Vista Home 64 Bit - impossible to reinstall HP F340

Similar Questions

• I use windows vista home 32 bit OEM prerium now I wan to upgade to windows 7

  I use windows vista home 32 bit OEM prerium now I wan to upgade to windows 7
  can I know how to update?

  halloah,
  Your previous was not clear.  If you buy an upgrade to Windows 7, you will get a product key so that it can be activated.  If you do not have a key, you will need to contact the company you bought Windows 7 from. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• OfficeJet 4500 - files disappear after scanning to the desktop Gateway computer using Vista Home 32 bit

  I have an Officejet 4500 g510n. My OS is vista home 32-bit on a Gateway desktop computer. I installed the full installation software. Files disappear after scanning using the HP Solution Center. I am able to print. There is a USB connection.

  I tried to download the "critical update" on this topic on the HP site but the link takes me to a complete installation I installed without success. Where can I find this update 'critical '.

  Try this link for the critical update:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&cc=us&DLC=en&lang=en&LC=en&OS=4063&product=3752459&softwareitem=OJ-81532-2

• KB2508272, 2117917, 2505189, & 2562937 any error with 8007371B in a clean boot (Vista Home 64 bit)

  KB2508272, 2117917, 2505189, & 2562937 any error with 8007371B in a clean boot (Vista Home 64 bit)

  I even do the Reset to update and run each update above one at a time.

  Results of the SFC

  2011-09-29 17:52:21, info CSI 00000006 [SR] components check 20 (0 x 0000000000000014)
  2011-09-29 17:52:21, transaction Info CSI 00000007 [SR] beginning verify and repair
  2011-09-29 17:52:22, info CSI 00000009 [SR] verification complete
  2011-09-29 17:52:22, CSI of information 0000000 [SR] repair 0 components
  2011-09-29 17:52:22, CSI Info 0000000b transaction [SR] beginning verify and repair
  2011-09-29 17:52:22, CSI to 0000000 d [SR] repair information complete

  Hi Ed - Bob,

  When you have used the system update readiness tool that makes the journal file state? If there are errors, you can use this article to resolve the problem. http://TechNet.Microsoft.com/en-us/library/ee619779 (WS.10) .aspx

• Can I install lightroom 5 on Windows vista home 32 bits andhow many computers can I install it on? I'm afraid that if my computer rejects lightroom I will get a second chance.

  Can I install lightroom 5 on Windows vista home 32 bits andhow many computers can I install it on? I'm afraid that if my computer rejects lightroom I will get a second chance.

  Bunkieboy,

  Lightroom 4 and later will not install or run on the 32-bit editions and 64-bit of Windows XP Edition family or professional

  Lightroom 5 et seq. will not install or run on 32-bit editions of Windows 7, Windows 8, 8.1 for Windows and Mac OS 10.6.x

  Lightroom CC will not install or run on Mac OS 10.7.x

  Please see system requirements for Lightroom for more information.

  You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it one at a time. Lightroom is the exception because it is a cross-platform product, so it can be installed on the pc and mac platforms.

  Guinot

• Where and how can I download Windows Vista Home Premium purchased online to reinstall it with my own genuine key?

  I buy Windows Vista Home Premium and cannot access my Digital Locker service to re-download the files to reinstall.  Help, please!

  Hello

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• My laptop is windows vista basic 32-bit, can't reinstall the CD drive

  Original title: reinstall the cd drive

  Hi, my laptop is windows vista basic 32-bit, I had a problem where I had to reinstall the cd, I installed the operating system, but can't seem to reinstall the drive.when reinstall the cd drive witch no have topress f2 or f12 thank you, wendy

  Hello

  1. what happens when you try to install the CD player?

  2. you receive an error message?

  3. you try to install an external CD/DVD drive?

  4. you try to install the driver for the DVD drive, or the drive itself?

  See the article mentioned below:
  Installing new hardware: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-new-hardware-recommended-links

• How can I repair, installation/uninstallation of vista home 64-bit Windows

  How can I fix Windows 'of installation/uninstallation? I get a 'contact admin' whenever I tried to UNINSTALL a program. Help, please!

