Windows vista restart after I stop I have to unplg the power to stop

Similar Questions

• Windows 7 restarts after a stop

  Hi everyone, I have had this problem for as long as I can remember. When I would shut down Windows 7 it would end closing and then, to the point that it is supposed to stop, it restarts

  It happens all the time and I couldn't find a solution after trying many things I've seen on the Windows community forums with similar problems. I tried updating the bios, changing "PowerdownAfterShutdown' from 0 to 1 in the registry, and then 1-0, checked the event viewer and found no error message, reset the BIOS to factory settings by removing the battery for half an hour, and even after the upgrade to a brand new SSD and install Windows 7 from scratch the problem persists. This leads me to believe that it has something to do with the motherboard and BIOS; but like I said that I've already updated and even reset the BIOS and it still happens.

  System Specs:

  Intel Core 2 Quad 2.4 GHz (Q6600 B3)

  Card mother Gigabyte (GA-N650SLI-DS4)

  8 GB of RAM (4 x 2 GB DDR2)

  NVIDIA GeForce GTX graphics 760

  SSD 250 GB Samsung 840 Evo (operating system)

  Barracuda 2 TB HDD (mass storage)

  I am running Windows 7 Professional 64 bit

  Any help would be greatly appreciated!

  Hey Gordo,

  Please keep us updated on the status of the issue.

  It is possible that there is a hardware problem.

  I suggest you to contact the computer manufacturer for assistance.

  Thank you

• How to disable the windows vista edition welcome screen Home premium 64-bit when the power of the PC

  I just bought a brand new TOSHIBA Satellite A505 S6960 =.  I want to disable the Welcome screen and the analysis of the icon of corporation of microsoft at the start of the time or turn on. That's slowing down my computer start on time. I did these steps to get rid of the Welcome screen, but it did not work. I went to the Panel---> administration--->--> general system configuration tool---> select Start normal and banded 'selective startup.
   
  I also did this too by going to control panel of-->---> general administration tool---> click services hied all and disable all. This help me get rid of the microsoft corporation screen during startup scan, but do not get rid of the Welcome screen.

  Any idea or suggestion will be useful.

  Check these two:
  http://www.Vistax64.com/tutorials/185637-Welcome-Center-enable-disable-startup.html

  http://www.Vistax64.com/tutorials/185642-Welcome-Center-enable-disable-all-users-startup.html Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

• I buy an original windows vista.y after that I have format my computer, I can't activate it? Msg show me the product already use it?

  I buy an original windows vista.y after that I have format my computer, I can't activate it? Msg show me the product already use it?
  my email * address email is removed from the privacy *

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.
   
  Have you tried to phone activation?  Activate by phone.  http://TechNet.Microsoft.com/en-us/library/cc736912 (WS.10) .aspx
  Or click Start and type ' slui.exe 4.  Do not meet the guests until you are asked if you want to speak to an agent.  An agent can tell you the State of the product key.
   
   

• December 15, 2011 updates to Windows Vista. After that automatic download and install on stop, my computer would not start up

  Original title: 15 December 2011 update of Windows Vista

  After that automatic download and install on stop, my computer wouldn't boot. I had to run Startup Repair 2 days in a row and remove the updates. They are always there to be installed when I stopped. Help, please!

  Hello

  I suggest you to see these steps:

  Step 1:

  I suggest to reset Windows Update components and follow step 2.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  After reset, you will find that Windows 8 or 9 update that must be installed.

  Try to update one by one and check.

• Getting fast to install Windows Vista SP1 after you install successfully.

  Original title: message update for something, I've already updated.

  I keep told that there is an update due after that I have already installed it. He tells me that I need to install service pack 1 when it is already installed. Help, please.

  Hi Billy,

  Thanks for posting your question in the Microsoft Community forum.
  Description of the problem, I see you have found fast to install Windows Vista SP1 after you install successfully.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Windows Update or Microsoft Update repeatedly offers the same update
  http://support.Microsoft.com/kb/910339

  Note: This link applies to Windows Vista.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  For more information, please see the link.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• PSL40E xp restarts after a stop only on the power supply current

  Uncheck the automatically restart in the system failure section
  Disable wake up LAN
  Disable installation
  SP2 or sp3, same problem
  Install any drivers
  knowledge microsoft (Roxios Easy CD...) same problem, restart after a stop

  Bios Flash, SM bios for vista and win 7, but not for xp on page drivers toshiba...

  This occurs when the LAN cable is connected to your laptop only?

• I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file.

  Original title: registry exe problem

  I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file. This also occurs when you download the software, which makes it difficult, because the file is not on the pc yet. All solutions?

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  I hope this helps. Good luck.

• My hard drive is damage and the deleted product key sticker how can I reinstall my windows vista if I don't even have a cd/dvd to reinstall?

  How can I install windows vista on a new hard drive?

