Vista restarts after 30 min. at the beginning and is OK, the rest of the day.

Similar Questions

• The computer was restarted after a bugcheck. The bugcheck was: 0x0000003b (0xfffff880113022ec, 0xfffff88008266950, 0x00000000c0000005, 0 x 0000000000000000).

  The beginning of this month, I have built me a new platform game and installed Win 7 HP. everything worked very well at 18. I was just browsing the internet, and all of a sudden my computer froze for a second, then went to the BSOD. Inside, I saw that it was a "memory dump". He did 3 times the same day where I just internet browsing. Upset A, looked autour online and I've seen where people have said that it could be caused due to the update software. So I updated what he needed and then with my day. Well, it happened earlier this morning. I decided to look in my event viewer and see if I could find what is the problem. I found a mistake:

  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000003b (0xfffff880113022ec, 0xfffff88008266950, 0x00000000c0000005, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 072414-16614-01.

  So I decided to call Microsoft and their solution to the problem was "reinstall Windows! Reinstall Windows! "WHAT! REINSTALL WINDOWS! It will take me 2 DAYS to get my computer to the way I want it with all my programs, movies, music. I know that there is another solution to this problem. I want to know the cause of the BSOD. So I was reading around and I've seen where people would say upload the file to dump memory to Skydrive and someone will look into it to find a problem. Well, I downloaded the .dmp file to my Onedrive and I hope and pray someone can read and help. (https://onedrive.live.com/redir?resid=E4B0911EE97A02C1 107 & authkey =!) AAR8h7CfZxBp7aw & ithint = the file % 2cdmp) I initially thought it was a problem of RAM because he said that it was a picture of 'memory '.

  Help, please.

  Thank you!

  Original title: Blue Screen of Death on the new computer. Help, please

  Update of these older drivers may help.

  Update Corsair Link the software to version 2.6.5214 Installer
  http://www.Corsair.com/en-us/support/downloads

  BELKIN F7D4101 Play Wireless USB Adapter firmware update

  http://www.Belkin.com/us/support-article?articleNum=4726

• The computer was restarted after a bugcheck. The bugcheck was: 0x00000001 (0 x 0000000000000000, 0 0000000000000001, 0x00000000742d2e09, 0xfffff8800aa00b60).

  Computer BSOD'd 2 x today.  The event log States:

  The computer was restarted after a bugcheck. The bugcheck was: 0x00000001 (0 x 0000000000000000, 0 0000000000000001, 0x00000000742d2e09, 0xfffff8800aa00b60).

  LEAPC_INDEX_MISMATCHERREUR (1)
  This is an internal error in the kernel. The most common reason to see this
  error checking is when a file system or a driver has several mismatched
  visits to disable and re-enable the TTB. The data key item is the
  Thread-> CombinedApcDisable field. It's two separate 16-bit
  the SpecialApcDisable and the KernelApcDisable fields. A negative value
  either indicates that a driver has disabled APC normal or special
  (respectively) without reactivation; a positive value indicates that
  a driver allowed normal or special APCS (respectively) too many times.
  Arguments:
  Arg1: 00000000742d2e09, address of function or worker system call
  Arg2: 0000000000000000, thread-> ApcStateIndex
  Arg3: 0000000000000001 (thread-> SpecialApcDisable < 16)="" |="" thread-=""> KernelApcDisable)
  Arg4: fffff8800aa00b60, call type (system call 0-, 1 - routine worker)

  Debugging information:
  ------------------

  TRIAGER: Could not open the file of triage: e:\dump_analysis\program\triage\modclass.ini, error 2

  FAULTING_IP:
  + 0
  00000000' 742d2e09?              ???