  Use: Windows Vista Home Premium 64-bit

  Download and install: Windows Installer 4.5 (. Windows6 0-KB942288-v2-x 64.msu)

• Upgrade Vista Home, 32-bit

  I am currently on Windows Vista, 32-bit Edition. I have problems to increases.

  Can I upgrade Windows 7 or 8?  and if so will lose program data and files saved on my current computer?... have a lot of photos, saved emails, financial program (Quicken), etc.

  Is it better to try the upgrade... or grit their teeth and replace the PC?

  Bob

  Hello

  Microsoft is no longer selling Windows 7.

  You can upgrade to 7, but 8.1 is a clean install.

  Windows 10 came out at the end of this month and 64-bit, is that computers in popular way will these days

  If it was me I would replace it as the material probably should be upgraded for the use of later operating systems taking into account the age of a computer with Vista.

  But here's a guide for the upgrade.

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  _______________________________

  Do the following before upgrade you to Windows 8.1.

  Check if the manufacturer of your computer/laptop has Windows 8 drivers available for your model.

  If this is not available, Windows 8/8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  :

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  See you soon.

• HP Pavilion a1767c Vista Home 32 bit - BIOS update failed

  The unexpected happened by updating my BIOS, we lost the power.  Once the power came back, my machine was bricked.  I get the error of Checksum BIOS's Boot Blocker

  I did some research and found that I could re-Flash my BIOS so I could boot to a CD or a floppy disk.  I don't have a floppy drive, and after many attempts, I learned how to create a bootable CD with PHLASH16 and the extracted from the update of the BIOS ROM file that I had downloaded from the HP support site for my computer (sp37378.exe).  The question is the program flash will not read the ROM file that I've extracted from your exe file and I can't find the original file for the BIOS on the HP website.

  Am I right in thinking I can reflash my BIOS?

  Can you help me to loacate the worm/Date BIOS:

  Phoenix Technologies, 5.08, 12/08/2006?

  Thank you for your time and help,

  Ken

  From another thread, I started looking for a copy of the Bios file, I found my answer.  I tried to use the tool of phoenix bios when I should have used the bios awards tool.  You can search for "BIOS for Pavilion a1767c Vista 32 bit" for the full net.  Here is the comment that has saved my pc.

  Thank you all for your time and your help.

  Please try the file downloaded from the following link... some details are also provided in the readme files:

  https://SkyDrive.live.com/redir?RESID=1FFCCA6FE63FD77! 214 & authkey =! AOYevSziujFH8oQ

  I am an employee of HP.

  Kind regards
  Vidya

• Problems installing updates windows Vista home 32-bit updates

  Hi, I have several times been impossible to install updates windows update tells me that I need for my computer.
  I have changed the settings from automatic to manual and vice versa and download updates, but are not installed.
  I am never given the opportunity to accept the license agreement.
  Some updates have not been installed.
  8007010B error code
  code 643
  I can't know what code 643 is.
  This has happened for months.
  Can what's up, anyone help?

  Thank you

  Hi zsaire,

  Let us know the updates that need to be download.

  First go through all the steps and then start troubleshooting.

  Step 1: Check if Windows update-related services are set to automatic and started.

  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update

  Step 2: Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output

  3 remove all tmp*.cat to the following folder:

  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  Step 3: Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

  2. at the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note: Click OK if prompted.

  Restart the computer.

  Step 4: Empty the software distribution folder

  1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. in the Services (Local) pane, click Automatic updates and then click on stop.
  3. reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

  Note: by default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
  6. in the Services (Local) pane, click Automatic updates, and then click Start.
  7 restart the computer, and then run Windows Update again.

  Article number: http://support.microsoft.com/default.aspx/kb/822798

  Step 5: Disable the security software

  Step 6: Scan Run SFC
  Please follow the steps below to the auditor of the filesystem as the first steps:

  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.

