Vista not work no-potential confilict with a program called TRAKTOR PRO?

Similar Questions

• Why the sound does not work in Windows 10 with BootCamp installed on MacBook Pro mid 2012

  So, I recently had a mistake huge hard drive, then I formatted the drive and installed Windows 10 I downloaded the BootCamp 5.1.5621 software (which is the version for this computer) and my audio didn't work. I've used Windows 8.1 in the past without Activation, but that was a few months ago. I've deleted it 2 days after I put it on the computer, but all drivers well worked out there. Although I plug in a USB headset and audio installed and worked fine! Help, please! I even reinstalled BootCamp!

  I have the same Macbook Pro 2012 with boot camp and dual boot Windows-10 and Sierra.

  Everything works fine. I think you have the wrong boot camp files.

  I think that you need version 6. Reconnect to OS X and run the boot camp assistant and try to download new files from boot camp.

• Windows Vista product key will not work. I checked with Microsoft and they said, that it is used.

  My activation key # does not work. It came with a disk and key * removed product key *. I just checked, and Microsoft said it has been used. Could you send me a key # likely to work or simply to activate my vISTA HOME PREMIUM 32

  original title: Activation key #.

  It's probably normal - it IS used by your previous installation

  You use telephone activation

  telephone activation.
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

  You can also post a full report of MGADiag here, and we can advice a little more precisely what may be the problem...
  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please
  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• Greetings Workshop does not work on my laptop with Windows Vista

  Greetings Workshop does not work on my computer acer laptop with windows vista. says that it cannot read a part of the program. How can I make it work?

  * original title - wishes workshop does not work on my laptop with windows vistaIdeas: insert an error code or give a brief description of what you are trying to accomplish or fix.__*

  Greetings Workshop does not work on my computer acer laptop with windows vista. says that it cannot read a part of the program. How can I make it work?

  Hey monkeymanknitting

  1st thing is to see if it is compatible with vista

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  If it's trying to do a right-click on the setup.exe then run as administrator

  If this is not vista compatible read below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Walter, the time zone traveller

• AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

  AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

  Try these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > general > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your computer or mobile device.

  If you're still having problems, try to use 802.11n for wifi if you currently use 802. 11B or 802. 11 g.

  If your problem is AirPlaying starting a computer, try turning off bluetooth

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• I did a clean habit with a program called BleachBit and others, but in Safe Mode, in order to get more deleted

  I did a clean habit with a program called BleachBit and others, but in Safe Mode, in order to get more deleted. That sure worked before, but now I find that I can not find Freecell or disk cleanup, anywhere on my XP computer. I have SP3, but I don't have the CD from Microsoft. I tried all the answers suggested with no luck. I got an another disk cleanup, which will probably do, but my main concern is the Freecell, it doesn't seem to be any where on the net more. Can you help me please?

  Hello

  I would sugget you follow these steps and see if it helps:

  Method 1:
  Do the product of the steps in this link and check if this may help:
  http://support.Microsoft.com/kb/307768

  Method 2:
  Try the running System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

• Paved touchscreen and button right does not work on Satellite L300 with Vista

  My right button does not work.
  By clicking on the icon on the desktop, the drop down menu does not open and when you work in some programs (Indesign).
  In addition, sometimes the touchpad does not work.

  Reset is useful for a little bit.
  I have install the driver of Synatpics 11.2.4.0.
  Is there something else I can do besides sending it to be repaired.

  I just got this laptop 3 weeks ago and I hate Vista.

  Hello

  I put t think this could be a hardware problem.
  First of all, you should try to update the driver for the touchpad.

  First remove the touchpad driver in the system.
  Then, visit the page of European driver of Toshiba and download the latest touchpad driver and install it.

  PS: If you use an external mouse and that you have installed the mouse drivers/tools then this could also affect the functionality of the touchpad.

  Please also check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38792

  Welcome them

• Windows Vista not working anymore... need help!

  My Windows Vista simply stopped working. I have a Windows recovery disc and a Kapersky rescue disc. After having used both drives that will not repair the Windows Vista, boot into safe or anything else. All I get is a blank black screen with mouse control. Toshiba A205 came with an OS disk. I made a recovery disk, but it does not work... any help with me to enter online would be appreciated... thnaks

  Download the log of the last step, copy it to the USB view or something.

