Vista-Help Page fail to load

Whenever I try to access my computer as well as information on the performance and management of network and sharing Center says page failed to load. Help, please.

Advertisement

Hello

Those who are closely related to EI so please do these:

What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

Close IE and restart IE

Looking for unusual Addons, BHO and other:

IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.php

Startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

Also get Malwarebytes - free - use as scanner only.

http://www.Malwarebytes.org/

--------------------------------

Try these to erase corruption and missing/damaged file system repair or replacement.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Update for Windows Vista "Page Failed to Load"

    I have Windows Vista Ultimate on an Acer Ferrari 5000, running an AMD Turion 64 x 2. I believe that I have service pack 2. Windows Update tells me I need to update, but whenever I have pull up, whether in my task bar, start menu or the Windows update page, it says "page failed to load". What should I do?

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Update page fails to load

    After that my updates of September, my update page now shows just to the white top with a message in the middle that says page does not load.  Still, Windows Update automatically and download of updates, but I have to stop inorder to install.

    I used the fix it tool link here in the forums and have downloaded and reinstalled the last updated using the links here in the forums too.

    However, when I use the Windows Update menu start or get them all of the control panel is a blank page in the window with the message in the middle that the page does not load.

    I have sent an email with the same question but thought that post in the forum too.

    Also, I use Vista Ultimate.

    There is no error created by trying to open the link, just a blank white page with "Page to not load"

    Hi, I tried the above, and my windows update always said "page failed to load". are there other methods to solve this problem, or another way to update my windows vista? Thank you

    Update: windows blinds was the problem and needed to be updated. He has somehow conflicts causing the error "unable to load the page. for those of you who do not have blinds on windows, check your other programs made by the same company (stardock) and update those. hope this helps those out there that have this same problem.

  • my systems page will not open error message "the page failed to load".

    Original title: my systems page does not open after going into the control panel and then system and maintenance

    my systems page opens not after going under maintenance then system and Control Panel. This shows simply "the page failed to load". I need to access this page to share files from one computer to the other. can anyone help?

    Hi Sarah Brown,.

    (1) remember you to make changes prior to this problem?

    (2) what is the complete error message you receive?

    Method 1: Run the fixit available in the link below and check if that makes a difference

    Difficulty of broken desktop shortcuts and common system maintenance tasks

    Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.


    Method 2:
    if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

  • I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".

    I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".

    I tried to take different paths, as via the Control Panel, but it's the same thing.

    Operating system?

    Try the following: -.

    Open search Vista Start Menu Bar and type: RUN

    Click OK

    Type the following lines, and after each one, click OK: -.

    regsvr32 jscript

    regsvr32 vbscript

    regsvr32 /i mshtml

    No guarantee

    TaurArian [MVP] 2005-2010 - Update Services

  • Widows Update page fails to load

    When I click on Windows update, I have THE PAGE failed to LOAD. How can I solve this problem?

    You cannot update a Vista computer via "windows update page."

  • Error, "Page failed to Load", while customizing the control panel.

    Hello

    I recently inherited a second hand dell tower which has Windows 7.

    Everything seems to have set up ok but when I go into control panel customization, I get the message "Page failed to Load".

    After having sniffed around, it seems that the Control Panel does not use a program that the computer recognizes.

    I went through various forums for the answer, but nothing helped.

    Any suggestions?

    Hello

    Thank you for the update. It is unfortunate to know that you still experience this issue.

    As you are facing the issue in the safe mode, as well as in the new user account, it seems that there is corruption of system files that cannot be replaced by the new file system. But, you can also try to check your hard disk for errors of the last step. Read the following article.

    Check your hard drive to find errors in Windows 7

    http://support.Microsoft.com/kb/2641432/en-us

    Warning: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Please, try the steps above and update with the State.

    Thanks again for we keep posted!

  • When I click to open windows update I see on the screen (the page failed to load)

    When I click to open windows update I see on the screen (the page failed to load)

    I'm trying the two just doesn't work

  • Windows Update - PAGE FAILING TO LOAD

    While trying to update windows I get "Failed to load the Page" message, what happens for a few months, this message is this little matter how I try to access updates

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • "Review updates" Vista sp2 page does not load.

    My computer has windows Vista Home Premium sp2 32 x and updates are checked for every day. There are 2 updates important and 2 Optional updates listed at this time. When I try to "review updates" category either important or optional page does not load. It is a problem for several months now. I wonder what are these updates and why I am not able to view them. I am the administrator and the only user of this computer. It's not part of a corporation, company or home network...

    Hello

    I suggest that you follow these steps and check if the problem persists.

    Step 1:

    I would temporarily disable all security software and check if the problem persists.