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  BUGCHECK_STR: 0X1

  Nom_processus: ccSvcHst.exe

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from fffff800032841a9 to fffff80003284c00

  STACK_TEXT:
  fffff880 '0aa00928 fffff800' 032841a 9: 00000000'00000001 00000000' 742d2e09 00000000'00000000 00000000'00000001: nt! KeBugCheckEx
  fffff880 '0aa00930 fffff800' 032840e0: 00000000'00001 c 48 00000000' 0780e0a8 00000000' 0780e970 00000980'00000018: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '0aa00a70 00000000' 742d2e09: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceExit + 0 x 245
  00000000' 0780e9b8 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x742d2e09

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! KiSystemServiceExit + 245
  fffff800'032840e0 4883ec50 sub rsp, 50 h

  SYMBOL_STACK_INDEX: 2

  SYMBOL_NAME: nt! KiSystemServiceExit + 245

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrnlmp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 5684191c

  FAILURE_BUCKET_ID: X64_0x1_SysCallNum_4_nt! KiSystemServiceExit + 245

  BUCKET_ID: X64_0x1_SysCallNum_4_nt! KiSystemServiceExit + 245

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  Former pilot who need update

  dne64x.sys (Cisco VPN driver since 2008)

  If you continue to plant I remove Symantec and using MSE instead

  Symantec is a common cause of BSOD.

  
  
  I remove and replace it with Microsoft Security if you are using Windows 7 and if you win 8 or higher, use the built-in Defender.
  
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000116

  Hello

  I recently got a new PC, initially, I installed the Windows 10 and it worked quite well apart from crashing just by playing a game. Thought that accidents were due to Windows 10 I uninstalled Windows 7 from my old office and installed on the new desktop.

  Same problem with Windows 7, if I play Tera Online at some point which seems to be random, the system hangs, I get a black screen and press the power button for four seconds for the computer to shut down properly because it is not responding to something else.

  Interesting to note that other games (like Batman Arkham Knight) will work perfectly.

  The error that appears in the Windows Event Viewer is:

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000116 (0xfffff880060f9128, 0xffffffffc000009a, 0xfffffa800710f4e0, 0 x 0000000000000004). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 071415-8174-01.

  Download link for the dump

  Thank you for the help, I used the Debugging Tools for Windows to read my memory dump that led me to believe the error is caused by nvlddmkm.sys which seems to be among the NVIDIA drivers. This track seems to me the solution because I need to underclock my graphics card. This seems to have solved the problem, so I'll try to find a solution in other ways that the Microsoft Community as sounds more like a problem of material or at least a NVIDIA issue.

• The computer was restarted after a bugcheck. The bugcheck was: 0x000000d1 (0 x 0000000000000002, 0 x 0000000000000001, 0 x 0000000000000018, 0xfffff88005254d16)

  Hello Microsoft,

  Nice day!

  Laptop to our head of service stops automatically. I checked with the other posts, some are the same, but can't find the bug error we encounter. Please check the below error code

  The computer was restarted after a bugcheck. The bugcheck was: 0x000000d1 (0 x 0000000000000002, 0 x 0000000000000001, 0 x 0000000000000018, 0xfffff88005254d16). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 23025-071714-01.

  Event ID: 1001

  The dump file is shared on SkyDrive. The URL is

  https://onedrive.live.com/redir?RESID=A21E1CFD1B8F0B96%211092

  Thank you very much!

  Kind regards

  Sidney Mendoza

  Hi Sidney,

  The attached file of the DMP is to bug checking DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) .

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

  BugCheck D1, {18, 2, 1, fffff88005254d16}

  Argument 1 is 0000000000000018 indicating completely invalid memory was referenced. We don't even need check, we can tell just by looking at her that he isn't a valid address in any way.

