Windows 7 latop stopped to 'see' the printer wireless

Similar Questions

• How to force the Win7 to see the printer wireless

  I installed the software for my HP6310 printer on my laptop Presario CQ56 but he did not see my printer wireless networking so she set up a second printer connected. How can I force the HP Solution Center to use a wireless please. O/s is win7 SP2.

  Thank you

  Teriel9

  teriel9 wrote:
  

  I installed the software for my HP6310 printer on my laptop Presario CQ56 but he did not see my printer wireless networking so she set up a second printer connected. How can I force the HP Solution Center to use a wireless please. O/s is win7 SP2.

  Thank you

  Teriel9

  I don't see 802.11 a/b/g/n wireless as a capacity of connectivity for each model (6310 and 6310xi) of your printer. It is most likely the reason why your laptop is not 'see' it.

  There is a bluetooth wireless connectivity. It's a different way of connection that allows only printing capacity.

  You give more than the number of series in your laptop so I have no idea if bluetooth wireless is installed as a standard option. If it is not installed, you must buy a bluetooth dongle to wWalMart and set it up to use that feature.

  Best regards
  ERICO

• Samsung S5 does not see the printer wireless

  I just bought this printer last night, I put in place using a laptop that sits on the wireless network and the laptop connects to the printer very well via wifi.  I downloaded the app HP AIO Remote for android phone went through the setup and when it gets to the point of looking for and finding the printer says that no printers are.  I tried to restart the phone, uninstall and reinstall the application, I tried HP ePrint app and still no luck.  The notebook computer always connects to the printer and my office to connect via USB.  I use the good app?  Is there something that I am missing?  Help, please!

  67SS wrote:

  ....   The notebook computer always connects to the printer and my office to connect via USB.  ....

  Hello

  No, your printer must be on a wireless network WITH the Samsung, otherwise your Samsung can't see. You can use a direct impression, but you need to your printer supports this feature.

  The easiest way: connect your printer to your network home woreless and all devices in your House can share the printer. Moreover, what is your printer?

  Concerning

• Install HP does not see the printer in network, Windows DOES. Help!

  Hello

  I am trying to add my HP Officejet k8600dn to Windows 7 (32 bit) so I can scan, but the HP Installer (add device) can not see the printer. The unit is set up by cable to a switch on my network via an ethernet cable. If I go into the menu "Add a printer" Windows, I can install the printer very well. But I have to be able to scan and I don't know what to do.

  Tips on getting functional analysis if the HP software is unable to see my printer? Subnet mask and gateway on the printer are the same for the computer and the printer. I typed the correct IP address in the "Add a device" menu of HP, but he sees not just it. ARRGG!

  Thanks for any help!

  Hello

  I think that there is some confusion because the Officejet k8600dn is only a printer, it is not a multifunction device and does not provide the capability of scanning.

  You can find the specifications below:

  http://support.HP.com/us-en/document/c01287217

  If you have any different model printer, please specify the exact model.

  Kind regards

  Shlomi

• The Print Spooler Service has stopped. Restart the print spooler and try to print and make the same mistake.

  Recharging according to the printing software and get always the same error.

  Hello

  You must ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==================================

  Here is a troubleshooting guide for Windows 7 - Vista would be very similar.

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ==================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with the manufacturer of your printer and forums support.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
  http://wiki.blackviper.com/wiki/Print_Spooler

  BlackViper Windows 7 Service - default settings
  http://www.blackviper.com/Windows_7/servicecfg.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.

  Restart mail Windowas

  When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.

  Try to compact and repair the database (see www.oehelp.com/WMUtil/).  There is likely an inconsistency between what is really there and what think the database is where and who must reconcile the two.  So beware of interference from antivirus software which can cause these issues (see www.oehelp.com/OETips.aspx#3).

  Steve

• Windows speech recognition stops randomly with the error: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. »

  Original title: "the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not write. "And the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not be written.

  I have Windows Vista and I use speech recognition Windows, a lot of things. I have used it for years and have really learned to rely on it! Unfortunately, since a recent upgrade of windows installed, Windows speech recognition stops randomly in the middle of using it and it gives me the following error message: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. "And then it stops. When I open it again, it seems to open normally and it will work for varying amounts of time before it does again and I get a different error message.

  I tried to restart and it did not help at all. Please, can someone help me? Please?

  Hi Alicia,.

  1 update you tried to install?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Step 1:

  Check the updates that are installed recently.

  You can view the following link to check the installed updates:

  See the Windows updates are installed

  Step 2:

  You can uninstall these updates and try to install the update one at a time and check for the issue.

  Remove an update

  Method 3:

  You can also try a system restore to a restore point before the updates were installed.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Install HP Officejet 6500 E709n failure - can't see the printer on the network

  My HP Officejet 6500 E709n refuses to acknowledge that he is already on the network a specific IP address and used by other computers in my house. How can I get this software install to work?  I have to let Windows 7 install its own version, which worked (sort of).  I prefer having the center of solutions for scanning, but the HP install software (full version), in contrast to the MS Windows 7 software, can't find the printer on the network, even when I give the software the exact IP address.

