Drive hard error detected on the HP Pavilion dv6835nr with Vista Home Premium bits

Similar Questions

• Satellite L350 - cannot get the keyboard to work with Vista Home Premium

  I just reinstalled Vista Home Premium 32 bit but can not get the keyboard works. I tried to connect an external keyboard with the same results. I checked the disk manager that says that the driver is working OK I wonder if it could be a problem of system or a hardware problem.

  Any help would be welcome

  Jim

  Try the external USB keyboard.
  If it works correctly, then the internal keyboard works bad and must be replaced.

• Cannot restore a Pavilion from HP with Vista Home Premium a1520e

  Try to restore an HP Pavilion a1520e with Vista Home Premium using the recovery disks that came with it. Cooldown increased to 99%, then stops with a message "Error 002" ridiculous. Tried the 2nd HDD, reset the BIOS, 2nd set of disks, H/p unable to fix without sending any box and pay more than it is worth. I have all receipts and simply want a legitimate o/s that I can restore.

  Hello

  The problem is not with Windows, it's a hardware error OR you do not have the right Vista HP OEM
  installation media.

  1. check that the disks you have are correct for this model of CV. HP can sell you cheap the
  installation media real cheap since you already own windows.

  2. Remove ALL power and reinstall all the memory cards and cables (at both ends, where this is possible)-in fact
  delete and replace - do not just tight. Clean the dust bunnies and make sure that the vents are clear.

  By chance the need to re - install caused by malware?

  Hope this helps and happy holidays.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• 64 bit sytem with vista home premium which has been randomly locking up and freezing. The error is event 6008.

  I have an ACER aspire x 3200 64 bit sytem with vista home premium which has been randomly locking up and freezing. The only mistakes were event 6008 with a description of the stop system prior to (time) on (date) was not planned.
  When these errors originally occurred, I returned the system to acer and they installed a new hard drive. After updating the vista system blockages continue 30 times over a period of 3 months. Acer sent me a new disk image on 3 disks that I have installed and updated on 11 October. There is no blocking until the 10/27, 10/28, and for the 3rd time today.
  The closed unexpected gives a blue screen if I use the locking system to the top. I have to hold the power to restart when the system crashes.
  Can someone help me solve this problem?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  But I guess it's too late for this for so long that there are probably no so old restore points.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer on the stop (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.  From what I understand, there is none of the events (which surprises me because a freeze should certainly generate an error event).

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work (but you NEED a disc).  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• How can I get windows vista? I get a message that PC is not supported by the recovery disks. Windows vista Home premium HP pavilion dv9310us

  How can I get windows vista? I get a message that PC is not supported by the recovery disks.  Windows vista Home premium HP pavilion dv9310us

  Hello

  This recovery software is part of the process of HP.

  Contact HP support

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• can someone tell me how to disable the guest account. I do not have the password and the administrator. my pc is vista Home premium

  can someone tell me how to disable the guest account. I do not have the password and the administrator. my pc is vista Home premium

  Hello

  Enable or disable the guest account the
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-the-guest-account-on-or-off

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I uninstalled MSE and installed norton, now I can't access the web. any help? Vista Home premium

  I just uninstalled MSE and installed Norton. Now I can't access the internet. I have vista Home premium. my internet works on all the other PCs in the House. the computer shows I have internet acess, but tells me that I can't Conect on the web. I used restore to an earlier date without change. What can I do?

  Well, I just thought about it. I started in safe mode and uninstalled Norton and safety package provided with Norton from Comcast. It was the solution. I don't know if it was Norton, safety package, or both, but I'm back to MSE and perfect performance. I hope this can help someone else. Thank you

• Is it possible to update the version of paint which comes with vista home premium to the version of paint that comes with Windows 7?

  Greeting cards

  Hello

  Is it possible to update the version of paint which comes with vista home premium to the version of paint that comes with Windows 7?

  Hi, the paint that comes with Windows Vista is designed by default design. See the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint

  It will be useful.

• Cannot change the hosts file in Windows Vista Home Premium

  Posted on behalf of a client:

  Cannot change the hosts file in Windows Vista Home Premium. Read-only value.

  Help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to take possession of the host file and check to see if the same problem happens.

  To apply permissions to a file or a folder:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article mentioned below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Prevent changes to a file or folder (read-only):

  http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only

  Hope this information is useful.

• Dell XPS 420 with Vista Home Premium, replaced the hard drive, download now blue screen errors

  My girlfriend has a desktop Dell XPS 420 quit working a year or 2 ago. A computer technician told me that it sounded as if the hard drive was bad, recently I purchased from Dell, a Seagate 1 TB hard drive (the original is a Western Digital 320 GB).

  I bought also, once again from Dell, a copy of its installation discs for Windows Vista Home Premium 32 bit.

  I installed the new hard drive, correctly, as far as I can tell, but I tried several times over the past days to install Vista and a few times I got errors (BSoD) STOP and a few other times, Windows Installer errors.

  What's wrong?

  I run Dell diagnostics that took almost a whole day, but I don't think anything. I have not partitioned the hard drive, it's like 931 GB.

  I think that may be something related to the RAM, but I'm not sure.

  Thanks for any help.

  Hello

  Here is the information on the Dell Diagnostics:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  And Dell has provided information on how to reinstall Vsta using their recovery disks.