  3: kd > k
  Call child-SP RetAddr site
  fffff880'031fd608 fffff800'034 d 7169 nt! KeBugCheckEx
  fffff880 '031fd610 fffff800' 034d5de0 nt! KiBugCheckDispatch + 0 x 69
  fffff880'031fd750 fffff880'05254 d 16 nt! KiPageFault + 0 x 260
  fffff880'031fd8e0 fffff880'05257722 athrx + 0x18d16
  fffff880 '031fd930 fffff880' 05256cac of the athrx + 0x1b722
  fffff880 '031fd9c0 fffff880' 052ddb8b of the athrx + 0x1acac
  fffff880 '031fda00 fffff880' 052e4d61 of the athrx + 0xa1b8b
  fffff880 '031fda30 fffff880' 052634 to 7 the athrx + 0xa8d61
  fffff880 '031fda90 fffff880' 0523d9fa of the athrx + 0x274a7
  fffff880 '031fdac0 fffff880' 016ae9b6 of the athrx + 0x19fa
  fffff880 '031fdb00 fffff800' 034e230c ndis! ndisInterruptDpc + 0x1b6
  fffff880 '031fdb90 fffff800' 034cf8ca nt! KiRetireDpcList + 0x1bc
  fffff880'031fdc40 00000000 00000000' nt! KiIdleLoop + 0x5a

  We can see the pilot who attempted to access invalid memory was athrx.sys , which is the Atheros network card driver.

  3: kd > .trap fffff880'031fd750
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  rbx Rax = 0000000000000000 = 0000000000000000 rcx = fffffa8006a01030
  RDX = fffffa8006be3440 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff88005254d16 rsp = fffff880031fd8e0 rbp = 0000000000000000
  R8 = 0000000000013601 r9 = 0000000000000000 r10 = fffff80003462000
  R11 = 0000000000000000 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei ng nz na po nc
  athrx + 0x18d16:
  fffff880'd 05254 16 c7401800000000 mov dword ptr [rax + 18 h], 0'00000018 ds:00000000 is?

  We can see on the statement, we do not have, we didn't move a pointer in the rax register. Rax sucks because of all the x 64 non volatile registers are regarded as garbage, as well as their context is not registered in the hotpath kernel.

  ----------------------------

  1. make sure that all the network drivers (especially Atheros) are up-to-date.

  2 remove and reinstall McAfee with Microsoft Security Essentials for purposes of troubleshooting temporary, as it may very well cause conflicts NETBIOS:

  Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  MSE- http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  Kind regards

  Patrick

• The computer was restarted after a bugcheck. The bugcheck was: 0x000000f4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0).

  Original title: windows 7 starts more than 18 minutes take it please help

  It's a copy of errors

  Log name: System

  Source: Microsoft-Windows-WER-SystemErrorReporting

  Date: 03/10/2012 09:19:24

  Event ID: 1001

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: iqraa

  Description:

  The computer was restarted after a bugcheck.  The bugcheck was: 0x000000f4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 100312-800425-01.

  The event XML:

   

     

      1001

      0

      2

      0

      0

      0 x 80000000000000

     

      5848

     

     

      System

      IQRAA

     

   

   

      0x000000F4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0)

      C:\Windows\MEMORY. DMP

      100312-800425-01

   
  Hello
   
  Did you of recent changes to the computer before the show?
   
  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION: This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.
   

  Refer to this link: http://msdn.microsoft.com/en-us/library/ff560372%28VS.85%29.aspx

  Question: Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  In order to solve the problem in a better way, one must look the discharges with the debugging tools for Windows.

  Please, start Windows Explorer and navigate to the C:\Windows\Minidump folder. Then, copy the files to your desktop, zip dmp dmp all in one zip archive and download the zipfile to your SkyDrive folder [1] public and post a link here.

  If you do not see the dmp files, make sure that your Windows is correctly configured to generate shocks.

  See this link for more information.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  http://support.Microsoft.com/kb/254649

  I would recommend also refer to this article for more information and troubleshooting on blue screen errors.

  Resolve stop (blue screen) errors in Windows 7:   http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

• The computer was restarted after a bugcheck. The bugcheck was: 0x0000001e (0xfffff803b5ef8b28, 0xfffff8800129c100, 0xffffffffc0000046, 0xfffff8800129c1a0).

  Dear team,

  Our server Dell R 720 Windows server 2012 system restarts by giving the event ID: 1001.

  We use 14 Escan antivirus, and we don't have any ISO in Server system software, please suggest.

  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000001e (0xfffff803b5ef8b28, 0xfffff8800129c100, 0xffffffffc0000046, 0xfffff8800129c1a0). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 060915-47656-01.