  I have a toshiba satellite L505D-S5965 my HDD is damage and the deleted product key sticker how can I reinstall my windows vista if I don't even have a cd/dvd to reinstall

  In this case, it is preferable to contact Toshiba support and discuss the issue with them. They may be able to send you DVD.

• My computer is windows vista and internet explorer 8 I have trouble on all websites with freezes and hang-ups.

  My computer has windows vista and IE 8 I'm have trouble on all websites freezes and hang ups this isall time!.

  original title: hangupand freezes!

  You scam for Malware as recommended?

  If the above does not fix your repost please problem in the internet forums explore the link below

  http://answers.Microsoft.com/en-us/IE

• When I try to install lightroom 6 it tells me I have windows vista, but I did NOT I have windows 7

  When I try to install lightroom 6 it tells me I have windows vista, but I did NOT I have windows 7

  Is your Windows 7 64 bit?

  Try changing the compatibility mode of Windows 7 configuration file and run the installer again.

  Right-click on the Setup file and select Properties option.

  Then click on the Compatibility tab.

  Set the operating system to Windows 7 and try.

• I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update?

  I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update? What should I do

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Why Windows Vista Home Premium squeeze all my open tabs in the right side of the taskbar?

  Normally, the tabs open or reduced are distributed on the task bar, which allows you to see about 8 or nine tabs in the taskbar. Recently, however, they all push in the far right of the taskbar, allowing two only is visible at a time. If I opened more than two, I have to click a scroll button to scroll through my tabs. Why is this happen and how can I get back to normal?

  All other spaces in the taskbar is open and unused.

  Hey Evan 1010,

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Make sure that the toolbars options are not enabled on the taskbar. Follow these steps:

  (a) open Taskbar properties.

  (b) go to the tab toolbars, clear all options.

  (c) click on apply and ok.

  Add a toolbar to the taskbar

  http://Windows.Microsoft.com/en-us/Windows7/add-a-toolbar-to-the-taskbar

  Method 2: Also, make sure that the option never combine is selected in the taskbar buttons. Follow these steps:

  (a) open Taskbar properties.

  (b) go to the tab of taskbar, under the taskbar appearance.

  (c) select the option never combine for the taskbar buttons tasks form the drop-down list.

  (d) click on apply and ok.

  Change appear on the taskbar buttons

  http://Windows.Microsoft.com/en-us/Windows7/change-how-buttons-appear-on-the-taskbar

  Method 3: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Provide for the issue of the screenshot.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• How to create a recovery partition bootable to windows vista ultimate with all installed programs, updates and all the configuration as the factory recovery disc?

  Hello world!!

  I formatted my HP laptop, then I installed Windows Vista Ultimate, I used before Windows Vista Home Edition, but when I made this new installation I lost all programs and the configuration that I have before, so I installed all once again, but I don't have a recovery for this partition... so I would like to have one... in the case of making a mistake or some accident my system virus or something that my system fail totally I recover my system, in this case completely without installing all windows and programs and updates... Well, you know take in many times to do it one by one... it would be nice if someone can help me with this, please explain the details, I'm no expert on this, but I would like to know... Tank you.

  • Response
  • Quote
  Type in the start - Help and Support
   
  PC Backup
   
  Choose the topics
   
  Back up your programs, files and system settings
  Restore your computer from a system image backup
  --
  ..
  --
  "eaglewarior" wrote in message news: af8c8e21-4-dec-4e67-9700-826358e2d489...
  >
  > Hi everyone!
  >
  > I formatted my HP laptop, then I installed Windows Vista Ultimate, I used
  > I have Windows Vista Home Edition, but when I made this new facility
  > lost all programs and the configuration that I have before, so I installed all
  > once again, but I don't have a recovery for this partition... so, I would
  > like to have one... in case of make a mistake or some accident of virus my
  > system or something that my system completely fail I will recover completely
  > my system, in this case without installing all programs and windows and
  > updates... Well, you know take many time to make this one... so
  > would be nice if someone can help me with this, please explain the details
  > I'm no expert on this but I would like to know... Tank you.
  >
  > a.. Replyb... Quote
  >
   
   

• Is it possible to put in place a wake-up call to the PC/computer Windows Vista laptop? Then, he can wake up in the morning.

  Is it possible to put in place a wake-up call to the PC/computer Windows Vista laptop? Then, he can wake up in the morning.

  Hello Xltdnbl,

  Thank you for using the Microsoft Windows Vista Forums.  In Windows Vista, there is not a revival on the operating system, but you can add a.  The site below has different types of alarms that can be added.  You can set the alarm to wake up with the sidebar.

  http://Gallery.live.com/liveItemDetail.aspx?Li=354455a7-0b97-42d7-adb1-09aeebee0c46&BT=1

  Please let me know if this was helpful, or if you're still having problems. Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.