Vista Media Center and my Xbox 360 extender connection

Hi I have a problem connecting my xbox 360 and my windows vista media center. Everytime I try I get the message saying that it can't find the range extender and suggests that it is one of the following three things

(1) the Extender is turned on and connected to the network

It's on and it appears as an icon of the xbox 360 in my network on the vista machine and can connect to the internet, so I guess the network very well.

(2) that the code is correct

It's that I checked it about 30 or twice now.

(3) UPnP does not work properly

I guess that's the problem but cannot figure out how to solve. I have a BT Homehub router. I've implemented through active UPnp. I even tried to disable the firewall completely on it and on vista, it made no difference to the port forwarding doesn't seem to be the answer.

Help please it is one of the main reasons I got an xbox 360 and vista

Paul.

Paul Bradbury,

There are always a few things that do not exist to try, so we can solve your problem. Below you will find a link on your specific issue. There are about four troubleshooting methods that you can try. Please let us know if it worked for you, and if so what method has solved your problem.

http://support.Microsoft.com/default.aspx/KB/932159

Let us know if you additional questions or concerns.

Carlos
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Windows Media Center on the xbox 360 extender Feezes

    Hello

    I have recently updated from windows vista to windows 7 and now can't use my xbox as an Extender as it freezes when opening on my xbox.

    I looked through many forums that suggest that it freezes before the opening, for example to connect to the computer, my problem happens after it connects.

    I turned off my firewall and now only have the windows firewall, which apparently must allow the connection.

    The only other difference is that I bought 2 powerline adapters both capable of speeds of 200 Mbps, so I don't see why they should cause problems.

    Any help would be appreciated. My computer knowledge is not really great, but will try all of the suggestions.

    Hi Mattlucas1976,

    You can also check the firewall and security settings. Sometimes they interfere in the connections. Try to disable them temporarily and check if you are able to connect to wireless internet. Later do reactivate and try to change the settings for the same thing.

    Understanding Windows Firewall settings

    http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    If this does not resolve the problem, you can try to clear the cache on the Xbox Console and check if that helps. Follow the link given below to clear the cache.

    How to clear the cache of the Xbox 360 console system

    http://support.Microsoft.com/kb/971755

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I can't configure windows media center in my xbox 360 s. My pc is not as visible in the console while my desktop is visible.

    original title: don't Set Up Extender

    PC: HP Pavilion dv7

    OS: Windows 7 Home Premium

    Console: Xbox 360 s

    Router: Linksys WRT160Nv3

    I can't configure windows media center in my xbox 360 s. My pc is not as visible in the console while my desktop is visible. I tried all the suggestions available in the internet on the topic. Still, I can not connect my PC and Xbox 360. Windows Security Essentials and spy doctor PC Tools are installed in my PC.

    Found the problem, at least for me anyway.  I had to disable my internet connection shared on my Windows 7 computer.  Once I disabled internet sharing it worked like a charm.

  • When you use Windows Media Center on the Xbox 360 DVD have not given chapter.

    After finally finding many questions I have my Xbox Media Extender and running upward and only this question left.

    I'm ripping my DVD to single file .vob she seems to like and plays very well, but it is only with the file movie and nothing else in the record.  How the XBOX sees it, the bed and he plays very well.  However I have no control outside the break and if I restart it takes over the job.

    Now if I rip my DVD with the .bup .ifo files in this folder the XBOX instantly he shoots in the list of the DVD and it will not play.

    When I use Windows Media Center on my PC it preforms even when the film is in the folder.  Then when I add bup and ifo data I can still play, but he has all data in the chapter that I need.  Shows all the chapters, allows me to jump as I please.

    How can I get my XBOX to behave like my PC?  I have to remove these 4 files in/out of the folder to see pop in and out of my list of XBOX.  How can I get the XBOX to validate data, so my movies actually have chapters and ignore the controls?

    Thank you

    Chris

    Hello, wilsman00

    As mentioned, by changing the VOB files, the data in the chapter are probably damaged. This can be confirmed by putting in a retail DVD in the drive and play directly from the DVD.

  • The streaming of Media Center PC on Xbox 360 problems after recent updates

    I've been streaming video of my Media Center PC on my Xbox 360 for about a month now.  I've never had problems until I installed the new update today.  Now I can listen to just a show for about 5 minutes then my PC freezes.  My configuration is:

    • Windows 7 (64-bit)
    • NVIDIA GTX295 1 GB video card
    • 8 GB of DDR2 memory

    If there is no additional info that could help please let me know.