  + System

  -Supplier

  [Name]  Microsoft-Windows-WER-SystemErrorReporting
  [Guid]  {ABCE23E7-DE45-4366-8631-84FA6C525952}
  [EventSourceName]  Error checking
   
  -EventID 1001

  [Qualification] 16384
   
  Version 0
   
  Level 2
   
  Task 0
   
  Opcode 0
   
  Keywords 0 x 80000000000000
   
  -TimeCreated

  [SystemTime] 2015-06 - 09 T 04: 16:14.000000000Z
   
  EventRecordID 437504
   
  Correlation
   
  -Execution

  [ProcessID] 0
  [ThreadID] 0
   
  Channel system
   
     
   
  Security

  -EventData

  param1 0x0000001e (0xfffff803b5ef8b28, 0xfffff8800129c100, 0xffffffffc0000046, 0xfffff8800129c1a0)
  param2 C:\Windows\MEMORY. DMP
  param3 47656-060915-01

  Associated bdfsfltr.sys BitDefender AntiVirus FS Filter driver.  I remove it and use the built in Defender in its place

• iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

  Hello

  My iMac (late 2012 if I remember) restarts when under heavy load for a while.

  I work a lot with Final Cut Pro X.

  Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

  Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

  I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

  Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

  How can I understand what is happening?

  Thank you very much.

  Thomas

  First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

• MovieMaker in Windows vista stops after appox 4% of the video encoding

  Can transfer files in MP4 format, dvdmoviemaker starts to code for burning, then the program stops working after about 4% finished

  It may be interesting to try to disable all filters in
  Creation of DVD before burning, but I suspect there
  is a problem of compatibility with the. MP4 files.

  See the following article:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll waaay down for...) What to do in case of problems)

  If you convert the. MP4 files to the. WMV format
  before importing, you can have a better result:

  There are to many converters available on the net...
  some free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Vista restarts after "Thank You" screen

  I am trying to install a Windows Vista using Windows Deployment Services, and I'm having a problem with Vista 32 bit.

  After beating my head against the wall trying to install Gigabit Intel on a Vista 32 bit boot.wim drivers with no luck, I tried to switch to a Windows 7 Boot.wim to install my captured image. The Windows 7 boot image found my WDS fine without any problem of network server and installed the image of Vista without problem, but now at startup. Vista not normal is to add the user name, the date/time value, Windows Update settings, etc... display 'Thank You' and then when it would normally bring the Office for the first time, the system restarts, then brings back the initial Setup "Type your username" all over again. No matter how many times I put in user names, configure the date and time, it reboot always back to the same screen.
  Any help would be great, thanks!

  http://social.technet.Microsoft.com/forums/en-us/itprovistadeployment/threads is a more appropriate forum for this kind of question.

• The computer was restarted after a bugcheck. The bugcheck was: 0x0000007f

  Get a BSOD on Windows Server 2008 R2 SP1 with "the computer restarted after an error checking.  "The bugcheck was: 0x0000007f (0 x 0x00000000000006f8, 0 x 0000000000000008, 0000000080050033, 0xfffff800018c3484).

  -a ran the system file without error checking

  -a ran diagnostics material without errors

  -all updated hardware drivers

  -windows update updates

  -a ran chkdsk on drives without errors

  I excluded the material with Dell.

  I have the minidumps available if it lights all but check these in the BSOD Viewer, it shows.

  Bug control chain: UNEXPECTED_KERNEL_MODE_TRAP

  Bug check code: 0x0000007f

  Parameter 1: 00000000'00000008

  Parameter 2: 00000000'80050033

  Parameter 3: 00000000' 000006f8

  Parameter 4: fffff800'018 c 8484

  Caused by the driver: ntoskrnl.exe

  Caused by Adresss: ntoskrnl.exe + 75bc0

  Might try to uninstall the AV as another post suggested - will show the result if all of the changes.

  Any ideas what this could be?

  Crash dump...