     

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
     
    Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Step 2:

    Test the issue in a clean boot State.

    Note: Follow step 7 to your computer as usual.

  • Center network and sharing Center shows "Page failed to load".

    On Windows Vista, Network and Sharing Center comes with a blank page except for text in the middle and says 'The Page impossible to load' steps, I tried:

    Clean boot

    SFC/scannow

    CHKDSK /r

    System Restore (has not only once other succeeded, but does not solve the problem)

    None of them have worked. I have reviewed the SFC newspaper and looked at DLL files, it says could not be fixed and replaced those with well known copies.

    A clean install is not a good option in this case either. My thoughts are that it is a corrupt DLL somewhere or a DLL that has incorrect permissions.

    On another note, I can't connect to wireless networks either. To be more exact, no networks appear in the list (I can connect by typing the SSID manually. The pop-up icon wireless in the status bar indicates "networks are available", but the list shows no. I believe that these two issues are related. Please give suggestions and connents, I appreciate all help.

    Thank you.

    Hello
     
    Do you remember any change to your computer before the problem?
     
    Search for related errors and Event Viewer .

    I suggest that you follow these steps and check if the problem persists.

    Step 1:

    You can uninstall the drivers for the network adapters in the Device Manager and reinstall the same.

    To uninstall the wireless device manager,

    1. click on Start , type Device Manager in the start search box and press ENTER.

    2 locate the network adapters and expand the same.

    3. Select the adapter, right click and selectUninstall.

    4 restart the computer, if prompted.

    Pilots should settle automatically after the computer restarts.

    Note: Before uninstalling the drivers from Device Manager, make sure that you have a backup installation files.

    Step 2:

    A. If not help, to create a new user account and check if the problem persists.

    B. Si the problem is resolved in a new user profile, then probably you had a corrupted profile and can be remedied .

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Facebook and Mozilla Help pages won't load properly, but Youtube and other pages load correctly

    When I want to log on to Facebook, the page does not load correctly. Facebook and the Mozilla help page have this problem. YouTube, for example, is quite ok. I deleted cookies and caches, I uninstalled the browser, I refresh it, but none of the solutions worked. Help, please.

    Hi, in case, you're an avast user, please try to disable https scanning in avast:

    1. Open the Avast dashboard on an affected system.
    2. Select settings in the left side menu.
    3. Adopt a Protection Active.
    4. Click on customize next to the Web Shield.
    5. Uncheck the option "Enable HTTPS analysis", and then click ok.

    http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

  • This Page Failed To Load on Metro all the app in windows - like weather - 8 bing Ie...

    I installed Windows 8

    It worked well but after the installation of proxifire I have problem

    By default the Windows 8 App that shown on the start menu such as the weather, sports, news, that is to say, Bing ETC gives the error "This Page to not load"

    But the bureau and with Ie I can use internet successfully and also works good Proxis,.

    I uninstalled the proxifire to make sure that this problem was not because of that, but I still have the problem

    I just lost the metro app

    I need help to solve this prolem
    because windows 8 app is really amazing and I've lost the ability to use

    Best regards
    BanditIR

    helps the im having the same problem, that it worked ok so I guess that only a refresh or microsoft will have to do an update to this...

    I'm on key 3G huawei so maybe that is the issue, but it's never happened before.

    No need to update.
    Just uninstall the software of Huawei. Turn it back on.
    Then re-install the software of Huawei. All metro apps should now work.
  • Network and sharing - "the page failed to load".

    The network does not funtion on my new laptop computer. When I try to open the network and sharing, it gives me a white page that says "the page Impossible to load. It worked fine when I had last week. If I look at the devices it is said they work normally.

    Colombia-British

    Hello, spearbc

    Please use the Forum for answers!

    Have you installed a software between yesterday and today?

    To clarify, you get this error in the centre network and sharing, correct? (Image)

    You can try to run the System File Checker and let us know the results, analyze the system-protected files and replace the incorrect versions with correct versions of the files Microsoft.

    Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    Type the following command and press ENTER: sfc/scannow

    We can't wait to hear back on your part.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Vista said the «failed to load the user profile» user login

    I looked on the site to see if others have had this problem and that they have. To resolve this problem said to press F8 at boot and choose Safe mode. I tried this and once I press f8 all that happens is kette - drive 0 see a failure. I have no idea what this means and nobody had this problem here before, so how can I fix this so I don't have to take my computer to a best buy and pay for repair

    Hello

    See the following message if necessary, and then return to it if the problem is still present.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

    Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
    known to cause this problem.

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
    Profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
    This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
    two with the same password) use to test or difficulty of the other.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
    not that an Admin account that is not used except for testing and difficulty).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for


HashFlare