Vista stops see attached printer.

Similar Questions

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• Windows 7 latop stopped to 'see' the printer wireless

  Recently, my windows 7 extremely connected to my home hub wireless laptop stopped seeing my wireless printer.  I above desk connected via Ethernet cable to the hub.  He can see the wireless printer.  So I don't think that the fault is with my hub or the printer.

  It also happens when I select the network icon in Windows Explorer to the laptop I have now no longer 'see' my drive WD RAID ("plugged" into the hub).  I get it specifically by typing in the address (\\MYBOOKLIVEDUO\DocumentReplica).  And once I did the WD drive is now listed under Network (but disappears again once that I reboot).

  These two conditions occur simultaneously and seem to be the result of the same underlying problem.

  Anyone know what I might be able to do to solve this problem?

  Chris W

  Find the solution advocated for "Peer-to-Peer network error 0 x 80070035 the network path was not found" by Arthur Xie to:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/955717b7-9ea3-424C-9b3a-719520f1b043

  ... has worked.  Thanks to Arthur

  Concerning

  Chris

• Impossible to get w7 x 64 see network attached printer

  I have a Canon Pixma Pro9000 printer attached to a N4200 NAS from Thecus. All other PC can be printed on it without any problem, but I can't get the 2 PC running w7 x 64 to see the printer - still less to print! I went through all the procedures and processes, I can think of to make it work, but I hit a brick wall @ Can someone please help? I would really like to be able to print from these 2 PC without having to move documents to another PC all the time. All other network functions seem to work very well - it's just the printer problem.

  The other computers running Windows XP or flavors of Linux. I was expecting the settings to be the same as Windows XP machines.

  Thank you

  Hello

   

  Make sure that all computers on the network are in the same workgroup.

  Follow the mentioned methods:

  Method 1:

  Run the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Disable sharing protected by password on the host of Win7

  a. Open advanced by clicking the Start button, then on sharing settings Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  b. expand the home or work network profile.

  c. under the password protected sharing, click turn off password protected sharing, and then click save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

   

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  I hope that the above information is useful!

   

• Series A satellite with Vista stopped sees any DVD/CD inserted

  My Toshiba with Windows Vista laptop suddenly stopped see that no matter what DVD/CD inserted, and Device Manager all the time gives the message that the software may not be installed correctly due to the error in the configuration.

  I updated Windows and tried to download the new driver from Internet, but nothing works.

  The Device Manager has a yellow opposite sign MAST * A DVD-RAM (that's the name of the device) and external equipment DVD I tried to use. Don't know what to do.

  Did you get any description of error code? For error example code 39 or something like that? Thank you for posting more information, it might be useful.

  However, I found this thread very similar-themed:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21588&MessageID=79501

  Check this solution maybe you proposal helps

  good luck and let me know if it helps or not

• Vista Stop error message: 0XC012001D after the installation of Windows updates.

  Original title: vista stop working

  Hello

  I need help on vista, because I update and restart and stop working and appear this error code:

  !! 0xc012001d! Registry\Machine\Components\DriverData...

  Hello

   

  
  1. remember the number of the update you have installed?
  2. could you give us the exact error message?
  3. Once you get this error message? Are you able to boot to the desktop?

   

  Method 1.
  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.
   
  Step A.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and the Windows Vista goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   

   

  Method 2.
  Best thing you can do is to perform a system restore just before where the problem occurred.
  I have listed a few articles that explain the system restore in Windows 7.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Thus, the article above is applicable to Windows Vista.

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP 8600 how to stop a current print job?

  How to stop a current print job without turning off the printer? There's no option "to stop printing" anywhere on the touch screen.

  I already downloaded the thing of diagnostics that assures me that there is nothing wrong with the printer.

  Hey,.

  The touch buttons around the screen are always active, even if they are not displayed on the front panel at the current time.  To see where the buttons you can press on the? on the upper right corner and the display will be lit all the buttons.  Have you tried pressing the location of the X when printing?

  Let me know how it goes,

  Jason

• How to force the Win7 to see the printer wireless

  I installed the software for my HP6310 printer on my laptop Presario CQ56 but he did not see my printer wireless networking so she set up a second printer connected. How can I force the HP Solution Center to use a wireless please. O/s is win7 SP2.

  Thank you

  Teriel9

  teriel9 wrote:
  

  I installed the software for my HP6310 printer on my laptop Presario CQ56 but he did not see my printer wireless networking so she set up a second printer connected. How can I force the HP Solution Center to use a wireless please. O/s is win7 SP2.

  Thank you

  Teriel9

  I don't see 802.11 a/b/g/n wireless as a capacity of connectivity for each model (6310 and 6310xi) of your printer. It is most likely the reason why your laptop is not 'see' it.

  There is a bluetooth wireless connectivity. It's a different way of connection that allows only printing capacity.

  You give more than the number of series in your laptop so I have no idea if bluetooth wireless is installed as a standard option. If it is not installed, you must buy a bluetooth dongle to wWalMart and set it up to use that feature.

  Best regards
  ERICO

• Satellite A210 - Vista stopped recording operation

  Hi Forum,

  Whenever I start my A210 Satellite it calls an error message 'Recording Vista stopped functioning' (translated from the French). Does anyone have a solution for this horse?
  I wonder if something really bad could happen anytime soon.

  Thanks for any help.
  Pier

  Your laptop factory settings or you have installed Vista clean?