  Clean start

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.
   
  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.
  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help.

  Use safe mode with Networking if you need internet access.

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Go to the Startup tab, and then click Start secure (also check network if necessary). Reset. Come back here and uncheck the box secure start to return to normal mode.

   

  or

   

  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support]

   

  Startup Repair

  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

  In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

  Select the Startup Repair tool.

  Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

  To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

  Select command prompt.

  Type

  type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

  .

• Repair disk Vista not working does not and cannot correct the disk error

  Hello. I have a disc error and my vista repair disc does not work and I do not know why.

  I tried "repair disk" in the start menu F12 and it will not work.

  Does anyone know an alternative solution for fixing windows disk repair?

  Anyone know why they would stop work?

  I too, have a mysterious GLOW RED on my screen and do not know if this is related to repair disk does not?

  It is originally the screen system 'black '.  My main screen simply vanishes in the dark and I have to restart the computer and go through everything new; checked the Direct X (up to date) and running hard drive Diagnostics, but the diagnosis breaks down due to the error of hard disk (disk repair-related?)  What is the 'RED' light on my screen?

  Thank you!!! for any input or advice!

  
  

  Hi Nansye,

  Until solve us the problem we need more information about the problem you are experiencing.

  • What is the exact error message you receive on repair disk?
  • Since when are you facing this problem?
  • You did changes to the computer before this problem started?
  • Are you able to boot to the desktop?
  • You have a Windows Vista installation DVD?

  In the monitor that you receive the red glow due to various reasons like failure to display drivers, hardware problem or if there is any what interference of electronic gadgets.

  I suggest you update to download display drivers the latest drivers on computer manufacturers site and check if it helps to solve the problem of the red light on the screen.

  You can access the link below and follow the steps to update the drivers to display on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Make sure that you do not have other electronic items kept around the screen and try to keep few away from the computer.

  If the update of the pilots is not enough, you can contact the computer manufacturer to check if there are problems with the material of the monitor and if it needs to be replaced.

  You can also run the memory diagnostic tool on your computer and check if it helps. Access the link below and follow the steps to run the tool from WinRE Windows Memory Diagnostic.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem 

  Postbacks with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Common Modules diver does not work on Satellite L350 with Win XP

  The diver of common Modules is * not working *.
  How it does not work is because when I try to install Toshiba controls it tells me that "TOSHIBA common Modules is not installed on your computer. I can go on, but it does not (obviously). I've tried versions 1.00.05, 1.00.08 (both of which are on the European driver from Toshiba site) and 1.00.22SE, 6.05.01.TE (from another site) and none of them work.

  After you have installed one of them I get this message from PowerSaver: 'TOSHIBA common Modules does not run correctly. You can use TOSHIBA Power Saver. "A strange thing is that the driver Toshiba common Modules _doesn ' t appear in Add/Remove Programs_ and I can't find the place where to uninstall it. How I installed other versions is simply their execution.

  My laptop is a Satellite L350 PSLD0C-03N08C (http://www.toshiba.ca/web/product.grp?lg=en§ion=1&group=1&product=8193&p = 8282 #spectop art).
  Toshiba Canada site has only the drivers Vista (VAP). All the drivers on Toshiba Europe site worked perfectly.
  * Please help me, this is the only part that is left for my downgrade.* I can't use Power Saver, the Fn keys and all these important things if I don't get fixed.

  + PS for those who are interested in a history of my downgrade problems can be found here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=37432+

  Hello

  As you said that it is a Canadian model of laptop and if the common Modules are not designed specifically for this laptop then this application will not work correctly.

  So, we found a reason why the joint work of modules-> this software doesn t is not designed for your notebook from the series.

  Unfortunately, if the Toshiba Canada page doesn t provide the Win XP tools and utilities for you laptop, then you must wait and must run Notepad without these tools.

  Welcome them

• Please help, I've updated my iPad has a few days, but by exploring my camera I discovered that the front camera did not work while the main or back camera is not working properly, please, anyone with a secure solution please share.  Thank you

  I have tried everything that I could even, to the extent where I hard reset my device, but that it does not work, no possible solution please share with me, that I will accept it gladly. Thanks in advance.