    Thank you

    Robert

    Hello
     
     

    1. remember you number updates that you have installed?

    Method 1.
    Use the homegroup troubleshooter.
    a. Please open Control Panel and click on troubleshooting.
    b. click on "Network and Internet", then select the homegroup.
    c. troubleshooting tool find the cause and fix the problem? If this isn't the case, please move on next steps.
     
    Method 2.
    Check the following relevant services.
    a. click "Start", type "services.msc" (without the quotes) in the search bar and press ENTER.
    Note: If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
    b. right click on the "Peer Networking Identity Manager" service and click Properties.
    c. Please click the Stop button to stop the service temporarily.
    d. access to the following folder:
    C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking
    e. delete all files and folders inside.
    f. start the following service gain: Peer Networking Identity Manager
     
    Method 3.
    You can disable the anti-virus software and check if that causes this behavior.
    Temporarily disable the security software installed on the computer and check if the problem persists.
    Disable the anti-virus software
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
    Method 4.
    If the steps above do not better work that you can do is to perform a restore system just before the point where the problem occurred.
    I have listed a few articles that explain the system restore in Windows 7.
    System Restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
     
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How can I get my movies on the media center via the xbox extender

    I DON'T KNOW HOW TO PUT MY MOVIES IN MEDIA CENTER. HOW CAN I LOOK AT THEM THROUGH MY XBOX EXTENDER

    I DON'T KNOW HOW TO PUT MY MOVIES IN MEDIA CENTER. HOW CAN I LOOK AT THEM THROUGH MY XBOX EXTENDER

    ==================================
    Perhaps the following goods range offers something useful:

    Windows Vista-
    Connect your computer to a TV
    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

    Windows Vista-
    HDTV: Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

    Windows Vista-
    From PC to TV, part 1
    Digital media stream to any room with Windows Media Center and Xbox 360
    http://Windows.Microsoft.com/en-us/Windows-Vista/from-PC-to-TV-part-1-stream-digital-media-to-any-room-with-Windows-Media-Center-and-an-Xbox-360

    From PC to TV, part 2
    Stream home movies to any room with Windows Media Player and an Xbox 360
    http://Windows.Microsoft.com/en-us/Windows-Vista/from-PC-to-TV-part-2-stream-home-movies-to-any-room-with-Windows-Media-Player-and-an-Xbox-360

    FAQ: Using Xbox 360 as an Extender
    http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Extenders/help/Extenders-Xbox-FAQ.aspx

    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Vista Media Center loses tv recording titles

    I just opened my Vista Media Center and - despite my existing TV accessible and playable records - most of them have lost their title information and description of the program. Only program time and the recording time is displayed.

    I checked the "raw" files on my hard drive and they are all ok.

    Any ideas how to retrieve the details?

    I just opened my Vista Media Center and - despite my existing TV accessible and playable records - most of them have lost their title information and description of the program. Only program time and the recording time is displayed.

    I checked the "raw" files on my hard drive and they are all ok.

    Any ideas how to retrieve the details?

    Try a system restore.
    Select any restore point when everything was fine.

  • Xbox 360 and Vista Media center (understand not found)

    I've looked everywhere I can think and have not been able to find an answer to this far (including the green button forums)

    After you run the transfer Assistant to move things to the Media Center and use as a desktop pc, the xbox 360 and Media Center cannot find the other and settings, I can see the xbox inside network but devices Media Center doesn't see it and I get the infamout (extender not found error).

    configuration is a wired connection via a belkin router, network configuration has not changed and the media center has been able to connect to the xbox previously, I tried several things so far

    -uninstalled onecarelive and disabled the firewall (one of the problems solved but are still unable to find the xbox)
    -reset the xbox to factory settings
    -check the firewall router so
    -installed all the updates that are known for pc and xbox including SP2

    Here's the event codes that I get when you try to configure the Extender, it shows correctly configured but yet I get the error not found "extender".

    * Information 2009-06-04 13:54:55 Mcx2Dvcs 400 none
    Windows Media Center Extender Setup successfully configured Windows Media Center PC for use with an Extender.*Information 2009-06-04 13:54:51 501 Mcx2Prov None
    Hersch began setup of Windows Media Center Extender with the following options: Firewall (0,0,1,1) Power management (0) media settings (1) * WARNING 2009-06-04 13:54:37 411 Mcx2Dvcs None
    Windows Media Center Extender Setup detected the following non-Windows Firewall: Windows Live OneCare Firewall

    disregard, I just fixed it... stopped the connection internet sharing service and was able to connect.

    for those who need to do this click on the Start button > right click on computer > click on manage the > on the left side of the window that opens click on services and applications > then select services > find the service "internet connection sharing" > right-click and select stop.

    some positions will tell to go to properties on the network connections page, but there was a tab sharing for mine

  • Xbox 360 Media streaming from Vista Media Center, required codec on XBOX but not other extensors?

    I am trying to use my Media Center on my Xbox - but I am unable to get the videos to play, other than the native codecs from Microsoft.

    Now, if I connect to Media Center on the Xbox and go through the video dashboard they play all since I have sharing enabled on WMP11. But it is not useful.

    Media Center may be forced to work with the Xbox 360?

    iSlack,

    Here is the link that Mark has attempted to provide and you might not get in. It is a very useful site, please take the time to look at him.

    http://www.Microsoft.com/Windows/products/winfamily/mediacenter/extenderfaq.mspx

    What distinguishes this site was as follows:

    Can what types of content stored on my Windows Vista-based PC I access through my Xbox 360

    Video formats

    • MPEG-1 with audio MPEG

    • MPEG-2 with MPEG audio or AC - 3 audio

    • WMV, 7, 8 and 9 with audio WMA Standard or WMA Pro

    • WMV Image 1 and 2 (Photo Story 1, 2 and 3)

    Audio formats

    • Windows Media Audio (WMA) Standard

    • WMA Pro

    • WMA Lossless

    • MP3

    Please let us know if you have more questions or if you are still having the same problems.

    Thank you.

    Carlos
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to stop the indexing of media files in Windows Media Center Xbox 360 extender?

    I have successfully set up the Xbox 360 Windows Media Center and attaches it to a machine Windows 7 Ultimate 32 bit on the same LAN segment.  It works fine, except that he rebuilt his index from scratch, apparently file whenever it is launched on the Xbox.  Specifically, if the Xbox is turned off and then turned back on, and WMC on that is launched, the files in the folder of the Windows 7 machine media library are indexed again).  This makes WMC on Xbox almost unusable, because it forces you to wait a long time for the UI to become sensitive, whenever it is launched after turning on the Xbox.

    This doesn't seem to be a network problem, as I've reconfigured it all the senses (wired and wireless), network setting tool reports always excellent results, and once the index file is rebuilt files media play very well.

    I tried to reduce the number of files in the files of 'library' of the media on the Windows 7 machine and were reduced to a single folder in which the files do not change (that is, the files are added, deleted or changed between Xbox WMC launches).

    This behavior is normal?  Is it possible to change it?  I can't find the settings on the Xbox that control it.

    The local network segment is on the Internet, and the Windows 7 machine had all updates applied from the time of this post.  The Xbox is the new Xbox 360 4 gig, with more than 2 GB of free space on the internal memory and another 8 GB of free space on MU.

    ---------------

  • How to take pictures of windows media center and put them on your xbox to use as background really stuck

    hey im trying to get pictures of the internet ive saved on my laptop on my xbox for new backgrounds I have done before with a usb key, but it doesn't seem to work now. Ive connected my xbox 360 to my windows media center and I can't seem to find how to save the image on my xbox I could really use some help ive been tempting centuries now and his frustraing really thanks ():

    Hi Josie,

     

    Thanks to join Microsoft Community where you will find all the required information on the Windows operating systems!

     

    You want to add an image to the background of the Xbox.

    You can refer to the section set an image as the background of Xbox 360 Dashboard site:

    http://support.Microsoft.com/kb/909161

    You could get more support on the support site:

    http://forums.Xbox.com/xbox_forums/b/default.aspx

    For any question related to Windows, feel free to contact us.

  • Connection between Windows media center and Xbox is lost when you try to watch movies

    I start watching movies via the windows media center and after a few minutes it turns off and it says that the connection between my pc and the xbox has been lost, I have previously watched movies like this with no problems and have not changed the settings of any sort help it would be appreciated

    Hi samperry,

    What is you receive the exact error message?