  "Manually reinstall your Windows Vista operating system"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  For more information, try the Dell Support Forums.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• My E drive stopped reading CD/DVD. I have a desktop compaq with Vista Home Premium w / all service packs downloaded. My E drive doesn't recognize any disc in the drive.

  How can I get my E drive working again?  I inadvertently stopped a backup file and ejected from the disc without it completed stopped.  Now, he does not recognize the disc.  Please help me.  Computer: Compaq (Desktop), Windows Vista Home Premium, Service Packs 1 and 2.

  Hello

  Check with the support of Compaq, their online documentation and drivers and their forums for
  known issues.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to download printer driver Canon Pixma MP240 on a disk with Vista Home Premium installed on the old PC with XP Home not connected to the internet, THE WAY EASY, PLEASE

  I have an old PC running Windows XP Home on the internet, has lost the MP240 printer driver. You want to download the drivers for it on my Vista Home Premium to install in the old PC. I can't get the internet to work with the old PC, or I want to download the drivers directly here. I found a few options for pilots with the Vista computer, but they all want allows you to download the diagnostic and I won't be using this printer on my Vista computer, so I don't want to do it this way. Any place that I can just download the DRIVER ONLY and put it on a disk to load in the old PC. Help, please

  I think you'll find a driver here: http://software.canon-europe.com/products/0010645.asp

  English version: http://software.canon-europe.com/software/0035873.asp?model=

• Check the disk with Vista Home Premium

  I'm doing a disk check on my C drive with windows Vista, Home Premium, ed. I get to the point where it asks if I want to plan the audit to the next time I start the machine. But when I check that, close and restart, nothing seems to happen that my normal startup. Why is it not showing me that a disk check is happening or why it's starting the disk check? Thank you.

  Have you tested the hard drive itself with the maufacturer of hard disk diagnostic utilities?

  `~`

  The current time and the date now in Oregon, United States

  15:33
  Sunday, July 7, 2013
  The time Pacific daylight time (PDT)-0700 UTC
   
  UTC/GMT is 22:33 Sunday, July 7, 2013
              
  Current weather conditions in Portland

  Cloudy67 ° F / 19 ° C

• Can I use Microsoft Windows 7 Home Premium Upgrade Family Pack (3 users) to install Windows 7 Edition home premium 64 on a desktop computer running the OEM version of Windows Vista Home Premium 32?

  My desktop system is an Acer E700 Intel Quad Core 2.4 GHz with 4 GB of RAM and 1 Gig video running Vista Home Premium OEM 32 version. I plan to upgrade the hard disk of 1 tetrabyte before upgrading the OS.  If so, how should I do this?  I have to restore the backup to disk to the new disk before update for Window 7 64?

  My second office is already running Vista Home Premium 64 so this upgrade using the family must be right before correct?  Or do I need to backup to the subject programs before moving to Win7 64?

  Thanks in advance.

  You will need to do a reformat to perform installation and you reinstall the applications.  There has never been a way to upgrade from x 86 to x 64.  You will need to do is use your x 64 media to install Windows 7 on new hard drive, use your product key on the certificate of authenticity located on the side of the Acer desktop computer.  You will always be the OEM license terms, as you install the same Windows SKU.  Product keys are interchangeable between x 86 and x 64, but you will probably need to call to activate Windows after installation - usually the Internet activation does not work on current versions of Windows using the seller great modes of action.

• KB2296011 causes the blank screen in Windows Vista Home Premium?

  I'm troubleshooting an issue with an installation of Windows Vista Home Premium on a laptop. After Tuesday October 12 updates, the laptop goes to a blue screen after authentication with any account. There is a mobile cursor mouse, but nothing else. C/a. gives the menu, but "Start Task Manager" has no effect, restart will only work.

  I am able to login normally mode without failure. Remove the update KB2296011 removes the problem, I narrowed down it to only this update. It is now necessary to restart and use system restore to go back before this particular update to access Windows.

  I did the following to troubleshoot:

  (1) I tried to install the system update tool, which had no effect.

  (2) I tried to install the KB2296011 update manually after downloading, the problem returns after installing.

  (3) I tried to install the KB2296011 update manually mode without failure by another post here, but this is not possible, which gives the following error: "Windows Update Standalone Installer: Installer encountered an error: 0x8007043c.»  This service cannot be started in Mode safe. »

  It seems up to present have no way to obtain this update to install without the origin of the white screen issue. Please advice, thank you.

  OK, it looks like at this will be my last post.

  This technician seems to address the issue much differently from the rest. After the things we have done in my previous post, he seems convinced that the problem occurs when this security update is installed, it thinks it's UAC which is damaged, and possibly other files. If its resolution suggested the problem is to run a repair on Vista installation, in order to repair potentially damaged or corrupted files. This would correspond well with hijackware theory posted earlier, too.

  It seems door by another symptom not reported to me or noticed until now. With or without UAC enabled, standard users cannot connect. It passes the connection, in the preparation of your office for a disconnection. Administrative users can connect very well. As the primary user of the machine is an administrator (of course!), this was not noticed until I created a Standard user to test and found this problem.

  I hope than a repair installation (or even better, an upgrade, as I prefer to simply wipe the HD and start over) will solve the problem. The machine has 2 GB of RAM and a 2 GHz dual core chip, so I think it can handle very well (my wife does mobile) Win7.

  I hope that all of this novel, we have written here will help others as well.