  Already restore you factory? If this is not the case, try this. If you have, or it did not help the cause can be hardware partner. Take it to your local Genius Bar or Apple authorized service provider. -AJ

• Control buttons do not work on Satellite A300 with Win XP

  Hello

  A few days ago, I bought a new Toshiba A300-1MX.
  I had windows XP installed. Service Pack 3. BIOS is version 1.50 (told in the BIOS).

  The problem: my brilliant media keys do not work. They simply do not respond.
  Anyone with any suggestions?

  I downloaded the driver for models commute for XP and the utility hotkey for XP, and after installing it, the FN keys work (ESC, F1-5-6-7-10-11) (although that might not work F2, 3, 4, 8, 9, 12).

  Thank you people.
  Sascha

  Because the A300-1MX belongs to the series PSAGCE, you must choose and download the XP drivers for this model.

  I checked the page of the Toshiba driver and there is a BIOS 1.40 only. So Don t understand why you talk about 1.50 Bios.

  Second, Toshiba media buttons will work if you install the Toshiba utility controls on the page.
  Finally and above all, you need the common Modules for the FN buttons work.
  Only FN as F9 keys for example need an additional tool like Touch Pad on / off Utility
  The Fn F2 or F3 FN will work if a power gain has been installed and hibernation is enabled.

  So, as you can see you need more tools!

• Solution Center does not work under Windows 7 with Officejet Pro L7780

  Downloaded the latest version of the software for Windows 7 and the first issue was when you try to do an installation complete you get a fatal error at the 96 percent mark when she did the configuration. I looked on the web and found a lot of posts on the same problem. Then, I just uninstalled and made a gradual installation.

  Main printer DRIVER installed first. Then did the functions of imaging followed by the solution Center device.

  Installed everything, but when you run the solution center it says it can't open because incomplete installation.

  The printer works from Windows 7.

  I have an XP machine and Solution Center working on it.

  Any suggestions anyone.

  This thread has resolved the problem installing the software that supports the HP Officejet Pro l7780 for use on Windows 7.

  The event viewer showed mistakes that network location for %APPDATA%\protector.exe is not found.

  Even if I couldn't run the original installation of solutioncenter.msi to work without errors in the log file, without making any changes, which has not completely solved the problem.

  Since solutioncenter, initially did not work, I decided to run solutioncenter.msi manually and look at the log file. See errors in the log file we made changes to the database with Orca solutioncenter.msi. It took us on a long road that does not initially sense that HP would put something out there that produced errors in the msi log file.

  I don't know how the setup.exe uses solutioncenter.msi?

  The changes that doesn't seem it to matter when you run the setup.exe file that is provided in the download.

  If I used the modified solutioncenter.msi or version orginal of it as downloaded from HP running setup.exe site had no importance regarding obtaining solutioncenter work in windows 7, canceled only changes in the solutioncenter log file errors.

  I had to make the following changes to the environment variables to get the full package to work, but what is strange is that I could replace the changeed solutioncenter.msi or the original solutioncenter.msi and run setup.exe, with the following environment changes didn't matter. The solution Center has worked in Windows 7 using one of the solutioncenter.exe and setup.exe.

  Apparently, setup.exe does not use the MSI directely. I think that HP responses suggested that in a previous thread.

  Add these entries (click new...) for the owner user variables and System variables:

  In the name box: APPDATA

  In the value box: %USERPROFILE%\AppData\Roaming

   

  Run setup.exe and event viewer does not display % APPDATA % Scriptures and all work.
  

   

  Thanks for all help on this.
  

• Vista not work not for several months. Set in China and the technology put a pirate copy, now afraid to use. Help

  Christmas 2008 I bought my daughter a laptop with Vista pre-installed.  In May 2009, my daughter called me and told me that her laptop won't turn on.  I am divorced and the children live with their mother in California.  They spend the summer with me in China.  When they arrived in the summer, my daughter brought her phone with her to get fixed.  We took him to the I.T. square in Beijing and the tech said that Vista has been damaged and that he would have to re - install.  When we came back we found he had re-installed a pirate (in Chinese) copy of Vista.  It was last July.  My daughter was afraid to use his cell phone since last summer.  Any advice on how I can get the computer back to normal.  It was bought with Vista on it initially and always has the product key on the bottom of the computer.  Any help would be greatly appreciated!

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   
  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner