Vista home PR., after that "sleep" mode, the computer wakes up not (dell inspiron 530)
Dell inspiron 530 vista PR. House, after the "sleep mode" the computer doesn't wake up. The mouse works fine. (the computer is set to wake you up at a mouse click) When I click the mouse fan goes up like to spend awake mode, but fan and the power light continues to blink. I press the power button once and stop the computer, then the computer says recovery and gets stuck again. Then I turn it off again and it completely restarts and the power led will stop blinking and I'm back in business. -arg... Help! Thank you.
Hello
You did changes to the computer before the show?
Please follow the steps below.
Method 1:
Follow the steps mentioned in the links below.
The problems of wake the computer from sleep mode
http://support.Microsoft.com/kb/266283
A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode
http://support.Microsoft.com/kb/930091
Method 2:
Refer to the section "Why doesn't my computer go to standby or hibernate as expected, or why he wake up suddenly?" the link mentioned below.
http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
Tags: Windows
Similar Questions
-
I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is anyway to recover this password or what is the next step to use the computer again?
Hello WillieBouma1,
You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!
"And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)
-
Original title: 'make sure that your Internet protocol bindings are Correct (DELL Inspiron 530 Intel 82562V and Desltop)
I'm doing tech support for the family and I'm stumped. They had a Dell 530 with an Intel 82562V-2 and is no longer connected to the internet.ipconfig/all statements
Hostname...: wayne-PC
Suffix main DNS...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.That's all. Windows gives errors two errors:
(1) the card network knows of driver or hardware problems
(2) check that your Internet Protocol connections are Correct
I installed the latest Intel drivers and TCP IP settings are checked for V4 and V6. I even went as far to install a new Dynex Ethernet card that gets the same mistakes.
I even tried the netsh reset ip and netsh winsock reset command. I have no idea what to do next. I searched glasses and found similar problems with the same model of Dell and card, but they have been fixed by rebooting.
Hi MButIer,
-How long have you had this problem?
-Was any change in software because the computer before the show?Follow the steps mentioned below:
Step 1:
Temporarily disable the antivirus software (and any other security software) and the firewall on the computer as a test. Once disabled check if you can connect to the internet without any error.
If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.
Note: Make sure that you enable the antivirus software, other security and firewall programs.
Warning
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 2:
Perform a System Restore to a point before the show and check if this solves the problem.
See also:
System Restore: frequently asked questions
If the steps above do not help, the best would be to get in touch with the Internet Service Provider (ISP) for assistance.
Hope this information helps.
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
When I leave the "sleep mode", the computer comes alive, but do not display.
I have to turn off the computer and then go back to get a picture. The necessary restart is very annoying. As happens every time. I use Windows 7.
Moved from Feedback Forum to performance and Maintenance Forum
Hi, Twollip,
See more-
A Windows Vista-based computer stops responding when you resume the computer after hibernation
http://support.Microsoft.com/kb/928135/en-us
You may experience problems with power management on a computer that is running Windows Vista
http://support.Microsoft.com/kb/927393/en-us
Bios updates
-
I can't find the message unread despite having opened all my messages in the Inbox and wonder why new messages no longer bolded.
Right click on the folder, select Properties, and then on the button repair. A new clue can delete it.
If not try
View menu > folders > see not read if Thunderbird can find because he says he's here after an index rebuild. -
I intend to recover windows vista on my HP Pavilion DV4 - 1400. For some reason any my current vista said that it isn't legal (it's that came with the computer) I have not changed the operating system. My key of vista down my computer is damaged. If I perform my vista recovery provided with the recovery drive, this will solve the problem? The recovery process will be asking for a cd key, because as I said above that on my laptop is damaged.
Hello
with HP, you press F11 on startup to start the recovery process
and it shouldn't have an entry of your share product key
for any other questions about the process of recovering HP contact HP because it's their recovery process not microsofts
Contact HP
http://welcome.HP.com/country/us/en/contact_us.html
HP support forums
-
my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?
It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works nowand I need my computer quite urgent for the University.Thank you very much!Hello
No saving necessary data and re-installing Windows Vista might be the best option, but here
are a few others.You can save your files by putting the drive in another computer as a 2nd disk (best) or external
Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
Of course a real store of the computer or the manufacturer of your system can help to recover the files.Or you can use a boot Ubuntu CD to back up data.
Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer--------------------------------------------------------------
You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.First check this thread in case it is simple and if not to come back to this thread.
Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.Here's a video of one of them.
http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.phpYou have a Vista disk? You can try restoring the system to it. If you don't have the disks your
system manufacturer will sell them at low prices. Or try in safe mode if you can get there.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can create a recovery disc or use someone even version (making the system restore it)
must be bootable).How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html------------------------------------------------
These require the correct Vista discs since you can not start safe mode.
Try the Startup Repair tool-
This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html-----------------------------------------------
Here are a few Google searches where many have found different solutions:
Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQIVista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI-----------------------------------------------
If necessary and you can access all ordinary Windows.
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
(if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.You can use another DVD that aren't copy protected but you you need to own
Product key.On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html---------------------------------------------------------------------------
Another method that works sometimes: at the command prompt, type of Vista startup disk:
(a line type or copy and paste one line at a time and hit enter - enter a bracket)
or "BOLD")c:
cd\
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)
RESTART Windows
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Fallout 3 stops working after the computer wakes from sleep
Since the games for Windows Live 3 is out, Fallout 3 has never been the same. He used to work at best my GfWL and now her nightmare. Recently, after that I quit the game and put my computer to sleep, Fallout 3 will stop working completely after wake up. I try to start it and I get them all is a cursor with a small blue rotating light. What is even more strange, is that my computer goes into a State of semi who no longer meet this point where programs and keyboard shortcuts no longer work, but I can browse my hard drive. I try control + SHIFT + ESC to see what the devil but that causes Windows Explorer to stop working. CTRL + Alt + Delete does not work either. No matter what I try, once I start Fallout 3 after the computer wakes from sleep, I can't do the task to the top manager and I can't use my computer. The only way to get it is to hit the reset button or turn off manually. Can someone please help to get rid of this problem?
Hi murphy449,
1. did you of recent changes on the computer?
2. the problem only happens when you start fallout 3 after the sleep mode?
3. are you able to wake the computer quits successfully sleep mode?
4. What is the version of Windows installed on the computer?
Method 1
I suggest that you manually download and install the latest drivers for display on the computer card and check if it works.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Updated a hardware driver that is not working properly
Method 2
If the previous step fails then I suggest that you try the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
If the previous step fails then I suggest you check the observer after return with details and events for the cause.
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?
I think you're looking in the root folder not your home folder. Tilde ~ in front of the first slash indicates the folder.
Try this...
Quit Safari.
Open a Finder window. In the Finder menu bar, click go > go to folder
Type or copy paste the following text:
~/Library/preferences/com. Apple.Safari.plist
Click OK, and then move the com.apple.Safari.plist file to the trash.
Restart Safari to test.
-
I can not connect on windows vista home basic desktop pc because of the former owner
I can't log on to Windows vista home basic desktop pc because of the password previous owners is unknown
Hello
Try the following.
Using another PC, download the app from the following link and save it in your downloads folder.
Once the download is complete, open your download folder and double-click on the installer - this will result in another file, which is the disk image (.) ISO) you need to burn to a blank CD.
Now, you will need to use an app like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.
When the disk has been created, shut down the PC you can not log on, press the ESC key as soon as you press the power button to access the Start Menu, insert the CD, select Boot Options (usually f9), use the arrow keys to select the CD/DVD drive and press enter - peut also have you to "Press any key" to boot from the CD if asked to.
Follow the instructions on the guide here to remove the current password.
Kind regards
DP - K
-
Windows wants to install pack 3 KB2494113 SQL server on my pc vista Home premium and maintains failling, shows the FF code. I did still fails it reinstall any response. Thank you
Hello
Were you able to install some other updates?
I suggest you perform the clean boot and install it manually.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Try to download and install the update manually
-
I can't click Next after that I accept the terms of use on programs during installation
I can't click Next after that I accept the terms of use on programs like photoshop or solid works? Help, please
Hi Elano,
Thanks for joining us out on Microsoft Community Forums.
According to the description provided, its looks like you is faced with a problem during the installation of programs.
It would be great if you can answer these questions to help you further.
1. is the issue limited only during the installation of any program in particular?
2 have you made changes on the computer before this problem?
I suggest you to check if the program is compatible with Windows 7.
Windows 7 Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
If it is not compatible with Windows 7, then try to run the program in compatibility mode.
Make older programs in this version of Windows: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows
I suggest to perform a clean boot, and then try to install programs.
Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.
How to solve problems using the clean boot in Windows 7:
http://support.Microsoft.com/kb/929135
Note: Once the diagnosis has been made, make sure that you try to step 3 of the article to reset the computer as usual
We would be more than happy to help you if the steps above did not solve the problem.
-
Hi all
Please help solve my problem.
After that I changed the Duplex parameter on NIC's Service console, I am unable to connect the ESX host. How can I reset the 100 MB NETWORK card duplex. Can someone help me please.
Concerning
Vijay
Hello
As the bulb you have two problems that are not related.
(1) duplex setting, your switch and NIC must match. If one is assigned to auto-negotiation, then the other must be set to auto-negotiation. Personally, I tend to let auto-negotiation unless there is an absolute reason to spend. If you then turn on the both sides of the interface, the switch port and esxcfg-NICS allows you to change the duplex, etc.
(2) passwords for root are not related to the network unless you have also run esxcfg-auth authentication remote. The only time I saw what you have here is when the system is configured to try to authenticate remote and not locally.
The two problems are fixable by booting into single-user mode, set the duplex and reset the password.
Best regards
Edward L. Haletky
VMware communities user moderator
====
Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast -
After that I changed the apple ID password I can not connect to facetime
After that I changed the apple ID password, I can not connect to facetime
Update your password for Facetime, too.
-
After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password
And this is not recognitze by any device, computer or iPhone 6plus.
If you or the original owner did not have the password no one here or at Apple can help you.
Maybe you are looking for
-
Hello I try to install the printer 'Color LaserJet MFP M277 dw Pro'.By inserting the disc into the phase "installation preparation" is 96% and then stops and gives me the error.I use Windows XP SP3. It is always installed, but physically disconnected
-
Original title: eee pc ausa I have an eee pc with xp I want to format it, but im used to ms back how I do
-
Preparation of desktop + default user login
Occasionally, when I start my laptop Windows 7 Ultimate, instead of the 'Welcome' screen and a login prompt for the user by default ('B'), I get "Readiness Office", then the login for the user by default ('B') prompt. After a successful login, I get
-
Is it possible that I can make my message from the contact form go to my mobile phone via sms
I still use SMS as my main medium to communicate with everyone, whether family or friends or for your business.I have one enquires section of my site and I would like to know whether or not I csn have forwarded or sent to my phone via sms messages.Th
-
I upgraded my Plan of photography in the show Plan of clouds but apps like tests.
I've done a few chat sessions with Support Adobe technique with the same result ever after that that they have accessed remotely in my computer. All other applications read like essays except Photoshop and Lightroom. I pay $50 a month, so I should h