  (Yes, I uninstalled all the pieces I had to uninstall in Control Panel by the NSB instructions re-re-re-install software page.)

  Hi rchimes,

  Thank you for the update. If you are unable to get the problem solved after using the doctor print and Scan follow the steps to scrub the software on the computer and then reinstall it.

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77752-2&CC=US&DLC=en&LC=en&os=4063&Product=3795406&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know what you find?

• Internet connection problem; A few days ago, my computer (Windows 7 OS) stopped connecting to the internet. DNS

  A few days ago, my computer (Windows 7 OS) stopped connecting to the internet. When I troubleshooted, it produces an error of "your computer seems to be configured correctly, but the device or resource (DNS server) does not. I Googled it and tried a lot of things that have been suggested - flushing the DNS, reseting the TCP/IP, etc... None of them worked. At the end of the day, I did a restore of the system to a restore point a few days before starting my computer having these problems and then it started working again. But whenever I have to stop and restart my computer, the problem happens again. Any help as to what could be the problem or how I can fix this problem would be much appreciated!

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

• using windows xp and do not see the bookmark button

  using windows xp, I don't see the button bookmarks on the right side of the screen. Is this normal? If not, how to fix it.

  The Bookmarks button on the right of the bookmarks toolbar when the menu bar is hidden and the orange Firefox button is visible.

• I want to install a MB2320 of Maxify, but am not able to see the printer from my iPhone, airprint

  I want to install this printer and managed to communicate with her since my main PC via USB, LAN and Wireless LAN.  I noticed however was able to get the feature Airprint works.

  I also have intalled the Pixima/Maxify app on my iPhone and it says it can not see the printer.

  I read on line materials, but must be missing an important detail.

  OK, here is the "rest of the story.

  There is a setting where the Administraitor password can be completely removed.

  I removed it, and all my devices can connect to the printer via my wireless access Point.

  I say that Canon hotline has been the best exeriance I had with an assistance service.  3 calls, zero waiting, when I called back to work, the automated service knew it was me and saved all my information.  Support staff were helpful and courteous.  A reason more than I bought another Canon printer.

• OfficeJet 6500 printer a wireless set up correctly, but my laptop does not see the printer.

  E710 OfficeJet 6500 a Plus

  Laptop Dell Windows 7 64 bit version

  The printer is set to work wireless.

  I have the printer set in place.  I could print my wireless test report and have determined "That I have successfully setup my printer wireless."  But when I try to configure the printer on my computer and it asks IP... I give the IP address and it did not recognize the "Can't find printer" looks like I have witnessed this process again and again today.

  I disabled my firewall by following the instructions.

  I used the tool for "troubleshooting your connection to a network printer" stage 5 "

  Then he told me to go to the HP support forum.

  Help, please.

  Thank you

  DB64

  I had charged down the bad print driver.  My printer is a more... years had loaded the wrong printer driver.

• my collection-windows photo gallery stops working in the first 5 seconds

  my collection-windows photo gallery stops working in the first 5 seconds

  No guarantee... but following Microsoft "don't fix" may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Photo and slideshow problems
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us

• I have a HP officejet K-550dtn. New wireless n router. I can't get the router to see the printer.

  This printer used to work properly as a network using Actiontec or Linksys printer b/g router.  I upgraded my network for a 802.11n system and I cannot get the new router to see the printer.  After several hours of fighting, I find that the printer configuration page shows its IP address as 192.168.1.103.  Unfortunately, the DHCP server on the new router uses address 192.168.0.100 - 192.168.0.200 only.

  The disc that came with the printer does not work in one of my computers, because the BONE is newer than Win XP.

  Any ideas on how I can change the internal IP address of the printer to something the router will recognize?

  I wouldn't get rid of this printer, since it is always does a great job.

  (I can still print to the printer with a computer server network address to which it is connected by a USB cable, but requiring everyone goes up to this computer before making the print command in order to ensure that it is not hibernation.)  If I can't print directly via the router, I think I will return the router and go slowly until I can't take it anymore.

  Thank you

  Dweezel

  I finally understood that.  Here's how, in case someone else meets this.

  I don't mention that there is a Verizon FIOS router behind the wireless-n router, and it uses the model of 192.168.1.XXX.

  On a hunch, I ping the FIOS router, and there was a response.  The K-550 ethernet cable was plugged into the wireless n router and I tried it ping 192.168.1.103.  No response.  I then connected the ethernet printer cable in one of the connectors of the FIOS router replacement.  He ping again and got 4 beautiful quick returns.

  I moved to one of the computers on the wireless network and checked to see if the printer was there.  Joy!  There were two cases.  One was the connection recently configured via the USB port on the server computer.  The second was through the previously used x.x.x.103 port.  I can print using this forum, and I made it the default printer.

  It had not occurred to me to use a port across the wireless n router.

  Dweezel