  The debugging session: 18:40:29.750 Thu Jul 3 2014 (UTC - 04:00)
  System Uptime: 0 days 20:07:06.256

  Loading the kernel symbols

  BUGCHECK_STR: 0x7f_8

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP

  Nom_processus: ledgers.exe

  CURRENT_IRQL: 1

  LAST_CONTROL_TRANSFER: from fffff800018d0169 to fffff800018d0bc0

  Msinfo32.txt

  07/03/2014 17:22 application Error Faulting application name: Ledgers.exe, version: 1.0.0.0, time stamp: 0x2a425e19
  The failed module name: Ledgers.exe, version: 1.0.0.0, time stamp: 0x2a425e19
  Exception code: 0xc0000005
  Offset: 0x0000ad75
  ID of the process failed: 0 x 8940
  Start time of application vulnerabilities: 0x01cf96bab4486883
  The failing application path: C:\Program Files (x 86) \Client\Ledgers.exe Prophet
  Path of the failing module: C:\Program Files (x 86) \Prophet Client\Ledgers.exe
  Report ID: a9efac34-02d6-11e4-a027-a4badb445132

  28/06/2014 18:53 application Error Faulting application name: Ledgers.exe, version: 1.0.0.0, time stamp: 0x2a425e19
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
  Exception code: 0xc0000005
  Offset: 0x00014ab0
  ID of the process failed: 0x21c0
  Start time of application vulnerabilities: 0x01cf92d1ba345f0a
  The failing application path: C:\Program Files (x 86) \Prophet Client\Ledgers.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 866145fa-fef5-11e3-9b5a-a4badb445132

• Server restarts after a bugcheck. The bugcheck was 0 x 00000050 (Windows 2003)

  Having problem with reboots on a virtual server with Windows Server 2003 SP2.
  Sometimes sometimes during the night and sometimes during the day, a week between sometimes and a couple of months. Cannot see logically for restarts, please help. See analysis of bug-check below:

  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {bcf38c28, 0, bf8b7fc4, 0}

  Probably caused by: win32k.sys (win32k! DestroyThreadsObjects + 4f)

  Follow-up: MachineOwner
  ---------

  3: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: bcf38c28, memory referenced.
  Arg2: 00000000, value 0 = read operation, 1 = write operation.
  Arg3: bf8b7fc4, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 00000000, (reserved)

  Debugging information:
  ------------------

  READ_ADDRESS: bcf38c28

  FAULTING_IP:
  Win32k! DestroyThreadsObjects + 4f
  bf8b7fc4 8b 01 mov eax, dword ptr [ecx]

  MM_INTERNAL_CODE: 0

  Nom_image: win32k.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4f2a984f

  MODULE_NAME: win32k

  FAULTING_MODULE: win32k bf800000

  DEFAULT_BUCKET_ID: DRIVER_FAULT

  BUGCHECK_STR: 0 X 50

  Nom_processus: mcwql2.exe

  CURRENT_IRQL: 1

  TRAP_FRAME: b7b53b78-(.trap 0xffffffffb7b53b78)
  ErrCode = 00000000
  EAX = bcf38bf8 ebx = 00000022 ecx = bcf38c28 edx = 80000002 esi = f1eccc98 edi = 00000198
  EIP = bf8b7fc4 esp = b7b53bec ebp = b7b53c3c iopl = 0 nv up ei pl zr pe nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010246
  Win32k! DestroyThreadsObjects + 0x4f:
  bf8b7fc4 8b 01 mov eax, dword ptr [ecx] ds:0023:bcf38c28 = bcf37ee8
  Reset the default scope