• Laptop stopped seeing Apple AirPort Express

  Hello

  I'm having a problem with the Wi - Fi with Apple Airport Express (http://www.apple.com/airportexpress/). Windows XP on my laptop Toshiba Satellite M70-339 PSM77E this is crushed about 4-5 days ago and since then he stopped to see the network Airport 4 days ago (but it can still detect the other networks). I think something in the network settings changed on my laptop. That's what I have:

  1 there is Airport Express Mac and a PC laptop Toshiba Satellite M70-339 PSM77E with Windows XP Home Edition.

  2 mac sees the Airport network (and some other neighborhood networks). It is connected to the Internet and it works fine.

  3 laptop with Windows XP stopped seeing the network 4 days without any reason (but it can still detect the other networks of neighborhood, so the material is activated and it works). I had the network works for about 6 weeks. When I first tried to find the network (about 6 weeks ago) I had the same problem: the laptop could not see the network, but then I worked I had a few other internal network settings in my laptop after I removed it, it detected the Airport network. I even used Express Admin Airport utility (or sth like this) to set the WPA security for our network.

  4. to solve my problem now, I tried almost everything I found in apple.com forums and some other related forums this issue, but it seems that this problem is usually solved by chance.

  5. I tried to repair the network connection (by selecting repair in the settings), I removed the networks all the favourites, I had, I disabled all firewall, I tried with different laptop computer IP configuration (I know that he doesn t have nothing to do with the detection of the network, but I was frustrated). I even updated my WiFi drivers and the laptop cannot always detect Airport network (However it can see all the others who are in the region). There is no interference between the laptop and the Airport (the problem doesn t also depend on the distance between the laptop and the device).

  Please give me suggestions. Don't forget the laptop used to detect the network without any problem, and the Internet worked well.

  See you soon,.
  Jakub

  Hello Jakub

  You will be very happy if anyone has experiences with Apple Airport Express and can offer a concrete solution. After losing question have you tried to roll back OS to an earlier time using System Restore tool?

  When the OS works well and stable it is always good to create system restore points or do some sort of backup image. I do this all the time and I'm not worried if something goes wrong.

  Sorry, Jakub, but if you can't find an answer or solution on the apple forum I really don't think you will find it here. The fact is that the WLAN card works, but how to set it up with Apple Airport Express. I don't really know, but as you said already, maybe you need a chance.

• Mac does not see my printer "J611a"?

  Hello

  I have connected my printer to my router (it shows the name of the correct router if I run a config report), but does not see the printer on my Mac (when it is wireless).  Everything works fine if I connect to my Mac with a USB port.

  Any advice would be greatly appreciated.

  Thank you.  Stuart.

  Hi SRJC

  I understand that you cannot set up the printer on the wireless network.

  For me looks that you connect the USB cable from the printer to the router. Generally this method will not work.

  You need to configure the wireless through the printing software and add the printer on Mac.

  Given that the printer works via the USB on the Mac already then you can follow these steps:

  1. Click OK in the Menu bar above and then click Applications .

• I want to install a MB2320 of Maxify, but am not able to see the printer from my iPhone, airprint

  I want to install this printer and managed to communicate with her since my main PC via USB, LAN and Wireless LAN.  I noticed however was able to get the feature Airprint works.

  I also have intalled the Pixima/Maxify app on my iPhone and it says it can not see the printer.

  I read on line materials, but must be missing an important detail.

  OK, here is the "rest of the story.

  There is a setting where the Administraitor password can be completely removed.

  I removed it, and all my devices can connect to the printer via my wireless access Point.

  I say that Canon hotline has been the best exeriance I had with an assistance service.  3 calls, zero waiting, when I called back to work, the automated service knew it was me and saved all my information.  Support staff were helpful and courteous.  A reason more than I bought another Canon printer.

• Once more my automatic update of Vista stopped working today.

  Once more my automatic update of Vista stopped working today; It looks updates constantly and never ends. Set to automatic update was working yesterday the download and installation of Windows Defender - KB915597 (1.229.1407.0 and 1.229.1054.0 definitions).  This issue happened on August 9, 2016 when Windows Defender - KB915597 (definition 1.225.3489.0) has successfully installed on 8 August.

  Volume Z replied to my request for help the Oct 1 instruct me to download and run KB3185911 by his specific instructions.  This clear up my problem.  I tried to run this file (. Windows6 0-KB3185991-x 86.msu) still today after initial Volume Z instructions and received the notice, it did not apply to my system.

  The issue was revived by the release yesterday of KB3191203.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53972

  Best regards, VZ

• Vista stops himself and goes to a blue screen with the error code debug_usb_code.

  Vista stops himself, and a blue screen appears with a debug_usb_code.  I have problems with windows shut.  Tried a restore point.  Finished in the configuration of the system and found that the windows Defender has been the origin of the problem at startup.  I disabled it, and the computer is now in operation.  However, it is slow, sometimes crashes after about an hour, it will be stopped by itself and give the code mentioned above on a blue screen error.  Then it will restart by itself.  Please help!

  Run systempropertiesadvanced.exe and in the startup and recovery section, click settings.  Then uncheck 'automatically restart '.

• Get the error as a broker for Vista stopped working when trying to start the Webex session

  Original title: broker for vista stopped working

  Anyone know what this means?  I get this message every time I try to open a Webex session.   I work under Vista

  Hello

  The question you posted would be better suited in the Cisco Forums. I would recommend posting your query in the Cisco Forum site:

  https://supportforums.Cisco.com/index.jspa