  ================================================================================

  If there are Microsoft .NET Framework listed updates to be installed, follow the steps mentioned in the article:
  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• Drive hard error detected on the HP Pavilion dv6835nr with Vista Home Premium bits

  Lately, my laptop has been slow to start. Yesterday, after control electronic, I noticed the screen turned black and only 3 icons were visible: Trash, Firefox and File Recovery... And a lot of small cascade titled windows: System message. and a file recovery window appears and scans to find out the necessary repairs. The message is "your computer is in critical condition. Hard drive detected error. "7 questions of repair, the next screen offers to upgrade my 'demo' (don't have the slightest idea what they're talking of)

  When I click here to activate it, they want to buy such a product.

  Is this a scam or a virus? How can I fix this problem.

  HP Pavilion dv6835nr

  Processor Intel Core 2 duo T5550

  with 250 GB HDD

  3072 MB DDR2 SDRAM

  Please help me...

  Hello:

  Yes, you should try it but do not for get rid of the virus. The drive is bad, but you can try to recover the files you want to keep using this disc.

  The GUI will allow you to explore your hard drive and if there's still life in it, you may still be able to see and copy your files to a storage device portable usb.

  If the Kaspersky Rescue CD cannot access your hard disk, then all is lost.

  Things to consider... dv9000 models are plagued by questions of the motherboard and you can opt for a new PC, rather than fixing you.

  I do not work for HP, so I don't have to think that you buy a new laptop, but you have to consider the possibility of throwing good money after bad.

  If you decide to buy a new hard drive, you can get a 7 200 RPM one which has better performance on a disk of 5 400 rpm, but it shorten the time between charges of battery a bit.

  You will also need to buy a set of recovery disks.  Info to do this is on the link below:

  http://support.HP.com/us-en/document/bph07143

  If you can still read the Vista product key 25 character on the bottom of your laptop, you can also make your own Vista installation DVD.

  Here's how:

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• Windows Vista Home Basic Edition has been reinstalled and I would like to uninstall it

  I would like to uninstall windows vista. We have now old windows with all our files on it and windows with nothing on it. I would uninstall the last installation and simply go back to the old. It's on a lenovo. It's my friends computer.

  Hi, Cheryl l.,

  Your system must have a Windows CD.  Insert the CD and restart your system.  When the press and the button to start the CD-ROM appears, press on and keys.  Install a new copy of Windows.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Ultimate 32-bit, impossible to download security updates

  I'm unable to download the updates of full security for Windows Vista Edition.  I have experienced the same problem last year, and now he's back.  I get error code A 80071, 30, but there is no code in the list to tell me what this code means.  This is the exact code that was back last year when my security updates failed.  So I do not know how to proceed.   The last time I met this problem, that it took 2 hours of phone with a technician to repair.  No, I see that I can not contact a technician.  Can someone help me?

  Here is some additional information:

  I already have components of update of Windows that did not help the rest.

  Browser: IE 9.0.4

  Security: McAfee

  The updates that fail to download are:

  KB2647516, KB2633874, KB2654428, KB2660465, KB905866

  Hi MaryMcGovern,

  You did changes to the computer before the broadcast took place?

  Method 1
  I suggest you try the steps from the following link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2
  I suggest to perform cleanup starts, then download and install the updates from the Microsoft Download Center.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2647516)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28831

  Security Update for Microsoft .NET Framework 2.0 Service Pack 2 on Windows Vista Service Pack 2 and Windows Server 2008 Service
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28861

  Update security for Windows Vista (KB2654428)
  http://www.Microsoft.com/download/en/details.aspx?ID=28871

  Update security for Windows Vista (KB2660465)
  http://www.Microsoft.com/download/en/details.aspx?ID=28916

  Update for Windows Mail Junk e-mail filter [February 2012] (KB905866)
  http://www.Microsoft.com/download/en/details.aspx?ID=1207

• I can't install a webdisk on vista home 32-bit top of the system. I allowed the site through the firewall with ports 2077 and 2078.

  I have a website www.rsdworld.com. I tried to establish a webdisk or connecton on the network's website. I get an error asking that I ensure ports are allowed through the firewall or the folder cannot be created. This becomes agrivating. I had no problem installing a webdisk on my XP.

  Hello canmandom,

  You will need to check with Webdisk to see if it is compatible with Windows Vista.
  Check the system requirements.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think