  LAST_CONTROL_TRANSFER: from 8085ed47 to 80827c 83

  STACK_TEXT:
  b7b53ae8 8085ed47 bcf38c28 00000050 00000000 nt! KeBugCheckEx + 0x1b
  b7b53b60 bcf38c28 8088c 820 00000000 00000000 nt! MmAccessFault + 0xb25
  b7b53b60 bf8b7fc4 bcf38c28 00000000 00000000 nt! KiTrap0E + 0xdc
  b7b53bf4 bf8b835c 8a4bfdb0 00000000 00000000 win32k! DestroyThreadsObjects + 0x4f
  b7b53c3c bf8b6bb6 b7b53c64 00000001 bf8b7a13 win32k! xxxDestroyThreadInfo + 0x23e
  b7b53c48 bf8b7a13 8a4bfdb0 00000000 00000001 win32k! UserThreadCallout + 0x4b
  b7b53c64 8094c3d2 8a4bfdb0 88829450 00000001 win32k! W32pThreadCallout + 0x3a
  b7b53cf0 8094c68f 00000000 b7b53d4c 8082e0d6 nt! PspExitThread + 0x3b2
  b7b53cfc 8082e0d6 b7b53d48 88829450 b7b53d3c nt! PsExitSpecialApc + 0x1d
  b7b53d4c 00000000 00000001 80889897 b7b53d64 nt! KiDeliverApc + 0x1ae
  b7b53d4c 7c82845c 00000000 00000001 b7b53d64 nt! KiServiceExit + 0 x 56
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  00000000 00000000 00000000 00000000 0x7c82845c 009efe5c

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  Win32k! DestroyThreadsObjects + 4f
  bf8b7fc4 8b 01 mov eax, dword ptr [ecx]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: win32k! DestroyThreadsObjects + 4f

  FOLLOWUP_NAME: MachineOwner

  FAILURE_BUCKET_ID: 0x50_win32k! DestroyThreadsObjects + 4f

  BUCKET_ID: 0x50_win32k! DestroyThreadsObjects + 4f

  Follow-up: MachineOwner
  ---------

  / P

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows vista restart after I stop I have to unplg the power to stop

  whenever I closed my system reboot

  Hi antoniocasillas,
   
  -Remember you proceed with recent computer between the calendar changes when things worked fine and now?
  
  Your computer restarts automatically if your he encounters an error that requires him to plant.
   
  Try to activate the option "disable automatic restart on system failure" to check if you receive the error message for the same.
   

  This option prevents Windows from automatically restarting if an error of Windows to fail.

  In the screen "Advanced Boot Options" choose this option.

  Check out this link to do the same thing:

  Start your computer in safe mode

  Advanced, including safe mode startup options

• How to restart my iPad mini if the PIN is forgotten, and the iPad is disabled.

  After loading Mcaffe security on my iPad mini, I entered several times 6-digit pin code.  Initially, he showed disable for 5 minutes, then 15 minutes, and then a message to go to teeth.  I can't find a way to restart the mini to be able to go to iTunes

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Satellite A110-275 restarts after a stop on the current

  Hello

  After installing xp sp3 if I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  If I turn off the external power (or pull the power cable on) if the machine is running on its battery - then stop - everything works fine. I have checked the event logs and see no error which would cause a reboot on shutdown. I disabled the reboot on system error switch and I turned off the wake of the bios on the options.

  I also looked in Device Manager and off anything that could wake the machine after his stop (only found the modem). I am at a loss - I don't see why external power would cause the works to restart but battery very well. Finally its possible this safe mode can also not working after installed sp3.

  If anyone has any ideas - I'd appreciate really them. It looks like there may be a newer bios available (I'm on V1.2) but I've seen a few posts cautioned against an updated bios windows at level - once again any info - very very welcome.

  System information:
  Toshiba Satellite - A110-275
  Windows XP pro - sp3

  > After installing xp sp3 so I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  Have you noticed this problem before installing SP3?

  Its strange noises that this occurs only when the laptop is connected to the power adapter

  I searched in the forum for similar issues and in many cases enabled Wake up on LAN would cause a reboot.
  I know, you have this disabled in BIOS, but you should also check the LAN card properties in Device Manager.
  You will find an Advanced tab can disable this option too!

  Satellite A110-275 belongs to the series of PSAB0E.
  There is a new BIOS for PSAB0E series.

  BIOS v2.0 is OS independent. Means that he s created for Win XP and other OS.
  V5.40 BIOS is only for Vista OS.

  If you are using Win XP, then you should take the independent BIOS of the OS!

  Here you can find details of the update to the BIOS:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60