no signs of something not ussual.

  This mornign however, I pressed the "power" button and not started. I tried to connect the battery, no indicator light came.

  I'm lost-don't know what to do.

  Please help someone?

  Thanks in advance

  Hello Morta

  If the unit is connected to the power supply and if there is no response after pressing power button must be some hardware malfunction. Press the power button and hold down for a few seconds. I put t know how old is your device but it is possible that the warranty is still valid. Please contact the customer Service of your country partner and let check the device. The warranty will cover the costs.

• Win XP pro. SP3. Update does not start.

  I got my newly installed Win XP PRO SP3.
  And when i lunch win update it's not running i tray wait but after a couple of hours i give up and shut down pc.
  If someone now what to do please help, need it for work.
  

  I got my newly installed Win XP PRO SP3.
  And when i lunch win update it's not running i tray wait but after a couple of hours i give up and shut down pc.
  If someone now what to do please help, need it for work.
  

  Hello

  Follow these steps.

  Go to Start, run, copy and paste this command, then click OK: services.msc
  (Press the Windows key + R if you do not "run" in the start menu)

  In the list of Services, see Background Intelligent Transfer Service or BITS ?

  If it is not listed, please follow these steps if you have a desktop computer. If you have a laptop, go to section 2

  Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

  Research should show this file in the following locations:

  C:\Windows\System32
  C:\WINDOWS\ServicePackFiles\i386
  C:\WINDOWS\system32\bits

  I hope they are all present, follow these steps to register the service.

  Go to Start, run , and copy/paste: regsvr32 qmgr.dll and click OK

  Do the same with this file: regsvr32 qmgrprxy.dll

  Restart the PC and then copy / paste this command into the field run:
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  If you are prompted to insert the Windows installation CD, ignore this and in the dialog below, replace the path C:\WINDOWS\ServicePackFiles\i386

  The reason to change the path to the i386 folder is that the files that are there are newer than those on the Windows installation CD.

  Restart the PC and then go to the Services and you should be able to see BITS in the list.

  Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then do the following.

  Go to this link and install the IE8 December Update:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404

  If you use IE7, use this link instead:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442

  Finally, go to the Windows Update site and you should be able to download normally.

  ==========================
  ARTICLE 2 FOR LAPTOPS ONLY
  ==========================
  If qmgr.dll is only present in C:\WINDOWS\system32, follow these steps.

  Open the system32 folder, locate qmgr.dll, then right-click and choose copy.

  Stay in the system32 folder and right-click anywhere and click on New, then folder. Rename the new folder into pieces (in lowercase).

  Open the folder of bits that you just created, right-click in the right pane and choose Paste. You should see the qmgr.dll file in there.

  Close Windows Explorer and then go to Start, run , and copy/paste: regsvr32 qmgr.dll and click OK

  Do the same with this file: regsvr32 qmgrprxy.dll

  Reboot the system and then copy / paste this command into the field run:
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  If you are prompted to insert the Windows installation CD, ignore this and in the lower dialog box, change the path to C:\WINDOWS\system32

  Restart the PC and then go to the Services and you should be able to see BITS in the list.

  Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then do the following.

  Go to this link and install the IE8 December Update:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404

  If you use IE7, use this link instead:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442

  Finally, go to the Windows Update site and you should be able to download normally.

• Satellite 2800-400 Bios Update - will not start

  Hello
  I hope someone here can help me.
  I just did an update of the bios on a S2800-400. The machine worked perfectly up to this point, has never had a problem at all. (should have been better I guess)
  Anyway, he is been 192 MB of ram and a 60 GB drive upgrade and works happily in this config for some time. The change I wanted was the ASPA compliance, but for some reason, the machine pours just as soon as he's trying to start now. The update of the bios has been according to the instructions and successful that the messages show. Do not know what to do now... Where can I find the old bios files? return to orig
  Thanks in advance

  Hello

  As far as I know old BIOS version can be installed just in Service partner. Another possibility is to try to reinstall the OS from restore CD. Maybe using.

• XP Home Edition crashed after installation of updates, will not start in any mode, help!

  Compaq Presario V2000

  After you install the updates, H.E. XP crashed.

  Try to start in safe mode accused the MUPS. SYS line

  press F8 to disable automatic reboot

  Restart in any mode result in the horror of horrors the Blue Screen of Death with the following error codes:

  STOP: 0x0000007E (0x805BA6EC, 0xF79372B8, 0 x 80000003, 0xF7936FB4) and any other information about the error

  RAN on PhoenixBIOS diagnostic test; all tests passed

  Can not get into windows to run restore. Any advice? Have a Compaq I don't have the OS or restore disk (did not come with it). I do try to find a copy of XP itself?

  Thanks for any thoughts!

  Go to the http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/8a2928b5-9fdf-4c40-8afc-edde6b808b79/ wire

• After the first 2015.3 update will not start

  It's pretty weird. Adobe Upadater shows me that he updated for first 2015.3. When I look for the program folder, the folder name is 2015.3 as well. When I run the application, the start screen displays 2015.4. Then the splash screen disappears and nothing happens.

  Does anyone know how to solve the problem of not first start?

  Disconnect from the cloud,

  Restart the computer,

  Sign in,

  Try again

  see how it goes.