    Method 1: You can follow the steps mentioned in the article below
    What happens if the connection to the Windows Media Center computer is lost?

    Method 2:  You can see the steps outlined in the article below, which deals with a similar question

    Error: Session Terminated (when connecting a console Xbox 360 to a computer running Windows Media Center)
    http://support.Microsoft.com/kb/911123

  • Windows vista media center does not I can uninstall and reinstall?

    Windows vista Media Center has been installed, but will not respond. How can I fix this problem?

    Hello

    You cannot uninstall or reinstall

    Try this:

    Run the sfc/scannow command.

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

    How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

    http://support.Microsoft.com/kb/928228#appliesTo

    If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

    read the below tutorial on how to perform a repair installation

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  • Windows Media Center and Windows media player 11 will not work on my Gateway (Vista) computer

    On my windows media player, I get the following comment after I try to read the dvd:
    Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card.

    On my media center to windows, I get the following comment:
    The dvd can be used by other players, need to change resolution b/c it is too high.

    But Tuesday, I played the DVD without problem and now, I am confused and I need help to understand what is happening.

    Hello texanbelle,

    Thank you for using the Microsoft answers Forum.

    I am including instructions below a scan to help repair the system files related to some components of Windows, including Windows Media Center, and Windows Media Player.

    Repair Windows Vista Media Center files

    You can use the following steps to repair files that are part of Windows Vista Media Center:

    1. click on the Start menu, choose all programs, then Accessories, then right-click on the item to the command prompt and select run as administrator

    2. click on continue to allow it to open a prompt with administrator privileges

    3. run this command in the cmd prompt: sfc/scannow

    4. the cmd prompt should list text stating "start system analysis. This process will take time. »

    5. wait for the scan to complete (this may take several minutes, so be patient).  This command will scan all protected system files and attempt to replace the incorrect versions by appropriate Microsoft versions

    6. once the analysis is complete, the SFC tool will indicate whether or not it found no problems and whether or not he was able to correct

    7. If any errors are reported that SFC could not resolve, there are steps in this knowledge base article which explain how to locate and attempt to correct errors

    8. after fixing errors that are found, try to use Windows Vista Media Center again.

    Fix Windows Vista Media Center registry entries

    Unfortunately, there is no easy way to fix key/registry values that are installed by Windows Vista, as there are files.  If you want to try to repair the registry values/keys that are part of Windows Vista Media Center, you will need to re-run the installer of Windows Vista operating system and repair the operating system.

    Try this and tell us if it helps with your question.

    Judd
    Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Can I reformat a computer with vista media center edition on it and thenperform a new installation of xp? I don't like vista?

    Can I reformat a computer with vista media center edition on it and then perform a new installation of xp? I don't like vista and want to go back to xp.

    Hello

    If you have an XP disk and license, you can go back to XP

    but make sure that the manufacturer of your computer has XP drivers available for this model computer

    If you have not an XP license try to buy one at a computer repair shop

    you boot from the XP disc and format in this way:

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    How to perform a clean Installation of Windows XP - Part 1 of 4

    http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

Maybe you are looking for

  • How to download pass Simple HP 2012

    Model: HP Pavilion dv3500 No. FW721EA #ABU Operating system: Windows7 Ultimate 64 bit I downloaded UPEK Protector Suite, but I can't use my fingerprint reader. It is said was unable to open. I think that HP simple pass is the right software/driver fo

  • Pavilion 15-eo17AU: a disk read error occurred press ctrl + alt + delete to restart

  • LabVIEW run time version

    My CVI application must have the engine LabVIEW to run installed to run so I would check a program is installed at the start of the program. Now, the question isn't just "How can I get the version of the runtime LV?", as differently from CVI there ma

  • BlackBerry Z10 Native E-Mail BlackBerry 10

    Hello I am a current OS 7.1 Torch 9860 user. I think the upgrade to BB10 in the coming months. At least with blackberries inherited, we can't use native email without a data plan. Considering that the BB10 devices don't use bis (BlackBerry Internet S

  • General questions about Cluster 4400 WLC

    I have inherited some 4402 wireless LAN controllers and I am in charge of making their ship-shape. So I have a few general knowledge wireless, I have not worked with before wireless controllers and have a few issues with that I was wondering if someo